EMC filters
3-line filters
for converters and power electronics
Rated current 8 to 200 A
Series/Type: B84143B*R110
Date: January 2006
EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the
information contained therein without EPCOS’ prior express consent is prohibited.
3-line filters B84143B*R110
for converters and power electronics
Power line filters for 3-phase systems
Rated voltage 520/300 V AC, 50/60 Hz
Rated current 8 to 200 A
Construction
■ 3-line filter
■ Metal case
■ Book size
Features
■ Very high insertion loss
■ Optimized leakage current
■ Space saving by optimized footprint
■ Litz wires on the load side reduce mounting time
■ Low weight
■ Degree of protection: IP 201)
■ Optimized for long motor cables and operation
under full load
■ Design complies with
EN 133200, UL 1283, CSA C22.2 No.8
■ UL and cUL approval pending
Applications
■ Frequency converters for motor drives, e.g.
elevators, pumps, traction systems, conveyor systems,
HVAC systems (heating, ventilation and air conditioning)
■ Wind farms
■ Power supplies
Terminals
■ Line side: Finger-safe terminal blocks
■ Load side: Litz wires
Marking
Marking on component:
Manufacturer’s logo, ordering code,
rated voltage, rated current, rated temperature,
climatic category, date code
Minimum marking on packaging:
Manufacturer’s logo, ordering code
1) To IEC 60529
Please read Cautions and warnings and
Important notes at the end of this document. 01/06 2
3-line filters B84143B*R110
for converters and power electronics
Typical circuit diagrams
Filters for 8 and 16 A
LINE LOAD
L1
SSB1526-A
L1’
L2 L2’
L3 L3’
Filters for 25 … 200 A
LINE LOAD
L1
SSB1527-I
L1’
L2 L2’
L3 L3’
Please read Cautions and warnings and
Important notes at the end of this document. 01/06 3
3-line filters B84143B*R110
for converters and power electronics
Technical data and measuring conditions
Rated voltage VR 520/300 V AC, 50/60 Hz
Rated current IR Referred to 40 °C ambient temperature
Test voltage Vtest 1770 V DC, 2 s (line/line)
2700 V DC, 2 s (lines/case)
Overload capability (thermal) 1.5 · IR for 3 min per hour or
2.5 · IR for 30 s per hour
Leakage current Ileak At 480 V AC, 50 Hz
Climatic category (IEC 60068-1) 25/100/21 (– 25 °C/+ 100 °C/21 days damp heat test)
Approvals UL 1283 and CSA C22.2 No.8 pending
Characteristics and ordering codes
VR
AC
V
IR
A
Terminal cross section Ileak
mA
Rtyp
mΩ
Approx.
weight
kg
Ordering code
Line side:
terminal
blocks
mm2
Load side:
litz
wires
mm2
520/300 8 4 1.5 < 14 26 1.5 B84143B0008R110
16 4 2.5 < 14 13 1.5 B84143B0016R110
25 6 4 < 14 10 2.7 B84143B0025R110
36 6 6 < 14 6.5 3.2 B84143B0036R110
50 16 10 < 14 4.3 3.7 B84143B0050R110
66 25 16 < 14 2.7 4.3 B84143B0066R110
90 25 25 < 14 2.0 7.7 B84143B0090R110
120 50 35 < 14 1.4 8.3 B84143B0120R110
150 50 35 < 14 0.9 9.7 B84143B0150R110
200 95 70 / 351) < 14 0.5 13.5 B84143B0200R110
1) PE litz wire
Please read Cautions and warnings and
Important notes at the end of this document. 01/06 4
3-line filters B84143B*R110
for converters and power electronics
Dimensional drawings
B84143B0008R110, B84143B0016R110 (8 and 16 A)
80
40
50 300±10
Wire end ferrule
15
31
PE M6 x 24
0.5
200
1
Litz wire
Litz wire markings
230
Terminal blocks 4 mm 2
6.5
46
Marking
LOADLINE
25±0.3
Tightening torque 0.6 ... 0.8 Nm 215±0.5
PE
L3
L2
L1
