TGL2201-SM
Wideband Dual Stage VPIN Limiter
Preliminary
Data Sheet: Rev
C
7/24
/12
- 1 of 11 -
imer: Subject to change without
notice
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
®
Applications
• LNA Receiver Chain Protection
•
Military Radar
Product Features
Functional Block Diagram
•
2-12 GHz Passive, High Isolation Limiter
• Low Loss < 1.0 dB , X-band
• Return Loss > 10 dB
• Flat Leakage < 18 dBm
• Input Power CW Survivability up to 5W
• Integrated DC Block on both input and output
• Package dimensions 3.0 x 3.0 x 1.35 mm
General Description
Pin Configuration
The TriQuint TGL2201-
SM is a packaged dual stage GaAs
VPIN Limiter that operates over the 2 to 12
GHz band.
Vertical PIN diodes provide the limiting action at high
input signal levels and low loss at small signals.
The TGL2201-
SM is suitable for a variety of wideband
systems such as LNA/receiver protection in radars, phase
d
arrays, and jammers.
Lead-free and RoHS compliant
Pin # Symbol
6, 7 RF IN/OUT
14, 15 RF OUT/IN
5, 8, 13, 16 N/C
2, 3, 10, 11 N/C
1, 4, 9, 12 GND
Ordering Information
Part No. ECCN
Description
TGL2201-SM EAR99 Wideband VPIN Limiter
TGL2201-SM T/R
Wideband VPIN Limiter T/R
Standard Order Quantity = 100 pieces in a waffle pack
Standard T/R size = 500 pieces on a 7” reel.
1211109
16
15
14
13
5
6
7
8
1234
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Preliminary
Data Sheet: Rev
C
7/24
/12
- 2 of 11 -
imer: Subject to change without
notice
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
®
Specifications
Absolute Maximum Ratings
Parameter Rating
Storage Temperature -55 to 150
o
C
RF Input Power, CW, 50Ω,T = 25ºC 37 dBm
Mounting Temperature 260
o
C
Operation of this device outside the parameter ranges given
above may cause permanent damage.
Recommended Operating Conditions
Parameter Min
Typ Max Units
Passive – no bias
Electrical specifications are measured at specified test conditions.
Specifications are not guaranteed over all recommended operating
conditions.
Electrical Specifications
Test conditions unless otherwise noted: 25ºC
Parameter Conditions
Min Typical Max Units
Operational Frequency Range 2 12 GHz
Insertion Loss 0.5 1.0 dB
Input Return Loss 10 12 dB
Output Return Loss 10 12 dB
Output Power Input Power =
27dBm
+18 dBm
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Preliminary
Data Sheet: Rev
C
7/24
/12
- 3 of 11 -
imer: Subject to change without
notice
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
®
Typical Performance
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0 2 4 6 8 10 12 14 16 18 20
Insertion Loss (dB)
Frequency (GHz)
-55C
+25C
+85C
Insertion Loss vs. Frequency vs. Temperature
0
5
10
15
20
25
30
0 2 4 6 8 10 12 14 16 18 20
Return Loss (dB)
Frequency (GHz)
-55C
+25C
+85C
Return Loss vs. Frequency vs. Temperature
0
5
10
15
20
5 10 15 20 25 30 35 40
Output Power (dBm)
Input Power (dBm)
-55C
+25C
+85C
Output Power vs. Input Power vs. Temperature
Frequency: 10 GHz
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Preliminary
Data Sheet: Rev
C
7/24
/12
- 4 of 11 -
imer: Subject to change without
notice
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
®
Application Circuit
Notes:
RF OUT/IN
Z = 50
Ω
U1
Z = 50
Ω
0
GND
RF IN/OUT
17
0
8
7
6
5
9 10 11 12
16
13
14
15
432 1
1.
A heatsink is recommended for high power operation (RF input > 1 W).
Schematic
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Preliminary
Data Sheet: Rev
C
7/24
/12
- 5 of 11 -
imer: Subject to change without
notice
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
®
Pin Description
Pin
Symbol
Description
6, 7 RF
IN/OUT Input or output, matched to 50 ohms
5, 8, 13, 16 N/C No internal connection; should be left open on PCB
14, 15 RF
OUT/IN Output or input, matched to 50 ohms
2, 3, 10, 11,
N/C
No internal connection; may be grounded or left open on PCB
1, 4, 9, 12 GND Pins 1,4,9, and12 connected to 17 (backside paddle) inside package.
