BY
BY
DO NOT
SCALE FROM
THIS PRINT
MMS-1XX-02-XXX-XX-XX-XXX
No OF POSITIONS
-02 THRU -40
(PER ROW)
ENTRY/ROW SPECIFICATION
-SH: SINGLE ROW, HORIZONTAL ENTRY
-DH: DOUBLE ROW, HORIZONTAL ENTRY
-SV: SINGLE ROW, VERTICAL (TOP) ENTRY
-DV: DOUBLE ROW, VERTICAL (TOP) ENTRY
LEAD STYLE
-02: SURFACE MOUNT
PLATING SPECIFICATION
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-T: MATTE TIN OVER ENTIRE CONTACT
-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,
TIN LEAD (90/10 ±5%) TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-TM: MATTE TIN OVER ENTIRE CONTACT
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
POLARIZING OPTION
-XXX INDICATES POSITION No
(USE PK-07-N)
OPTION
-LC: LOCKING CLIP
(NOT AVAILABLE ON -SV)
(USE LC-06-TM, SEE FIG 1,
FIG 2 & 3, SHT 2 & NOTES 6 & 7)
-P: PICK & PLACE PAD
(ONLY AVAILABLE ON -SV & -DV, 4 POS MIN)
(-SV: USE PPP-09; -DV: USE PPP-03;
SEE FIG 5, SHT 2)
-M: METAL PICK & PLACE PAD
(ONLY AVAILABLE ON -DV)
(USE LMP-03, SEE FIG 7, SHT 3)
-A: MOLDED ALIGNMENT PIN
(AVAILABLE ON -DV ONLY)
(USE MMS-XX-D-VXX, SEE FIG 4, SHT 2)
-K: POLYIMIDE FILM PAD
(AVAILABLE ONLY ON -SV, 3 POS MIN &
-DV, 4 POS MIN)
(USE K-500-300, SEE FIG 6, SHT 3)
-TR: TAPE & REEL PACKAGING
(SEE FIG 8, SHT 3)
(No. OF POS x .0787[2.000]) + .022[0.56]
-
.015
+
.005
(TOL ACCUM)(SEE NOTES 6 & 9)
.1750 4.445
REF
(No OF POS - 2) x .07874[2.0000])
.056 1.42
REF (TYP)
.1574 3.998
REF
01
02
79
80
-DV-LC
90°
-
0°
+
7°
.1770
-
.002
+
.004 4.496
-
0.051
+
0.102
(SEE NOTE 8)
.048
(TYP)
1.22
.010
REF
0.25
.055 1.40
C
C-63-22-XXX
-DV-LC
MMS-40-D
C
LC-06-X
.006[0.15]
.0787
REF
2.000
01
02 40
-SV
90°
-
0°
+
7°
.048
(TYP)
1.22
.1770
-
.002
+
.004 4.496
-
0.051
+
0.102
(SEE NOTE 8)
C
C-63-22-XXX
-SV
MMS-40-S
C
.006[0.15]
.232
-
.000
+
.005 5.89 0.00
+
0.13
C-63-22-XXX
-DV
IN-PROCESS
.232
-
.000
+
.005 5.89 0.00
+
0.13
C-63-22-XXX
-SV
C
FIG 1
MMS-140-02-XXX-XV-LC SHOWN
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
2mm SURFACE MOUNT BOX CONNECTOR STRIP ASM
BY:
MMS-1XX-02-XXX-XX-XX-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
04/01/1994
4
1
SHEET SCALE: 3:1
INSULATOR: VECTRA E130i, COLOR: BLACK
CONTACT: PHOS BRONZE
F:\DWG\MISC\MKTG\MMS-1XX-02-XXX-XX-XX-XXX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM ALLOWABLE SWAY: 2° IN EITHER DIRECTION
3. MAXIMUM BURR ALLOWANCE: .003[0.08]
4. MAXIMUM CUT FLASH: .020[0.51].
5. MINIMUM RETENTION FORCE: SINGLE ROW: .5 LB, DOUBLE ROW: 1 LB
6. CUT BODIES FROM MMS-40-D OR MMS-40-S FOR ALL STYLES EXCEPT -LC.
FOR -LC, USE POSITIONALIZED BODIES.
7. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION IS
NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL
PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
8. THIS DIMENSION TO BE MEASURED AT BEND.
9. FOR -SV LEAD STYLE, EVEN POSITON CUTS LOSE 2 POSITIONS PER CUT; ODD
POSITION CUTS LOSE 1 POSITION PER CUT.
