Date Code 13,45 -0,1 15,4 3 -0,1 Ident-Nr. XXXXXXX ERNI 123868 EE Zone fur durchkontaktierte 2 0,5 Locher o0.6 0.05 compliant zone for thru hole o 0.60.05 Ausrichtstreifen Alignment strip 2 21 x 2 = 2 42 4x2= 1 22 Ebene - Level 3 Ebene - Level 2 11.2 9.7 z Ebene - Level 1 a b 8.2 8 +0.2 +0.2 +0.2 4.5 0.3 c d 3.7 0.3 e f A 1 max. P2 1 max. 43,9 B C D 0,1 E P1 F G U 1 J Bezugsebene Tiefe 13 0.3 contact layout Bestuckungsplan - H Datum plane depth 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 K 1 R3 L M z K K K K K K K K K K K K K K K K K K K K K K a K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K N R2 b c P Q R d R1 e S T f 13 0.2 Lochbild fur Leiterplatte Board hole pattern (Bestuckungsseite) (Component mounting side) 5.3 0.1 14.5 0.2 6.8 16 0.2 8.3 0.1 0.1 21 x 2 = ( 42 ) 0.1 alle Locher all holes 1) 2 1) o 0,6 0,05 Durchmesser des metallisierten Loches o 0,6 o 0,05 0,7 0,02 Diameter of finished plated-through hole Bohrungsdurchmesser des Loches o 0,7 0,02 Diameter of drilled hole z a b Schichtaufbau im metallisierten Loch siehe Zeichnung 114406 c Metal plating of planted-through hole see drawing 114406 d Fehlende Masse und Angaben nach IEC 61076-4-101 f Missing information and dimensions per IEC 61076-4-101 2 22 1 Information: R3 Level 1 Tolerances siehe Bestuckungsplan / see contact layout Anforderungsstufe 2 / Consider protection memo from DIN 34 4 x 2 = (8) e class 2 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Date Designation ERmet Messerleiste B 22 ERmet Male Wide Type B 22 Elektroapparate GmbH D-73099 ADELBERG Index 2:1 Scale All Dimensions in mm V:00030758.SZN 123868 ERMB22 I