17 GND On PCB, multiple vias should be employed under 17 to minimize inductance and thermal
resistance; see page 8 for suggested mounting configuration.
17
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Preliminary
Data Sheet: Rev
C
7/24
/12
- 6 of 11 -
imer: Subject to change without
notice
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
®
Applications Information
PC Board Layout
Top RF layer is 0.008” thick Rogers RO4003, є
r
= 3.55.
Metal layers are 1-oz copper. Microstrip 50 Ω line width is
.0174”. The microstrip line tapers to a 0.014” width at the
connector interface. This PCB is designed for the
Southwest Microwave end launch connector 1092-01A-5.
The pad pattern shown has been developed and tested for
optimized assembly at TriQuint Semiconductor. The PCB
land pattern has been developed to accommodate lead and
package tolerances. Since surface mount processes vary
from company to company, careful process development
is recommended.
For further technical information, refer to the TGL2201-
SM Product Information page.
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Preliminary
Data Sheet: Rev
C
7/24
/12
- 7 of 11 -
imer: Subject to change without
notice
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
®
Mechanical Information
Package Information and Dimensions (
Units:Millimeters)
This package is lead
-free/RoHS-compliant. The package base is Aluminum Nitride and the plating
material on the leads is gold
over nickel (Au-Ni). This package is compatible with both lead free and tin-lead soldering processes. The lid is plastic.
The TGL2201-SM will be marked with the “2201” designator and a lot code marked below the part designator. The “YY”
represents the last two digits of the year the part was manufactured, the “WW” is the work week, and the “XXXX” is an
auto-generated number.
2201
YYWW
XXXX
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Preliminary
Data Sheet: Rev
C
7/24
/12
- 8 of 11 -
imer: Subject to change without
notice
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
®
Mechanical Information (cont.)
Mounting Configuration
Notes:
1. Ground / thermal vias are critical for the proper performance of this device. Vias should use a .35mm (#80 / .0135”) diameter drill and
have a final plated thru diameter of 0.25 mm (.010”).
2. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance.
3. For further technical information, refer to the TGL2201-SM Product Information page
.
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Preliminary
Data Sheet: Rev
C
7/24
/12
- 9 of 11 -
imer: Subject to change without
notice
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
®
Tape and Reel Information
Tape and reel specifications for this part are also available on the TriQuint website in the “Application Notes” section.
Standard T/R size = 500 pieces on a 7” reel.
Part
Feature
Symbol
Size (in)
Size (mm)
Cavity Length A0 0.130 3.30
Width B0 0.130 3.30
Depth K0 0.059 1.50
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Preliminary
Data Sheet: Rev
C
7/24
/12
© 2012 TriQuint Semiconductor, Inc.
Product Compliance Information
ESD Information
ESD Rating:
Class 1B
Value:
≥ 500 V and < 1000 V
Test:
Human Body Model (HBM)
Standard:
JEDEC Standard JESD22-
A114
MSL Rating
Level 3
at +260 °C convection reflow
The part is r
ated Moisture Sensitivity Level 3
JEDEC standard IPC/JEDEC J
-STD-020.
Recommended Soldering Temperature Profile
Wideband Dual Stage VPIN Limiter
- 10 of 11 -
imer: Subject to change without
Connecting the Digital World to the
Product Compliance Information
Human Body Model (HBM)
A114
Solderability
Compatible with the latest version of J
free solder, 260°
This part is
compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment).
This product also has the following attributes:
• Lead Free
•
Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C
15
H
12
Br
4
0
2
) Free
• PFOS Free
• SVHC Free
ated Moisture Sensitivity Level 3
at 260°C per
Recommended Soldering Temperature Profile
imer: Subject to change without
notice
Connecting the Digital World to the
Global Network
®
Compatible with the latest version of J
-STD-020, Lead
compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment).
This product also has the following attributes:
Halogen Free (Chlorine, Bromine)
) Free
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Preliminary
Data Sheet: Rev
C
7/24
/12
- 11 of 11 -
imer: Subject to change without
notice
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
®
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and information about
TriQuint:
Web: www.triquint.com Tel: +1.972.994.8465
Email: info-sales@tqs.com Fax: +1.972.664.8504
For technical questions and application information:
Email: info-mmw@tqs.com
Important Notice
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained
herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint
assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained
herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with
the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest
relevant information before placing orders for TriQuint products. The information contained herein or any use of such
information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property
rights, whether with regard to such information itself or anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining
applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.
Copyright © 2012 TriQuint Semiconductor, Inc. All rights reserved.