MGA-31189
0.25W High Gain Driver Ampli er
50 – 2000 MHz
Data Sheet
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model = 100 V
ESD Human Body Model = 400 V
Refer to Avago Application Note A004R:
Electrostatic Discharge, Damage and Control.
Description
Avago Technologies MGA-31189 is a 0.25W high gain
with good gain  atness Driver Ampli er MMIC, housed
in a standard SOT-89 plastic package. The device features
high linearity performance, excellent input and output
return loss, and low noise  gure. The device can be easily
matched to obtain optimum power and linearity.
MGA-31189 is externally tunable to operate within 50MHz
to 2GHz frequency range applications. With high IP3, low
noise  gure and wideband operation, the MGA-31189 can
be utilized as a driver ampli er in the transmit chain and
as a second stage LNA in the receive chain.
This device uses Avago Technologies proprietary 0.25um
GaAs Enhancement mode PHEMT process.
Pin connections and Package Marking
Notes:
Top View : Package marking provides orientation and identi cation
“11” = Device Code
“X” = Date Code character identi es month of manufacturing
Features
 ROHS compliant
 Halogen free
 Very high linearity at low DC bias power [1]
 High Gain
 Good gain  atness
 Low noise  gure
 Excellent uniformity in product speci cation
 SOT-89 standard package
Speci cations
At 0.9GHz, Vdd = 5V, Idd = 111mA (typ) @ 25°C
 OIP3 = 42dBm
 Noise Figure = 2.0dB
 Gain = 21dB; Gain Flatness (+/-50MHz) = 0.1dB
 P1dB = 24 dBm
 IRL = 15.6dB, ORL = 12.8dB
Note:
1. The MGA-31189 has a superior LFOM of 14.5dB. Linearity Figure of
Merit (LFOM) is essentially OIP3 divided by DC bias power.
Figure 1. Simpli ed Schematic diagram
LRFout
C
C
RFin
Vdd
C
C
11X
Top View
RFin GND RFout
#1 #2 #3
Bottom View
RFout GND RFin
#3 #2 #1
2
MGA-31189 Absolute Maximum Rating[1] TA=25°C
Symbol Parameter Units Absolute Maximum
Id,max Drain Current mA 150
Vd,max Device Voltage V 5.5
PdPower Dissipation [2] mW 825
Pin,max CW RF Input Power dBm 25
Tj,max Junction Temperature °C 150
Tstg Storage Temperature °C -65 to 150
Thermal Resistance
Thermal Resistance [3]
(Vd = 5.0V, Tc = 85°C) jc = 54.5°C/W
Notes:
1. Operation of this device in excess of any of
these limits may cause permanent damage.
2. Board temperature (Tc) is 25°C, for Tc > 105°C
derate the device power at 18.3mW/°C rise
in board temperature adjacent to package
bottom.
3. Thermal resistance measured using Infrared
measurement technique.
MGA-31189 Electrical Speci cations [1]
TA = 25°C, Vd = 5V, unless noted
Symbol Parameter and Test Condition Frequency Units Min. Typ. Max.
Ids Quiescent current N/A mA 93 111 128
NF Noise Figure 0.45GHz
0.9GHz
1.5GHz
dB –
2.7
2.0
1.8
2.6
Gain Gain 0.45GHz
0.9GHz
1.5GHz
dB 19
21
21
20
23
OIP3 [2] Output Third Order Intercept Point 0.45GHz
0.9GHz
1.5GHz
dBm 39.2
41.5
42
41.3
–
P1dB Output Power at 1dB Gain Compression 0.45GHz
0.9GHz
1.5GHz
dBm 22.3
23.7
24
24.4
–
PAE Power Added E ciency at P1dB 0.45GHz
0.9GHz
1.5GHz
%–
42.7
42.5
44.3
–
IRL Input Return Loss 0.45GHz
0.9GHz
1.5GHz
dB –
22.9
15.6
15.9
–
ORL Output Return Loss 0.45GHz
0.9GHz
1.5GHz
dB –
10
12.8
16
–
ISOL Isolation 0.45GHz
0.9GHz
1.5GHz
dB –
27.9
27.6
27.5
–
Notes:
1. Typical performance obtained from a test circuit described in Figure 34.
2. OIP3 test condition: F1 - F2 = 10MHz, with input power of -12dBm per tone measured at worst case side band.
3
100 110 120 130 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8
18 19 20 21 22 23 24 25 39 40 41 42 43 44 45
22 23 24 25 26
MGA-31189 Consistency Distribution Chart (1, 2)
Figure 2. Idd @ 900MHz, Vdd = 5V, LSL=93mA, Nominal=111mA, USL=128mA Figure 3. NF @ 900MHz, Vdd = 5V, Nominal=2dB, USL=2.6dB
Figure 6. P1dB @ 900MHz, Vdd = 5V, LSL=22.3dBm, Nominal=24dBm
Figure 4. Gain @ 900MHz, Vdd = 5V, LSL=19dB, Nominal=21dB, USL=23dB Figure 5. OIP3 @ 900MHz, Vdd = 5V, LSL=39.2dBm, Nominal=42dBm
Notes:
1. Data sample size is 3500 samples taken from 4 di erent wafers and
2 di erent lots. Future wafers allocated to this product may have
nominal values anywhere between the upper and lower limits.
2. Measurements are made on production test board which represents
a trade-o between optimal Gain, NF, OIP3 and OP1dB. Circuit losses
have been de-embedded from actual measurements.
4
MGA-31189 Application Circuit Data for 450MHz
TA = 25°C, Vd = 5.0V, Id = 111mA
Figure 7. OIP3 vs Frequency and Temperature Figure 8. P1dB vs Frequency and Temperature
Figure 9. Gain vs Frequency and Temperature Figure 10. IRL vs Frequency and Temperature
Figure 11. ORL vs Frequency and Temperature Figure 12. Isolation vs Frequency and Temperature
36
38
40
42
44
46
48
50
52
150 250 350 450 550 650 750
Frequency (MHz)
OIP3 (dBm)
85°C
25°C
-40°C
10
12
14
16
18
20
22
150 250 350 450 550 650 750
Frequency (MHz)
Gain (dB)
21.0
21.5
22.0
22.5
23.0
23.5
24.0
24.5
25.0
150 250 350 450 550 650 750
Frequency (MHz)
P1dB (dBm)
-35
-30
-25
-20
-15
-10
-5
0
150 250 350 450 550 650 750
Frequency (MHz)
IRL (dB)
-30
-25
-20
-15
-10
-5
0
150 250 350 450 550 650 750
Frequency (MHz)
ORL (dB)
-38
-36
-34
-32
-30
-28
-26
150 250 350 450 550 650 750
Frequency (MHz)
Isolation (dB)
85°C
25°C
-40°C
85°C
25°C
-40°C
85°C
25°C
-40°C
85°C
25°C
-40°C
85°C
25°C
-40°C
5
Figure 13. Noise Figure vs Frequency and Temperature Figure 14. OIP3 vs Output Power and Temperature at 450MHz
Figure 15. Current vs Voltage and Temperature
MGA-31189 Application Circuit Data for 450MHz (continue)
1
2
3
4
5
6
7
8
9
10
150 250 350 450 550 650 750
Frequency (MHz)
NF (dB)
26
28
30
32
34
36
38
40
42
44
46
0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
Pout (dBm)
OIP3 (dBm)
85°C
25°C
-40°C
85°C
25°C
-40°C
0
20
40
60
80
100
120
140
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
Vdd (V)
Idd (mA)
85°C
25°C
-40°C
6
MGA-31189 Application Circuit Data for 900MHz
TA = 25°C, Vd = 5.0V, Id = 111mA
Figure 16. OIP3 vs Frequency and Temperature Figure 17. P1dB vs Frequency and Temperature
Figure 18. Gain vs Frequency and Temperature Figure 19. IRL vs Frequency and Temperature
Figure 20. ORL vs Frequency and Temperature Figure 21. Isolation vs Frequency and Temperature
36
38
40
42
44
46
48
50
52
54
600 700 800 900 1000 1100 1200
Frequency (MHz)
OIP3 (dBm)
19.0
19.5
20.0
20.5
21.0
21.5
22.0
600 700 800 900 1000 1100 1200
Frequency (MHz)
Gain (dB)
-35
-30
-25
-20
-15
-10
-5
600 700 800 900 1000 1100 1200
Frequency (MHz)
ORL (dB)
-30.0
-29.5
-29.0
-28.5
-28.0
-27.5
-27.0
-26.5
-26.0
600 700 800 900 1000 1100 1200
Frequency (MHz)
Isolation (dB)
-22
-20
-18
-16
-14
-12
-10
600 700 800 900 1000 1100 1200
Frequency (MHz)
IRL (dB)
22.0
22.5
23.0
23.5
24.0
24.5
25.0
600 700 800 900 1000 1100 1200
Frequency (MHz)
P1dB (dBm)
85°C
25°C
-40°C
85°C
25°C
-40°C
85°C
25°C
-40°C
85°C
25°C
-40°C
85°C
25°C
-40°C
85°C
25°C
-40°C
7
Figure 22. Noise Figure vs Frequency and Temperature Figure 23. OIP3 vs Output Power and Temperature at 900MHz
