PTFB211803EL PTFB211803FL Confidential, Limited Internal Distribution Thermally-Enhanced High Power RF LDMOS FETs 180 W, 2110 - 2170 MHz Description The PTFB211803EL and PTFB211803FL are 180-watt LDMOS FETs intended for use in multi-standard cellular power amplifier applications in the 2110 to 2170 MHz frequency band. Features include input and output matching, high gain and thermally-enhanced packages with slotted or earless flanges. Manufactured with Infineon's advanced LDMOS process, these devices provide excellent thermal performance and superior reliability. * Broadband internal matching * Typical two-carrier WCDMA performance at 2170 MHz, 30 V - Average output power = 40 W - Linear Gain = 17.5 dB - Efficiency = 29.7% - Intermodulation distortion = -34 dBc - Adjacent channel power = -37 dBc * Typical CW performance, 2170 MHz, 30 V - Output power at P1dB = 180 W - Efficiency = 55% * Increased negative gate-source voltage range for improved performance in Doherty amplifiers 5 * Integrated ESD protection. 0 * Capable of handling 10:1 VSWR @ 30 V, 180 W (CW) output power * Pb-free and RoHS compliant -20 40 -25 35 30 -35 25 -40 20 IMD Up ACPR -45 -50 15 10 IMD Low -55 -60 31 33 35 37 39 41 43 45 Efficiency (%) IMD (dBc) / ACPR (dBc) VDD = 30 V, IDQ = 1.30 A, = 2170 MHz, 3GPP WCDMA, PAR = 8 dB, 10 MHz carrier spacing, BW 3.84 MHz Efficiency PTFB211803FL H-34288-4/2 Features Two-carrier WCDMA 3GPP Drive-up -30 PTFB211803EL H-33288-6 47 49 Output Power (dBm) RF Characteristics Two-carrier WCDMA Measurements (not subject to production test-verified by design/characterization in Infineon test fixture) VDD = 30 V, IDQ = 1.3 A, POUT = 40 W average, 1 = 2135 MHz, 2 = 2145 MHz, 3GPP signal, channel bandwidth = 3.84 MHz, peak/average = 8 dB @ 0.01% CCDF Characteristic Symbol Min Typ Max Unit Gain Gps -- 17.5 -- dB Drain Efficiency hD -- 29.5 -- % Adjacent Channel Power Ratio ACPR -- -38 -- dBc All published data at TCASE = 25C unless otherwise indicated ESD: Electrostatic discharge sensitive device--observe handling precautions! Data Sheet 1 of 14 Rev. 05, 2010-11-10 PTFB211803EL PTFB211803FL Confidential, Limited Internal Distribution RF Characteristics (cont.) Two-carrier WCDMA Measurements (tested in Infineon test fixture) VDD = 30 V, IDQ = 1.3 A, POUT = 38 W average, 1 = 2165 MHz, 2 = 2170 MHz, 3GPP signal, channel bandwidth = 3.84 MHz, peak/average = 7.5 dB @ 0.01% CCDF Characteristic Symbol Min Typ Max Unit Gain Gps 16 17 -- dB Drain Efficiency hD 28 29.5 -- % Intermodulation Distortion IMD -- -32.5 -31.5 dBc DC Characteristics Characteristic Conditions Symbol Min Typ Max Unit Drain-Source Breakdown Voltage VGS = 0 V, IDS = 10 mA V(BR)DSS 65 -- -- V Drain Leakage Current VDS = 28 V, VGS = 0 V IDSS -- -- 1.0 A Drain Leakage Current VDS = 63 V, VGS = 0 V IDSS -- -- 10.0 A On-State Resistance VGS = 10 V, VDS = 0.1 V RDS(on) -- 0.05 -- W Operating Gate Voltage VDS = 30 V, IDQ = 1.3 A VGS 2.3 3.0 3.3 V Gate Leakage Current VGS = 10 V, VDS = 0 V IGSS -- -- 1.0 A Maximum Ratings Parameter Symbol Value Unit Drain-Source Voltage VDSS 65 V Gate-Source Voltage VGS -6 to +10 V Junction Temperature TJ 200 C Storage Temperature Range TSTG -40 to +150 C Thermal Resistance (TCASE = 70C, 180 W CW) RqJC 0.3 C/W Ordering Information Type and Version Package Type Package Description Shipping PTFB211803EL V1 H-33288-6 Slotted flange, single-ended Tray PTFB211803EL V1 R250 H-33288-6 Slotted flange, single-ended Tape & Reel, 250 pcs PTFB211803FL V2 H-34288-4/2 Earless flange, single-ended Tray PTFB211803FL V2 R250 H-34288-4/2 Earless flange, single-ended Tape & Reel, 250 pcs Data Sheet 2 of 14 Rev. 05, 2010-11-10 PTFB211803EL PTFB211803FL Confidential, Limited Internal Distribution Typical Performance (data taken in a production test fixture) Two-carrier WCDMA 3GPP Single-carrier WCDMA Drive-Up VDD = 30 V, IDQ = 1.30 A, = 2170 MHz, 3GPP WCDMA, PAR = 8 dB, 10 MHz carrier spacing, BW 3.84 MHz 40 -20 40 30 Gain 17 20 16 10 Efficiency 15 ACP (dBc) Gain (dB) 18 Drain Efficiency (%) -25 35 37 39 41 43 45 47 -30 30 -35 25 -40 20 ACP Low -45 15 -50 10 ACP Up -55 0 33 35 Efficiency 5 -60 49 Drain Efficiency (%) 19 VDD = 30 V, IDQ = 1.30 A, = 2170 MHz 3GPP WCDMA, PAR = 7.5 dB, BW 3.84 MHz 0 33 35 Output Power (dBm) 37 39 41 43 45 47 49 Output Power (dBm) Single-carrier WCDMA, 3GPP Broadband CW Performance Gain vs. Output Power VDD = 30 V, IDQ = 1.30 A, PO UT = 47 dBm VDD = 30 V, = 2170 MHz -10 30 -20 -30 Efficiency ACP 20 -40 Gain 10 Power Gain (dB) IRL 40 2100 2120 2140 2160 2180 IDQ = 1.30 A 16 41 2200 Frequency (MHz) Data Sheet - DRAFT ONLY 17 IDQ = 0.90 A 15 -50 2080 IDQ = 1.80 A 18 IRL (dB) / ACP Up (dBc) Gain (dB) / Efficiency (%) 50 43 45 47 49 51 53 Output Power (dBm) 3 of 14 Rev. 05, 2010-11-10 PTFB211803EL PTFB211803FL Confidential, Limited Internal Distribution Typical Performance (cont.) Two-tone Drive-up Two-tone Drive-up VDD = 30 V, IDQ = 1.30 A, 1 = 2170 MHz, 2 = 2169 MHz VDD = 30 V, IDQ = 1.30 A, 1 = 2170 MHz, 2 = 2169 MHz -15 19 40 -25 30 -35 Gain (dB) Gain 20 17 16 10 Efficiency 15 Efficiency (%) 18 42 44 46 48 50 52 Efficiency -45 20 -55 10 0 40 54 42 -20 Efficiency 35 -30 IMD3 25 -40 Gain 15 2110MHz -40 -50 2200 41 Frequency (MHz) Data Sheet 54 2140MHz -30 -50 2180 52 2170MHz IMD (dBc) 45 2160 50 -20 Return Loss (dB) / IMD (dBc) Gain (dB) / Efficiency (%) -10 2140 48 VDD = 30 V, IDQ = 1.30 A, tone spacing = 1 MHz 55 2120 46 Two-tone Drive-up at Selected Frequencies VDD = 30 V, IDQ = 1.30 A, PO UT = 63 W 2100 44 Output Power, PEP (dBm) Two-tone Broadband Performance 2080 30 IMD3 Output Power, PEP (dBm) IRL 40 -65 0 40 50 Efficiency (%) 50 IMD (dBc) 20 43 45 47 49 51 53 Output Power, PEP (dBm) 4 of 14 Rev. 05, 2010-11-10 