Contact Terminations: Closed barrel crimp, wire sizes 18 AWG
[1.0mm2] through 24 AWG [0.25mm2].
Shells: Tin-plated male shells may be dimpled for
EMI/ESD ground paths.
Polarization: Trapezoidally shaped shells and polarized
jackscrews.
Locking Systems: Jackscrews and vibration locking systems.
Mechanical Operations: 500 operations minimum per IEC 60512-5
for “ ‘Robi-D’ Open Entry” design.
1000 operations minimum per IEC 60512-5
for PosiBand closed entry female contact.
ELECTRICAL CHARACTERISTICS:
Contact Current Rating: 7.5 amperes nominal for open entry
14 amperes for closed entry. Tested per U.L.
1977, six contacts energized. See tempera-
ture rise curve on page 2 for details.
Initial Contact Resistance: 0.008 ohms maximum for open entry
0.005 ohms maximum for closed entry
Proof Voltage: 1000 V r.m.s.
Insulator Resistance: 5 G ohms.
Clearance and Creepage
Distance [minimum]: 0.039 inch [1.0mm].
Working Voltage: 300 V r.m.s.
CLIMACTIC CHARACTERISTICS:
Temperature Range: -55°C to +125°C.
Damp Heat, Steady State: 10 days.
THERMOCOUPLE CONTACTS:
Size 20 crimp contacts are available. See page 41 for details.
PCB mount contacts are available in HDC series, see page 27 for details.
ORD SERIES TECHNICAL CHARACTERISTICS
MATERIALS AND FINISHES:
Insulators: Glass filled DAP per ASTM-D-5948, SDG-F,
UL 94V-0, green color.
Contacts: Precision machined copper alloy.
Contact Plating: Industrial performance - gold flash over nick-
el plate. Other finishes available upon
request.
Shells: Steel or brass with tin plate; zinc plate with
chromate seal, stainless steel passivated.
Other materials and finishes available
upon request.
Mounting Spacers: Nylon; copper alloy or steel with zinc
plate and chromate seal or tin plate;
phosphor bronze with tin plate; stainless
steel, passivated.
Vibration Lock Systems: Slide lock and lock tabs, steel with nickel
plate.
Jackscrew Systems: Brass or steel with zinc plate and chro-
mate seal or clear zinc plate or tin plate;
stainless steel, passivated.
Hoods: Composite and plastic, UL 94V-0; brass or
steel with zinc plate and chromate seal;
aluminum or aluminum with electroless
nickel plate; die cast zinc.
Non-magnetic versions are available, contact Technical Sales.
MECHANICAL CHARACTERISTICS:
Removable Contacts: Insert contact to rear face of insulator and
release from rear face of insulator. Size 20
contact, male - 0.040 inch [1.02mm] mat-
ing diameter. Female contacts - rugged
“Robi-D” open entry design or PosiBand
closed entry design, see page 1 for
details.
Contact Retention
In Insulator: 9 lbs. [40 N]. 38
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
ORD SERIES
D-Sub
Positronic Industries
connectpositronic.com
PROFESSIONAL / INDUSTRIAL QUALITY
REMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
Size 20 Signal and
Thermocouple Contacts,
Crimp Removable
Two Performance Levels
For Best Cost /
Performance Ratio
IEC Publication 60807-3
Performance Level Two - Professional
Performance Level One - Industrial
ORD series connectors are low cost quality connectors with
closed barrel crimp removable contacts. ORD series connec-
tors are recommended for use in sheltered, mildly corrosive
environments having a wide range of temperatures with normal
ventilation where high performance is required.
ORD series connectors utilize precision-machined contacts
to provide durability. Female contacts feature the low cost, high
performance Robi-D open entry design, meeting the perform-
ance requirements of IEC 60807-3, Performance Level Two.
Female PosiBand closed entry contacts are optional and meet
IEC 807-3, Performance Level One.
Six standard contact variants are offered in arrangements of
9, 15, 25, 29, 37, and 50 contacts. ORD series connectors are
mateable and compatible with all D-Subminiature connectors
conforming to MIL-DTL-24308, IEC 60807-2, and IEC 60807-3.
A wide assortment of cable support hoods and locking sys-
tems is available from stock.
P
O
S
I
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
•
p
e
r
E
U
D
i
r
e
c
t
i
v
e
2
0
0
2
/
9
5
/
E
C
•
RoHS
RoHS
Compliant
For RoHS options
see page 42.
39 DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
ORD SERIES
D-Sub
Positronic Industries
connectpositronic.com
PROFESSIONAL / INDUSTRIAL QUALITY
REMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
K
M
G
H
0.375 [9.53]
Max.
10° Typ.