Figure 24. Current vs Voltage and Temperature
MGA-31189 Application Circuit Data for 900MHz (continue)
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
600 700 800 900 1000 1100 1200
Frequency (MHz)
NF (dB)
28
30
32
34
36
38
40
42
44
46
48
0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
Pout (dBm)
OIP3 (dBm)
85°C
25°C
-40°C
85°C
25°C
-40°C
0
20
40
60
80
100
120
140
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
Vdd (V)
Idd (mA)
85°C
25°C
-40°C
8
MGA-31189 Application Circuit Data for 1500MHz
TA = 25°C, Vd = 5.0V, Id = 111mA
Figure 25. OIP3 vs Frequency and Temperature Figure 26. P1dB vs Frequency and Temperature
Figure 27. Gain vs Frequency and Temperature Figure 28. IRL vs Frequency and Temperature
Figure 29. ORL vs Frequency and Temperature Figure 30. Isolation vs Frequency and Temperature
32
34
36
38
40
42
44
46
1200 1300 1400 1500 1600 1700 1800
Frequency (MHz)
OIP3 (dBm)
22.0
22.5
23.0
23.5
24.0
24.5
25.0
1200 1300 1400 1500 1600 1700 1800
Frequency (MHz)
P1dB (dBm)
18.0
18.5
19.0
19.5
20.0
20.5
21.0
1200 1300 1400 1500 1600 1700 1800
Frequency (MHz)
Gain (dB)
-22
-20
-18
-16
-14
-12
-10
1200 1300 1400 1500 1600 1700 1800
Frequency (MHz)
IRL (dB)
-30
-25
-20
-15
-10
-5
1200 1300 1400 1500 1600 1700 1800
Frequency (MHz)
ORL (dB)
-30.0
-29.5
-29.0
-28.5
-28.0
-27.5
-27.0
-26.5
-26.0
1200 1300 1400 1500 1600 1700 1800
Frequency (MHz)
Isolation (dB)
85°C
25°C
-40°C
85°C
25°C
-40°C
85°C
25°C
-40°C
85°C
25°C
-40°C
85°C
25°C
-40°C
85°C
25°C
-40°C
9
Figure 31. Noise Figure vs Frequency and Temperature Figure 32. OIP3 vs Output Power and Temperature at 1500MHz
Figure 33. Current vs Voltage and Temperature
MGA-31189 Application Circuit Data for 1500MHz (continue)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
1200 1300 1400 1500 1600 1700 1800
Frequency (MHz)
NF (dB)
30
32
34
36
38
40
42
44
-2.0 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
Pout (dBm)
OIP3 (dBm)
85°C
25°C
-40°C
85°C
25°C
-40°C
0
20
40
60
80
100
120
140
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
Vdd (V)
Idd (mA)
85°C
25°C
-40°C
10
Application Circuit Description and Layout
Figure 34. Circuit diagram Figure 35. Demoboard
Bill of Materials
Circuit
Symbol Size
Description
For 0.45GHz(1) For 0.9GHz(2) For 1.5GHz(3)
Value Manufacturer Value Manufacturer Value Manufacturer
C2 0402 0.1FMurata 0.1FMurata 0.1FMurata
C3 0603 2.2FMurata 2.2FMurata 2.2FMurata
C7 0402 18pF Murata 100pF Murata 100pF Murata
C8 0402 82pF Murata 39pF Murata 100pF Murata
C9 0402 5.6pF Murata NA NA NA NA
L1 0402 56nH Coilcraft 39nH Murata 12nH Murata
L3 0402 18nH Coilcraft NA NA NA NA
Note: NA – not required in actual PCB design
Input Matching Circuit
1. Γ_mag = 0.303, Γ_ang = -163.74°
2. Γ_mag = 0.071, Γ_ang = -113.02°
3. Γ_mag = 0.106, Γ_ang = -128.48°
Output Matching Circuit
1. Γ_mag = 0.063, Γ_ang = 96.75°
2. Γ_mag = 0.039, Γ_ang = -134.54°
3. Γ_mag = 0.062, Γ_ang = 128.17°
11X
RFin RFout
DCin
Figure 36. Input and output tuned Gamma location for 450MHz(1) , 900MHz(2) and 1.5GHz(3)
MGA-31189 is an input and output prematched component. To bias MGA-31189, a +5V supply (Vdd) is connected to the
output pin thru a RF choke, L1 (which isolates the inband signal from the DC supply). The bypass capacitors, C3 and C2
help to eliminate out of low band frequency signals from the power supply. Blocking capacitors are required for its input
(C7) and output (C8), to isolate the supply voltage from succeeding circuits. To improve on input match at 450MHz, L3
and C9 are added. The L1, together with C8 also act as the output tuning circuitry. The recommended output tuning is
for achieving best OIP3, while meeting typical speci cations for other parameters.