PE
L3’
L2’
L1’
SSB2188-F-E
B84143B0025R110 (25 A)
400±10
PE M6 x 24
30
75
60
250
0.5
1
Litz wire
Wire end ferrule
60
150
Litz wire markings
35±0.3
Tightening torque 0.6 ... 0.8 Nm
280
265±0.5
6.5
56
Marking
LOADLINE
L3
PE
L1
L2
L3’
PE
L2’
L1’
Terminal blocks 4 mm
2
SSB2189-N-E
Please read Cautions and warnings and
Important notes at the end of this document. 01/06 5
3-line filters B84143B*R110
for converters and power electronics
B84143B0036R110 (36 A)
150
75
60 400±10
PE M6 x 24
30
60
250
0.5
1
Litz wire
Wire end ferrule
Litz wire markings
280
Terminal blocks 6 mm
2
35±0.3
Tightening torque 1.5 ... 1.8 Nm 265±0.5
6.5
56
Marking
LOADLINE
L3
PE
L1
L2
L3’
PE
L2’
L1’
SSB2190-R-E
B84143B0050R110 (50 A)
60 300 500±10
30
0.5
1
PE M6 x 24
Litz wire
315±0.5
56
35±0.3
6.5
330
52
Litz wire markings
Wire end ferrule
Terminal blocks 16 mm
Tightening torque 2 ... 2.3 Nm
2
Marking
LOADLINE
L3
PE
L2
L1
L3’
PE
L2’
L1’
75
150
SSB2191-Z-E
Please read Cautions and warnings and
Important notes at the end of this document. 01/06 6
3-line filters B84143B*R110
for converters and power electronics
B84143B0066R110 (66 A)
150
75
80
Wire end ferrule
30
52
PE M10 x 39
300
0.5
1
Litz wire
500±10
60
Tightening torque 4 ... 4.5 Nm
Terminal blocks 25 mm
2
315±0.5
330 Litz wire markings
6.5
55±0.3
76
Marking
LOADLINE
L3
PE
L2
L1
L3’
PE
L2’
L1’
SSB2192-8-E
B84143B0090R110 (90 A)
100
80
30
PE M10 x 39
300
1
0.5
500±10
Litz wire
52
60
Wire end ferrule
200
Litz wire markings
315±0.5
330
6.5
55±0.3
76
Terminal blocks 25 mm
Tightening torque 4 ... 4.5 Nm
2
LOAD
Marking
PE LINE
L1
L2
L3
L1’
L2’
L3’
PE
SSB2193-G-E
Please read Cautions and warnings and
Important notes at the end of this document. 01/06 7
3-line filters B84143B*R110
for converters and power electronics
B84143B0120R110, B84143B0150R110 (120 and 150 A)
90 350 500±10 Wire end ferrule
200
100
40
0.5
1
365±0.5
Litz wire
380
65±0.3
86
6.5
78
Litz wire markings
Tightening
Terminal
torque 6 ... 8 Nm
blocks 50 mm
2
65
PE M10 x 39
Marking
LOADLINE
L3
PE
L2
L1
L3’
PE
L2’
L1’
SSB2194-P-E
B84143B0200R110 (200 A)
110
PE M10 x 39
30
79
Litz wire
0.5
1
80
110 400 500±10 Wire end ferrule
220
PE litz wire 35 mm
2
Litz wire markings
Terminal 430
torque 15 ... 20 Nm
blocks 95 mm
Tightening
2
415±0.5
106
85±0.3
6.5
L1
PE
L2
L3
L1’
L2’
L3’
PE
Marking
LINE LOAD
SSB2195-X-E
Please read Cautions and warnings and
Important notes at the end of this document. 01/06 8
3-line filters B84143B*R110
for converters and power electronics
Insertion loss (typical values at Z = 50 Ω)
unsymmetrical, adjacent branches terminated
common mode, all branches in parallel (asymmetrical)
differential mode (symmetrical)
Filters for 8 and 16 A Filters for 25 and 36 A
SSB1528-R
SSB1529-Z
120
B84143B0008R110
B84143B0016R110
120
dB
dB
α 100
α 100
80
80
60
60
40
40
20
20
0
0
10
4
10
5
10
6
10
7
Hz 10
8
10
4
10
5
10
6
10
7
Hz 10
8
f
f
B84143B0025 ... B0036R110
Filters for 50 A Filters for 66 A
120
SSB1530-3
120
SSB1531-B
dB
dB
α 100
α 100
B84143B0050R110
80
60
40
20
0
10
4
10
5
10
6
10
7
Hz 10
8
f
80
60
40
20
0
10
4
10
5
10
6
10
7
Hz 10
8
f
B84143B0066R110
Please read Cautions and warnings and
Important notes at the end of this document. 01/06 9
3-line filters B84143B*R110
for converters and power electronics
Insertion loss (typical values at Z = 50 Ω)