PTFB211803EL PTFB211803FL Confidential, Limited Internal Distribution Typical Performance (cont.) Power Sweep, CW Gain & Efficiency vs. Output Power Power Sweep, CW Gain & Efficiency vs. Output Power VDD = 30 V, IDQ = 1.30 A, = 2170 MHz 18 50 17 40 Gain 16 15 30 Efficiency +25C +85C -10 C 20 14 19 18 44 46 48 50 45 Gain 17 35 Efficiency 16 10 42 55 25 15 52 15 41 Output Power (dBm) Drain Efficiency (%) 60 Gain (dB) 19 Drain Efficiency (%) Gain (dB) VDD = 30 V, IDQ = 1.30 A, = 2170 MHz 43 45 47 49 51 53 Output Power (dBm) Intermodulation Distortion vs. Output Power VDD = 30 V, IDQ = 1.30 A, 1 = 2170 MHz, 2 = 2169 MHz -20 3rd Order IMD (dBc) -30 5th -40 7th -50 -60 -70 40 45 50 55 Output Power, PEP (dBm) Data Sheet - DRAFT ONLY 5 of 14 Rev. 05, 2010-11-10 5 4 0. 0 0. 45 0. nalized to 50 Ohms 2080 MHz 0. MHz 3 PTFB211803EL PTFB211803FL R --> RD G E NE RA T O S Z Load W 0.4 0.3 0.2 Z Load 0.1 2080 MHz 2200 MHz MHz R jX R jX 2200 2.02 -6.03 1.70 -4.67 2170 2.12 -6.26 1.72 -4.76 2140 2.23 -6.50 1.73 -4.85 2110 2.34 -6.75 1.75 -4.95 2080 2.47 -7.01 1.77 -5.05 E W AV <--- Z Source W Frequency 0.0 G W ARD LOA D T HS T O L ENG - W AV E LE NGT H S T OW A Z Load Z0 = 50 0.1 D Z Source 0. 2 Broadband Circuit Impedance 0.1 Confidential, Limited Internal Distribution Z Source 0. 2 0. 3 0. 4 0. 6 0. 5 0. 45 0 0. 5 See next page for reference circuit information Data Sheet 6 of 14 Rev. 05, 2010-11-10 PTFB211803EL PTFB211803FL Confidential, Limited Internal Distribution Reference Circuit C802 1000 pF S2 8 C801 1000 pF C803 1000 pF 4 R805 1200 Ohm In Out NC NC 2 3 6 1 7 5 R803 10 Ohm 2 C 1 B 4 S R802 10 Ohm S1 3 E S4 R801 1300 Ohm 3 TL111 R804 100 Ohm TL108 R102 10 Ohm TL133 2 TL114 TL125 1 TL117 TL134 2 3 1 TL105 TL107 TL126 TL102 3 C102 100000 pF C101 10 pF 2 TL106 3 1 TL115 TL121 RF_IN TL112 TL123 C103 4710000 pF 2 3 1 C106 10 pF TL132 TL137 TL136 1 TL129 TL131 TL120 TL101 TL113 2 GATE DUT (Pin G) 3 1 2 3 4 TL110 TL128 TL130 C104 4710000 pF 2 C108 2.1 pF 3 1 C105 100000 pF TL116 C107 10 pF 2 3 1 e r=3.48 TL109 H=20 mil RO/RO4350B1 R101 10 Ohm TL135 TL119 TL122 TL104 TL103 TL118 TL124 3 2 1 b 2 1 1 8 0 3 e f l _ b d i n _ 0 8 - 2 6 - 2 0 1 0 Reference circuit input schematic for = 2170 MHz C210 10000000 pF TL212 TL210 TL230 TL229 TL234 TL232 2 1 TL231 2 3 DRAIN DUT (Pin D) TL238 TL205 TL223 TL226 TL214 3 1 2 1 TL222 2 3 VDD C205 100000000 pF C208 2200000 pF TL202 TL215 TL213 1 3 C207 1000000 pF DUT (Pin V) TL237 TL233 TL208 TL227 1 TL204 TL235 C201 10 pF TL206 TL207 TL201 TL203 RF_OUT 2 3 C203 0.3 pF e r=3.48 H=20 mil RO/RO4350B1 C209 1000000 pF DUT (Pin V) TL209 TL236 TL220 TL224 2 C204 100000000 pF C206 2200000 pF TL219 3 1 TL225 2 TL228 3 1 TL221 2 1 TL216 TL218 b 2 1 1 8 0 3 e f l _ b d o u t _ 0 8 - 2 6 - 2 0 1 0 2 TL217 3 1 3 TL211 C202 10000000 pF VDD Reference circuit output schematic for = 2170 MHz Data