3.0x2.0mm SURFACE MOUNT LED LAMP Part Number: AA3021PR4S/Z PRELIMINARY SPEC WARM WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic Features z 3.0MM X 2.0MM, 1.3MM HIGH, ONLY MINIMUM glove when handling the LEDs. All devices, equipment and machinery must be electrically SPACE REQUIRED. z SUITABLE FOR COMPACT OPTOELECTRONIC grounded. APPLICATIONS. z LOW POWER CONSUMPTION. Applications z PACKAGE : 2000PCS / REEL. z traffic signaling. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. z backlighting (illuminated advertising , general lighting). z ELECTROSTATIC z TYP. DISCHARGE THRESHOLD (HBM):1000V. COLOR TEMPERATURE: 3400K z COLOR COORDINATES:X=0.41,Y=0.39 ACC. TO CIE1931. z OPTICAL z COLOR z RoHS z interior and exterior automotive lighting. z substitution of micro incandescent lamps. z reading lamps. z signal and symbol luminaire for orientation. EFFICIENCY: 31.3 lm/W(TYP.) REPRODUCTION INDEX: 70 COMPLIANT. z marker lights (e.g. steps, exit ways, etc). z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or damage the internal circuitry. 4. During surface-mounting, the pickup capillary diameter should be larger than the silicone lens to insure the capillary does not scratch or damage the lens. SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637 Selection Guide Note2 Dice Part No. AA3021PR4S/Z luminous Intensity Iv(mcd) @ 20mA Lens Type WARM WHITE (InGaN) WATER CLEAR Note3 v (mlm) @ 20mA Viewing Note1 Angle Min. Typ. Typ. 21/2 480 600 2000 125 Absolute Maximum Ratings at TA=25C Parameter Symbol Value Unit Power dissipation Pt 111 mW Reverse Voltage VR 5 V Junction temperature TJ 110 C Operating Temperature Top -40 To +85 C Storage Temperature Tstg -40 To +100 C IF 30 mA IFM 100 mA Rth JA Rth JS 250 100 C/W C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size16 mm 2 per pad), Electrical / Optical Characteristics at TA=25C Parameter Symbol Value Unit Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X 0.41 - Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y 0.39 - Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage 2.7 VF Note1 3.2 IF=20mA [Max.] Reverse Current (VR=5V) 3.7 [Typ.] 0.01 IR Reverse Current (VR=5V) V [Max.] A 10 Temperature coefficient of x IF=20mA, -10C T100C [Typ.] TC x -0.1 10-3 / C Temperature coefficient of y IF=20mA, -10C T100C [Typ.] TCy -0.2 10-3 / C Temperature coefficient of VF IF=20mA, -10C T100C [Typ.] TCV -2.5 mV/ C Note: 1. Forward voltage is measured with a current pulse of 10ms at a tolerance of 0.1V. SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 3 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637 Brightness codes Note1 luminous Intensity Iv(mcd) @ 20mA v (mlm) @ 20mA Code. Min. Max. Typ. S 480 750 1900 T 650 1100 2100 U 900 1500 2300 Note2 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. Warm White AA3021PR4S/Z SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 4 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637 AA3021PR4S/Z SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 5 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637 AA3021PR4S/Z Warm White CIE 0.50 0.48 0.46 0.44 f2 0.42 f0 d2 0.40 f1 d0 0.38 d3 0.36 d1 0.34 0.32 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52 0.54 d0 d1 x 0.3610 0.3575 0.3870 0.3942 x 0.3575 0.3545 0.3800 0.3870 y 0.3850 0.3612 0.3820 0.4068 y 0.3612 0.3408 0.3580 0.3820 Reference CCT : 4700~3900K Reference CCT : 4700~3900K d2 d3 x 0.3870 0.4254 0.4350 0.3942 x 0.4254 0.3870 0.3800 0.4119 y 0.3820 0.4044 0.4260 0.4068 y 0.4044 0.3820 0.3580 0.3730 Reference CCT : 3900~3200K Reference CCT : 3900~3200K f0 f1 x 0.4350 0.4732 0.4600 0.4254 x 0.4600 0.4254 0.4119 0.4440 y 0.4260 0.4398 0.4152 0.4044 y 0.4152 0.4044 0.3730 0.3847 Reference CCT : Reference CCT : 3200~2700K 3200~2700K f2 x 0.4732 0.4600 0.4440 0.4800 0.5165 y 0.4398 0.4152 0.3847 0.3960 0.4510 Reference CCT : 2700~2300K SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 6 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637 AA3021PR4S/Z Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 7 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637 PACKING & LABEL SPECIFICATIONS AA3021PR4S/Z SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 8 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637