Ø0.120±0.005 [Ø3.05±0.13]
Mounting hole, two places
0.036±0.008
[0.91±0.20]
0.050±0.010
[1.27±0.25]
E
B1
B
A
C
D1 D
two places (02 option)
Ø0.154 [3.91] Mounting hole,
Ø0.120±0.005 [Ø3.05±0.13]
Mounting hole, two places
for stainless steel shell (0 option) [
Mounting hole, two places
Total diametral float
0.032 [0.81] Ø0.086
+0.005
-0.000
0.120±0.010 [3.08±0.25]
+0.13
-0.00
Ø2.18 ]
STANDARD SHELL ASSEMBLY
OPTIONAL SHELL ASSEMBLY
WITH UNIVERSAL FLOAT MOUNTS (F)
OPTIONAL SHELL ASSEMBLY (0, 02)
222120
312
2423 26 2725 3028 29 32 3331
654 87 12111091413
3634 35 37
171615 1918
383534 3736 39 40 4341 42
5
18 20 2119
21 43
242322 272625
761098
45 4644 49
47 48 50
333028 29 3231
131211 161514 17
9876
15423
1514
121110913
32
1876
54
14
12
252423
22212018
17 19
1615
8
76
543 131210
911
21
11 12
20
21
26
1716
242322
13 14 15
25 2927 28
19
18
76543 1098
CONTACT VARIANTS
FACE VIEW OF MALE OR REAR VIEW OF FEMALE
CONNECTOR
VARIANT SIZES
A
±0.015
[0.38]
B
±0.005
[0.13]
B1
±0.005
[0.13]
C
±0.005
[0.13]
D
±0.005
[0.13]
D1
±0.005
[0.13]
E
±0.015
[0.38]
G
±0.010
[0.25]
H
±0.010
[0.25]
K
±0.005
[0.13]
M
±0.010
[0.25]
ORD 9 M 1.213
[30.81]
0.666
[16.92]
0.984
[24.99]
0.329
[8.36]
0.494
[12.55]
0.759
[19.28]
0.422
[10.72]
0.233
[5.92]
0.422
[10.72]
ORD 9 F
ORD 9 S
1.213
[30.81]
0.643
[16.33]
0.984
[24.99]
0.311
[7.90]
0.494
[12.55]
0.759
[19.28]
0.422
[10.72]
0.243
[6.17]
0.429
[10.90]
ORD 15 M 1.541
[39.14]
0.994
[25.25]
1.312
[33.32]
0.329
[8.36]
0.494
[12.55]
1.083
[27.51]
0.422
[10.72]
0.233
[5.92]
0.422
[10.72]
ORD 15 F
ORD 15 S
1.541
[39.14]
0.971
[24.66]
1.312
[33.32]
0.311
[7.90]
0.494
[12.55]
1.083
[27.51]
0.422
[10.72]
0.243
[6.17]
0.429
[10.90]
ORD 25 M 2.088
[53.04]
1.534
[38.96]
1.852
[47.04]
0.329
[8.36]
0.494
[12.55]
1.625
[41.28]
0.422
[10.72]
0.230
[5.84]
0.426
[10.82]
ORD 25 F
ORD 25 S
2.088
[53.04]
1.511
[38.38]
1.852
[47.04]
0.311
[7.90]
0.494
[12.55]
1.625
[41.28]
0.422
[10.72]
0.243
[6.17]
0.429
[10.90]
ORD 29 M 1.770
[44.96]
1.274
[32.36]
1.534
[38.96]
0.450
[11.43]
0.605
[15.37]
1.322
[33.58]
0.539
[13.69]
0.217
[5.51]
0.426
[10.82]
ORD 29 F
ORD 29 S
1.770
[44.96]
1.251
[31.78]
1.534
[38.96]
0.431
[10.95]
0.605
[15.37]
1.322
[33.58]
0.539
[13.69]
0.237
[6.02]
0.429
[10.90]
ORD 37 M 2.729
[69.32]
2.182
[55.42]
2.500
[63.50]
0.329
[8.36]
0.494
[12.55]
2.272
[57.71]
0.422
[10.72]
0.230
[5.84]
0.426
[10.82]
ORD 37 F
ORD 37 S
2.729
[69.32]
2.159
[54.84]
2.500
[63.50]
0.311
[7.90]
0.494
[12.55]
2.272
[57.71]
0.422
[10.72]
0.243
[6.17]
0.429
[10.90]
ORD 50 M 2.635
[66.93]
2.079
[52.81]
2.406
[61.11]
0.441
[11.20]
0.605
[15.37]
2.178
[55.32]
0.534
[13.56]
0.230
[5.84]
0.426
[10.82]
ORD 50 F
ORD 50 S
2.635
[66.93]
2.064
[52.43]
2.406
[61.11]
0.423
[10.74]
0.605
[15.37]
2.178
[55.32]
0.534
[13.56]
0.243
[6.17]
0.429
[10.90]
ORD 9 ORD 15
ORD 29
ORD 25
ORD 37 ORD 50
40
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
ORD SERIES
D-Sub
Positronic Industries
connectpositronic.com
PROFESSIONAL / INDUSTRIAL QUALITY
REMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
MALE CONTACTFEMALE CONTACT
“CLOSED ENTRY” DESIGN
0.066
[1.68]
ØA
0.170+0.015-0.020
[4.32+0.38-0.51]
Ø0.040 [1.02]
0.170+0.015-0.020
[4.32+0.38-0.51]
0.066
[1.68]
ØA
0.538 [13.67] 0.550 [13.97]
REMOVABLE CRIMP CONTACTS
CODE 1
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
CLOSED CRIMP BARREL
FEMALE
PART NUMBER
WIRE SIZE
AWG/[mm2]ØA
FC6020D2 20 / 22 / 24
[0.5/0.3/0.25]
0.045
[1.14]
FC6026D2 26 / 28 / 30
[0.12/0.08/0.05]
0.027
[0.69]
MALE
PART NUMBER
WIRE SIZE
AWG/[mm2]ØA
MC6020D 20 / 22 / 24
[0.5/0.3/0.25]
0.045
[1.14]
MC6026D 26 / 28 / 30
[0.12/0.08/0.05]
0.027
[0.69]
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
For information regarding crimp tool and crimping tool techniques, see Application Tools section, pages 78-83.
