TGL2201-SM Wideband Dual Stage VPIN Limiter Applications * * LNA Receiver Chain Protection Military Radar Product Features * * * * * * * Functional Block Diagram 2-12 GHz Passive, High Isolation Limiter Low Loss < 1.0 dB , X-band Return Loss > 10 dB Flat Leakage < 18 dBm Input Power CW Survivability up to 5W Integrated DC Block on both input and output Package dimensions 3.0 x 3.0 x 1.35 mm 4 3 2 1 5 16 6 15 7 14 8 13 9 10 11 12 General Description Pin Configuration The TriQuint TGL2201-SM is a packaged dual stage GaAs VPIN Limiter that operates over the 2 to 12 GHz band. Vertical PIN diodes provide the limiting action at high input signal levels and low loss at small signals. The TGL2201-SM is suitable for a variety of wideband systems such as LNA/receiver protection in radars, phased arrays, and jammers. Pin # Symbol 6, 7 14, 15 5, 8, 13, 16 2, 3, 10, 11 1, 4, 9, 12 RF IN/OUT RF OUT/IN N/C N/C GND Lead-free and RoHS compliant Ordering Information Part No. ECCN TGL2201-SM TGL2201-SM T/R EAR99 Description Wideband VPIN Limiter Wideband VPIN Limiter T/R Standard Order Quantity = 100 pieces in a waffle pack Standard T/R size = 500 pieces on a 7" reel. Preliminary Data Sheet: Rev C 7/24/12 (c) 2012 TriQuint Semiconductor, Inc. - 1 of 11 - Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network(R) TGL2201-SM Wideband Dual Stage VPIN Limiter Specifications Absolute Maximum Ratings Parameter Recommended Operating Conditions Rating Parameter Storage Temperature -55 to 150 oC RF Input Power, CW, 50,T = 25C 37 dBm Mounting Temperature 260 oC Min Typ Max Units Passive - no bias Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. Operation of this device outside the parameter ranges given above may cause permanent damage. Electrical Specifications Test conditions unless otherwise noted: 25C Parameter Conditions Operational Frequency Range Insertion Loss Input Return Loss Output Return Loss Output Power Preliminary Data Sheet: Rev C 7/24/12 (c) 2012 TriQuint Semiconductor, Inc. Min Typical 2 10 10 Input Power = 27dBm - 2 of 11 - 0.5 12 12 +18 Max 12 1.0 Units GHz dB dB dB dBm Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network(R) TGL2201-SM Wideband Dual Stage VPIN Limiter Typical Performance Return Loss vs. Frequency vs. Temperature 0.0 0 0.5 5 Return Loss (dB) Insertion Loss (dB) Insertion Loss vs. Frequency vs. Temperature 1.0 1.5 2.0 -55C +25C +85C 2.5 -55C +25C +85C 10 15 20 25 3.0 30 0 2 4 6 8 10 12 14 16 18 20 0 2 4 Frequency (GHz) 6 8 10 12 14 16 18 20 Frequency (GHz) Output Power vs. Input Power vs. Temperature Frequency: 10 GHz Output Power (dBm) 20 15 10 -55C +25C +85C 5 0 5 10 15 20 25 30 35 40 Input Power (dBm) Preliminary Data Sheet: Rev C 7/24/12 (c) 2012 TriQuint Semiconductor, Inc. - 3 of 11 - Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network(R) TGL2201-SM Wideband Dual Stage VPIN Limiter Application Circuit Schematic 3 4 2 1 U1 5 RF IN/OUT Z0 = 50 16 6 15 7 14 8 13 GND 17 9 10 11 RF OUT/IN Z0 = 50 12 Notes: 1. A heatsink is recommended for high power operation (RF input > 1 W). Preliminary Data Sheet: Rev C 7/24/12 (c) 2012 TriQuint Semiconductor, Inc. - 4 of 11 - Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network(R) TGL2201-SM Wideband Dual Stage VPIN Limiter Pin Description 17 Pin Symbol Description 6, 7 RF IN/OUT Input or output, matched to 50 ohms 5, 8, 13, 16 N/C No internal connection; should be left open on PCB 2, 3, 10, 11, 1, 4, 9, 12 RF OUT/IN N/C GND 17 GND 14, 15 Preliminary Data Sheet: Rev C Output or input, matched to 50 ohms No internal connection; may be grounded or left open on PCB Pins 1,4,9, and12 connected to 17 (backside paddle) inside package. On PCB, multiple vias should be employed under 17 to minimize inductance and thermal resistance; see page 8 for suggested mounting configuration. 