10. LEAD STYLE -02-SH, POSITIONS 2 THRU 4 TO BE PACKAGED IN BOXES. ALL OTHER ROW
SPECIFICATIONS SHOULD BE TUBED ACCORDING TO TABLE 2, REGARDLESS OF POSITION.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION BY
.1574 3.998
REF
(No OF POS - 2) x .07874[2.0000])
.010 0.25
REF (TYP)
01
02
79
80
MMS-40-D-LC
FIG 3
MMS-140-02-XXX-DH-LC SHOWN
FLUSH TO
.007
MAX
0.18
BELOW BODY
90°
±5°
.055
(TYP)
1.40
.056
REF
1.42
.055 1.40
BY
C-63-07-XXX C-63-08-XXX
C
C
LC-06-X
.006[0.15]
.060 1.52
.128 3.25
IN-PROCESS
C-63-08-XXX
C-63-07-XXX
.0787
REF
2.000
.010 0.25
REF (TYP)
(No OF POS - 2) x .07874[2.0000])
01 40
FIG 2
MMS-140-02-XXX-SH-LC SHOWN
MMS-40-S-LC
.175
REF
4.45
.055
(TYP)
1.40
FLUSH TO
.005 0.13
BELOW BODY
90°
±3°
.056
REF
1.42
.055 1.40
BY
C
C-63-06-XXX
C
LC-06-X
.006[0.15]
.060 1.52 .061 1.55
IN-PROCESS
C-63-06-XXX
(No OF POS - 2) x .07874[2.0000])
FIG 4
-A: MOLDED ALIGNMENT PIN
ONLY AVAILABLE ON -DV
MMS-140-02-XXX-DV-A SHOWN
SAME AS FIG 1, EXCEPT AS SHOWN
MMS-40-D-V40
.032 0.81
REF
.025 0.64
REF
.300 7.62
REF
"L"
REF
(("L"/2) - .150[3.81])
±.020
[0.51]
-SV-P
PPP-09
.227
-
.004
+
.006 5.77
-
0.102
+
0.152
.150 3.81
REF
.394 10.01
REF
"L"
REF
(("L"/2) - .197[5.00])
±.020
[0.51]
-DV-P
PPP-03
.227
-
.004
+
.006 5.77
-
0.102
+
0.152
.225 5.72
REF
FIG 5
-P: PICK & PLACE PAD
ONLY AVAILABLE ON -SV & -DV
MMS-140-02-XXX-XV-P SHOWN
SAME AS FIG 1, EXCEPT AS SHOWN
"L" = (No OF POSITIONS x .07874[2.0000]) + .022[0.56]
SHEET OF
2mm SURFACE MOUNT BOX CONNECTOR STRIP ASM
BY:
MMS-1XX-02-XXX-XX-XX-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
04/01/1994
4
2
SHEET SCALE: 3:1
REVISION BY
F:\DWG\MISC\MKTG\MMS-1XX-02-XXX-XX-XX-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
"R"
REF
"S"
±.020
.019
±.010
0.49
±0.25
-SV-K
K-500-300
*
.182 4.62
.118 3.00
"M"
REF
"P"
±.020
.030
±.010
0.75
±0.25
-DV-K
K-500-300
*
.182 4.62
.2165
±.0050
5.499
±0.127
.225 5.72
REF
"L"
REF
(("L"/2) - .1125[2.858])
±.020
[0.51]
"L" = (No OF POSITIONS x .07874[2.0000]) + .022[0.56]
.185 4.70
LMP-03
FIG 6
-K: POLYIMIDE FILM PAD
ONLY AVAILABLE ON -SV & -DV
MMS-140-02-XXX-XV-K SHOWN
SAME AS FIG 1, EXCEPT AS SHOWN
"R" = USED MEASURED DIMENSION
"S" = ("R" - .118[3.00]) / 2
*DIM WILL BE .187[4.75] IF POLARIZATION KEY IS UNDER PAD.
FIG 7
-M: METAL PICK & PLACE PAD
ONLY AVAILABLE ON -DV
MMS-140-02-XXX-DV-M SHOWN
SAME AS FIG 1, EXCEPT AS SHOWN
"M" = USED MEASURED DIMENSION
"P" = ("M" - .2165[5.50]) / 2
*DIM WILL BE .187[4.75] IF POLARIZATION KEY IS UNDER PAD.
SHEET OF
2mm SURFACE MOUNT BOX CONNECTOR STRIP ASM
BY:
MMS-1XX-02-XXX-XX-XX-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
04/01/1994
4
3
SHEET SCALE: 3:1
REVISION BY
F:\DWG\MISC\MKTG\MMS-1XX-02-XXX-XX-XX-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
**-SH, -SH-LC
**-SH STYLE SHOWN
USER DIRECTION OF UN-REELING
POCKET NOT DETAILED
CONTACT ENTRY SIDE
FOR ASSEMBLY
MATING SIDE
OF CONNECTOR
FIG 8
-TR: TAPE & REEL PACKAGING
MMS-110-02-XXX-SH SHOWN FOR ORIENTATION OF -SH & -DH STYLES
(MMS-103-02-X-LC, POS 1 TO FACE ROUND HOLES)
-DV (NOT 4 POS), -DV-LC, -DV-A
-DV-LC STYLE SHOWN
-DV-K, -DV-LC-K, -DV-A-K
-DV-K STYLE SHOWN
-DV-P, -DV-LC-P, -DV-A-P
-DV-P STYLE SHOWN
-DH-LC
-SV (NOT -02 THRU -04 POS)
-SV -K
**SEE NOTE 10
FIG 9
TUBE PACKAGING OPTIONS
SHEET OF
2mm SURFACE MOUNT BOX CONNECTOR STRIP ASM
BY:
MMS-1XX-02-XXX-XX-XX-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
04/01/1994
4
4
SHEET SCALE: 3:1
REVISION BY
F:\DWG\MISC\MKTG\MMS-1XX-02-XXX-XX-XX-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