0.170+0.015-0.020
[4.32+0.38-0.51]
0.538 [13.67]
Ø0.066
[1.68]
Ø0.045
[1.14]
FEMALE CONTACT
“ROBI-D OPEN ENTRY” DESIGN
FEMALE
PART NUMBER
WIRE SIZE
AWG/[mm2]
FC6120D 20 / 22 / 24
[0.5/0.3/0.25]
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
REMOVABLE CRIMP CONTACTS
CODE 1
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
CLOSED CRIMP BARREL
PLATING:
STANDARD FINISH: Gold flash over nickel plate.
OPTIONAL FINISHES: 0.000030 [0.76] gold over nickel by adding “-14” suffix onto part number. Example: FC6120D-14
0.000050 inch [1.27] gold over nickel by adding “-15” suffix onto part number. Example: FC6120D-15
PLATING:
STANDARD FINISH: Gold flash over nickel plate.
OPTIONAL FINISHES: 0.000030 [0.76] gold over nickel by adding “-14” suffix onto part number. Example: FC6120D2-14
0.000050 inch [1.27] gold over nickel by adding “-15” suffix onto part number. Example: MC6026D-15
41 DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
ORD SERIES
D-Sub
Positronic Industries
connectpositronic.com
PROFESSIONAL / INDUSTRIAL QUALITY
REMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
For information regarding crimp tool and crimping tool techniques, see Application Tools section, pages 78-83.
MC6018DFC6118D
*FEMALE CONTACT
“ROBI-D OPEN ENTRY” DESIGN MALE CONTACT
* FEMALE POSIBAND CLOSED ENTRY CONTACTS ARE AVAILABLE, SEE PAGE 36 FOR DETAILS.
PLATING:
STANDARD FINISH: Gold flash over nickel plate.
OPTIONAL FINISHES: 0.000030 [0.76] gold over nickel by adding “-14” suffix onto part number. Example: FC6118D-14
0.000050 inch [1.27] gold over nickel by adding “-15” suffix onto part number. Example: MC6018D-15
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
* Color Code
ØA
ØB
0.170+0.015-0.020
[4.32+0.38-0.51]
Ø0.040 [1.02]
0.170+0.015-0.020
[4.32+0.38-0.51]
ØA
ØB
* Color Code
0.538 [13.67] 0.550 [13.97]
FEMALE CONTACT
“CLOSED ENTRY” DESIGN MALE CONTACT
Chromel®and
Alumel®are regis-
tered trademarks of
Hoskins
Manufacturing
Company.
For more information on
the availability of Type J
thermocouple contacts,
and information about
thermocouple contacts
with PCB solder termi-
nation, please contact
Technical Sales.