7/24/12 (c) 2012 TriQuint Semiconductor, Inc. - 5 of 11 - Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network(R) TGL2201-SM Wideband Dual Stage VPIN Limiter Applications Information PC Board Layout Top RF layer is 0.008" thick Rogers RO4003, r = 3.55. Metal layers are 1-oz copper. Microstrip 50 line width is .0174". The microstrip line tapers to a 0.014" width at the connector interface. This PCB is designed for the Southwest Microwave end launch connector 1092-01A-5. The pad pattern shown has been developed and tested for optimized assembly at TriQuint Semiconductor. The PCB land pattern has been developed to accommodate lead and package tolerances. Since surface mount processes vary from company to company, careful process development is recommended. For further technical information, refer to the TGL2201SM Product Information page. Preliminary Data Sheet: Rev C 7/24/12 (c) 2012 TriQuint Semiconductor, Inc. - 6 of 11 - Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network(R) TGL2201-SM Wideband Dual Stage VPIN Limiter Mechanical Information Package Information and Dimensions (Units:Millimeters) 2201 YYWW XXXX This package is lead-free/RoHS-compliant. The package base is Aluminum Nitride and the plating material on the leads is gold over nickel (Au-Ni). This package is compatible with both lead free and tin-lead soldering processes. The lid is plastic. The TGL2201-SM will be marked with the "2201" designator and a lot code marked below the part designator. The "YY" represents the last two digits of the year the part was manufactured, the "WW" is the work week, and the "XXXX" is an auto-generated number. Preliminary Data Sheet: Rev C 7/24/12 (c) 2012 TriQuint Semiconductor, Inc. - 7 of 11 - Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network(R) TGL2201-SM Wideband Dual Stage VPIN Limiter Mechanical Information (cont.) Mounting Configuration Notes: 1. Ground / thermal vias are critical for the proper performance of this device. Vias should use a .35mm (#80 / .0135") diameter drill and have a final plated thru diameter of 0.25 mm (.010"). 2. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. For further technical information, refer to the TGL2201-SM Product Information page. Preliminary Data Sheet: Rev C 7/24/12 (c) 2012 TriQuint Semiconductor, Inc. - 8 of 11 - Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network(R) TGL2201-SM Wideband Dual Stage VPIN Limiter Tape and Reel Information Tape and reel specifications for this part are also available on the TriQuint website in the "Application Notes" section. Standard T/R size = 500 pieces on a 7" reel. Part Feature Cavity Length Width Depth Preliminary Data Sheet: Rev C 7/24/12 (c) 2012 TriQuint Semiconductor, Inc. - 9 of 11 - Symbol Size (in) Size (mm) A0 B0 K0 0.130 0.130 0.059 3.30 3.30 1.50 Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network(R) TGL2201-SM Wideband Dual Stage VPIN Limiter Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, J Lead free solder, 260 ESD Rating: Value: Test: Standard: This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). Class 1B 500 V and < 1000 V Human Body Model (HBM) JEDEC Standard JESD22-A114 A114 MSL Rating Level 3 at +260 C convection reflow The part is rated ated Moisture Sensitivity Level 3 at 260C per JEDEC standard IPC/JEDEC J-STD-020. This product also has the following attributes: * Lead Free * Halogen Free (Chlorine, Bromine) * Antimony Free * TBBP-A (C15H12Br402) Free * PFOS Free * SVHC Free Recommended Soldering Temperature Profile Preliminary Data Sheet: Rev C 7/24/12 (c) 2012 TriQuint Semiconductor, Inc. - 10 of 11 - Disclaimer: imer: Subject to change without notice Connecting the Digital World to the Global Network(R) TGL2201-SM Wideband Dual Stage VPIN Limiter Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.972.994.8465 +1.972.664.8504 For technical questions and application information: Email: info-mmw@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright (c) 2012 TriQuint Semiconductor, Inc. All rights reserved. Preliminary Data Sheet: Rev C 7/24/12 (c) 2012 TriQuint Semiconductor, Inc. - 11 of 11 - Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network(R)