L1 RFout
C8C7
RFin
Vdd
C3
C2
11X
L3
C9
C11
C10
AVAGO
TECHNOLOGIES
IN
Jul 2009
REV 3.2
SOT-89
GND
L3 C9
C7
VCTRL
2.2UF/15V
0805
GND
GND
OUT
C1
L1
2.2UF/15V
0805
GND
VDD
VSENSE
L2
CTxx
L4
C4
C6
C5
C8
GND
2.2UF/15V
0805
VSENSE
VDD
C12
C3
C2
11
MGA-31189 Typical Scatter Parameters(1)
TA = 25°C, Vd = 5.0V, Id = 111mA, Zo = 50
Freq
GHz
S11 S11 S11 S21 S21 S21 S12 S12 S12 S22 S22 S22
KMag. Ang. dB Mag. Ang. dB Mag. Ang. dB Mag. Ang. dB
0.05 0.229 -146.8 -12.8 12.340 163.1 21.8 0.040 5.0 -28.0 0.499 -172.1 -6.0 1.041
0.10 0.217 -161.0 -13.3 11.850 163.6 21.5 0.040 0.0 -27.9 0.494 178.8 -6.1 1.081
0.20 0.217 -172.7 -13.3 11.590 158.1 21.3 0.041 -6.2 -27.8 0.483 167.7 -6.3 1.104
0.30 0.221 -179.8 -13.1 11.480 150.5 21.2 0.041 -11.5 -27.7 0.465 159.1 -6.7 1.122
0.40 0.225 173.9 -13.0 11.390 142.3 21.1 0.041 -16.7 -27.7 0.438 151.7 -7.2 1.142
0.50 0.226 167.0 -12.9 11.300 133.9 21.1 0.042 -21.9 -27.6 0.406 145.2 -7.8 1.163
0.60 0.223 158.5 -13.1 11.210 125.2 21.0 0.042 -27.3 -27.5 0.370 139.3 -8.6 1.185
0.70 0.218 148.4 -13.2 11.100 116.4 20.9 0.042 -32.8 -27.5 0.335 134.8 -9.5 1.205
0.80 0.214 136.1 -13.4 10.980 107.5 20.8 0.042 -38.6 -27.5 0.303 132.1 -10.4 1.224
0.90 0.213 121.8 -13.4 10.840 98.4 20.7 0.042 -44.7 -27.4 0.279 131.1 -11.1 1.242
1.00 0.218 106.2 -13.2 10.670 89.2 20.6 0.042 -51.1 -27.5 0.263 130.9 -11.6 1.259
1.10 0.224 91.9 -13.0 10.480 80.4 20.4 0.042 -57.5 -27.5 0.251 128.3 -12.0 1.277
1.20 0.231 79.0 -12.7 10.310 71.3 20.3 0.042 -63.8 -27.5 0.240 125.9 -12.4 1.294
1.30 0.241 65.7 -12.4 10.120 62.1 20.1 0.042 -70.1 -27.5 0.230 123.6 -12.8 1.314
1.40 0.251 52.2 -12.0 9.912 52.7 19.9 0.042 -76.7 -27.6 0.221 121.5 -13.1 1.338
1.50 0.262 38.3 -11.6 9.675 43.3 19.7 0.041 -83.4 -27.7 0.212 119.3 -13.5 1.367
1.60 0.275 24.2 -11.2 9.412 33.9 19.5 0.041 -90.2 -27.8 0.205 117.1 -13.8 1.402
1.70 0.290 9.9 -10.8 9.125 24.5 19.2 0.040 -97.2 -28.0 0.198 114.6 -14.1 1.445
1.80 0.306 -4.6 -10.3 8.815 15.0 18.9 0.039 -104.3 -28.2 0.193 112.0 -14.3 1.496
1.90 0.324 -19.0 -9.8 8.486 5.6 18.6 0.038 -111.5 -28.4 0.187 109.1 -14.5 1.557
2.00 0.344 -33.4 -9.3 8.139 -3.7 18.2 0.037 -118.7 -28.6 0.183 105.9 -14.7 1.628
2.10 0.367 -47.6 -8.7 7.776 -13.0 17.8 0.036 -126.1 -28.9 0.180 102.3 -14.9 1.710
