SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 1 OF 8
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637
Part Number: AA3021PR4S/Z WARM WHITE
Package Dimensions
3.0x2.0mm SURFACE MOUNT LED LAMP
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3.Specifications are subject to change without notice.
4. 4. The device has a single mounting surface. The device must be mounted according to the specifications.
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
PRELIMINARY SPEC
Features
z 3.0MM X 2.0MM, 1.3MM HIGH, ONLY MINIMUM
SPACE REQUIRED.
z SUITABLE FOR COMPACT OPTOELECTRONIC
APPLICATIONS.
z LOW POWER CONSUMPTION.
z PACKAGE : 2000PCS / REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
z ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V.
z TYP. COLOR TEMPERATURE: 3400K
z COLOR COORDINATES:X=0.41,Y=0.39 ACC. TO
CIE1931.
z OPTICAL EFFICIENCY: 31.3 lm/W(TYP.)
z COLOR REPRODUCTION INDEX: 70
z RoHS COMPLIANT.
Applications
ztraffic signaling.
zbacklighting (illuminated advertising , general lighting).
zinterior and exterio r automotive lighting.
zsubstitution of micro incandes cent lamps.
zreading lamps.
zsignal and symbol luminaire for orientation.
zmarker lights (e.g. steps, e xit ways, etc).
zdecorative and entertainme nt lighting.
zindoor and outdoo r commercial and residential
architectural lighting.
Description
The source color devices are made with InGaN Light
Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 2 OF 8
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might leads to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or
damage the internal circuitry.
4. During surface-mounting, the pickup capillary diameter should be larger than the silicone lens to insure the capillary
does not scratch or damage the lens.
SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 3 OF 8
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637
Selection Guide
Parameter Symbol Value Unit
Power dissipation Pt 111 mW
Reverse Voltage VR 5 V
Junction temperature TJ 110 °C
Operating Temperature Top -40 To +85 °C
S torage Temperature Tstg -40 To +100 °C
DC Forward Current IF 30 mA
Peak Forward Current Note4 IFM 100 mA
Thermal resistance
Junction/ambient Note5
Junction/solder point
Rth JA
Rth JS
250
100
°C/W
°C/W
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Parameter Symbol Value Unit
Chromaticity coordinate x acc.to CIE1931
IF=20mA [Typ.] X 0.41 -
Chromaticity coordinate y acc.to CIE1931
IF=20mA [Typ.] Y 0.39 -
Forward Voltage IF=20mA [Min.]
VF Note1
2.7
V Forward Voltage IF=20mA [Typ.] 3.2
Forward Voltage IF=20mA [Max.] 3.7
Reverse Current (VR=5V) [Typ.] IR 0.01 μA
Reverse Current (VR=5V) [Max.] 10
Temperature coefficient of x
IF=20mA, -10°C≤ T≤100°C [Typ.] TC x -0.1 10-3 /°C
Temperature coefficient of y
IF=20mA, -10°C≤ T≤100°C [Typ.] TCy -0.2 10-3 /°C
Temperature coefficient of VF
IF=20mA, -10°C≤ T≤100°C [Typ.] TCV -2.5 mV/°C
Notes:
1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%.
3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data.
For the purpose of product enhancement, the typical data is subject to change without prior notice.
4.1/10 Duty Cycle, 0.1ms Pulse Width.
5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm2 per pad),
Note:
1. Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V.
Part No. Dice Lens Type
luminous Intensity Note2
Iv(mcd) @ 20mA
Φv (mlm) Note3
@ 20mA
V
iewing
Angle Note1
Min. Typ. Typ. 2θ1/2
AA3021PR4S/Z WARM WHITE (InGaN) WATER CLEAR 480 600 2000 125°
SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 4 OF 8
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637
Warm White AA3021PR4S/Z
Brightness codes
luminous Intensity Note1
Iv(mcd) @ 20mA Φv (mlm) Note2
@ 20mA
Code. Min. Max. Typ.
T 650 1100 2100
U 900 1500 2300
S 480 750 1900
Notes:
1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%.
2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For
the purpose of product enhancement, the typical data is subject to change without prior notice.
SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 5 OF 8
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637
AA3021PR4S/Z
SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 6 OF 8
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637
AA3021PR4S/Z
Warm White CIE
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.48
0.50
0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52 0.54
d1
d0 d3
d2 f1
f0 f2
d0 d1
x 0.3610 0.3575 0.3870 0.3942 x 0.3575 0.3545 0.3800 0.3870
y 0.3850 0.3612 0.3820 0.4068 y 0.3612 0.3408 0.3580 0.3820
Reference CCT : 4700~3900K Reference CCT : 4700~3900K
d2 d3
x 0.3870 0.4254 0.4350 0.3942 x 0.4254 0.3870 0.3800 0.4119
y 0.3820 0.4044 0.4260 0.4068 y 0.4044 0.3820 0.3580 0.3730
Reference CCT : 3900~3200K Reference CCT : 3900~3200K
f0 f1
x 0.4350 0.4732 0.4600 0.4254 x 0.4600 0.4254 0.4119 0.4440
y 0.4260 0.4398 0.4152 0.4044 y 0.4152 0.4044 0.3730 0.3847
Reference CCT : 3200~2700K Reference CCT : 3200~2700K
f2
x 0.4732 0.4600 0.4440 0.4800 0.5165
y 0.4398 0.4152 0.3847 0.3960 0.4510
Reference CCT : 2700~2300K
SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 7 OF 8
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637
AA3021PR4S/Z
Tape Specifications
(Units : mm) Reel Dimension
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
SPEC NO: DSAH4043 REV NO: V.1 DATE: MAY/14/2007 PAGE: 8 OF 8
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002637
PACKING & LABEL SPECIFICATIONS AA3021PR4S/Z
