Adhesive Transfer Tape with Quick Bonding Adhesive 360 9626 * 9627 Technical Data Product Description Construction November, 2009 3MTM Adhesive Transfer Tapes with 3MTM Quick Bonding Adhesive 360 provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints. Product Number Adhesive Type/ Thickness Liner Color, Type, Print Liner Caliper 3MTM Adhesive Transfer Tape 9626 0.002" (0.05 mm) Natural, 60# Glassine 0.0032" (0.08 mm) 3MTM Adhesive Transfer Tape 9627 0.005" (0.13 mm) Natural, 60# Glassine 0.0032" (0.08 mm) Note: The caliper listed is based on a calculation from manufacturing controlled adhesive coat weights using a density of 1.071 g/cc. 3MTM Adhesive Transfer Tape with Quick Bonding Adhesive 360 9626 * 9627 Typical Physical Properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 0.05 mm (2.0 mil) 3MTM Adhesive Transfer Tape 9626 0.13 mm (5.0 mil) 3MTM Adhesive Transfer Tape 9627 Adhesion to Polypropylene ASTM D3330 - 180 degree 2 mil al foil Oz/in (N/25 mm) Faceside / Backside Oz/in (N/25 mm) Faceside / Backside - 30 seconds RT 100 (28) / 100 (28) 160 (45) / 150 (42) - 15 minutes RT 100 (28) / 100 (28) 165 (46) / 155 (43) - 72 hours RT 130 (36) / 120 (34) 165 (46) / 165 (46) Oz/in (N/25 mm) Faceside / Backside Oz/in (N/25 mm) Faceside / Backside ABS 140 (39) / 130 (36) 165 (46) / 165 (46) Stainless Steel 140 (39) / 140 (39) 160 (45) / 160 (45) Polycarbonate 140 (39) / 140 (39) 165 (46) / 165 (46) LDPE 60 (17) / 55 (15) 95 (26) / 90 (25) HDPE 70 (20) / 65 (18) 80 (22) / 80 (22) 1000 grams at 72F (22C) >10,000 minutes >10,000 minutes 500 grams at 158F (70F) >10,000 minutes >10,000 minutes Long Term (days, weeks) 200F (93C) 200F (93C) Short Term (minutes, hours) 350F (177C) 350F (177C) Very Good Very Good Product Number Adhesion to other surfaces ASTM D3330 - 180 degree, 2 mil al foil, 72 hour RT Shear Strength - ASTM D3654 Modified - (.5 inch2 sample size) Relative High Temperature Operating Ranges: Relative Solvent Resistance: Available Sizes Roll length, width, slitting tolerance, core size. Product 3MTM Adhesive Transfer Tape 9626 9627 Maximum Length in.: 1/2" to 1/2" 1/2" to 1" 1" to 6" 6" to 27" 27" to 54" 72 360 540 900 540 Normal Slitting Tolerance yds. yds. yds. yds. yds. (66 m) (329 m) (494 m) (823 m) (494 m) 72 yds. (66 m) 252 yds. (230 m) 540 yds. (494 m 720 yds. (658 m) 540 yds. (494 m) 1/32 in. (0.08 mm) Core Size (ID) 3.0 in. (76.2 mm) Minimum length 72 yds. (66 m). -2- 3MTM Adhesive Transfer Tape with Quick Bonding Adhesive 360 9626 * 9627 Features * Excellent adhesion to difficult to bond to surfaces such as HDPE, LDPE, and PP. * Super quick stick. * Higher adhesion from a thinner tape. * Excellent solvent resistance. * High temperature performance. Application Techniques Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application will assist the adhesive in developing intimate contact with the bonding surface. To accelerate the adhesion process, additional heat, up to 130F (54C), may be used. To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane.* Ideal tape application temperature range is 70F to 100F (21C to 38C). Initial tape application to surfaces at temperatures below 50F (10C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. *When using solvents, extinguish all ignition sources, including pilot lights, and follow the manufacturers precautions and directions for use. These cleaning recommendations may not be compliant with the rules of certain Air Quality Management Districts in California; consult applicable rules before use. Environmental Performance Humidity Resistance: High humidity has minimal effect on adhesive performance. No significant reduction in bond strength is observed after exposure for 7 days at 90F (32C) and 90% relative humidity. UV Resistance: When properly applied, nameplates and decorative trim parts are not adversely affected by exposure. Water Resistance: Immersion in water has no appreciable effect on the bond strength. After 100 hours at room temperature, the high bond strength is maintained. Temperature Cycling Resistance: High bond strength is maintained after cycling four times through: 8 hours at 194F (90C) 16 hours at -40F (-40C) 8 hours at 100.4F (38C/100% RH) 16 hours at -40F (-40C) Chemical Resistance: When properly applied, nameplate and decorative trim parts will hold securely after exposure to numerous chemicals including oil, mild acids, and alkalis. Application Ideas * Foam to powder coated painted surfaces. * Low surface energy plastic adhesion. -3- 3MTM Adhesive Transfer Tape with Quick Bonding Adhesive 360 9626 * 9627 Application Equipment To apply adhesives in a wide web format, lamination equipment is required to ensure acceptable quality. To learn more about working with pressure-sensitive adhesives please refer to technical bulletin, 3MTM Lamination Techniques for Converters of Laminating Adhesives (70-0704-1430-8). For additional dispenser information, contact your local 3M sales representative, or the toll free 3M sales assistance number at 1-800-362-3550. Storage Store in original cartons at 70F (21C) and 50% relative humidity. Shelf Life If stored under proper conditions, product retains its performance and properties for two years from date of manufacture. Technical Information The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use Many factors beyond 3M's control and uniquely within user's knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. Warranty, Limited Remedy, and Disclaimer Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. Limitation of Liability Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. ISO 90 01: 2000 This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2000 standards. Industrial Adhesives and Tapes Division Converter Markets 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 800-223-7427 * 651-778-4244 (fax) www.3M.com/converter Recycled Paper 40% pre-consumer 10% post-consumer -4- 3M is a trademark of 3M Company. Printed in U.S.A. (c)3M 2009 70-0713-4543-6 (11/09) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3M: 9626-3/4 9626-1 9626-1/2 9626-48 9626-54 9627-1 9627-1/2 9627-3/4 9627-48 9627-54 9627-686