2.20 0.392 -61.4 -8.1 7.403 -22.2 17.4 0.034 -133.4 -29.3 0.178 98.2 -15.0 1.803
2.30 0.421 -74.9 -7.5 7.023 -31.3 16.9 0.033 -140.8 -29.6 0.177 93.4 -15.1 1.906
2.40 0.453 -87.9 -6.9 6.641 -40.3 16.5 0.032 -148.1 -30.0 0.177 88.0 -15.1 2.017
2.50 0.488 -100.3 -6.2 6.260 -49.2 15.9 0.030 -155.4 -30.4 0.178 81.8 -15.0 2.133
3.00 0.687 -150.3 -3.3 4.472 -91.1 13.0 0.023 169.3 -32.7 0.199 39.7 -14.0 2.647
3.50 0.822 174.9 -1.7 3.082 -128.3 9.8 0.018 138.1 -35.1 0.227 -11.2 -12.9 3.025
4.00 0.882 147.5 -1.1 2.138 -161.5 6.6 0.014 111.6 -36.8 0.278 -60.5 -11.1 3.496
5.00 0.910 101.5 -0.8 1.070 137.8 0.6 0.013 66.7 -37.6 0.467 -136.9 -6.6 4.963
6.00 0.918 58.3 -0.7 0.524 80.9 -5.6 0.014 24.3 -36.8 0.580 164.0 -4.7 7.125
7.00 0.931 21.3 -0.6 0.258 31.9 -11.8 0.014 -13.9 -36.8 0.576 114.2 -4.8 12.313
8.00 0.935 -8.9 -0.6 0.141 -10.4 -17.0 0.013 -44.6 -37.6 0.569 74.3 -4.9 23.268
9.00 0.933 -39.5 -0.6 0.085 -52.0 -21.4 0.011 -71.9 -39.2 0.594 39.7 -4.5 45.258
10.00 0.936 -69.1 -0.6 0.051 -93.7 -25.8 0.008 -96.5 -42.2 0.650 4.1 -3.7 89.931
11.00 0.946 -92.3 -0.5 0.029 -133.1 -30.9 0.004 -103.3 -48.2 0.728 -31.5 -2.8 223.521
12.00 0.954 -108.5 -0.4 0.014 -171.3 -37.1 0.003 -67.6 -51.5 0.799 -61.5 -1.9 434.262
13.00 0.957 -121.0 -0.4 0.007 132.0 -43.7 0.004 -35.1 -48.0 0.844 -86.3 -1.5 466.907
14.00 0.951 -134.7 -0.4 0.005 50.6 -45.3 0.007 -45.1 -43.6 0.866 -110.5 -1.2 332.034
15.00 0.943 -151.9 -0.5 0.008 -23.8 -42.4 0.008 -69.8 -42.4 0.867 -133.5 -1.2 242.204
16.00 0.939 -170.3 -0.5 0.007 -70.9 -43.6 0.005 -92.2 -45.4 0.857 -150.2 -1.3 439.706
17.00 0.943 173.0 -0.5 0.004 -72.5 -47.5 0.003 -78.5 -49.2 0.851 -161.6 -1.4 1046.765
18.00 0.948 159.6 -0.5 0.004 -44.6 -47.7 0.004 -44.6 -48.6 0.835 -174.5 -1.6 994.693
19.00 0.946 149.4 -0.5 0.006 -29.9 -44.5 0.006 -29.4 -45.1 0.813 167.6 -1.8 534.995
20.00 0.931 139.6 -0.6 0.008 -21.8 -41.5 0.008 -18.3 -41.9 0.803 147.2 -1.9 352.978
12
MGA-31189 K-Factor (1)
TA = 25°C, Vd = 5.0V, Id = 111mA, Zo = 50
24681012141618020
1
2
3
4
5
6
7
8
9
0
10
freq, GHz
K
MGA-31189 Typical Noise Parameters (1)
TA = 25°C, Vd = 5.0V, Id = 111mA, Zo = 50
Freq
(GHz)
Fmin
(dB)
opt
Mag
opt
Ang Rn/Z0
Ga
(dB)
