2
EXTENDED COMMERCIAL TEMPERATURE RANGE
IDT74LVC1G32A
3.3V CMOS SINGLE 2-INPUT POSITIVE-OR GATE
1998 Integrated Device Technology, Inc. DSC-123456c
ABSOLUTE MAXIMUM RATINGS (1)
Symbol Description Max. Unit
TERM(2) Terminal Voltage with Respect to GND – 0.5 to + 6.5 V
VTERM(3) Terminal Voltage with Respect to GND –0.5 to +6.5 V
TSTG Storage Temperature – 65 to + 150 °C
IOUT DC Output Current – 50 to + 50 mA
IIK
IOK Continuous Clamp Current,
VI < 0 or VO < 0 – 50 mA
ICC
ISS Continuous Current through
each VCC or GND ±100 mA
LVC 1G Link
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM
RATINGS may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these or
any other c onditions above t hose indicated in the operational s ections
of this specification is not implied. Exposure to absolute maximum
rating condit i ons for extended periods may affec t reliability.
2. VCC terminals.
3. All terminals except VCC.
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Operating Condition: TA = – 40°C To +85°C
Symbol Parameter Test Conditions Min. Typ.(1) Max. Unit
VIH Input HIGH Voltage Level VCC = 1.65V to 1.95V 0.65 x VCC ——V
V
CC = 2.3V to 2.7V 1.7 — — V
VCC = 2.7V to 3.6V 2 — —
VIL Input LOW Voltage Level VCC = 1.65V to 1.95V — — 0.35 x VCC
VCC = 2.3V to 2.7V — — 0.7 V
VCC = 2.7V to 3.6V — — 0.8
IIH
IIL Input Leakage Current VCC = 3.6V VI = 0 to 5.5V — — ±5 µA
IOZH
IOZL High Impedance Output Current
(3-State Output pins) VCC = 3.6V VI = 0 to 5.5V — — ±10 µA
VIK Clamp Diode Voltage VCC = 2.3V, IIN = – 18mA — – 0.7 – 1.2 V
VHInput Hysteresis VCC = 3.3V — 100 — mV
ICCL
ICCH Quiescent Power Supply Current VCC = 3.6V VIN = GND or VCC ——10µA
I
CCZ 3.6 < Vin < 5.5V (2) ——10
∆I
CC Quiescent Power Supply
Current Variation One input at VCC − 0.6V,
other inputs at VCC or GND — — 500 µA
LVC 1G Lin
NOTE:
1. Typical v al ues are at VCC = 3.3V, +25°C am bi ent .
2. This applies to 3-st ate outputs in the di s abl ed state onl y.
CAPACITANCE (TA = +25°C, f = 1.0MH Z)
Symbol Parameter(1) Conditions Typ. Max. Unit
CIN Input Capacitance VIN = 0V 4.5 6 pF
COUT Output
Capacitance VOUT = 0V 5.5 8 pF
CI/O I/O Port
Capacitance VIN = 0V 6.5 8 pF
LVC 1G Link
NOTE:
1. As appl i cable to the devi ce type.