Sheet 7 of 14 Rev. 05, 2010-11-10 PTFB211803EL PTFB211803FL Confidential, Limited Internal Distribution Reference Circuit (cont.) Description DUT PTFB211803EL or PTFB211803FL PCB 0.508 mm [.020"] thick, er = 3.66, Rogers 4350, 1 oz. copper Electrical Characteristics at 2170 MHz Transmission Electrical Line Characteristics Dimensions: mm Dimensions: mils Input TL101 0.053 , 6.67 W = 13.970, L = 4.064 W = 550, L = 160 TL102, TL103 0.019 , 54.17 W = 1.016, L = 1.575 W = 40, L = 62 TL104, TL105 0.000 , 36.77 W = 1.829, L = 0.025 W = 72, L = 1 TL106, TL122 0.026 , 54.17 W = 1.016, L = 2.159 W = 40, L = 85 TL107 0.021 , 54.17 W = 1.016, L = 1.727 W = 40, L = 68 TL108 0.018 , 54.17 W = 1.016, L = 1.524 W = 40, L = 60 TL109 0.029 , 54.17 W = 1.016, L = 2.451 W = 40, L = 97 TL110 0.092 , 63.89 W = 0.762, L = 7.831 W = 30, L = 308 TL111 0.031 , 34.72 W = 1.981, L = 2.540 W = 78, L = 100 TL112 W1 = 1.270, W2 = 2.286 W1 = 50, W2 = 90 TL113 W1 = 17.780, W2 = 12.700 W1 = 700, W2 = 500 0.012 , 54.17 W1 = 1.016, W2 = 1.270, W3 = 1.016 W1 = 40, W2 = 50, W3 = 40 TL115, TL116, TL126, 0.019 , 63.89 TL128 W1 = 0.762, W2 = 0.762, W3 = 1.600 W1 = 30, W2 = 30, W3 = 63 TL117, TL118, TL119 W = 1.016 W = 40 TL120 W1 = 13.970, W2 = 1.016, W3 = 13.970 W4 = 1.016 W1 = 550, W2 = 40, W3 = 550 W4 = 40 TL114 TL121 0.032 , 47.12 W = 1.270, L = 2.692 W = 50, L = 106 TL123 0.016 , 31.24 W = 2.286, L = 1.270 W = 90, L = 50 TL124, TL134 0.095 , 54.17 W = 1.016, L = 8.001 W = 40, L = 315 TL125, TL127 0.022 , 54.17 W1 = 1.016, W2 = 1.016, W3 = 1.829 W1 = 40, W2 = 40, W3 = 72 TL129 0.005 , 6.67 W = 13.970, L = 0.356 W = 550, L = 14 TL130 0.000 , 144.35 W = 0.025, L = 0.025 W = 1, L = 1 TL131 (taper) 0.008 , 6.67 / 7.64 W1 = 13.970, W2 = 12.065, L = 0.584 W1 = 550, W2 = 475, L = 23 TL132 0.134 , 47.12 W = 1.270, L = 11.151 W = 50, L = 439 TL133 0.012 , 54.17 W = 1.016, L = 1.016 W = 40, L = 40 TL135 0.012 , 54.17 W = 1.016, L = 1.021 W = 40, L = 40 TL136 0.000 , 7.64 W1 = 12.065, W2 = 12.065, W3 = 0.025 W1 = 475, W2 = 475, W3 = 1 TL137 (taper) 0.032 , 7.64 / 47.12 W1 = 12.065, W2 = 1.270, L = 2.464 W1 = 475, W2 = 50, L = 97 table continued on page 9 Data Sheet 8 of 14 Rev. 05, 2010-11-10 PTFB211803EL PTFB211803FL Confidential, Limited Internal Distribution Reference Circuit (cont.) Electrical Characteristics at 2170 MHz Transmission Electrical Line Characteristics Dimensions: mm Dimensions: mils Output TL201 W1 = 1.270, W2 = 2.540 W1 = 50, W2 = 100 TL202 0.001 , 5.33 W = 17.780, L = 0.076 W = 700, L = 3 TL203 0.047 , 47.12 W = 1.270, L = 3.912 W = 50, L = 154 TL204 0.044 , 39.51 W = 1.651, L = 3.581 W = 65, L = 141 TL205 0.054 , 4.84 W = 19.685, L = 4.064 W = 775, L = 160 TL206, TL207 0.016 , 28.85 W = 2.540, L = 1.270 W = 100, L = 50 TL208 0.012 , 39.51 W = 1.651, L = 1.016 W = 65, L = 40 TL209 0.032 , 16.90 W = 4.928, L = 2.540 W = 194, L = 