unsymmetrical, adjacent branches terminated
common mode, all branches in parallel (asymmetrical)
differential mode (symmetrical)
Filters for 90 and 120 A Filters for 150 and 200 A
SSB1532-J
SSB1533-S
120
120
dB
dB
α 100
α 100
B84143B0090 ... B0120R110
80
60
40
20
0
10
4
10
5
10
6
10
7
Hz 10
8
f
80
60
40
20
0
104 10 5 106 107 Hz 108
f
B84143B0150R110
B84143B0200R110
Please read Cautions and warnings and
Important notes at the end of this document. 01/06 10
EMC filters
Cautions and warnings
Important information
Please read all safety and warning notes carefully before installing the EMC filter and putting it into
operation (see ). The same applies to the warning signs on the filter. Please ensure that the signs
are not removed nor their legibility impaired by external influences.
Death, serious bodily injury and substantial material damage to equipment may occur if the appro-
priate safety measures are not carried out or the warnings in the text are not observed.
Using according to the terms
The EMC filters may be used only for their intended application within the specified values in low-
voltage networks in compliance with the instructions given in the data sheets and the data book.
The conditions at the place of application must comply with all specifications for the filter used.
Warnings
■ It shall be ensured that only qualified persons (electricity specialists) are engaged on work such
as planning, assembly, installation, operation, repair and maintenance. They must be provided
with the corresponding documentation.
■ Danger of electric shock. EMC filters contain components that store an electric charge. Danger-
ous voltages can continue to exist at the filter terminals for longer than five minutes even after
the power has been switched off.
■ The protective earth connections shall be the first to be made when the EMC filter is installed and
the last to be disconnected. Depending on the magnitude of the leakage currents, the particular
specifications for making the protective-earth connection must be observed.
■ Impermissible overloading of the EMC filter, such as impermissible voltages at higher frequen-
cies that may cause resonances etc. can lead to destruction of the filter housing.
■ EMC filters must be protected in the application against impermissible exceeding of the rated
currents by suitable overcurrent protective.
11 01/06
EMC filters
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of
suitable design of the customer application or other action taken by the customer (e.g.
installation of protective circuitry or redundancy) that no injury or damage is sustained by third
parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, EPCOS-Jones, Baoke, CeraDiode, CSSP, MLSC, PhaseCap,
PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are
trademarks registered or pending in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.
12 01/06
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
EPCOS:
B84143B150R110
EPCOS / TDK:
B84143B66R110 B84143B90R110 B84143B25R110 B84143B36R110 B84143B200R110 B84143B120R110
B84143B8R110 B84143B50R110 B84143B16R110 B84143B0150R110 B84143B0008R110 B84143B0120R110
B84143B0050R110 B84143B0066R110 B84143B0200R110 B84143B0090R110 B84143B0016R110
B84143B0036R110 B84143B0025R110