0.5 2.02 0.112 1.9 0.28 21.89
0.8 1.69 0.132 30.3 0.24 21.28
0.9 1.75 0.153 0.7 0.26 21.04
1 1.79 0.143 5.4 0.26 20.93
1.5 1.77 0.115 83.6 0.21 20.17
2 1.89 0.207 117.5 0.20 19.17
2.5 2.43 0.458 132.2 0.22 18.16
3 2.66 0.670 176.8 0.06 16.20
3.5 3.38 0.772 -166.5 0.10 15.54
4 4.91 0.845 -143.6 0.80 13.85
4.5 7.01 0.889 -123.3 5.86 12.29
5 8.49 0.895 -103.5 10.58 9.57
5.5 9.71 0.892 -79.1 25.29 7.15
6 11.64 0.903 -57.0 56.34 4.63
Note:
1. Measurements are made on 10mils Rogers RO4350 TRL Board.
13
Part Number Ordering Information
Part Number No. of Devices Container
MGA-31189-BLKG 100 Antistatic Bag
MGA-31189-TR1G 3000 13” Tape/Reel
SOT89 Package Dimensions
DIMENSIONS IN MILLIMETERS DIMENSIONS IN INCHES
SYMBOLS MIN NOM MAX MIN NOM MAX
A 1.40 1.50 1.60 0.055 0.059 0.063
L 0.89 1.04 1.20 0.0350 0.041 0.047
b 0.36 0.42 0.48 0.014 0.016 0.018
b1 0.41 0.47 0.53 0.016 0.018 0.030
C 0.38 0.40 0.43 0.014 0.015 0.017
D 4.40 4.50 4.60 0.173 0.177 0.181
D1 1.40 1.60 1.75 0.055 0.062 0.069
E 3.94 - 4.25 0.155 - 0.167
E1 2.40 2.50 2.60 0.094 0.098 0.102
e1 2.90 3.00 3.10 0.114 0.118 0.122
H 0.35 0.40 0.45 0.014 0.016 0.018
S 0.65 0.75 0.85 0.026 0.030 0.034
e 1.40 1.50 1.60 0.054 0.059 0.063
MATTE FINISH
POLISH
POLISH
D
D1
H
E1
E
L
b
e
e1S
C
b1 b
A
OR
14
Device Orientation
Tape Dimensions
DIMENSIONS IN MM
NOTES:
1. 10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE ±0.2
2. CAMBER IN COMPLIANCE WITH EIA 481
3. POCKET POSITION RELATIVE TO SPROCKET HOLE MEASURED
AS TRUE POSITION OF POCKET, NOT POCKET HOLE
12.0 ± .3
Ao = 4.60
Bo = 4.90
Ko = 1.90
5.50 ± .05
SEE NOTE 3
1.75 ± .10
8.00
Ø 1.5 +0.1/-0.0
2.00 ± .05 SEE NOTE 3
4.00 SEE NOTE 1
SECTION A - A
Ø 1.50 MIN.
Ao
KoR 0.3 TYP.
R 0.3 MAX.
0.30 ± .05
A
A
Bo
USER FEED
DIRECTION COVER TAPE
CARRIER
TAPE
REEL
11X
11X
11X
11X
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved.
AV02-2532N - August 1, 2012
Reel Dimensions – 13” Reel
Ø 20.2
MIN
2.0 ± 0.5
Ø 13.0 +0.5
-0.2
102.0
REF
330.0
REF
8.4
(MEASURED AT HUB)
(MEASURED AT HUB)
"A"
ATTENTION
Electrostatic Sensitive Devices
Safe Handling Required
MINNEAPOLIS USA
U.S PAT 4726534
R
LOKREEL R
11.1 MAX.
Detail "A"
Detail "B"
PS
6
6
PS
1.5
88 REF
96.5
+0.3
- 0.2
Dimensions in mm