100 TL210 0.032 , 17.05 W = 4.877, L = 2.540 W = 192, L = 100 TL211, TL212 W = 3.048 W = 120 TL213, TL218 0.038 , 25.04 W1 = 3.048, W2 = 3.048, W3 = 3.048 W1 = 120, W2 = 120, W3 = 120 TL214, TL216 0.135 , 25.04 W = 3.048, L = 10.820 W = 120, L = 426 TL215, TL217 0.046 , 25.04 W = 3.048, L = 3.683 W = 120, L = 145 TL219, TL228, TL233, 0.003 , 25.04 TL234 W = 3.048, L = 0.254 W = 120, L = 10 TL220, TL229 0.016 , 25.04 W = 3.048, L = 1.270 W = 120, L = 50 TL221, TL237 0.031 , 25.04 W1 = 3.048, W2 = 3.048, W3 = 2.489 W1 = 120, W2 = 120, W3 = 98 TL222 (taper) 0.074 , 5.33 / 39.51 W1 = 17.780, W2 = 1.651, L = 5.588 W1 = 700, W2 = 65, L = 220 TL223 0.003 , 4.84 W = 19.685, L = 0.254 W = 775, L = 10 W1 = 3.048, W2 = 3.048, W3 = 1.778 W1 = 120, W2 = 120, W3 = 70 TL224, TL225, TL231, 0.022 , 25.04 TL232 TL226 (taper) 0.010 , 4.84 / 5.33 W1 = 19.685, W2 = 17.780, L = 0.762 W1 = 775, W2 = 700, L = 30 TL227 0.022 ,39.51 W1 = 1.651, W2 = 1.651, W3 = 1.829 W1 = 65, W2 = 65, W3 = 72 TL230, TL236 W1 = 4.928, W2 = 3.048, W1 = 194, W2 = 120 TL235 W1 = 1.651, W2 = 2.540 W1 = 65, W2 = 100 TL238 W1 = 12.700, W2 = 17.780 W1 = 500, W2 = 700 Data Sheet 9 of 14 Rev. 05, 2010-11-10 PTFB211803EL PTFB211803FL Confidential, Limited Internal Distribution Reference Circuit (cont.) Circuit Assembly Information Test Fixture Part No. LTN/PTFB211803EF Find Gerber files for this test fixture on the Infineon Web site at http://www.infineon.com/rfpower RO4350, .020 RO4350, .020 (60) R804 C802 C801 R801 VDD R805 C803 (60) C210 VDD S4 R802 C208 C207 + S1 S2 R803 C205 R102 C102 RF_IN C101 C103 C106 RF_OUT C104 C203 C108 C201 C105 R101 C204 C107 C209 C206 VDD C202 PTFB211803_IN_01 PTFB211803_OUT_01 b211803efl_cd_11-08-2010 Reference circuit assembly diagram (not to scale) Data Sheet 10 of 14 Rev. 05, 2010-11-10 PTFB211803EL PTFB211803FL Confidential, Limited Internal Distribution Reference Circuit (cont.) Components Information Component Description Suggested Manufacturer P/N Input C101, C106, C107 Chip capacitor,10 pF ATC ATC100B100JW500XJ C102, C105 Chip capacitor, 0.1 F Digi-Key PCC104BCT-ND C103, C104 Chip capacitor, 4.71 F Digi-Key 493-2372-2-ND C108 Chip capacitor, 2.1 pF ATC ATC100B2R1BW500XB C801, C802, C803 Capacitor, 1000 pF Digi-Key PCC1772CT-ND R101, R102, R802, R803 Resistor, 10 Digi-Key P10ECT-ND R801 Resistor, 1300 Digi-Key P1.3KGCT-ND R804 Resistor, 100 Digi-Key P100ECT-ND R805 Resistor, 1200 Digi-Key P1.2KGCT-ND S1 Transistor Digi-Key BCP56-ND S2 Voltage Regulator Digi-Key LM78L05ACM-ND S4 Potentiometer, 2k Digi-Key 3224W-202ECT-ND Output C201 Chip capacitor, 10 pF ATC ATC100B100JW500XJ C202, C210 Capacitor, 10 F Digi-Key 587-1818-2-ND C203 Chip capacitor, 0.3 pF ATC ATC100B0R3BW500XB C204, C205 Capacitor, 100 F Digi-Key PCE4442TR-ND C206, C208 Chip capacitor, 2.2 F Digi-Key 445-1447-2-ND C207, C209 Chip capacitor, 1 F Digi-Key 