MATP/MATL SERIES PAGE ONE OF THREE %2$5'0281762&.(7 5HFWDQJXODU7DLO(OHYDWHG FEATURES Chamfered entry prevents pin stubbing High reliability tuning fork contact Standoffs reduce rework due to flux residue Low Insertion Force (LIF) versions available Mates with PEG, MPEG, DPEG, LPEG, TPEG Headers SINGLE ROW (1 to 36 Positions) STANDARD PART DIMENSIONS INSULATOR BODY (TOP) Single Row Dual Row W1 WIDTH 0.100" / 2,54mm 0.200" / 5,08mm H1 HEIGHT 0.325" / 8,25mm 0.325" / 8,25mm Single Row Dual Row INSULATOR BODY (BOTTOM) W2 WIDTH 0.096" / 2,44mm 0.198" / 5,03mm H2 HEIGHT 0.098" / 2,49mm 0.098" / 2,49mm S STANDOFF 0.015" / 0,38mm 0.015" / 0,38mm Single Row Dual Row OVERALL HEIGHT TH TOTAL IH INSTALLED DUAL ROW (2 to 72 Positions) Please refer to the chart on the next page MATERIALS INSULATOR Glass Filled Polyester (UL94V-O) CONTACT Phosphor Bronze See SPECIFICATIONS and PERFORMANCE DATA for more information. Elevated Sockets available in a SOLID STACK option as well. SAMPLE HOTLINE: 1-800-676-7644 CRANE CONNECTORS * 4700 Smith Road * Cincinnati, Ohio 45212 USA * E-mail Address: info@craneconnectors.com Phone: (513) 631-4700 * Fax (513) 631-5700 * Toll Free US (800) 676-7644 * Canada (800) 420-7310 MATP/MATL SERIES PAGE TWO OF THREE HOW TO ORDER CRANE'S MATP/MATL SERIES 0.100" (2,54mm) Centers To Mate With 0.025" (0,64mm) Square Mating Posts STANDARD PART NUMBER -- PRODUCT SERIES MAT HIGH TEMP OPTION GMAT CONTACT STANDARD P NOTE: LIF not available with tin plating. LIF FORCE L NUMBER OF POSITIONS SINGLE 01-36 DUAL 02-72 NUMBER OF ROWS SINGLE S DUAL D TYPE OF SOCKET STRAIGHT PLATING (See Plating Specifications Below) CHOOSE G, T or M,H,L,F -- S NOTE: Some platings may be subject to minimums. Tin plating is not available on LIF sockets. RECTANGULAR TAIL 0.016" / 0,41mm x 0.030" / 0,76mm KINKED INSULATOR SPACERS K SOLID STACK A SINGLE INSULATOR AT BOTTOM B SELECTED OPTIONS Many other sizes are available. Please contact the factory and give us your EXACT requirements. TYPE A R INSTALLED HEIGHT "B" TOTAL HEIGHT "D" 0.400" = B 0.525" = F B F 0.435" = C 0.525" = F C F 0.435" = C 0.725" = N C N 0.435" = C 0.915" = T C T 0.500" = G 0.725" = N G N 0.535" = H 0.725" = N H N 0.535" = H 0.915" = T H T 0.600" = L 0.725" = N L N 0.635" = M 0.725" = N M N 0.635" = M 0.915" = T M T 0.700" = Q 0.915" = T Q T 0.735" = R 0.915" = T R T 0.800" = V 0.915" = T V T 0.835" = W 0.915" = T W T TYPE B Crane's MATP Series can be used with our MPEG Series for ULTRA-HIGH board stacking needs. CRANE CONNECTORS - PLATING SPECIFICATIONS PLATING OPTIONS CONTACT AREA Inches (Millimeters) PC TAIL Inches (Millimeters) UNDERPLATE Inches (Millimeters) 15)" (0,,00038) Gold 100)" (0,00254) Tin/Lead - Min 50)" (0,00127) Nickel - Min. 100)" (0,00254) Tin / Lead 100)" (0,00254) Tin/Lead - Min 50)" (0,00127) Nickel - Min. G Selective T Tin / Lead M Selective 50)" (0,00127) Gold 100)" (0,00254) Tin/Lead - Min 50)" (0,00127) Nickel - Min. H Selective 30)" (0,00076) Gold 100)" (0,00254) Tin/Lead - Min 50)" (0,00127) Nickel - Min. L Selective 10)" (0,00025) Gold 100)" (0,00254) Tin/Lead - Min 50)" (0,00127) Nickel - Min. F Selective 3)" (0,00008) Gold 100)" (0,00254) Tin/Lead - Min 50)" (0,00127) Nickel - Min. STANDARDS ISO9001 UL File No. E120111 (N) Crane Connectors File No. A-3620 Recognized to U.S. and Canadian requirements under the Component Recognition Program of Underwriters Laboratories Inc. Registered by UL to ISO9001 under UL's accreditation by Raad voor de Certificatie (RvC), the Dutch Council for Certification. ENGINEERING NOTE: The information presented in this catalog page is accurate to the best of our knowledge. Due to ongoing efforts to advance design and material performance, the information is subject to change without notice. SAMPLE HOTLINE: 1-800-676-7644 CRANE CONNECTORS * 4700 Smith Road * Cincinnati, Ohio 45212 USA * E-mail Address: info@craneconnectors.com Phone: (513) 631-4700 * Fax (513) 631-5700 * Toll Free US (800) 676-7644 * Canada (800) 420-7310