445-1411-2-ND Data Sheet 11 of 14 Rev. 05, 2010-11-10 PTFB211803EL PTFB211803FL Confidential, Limited Internal Distribution Package Outline Specifications Package H-33288-6 45 X 2.032 [45 X .080] 4X 30 4X R1.524 [R.060] 2X 5.080 [.200] (2 PLS) 4X 1.143 [.045] (4 PLS) V D 4.889.510 [.192.020] V S CL 2X R1.626 [R.064] G E 9.398 [.370] 9.779 [.385] 19.558.510 [.770.020] F H -33288 - 6_ po _02 -18 - 2010 CL 2X 12.700 [.500] 2X 22.860 [.900] 27.940 [1.100] 22.352.200 [.880.008] 1.575 [.062] (SPH) 1.016 [.040] 4.039 +.254 -. 127 010 [.159 +. -. 005 ] CL 34.036 [1.340] Diagram Notes--unless otherwise specified: 1. Interpret dimensions and tolerances per ASME Y14.5M-1994. 2. Primary dimensions are mm. Alternate dimensions are inches. 3. All tolerances 0.127 [.005] unless specified otherwise. 4. Pins: A = gate, B = source, C = drain, D = VDD, E, F = N.C. 5. Lead thickness: 0.10 + 0.051/-0.025 mm [.004 +0.002/-0.001 inch]. 6. Gold plating thickness: 0.25 micron [10 microinch] max. Data Sheet 12 of 14 Rev. 05, 2010-11-10 PTFB211803EL PTFB211803FL Confidential, Limited Internal Distribution Package Outline Specifications (cont.) Package H-34288-4/2 22.860 [.900] 45 X 2.032 [45 X .080] 2X 5.080 [.200] 2X 1.143 [.045] C L 2X 30 V D V 9.779 [.385] 9.398 [.370] C L 4X R0.508+.381 -.127 R.020+.015 -.005 19.558.510 [.770.020] G ] [ 4.889.510 [.192.020] 2X 12.700 [.500] 4.039+.254 -.127 .159+.010 -.005 22.352.200 [.880.008] [ ] C 66065-A0003- C743- 01-0027 H- 34288- 4_ 2 .dwg 1.575 [.062] (SPH) C L 1.016 [.040] 23.114 [.910] S Diagram Notes--unless otherwise specified: 1. Interpret dimensions and tolerances per ASME Y14.5M-1994. 2. Primary dimensions are mm. Alternate dimensions are inches. 3. All tolerances 0.127 [.005] unless specified otherwise. 4. Pins: D = drain; S = source; G = gate; V = VDD. 5. Lead thickness: 0.10 + 0.051/-0.025 mm [.004 +0.002/-0.001 inch]. 6. Gold plating thickness: 0.25 micron [10 microinch] max. Find the latest and most complete information about products and packaging at the Infineon Internet page http://www.infineon.com/rfpower Data Sheet 13 of 14 Rev. 05, 2010-11-10 PTFB211803EL V1 / PTFB211803FL V2 Confidential, Limited Internal Distribution Revision History: 2010-11-10 Previous Version: 2010-08-25, Data Sheet Page Subjects (major changes since last revision) 1, 2, 12 Changed eared flange package type Data Sheet We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal (including a reference to this document) to: highpowerRF@infineon.com To request other information, contact us at: +1 877 465 3667 (1-877-GO-LDMOS) USA or +1 408 776 0600 International Edition 2010-11-10 Published by Infineon Technologies AG 81726 Munich, Germany (c) 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com/rfpower). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Data Sheet 14 of 14 Rev. 05, 2010-11-10