TYPE MATERIAL FEMALE
PART NUMBER
MALE
PART NUMBER
COLOR
CODE
WIRE SIZE
AWG [mm2]ØA ØB
K
CHROMEL (+) FC6020D2CH†† MC6020DCH†
WHITE 20 / 22 / 24 [0.5 / 0.3 / 0.25] 0.066 [1.68] 0.045 [1.14]
FC6026D2CH MC6026DCH 26 / 28 / 30 [0.12 / 0.08 / 0.05] 0.048 [1.23] 0.027 [0.69]
ALUMEL (-) FC6020D2AL†† MC6020DAL†
GREEN 20 / 22 / 24 [0.5 / 0.3 / 0.25] 0.066 [1.68] 0.045 [1.14]
FC6026D2AL MC6026DAL 26 / 28 / 30 [0.12 / 0.08 / 0.05] 0.048 [1.23] 0.027 [0.69]
T
COPPER (+) FC6020D2CU†† MC6020DCU†
RED 20 / 22 / 24 [0.5 / 0.3 / 0.25] 0.066 [1.68] 0.045 [1.14]
FC6026D2CU MC6026DCU 26 / 28 / 30 [0.12 / 0.08 / 0.05] 0.048 [1.23] 0.027 [0.69]
CONSTANTAN (-) FC6020D2CO†† MC6020DCO†
YELLOW 20 / 22 / 24 [0.5 / 0.3 / 0.25] 0.066 [1.68] 0.045 [1.14]
FC6026D2CO MC6026DCO 26 / 28 / 30 [0.12 / 0.08 / 0.05] 0.048 [1.23] 0.027 [0.69]
E
CHROMEL (+) FC6020D2CH†† MC6020DCH†
WHITE 20 / 22 / 24 [0.5 / 0.3 / 0.25] 0.066 [1.68] 0.045 [1.14]
FC6026D2CH MC6026DCH 26 / 28 / 30 [0.12 / 0.08 / 0.05] 0.048 [1.23] 0.027 [0.69]
CONSTANTAN (-) FC6020D2CO†† MC6020DCO†
YELLOW 20 / 22 / 24 [0.5 / 0.3 / 0.25] 0.066 [1.68] 0.045 [1.14]
FC6026D2CO MC6026DCO 26 / 28 / 30 [0.12 / 0.08 / 0.05] 0.048 [1.23] 0.027 [0.69]
†Dimensionally equivalent to M39029/64-369 ††Dimensionally equivalent to M39029/63-368
REMOVABLE THERMOCOUPLE CONTACTS
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
The crimp area of this contact is not
protected when fully seated in the
connector molding. These contacts
require shrink tubing after installation.
Not suitable for fully loaded connector.
REMOVABLE CRIMP CONTACTS
18 AWG CRIMP CONTACTS
18 AWG [1.0mm2]
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
42
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
ORD SERIES
D-Sub
Positronic Industries
connectpositronic.com
PROFESSIONAL / INDUSTRIAL QUALITY
REMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
*1For additional information on accessories listed in steps
5, 6 and 7, see Accessory Catalog.
*2VL, V3 and V5 locking systems are not available for connector variants 37
and 50. Jackscrews are highly recommended to minimize damage to con-
tacts on variants with high mating forces.
*3For stainless steel dimpled male versions contact Technical Sales.
*4AN and AC hood are not available for connector variant 29. Consult
Technical Sales for availability.
For crimping information and crimp tools,
see Application Tools section, pages 78-83.
ORDERING INFORMATION - CODE NUMBERING SYSTEM
Specify Complete Connector By Selecting An Option From Step 1 Through 8
STEP 3 - CONNECTOR GENDER
M - Male
F - Female - Professional Level
open entry contacts
S - Female - Industrial Level
PosiBand closed entry contacts
123456789
ORD 9 M 0 0 0 0 Z /AA
10
-14
STEP 1 - BASIC SERIES
ORD series STEP 10 - SPECIAL OPTIONS
-14 - 0.000030 [0.76µ] gold over
nickel.
-15 - 0.000050 [1.27µ] gold over
nickel.
CONTACT TECHNICAL SALES
FOR SPECIAL OPTIONS
*1 STEP 6 - HOODS
0 - None.
J - Hood, Top Opening, Plastic.
L - Hood, Side Opening, Plastic.
Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews.
Available in size 50 only.
Y6 - Hood, Top Opening, Plastic with Rotating Male and Female
Polarized Jackscrews. Available in size 50 only.
Z - Hood, Top or Side Opening, Robust Extended Height,
Composite and Plastic with Rotating Male Jackscrews. Available
in size 9, 15, 25, 37, and 50 only.
H - Hood, Top Opening, Metal. Available in size 15, 25, 37, and 50
only.
G - Hood, EMI/RFI, Metal. Available in size 9, 15, 25, 37, and 50
only.
*4 AN - Lightweight Aluminum Hood, nickel finish.
*4 AC - Lightweight Aluminum Hood, no finish.
W - Hood, Top or Side Opening, Plastic. Available in size 9, 15, and
25 only.
*1 STEP 5 - MOUNTING STYLE
0 - Mounting Hole, 0.120 [3.05] Ø.
02 - Mounting Hole, 0.154 [3.91] Ø.
F - Float Mounts, Universal.
S2 - Swaged Spacer, 4-40 Threads, 0.125 [3.18] Length.
S5 - Swaged Locknut, 4-40 Threads.
STEP 4 - CONTACT TERMINATION TYPE
0 - Ordered Without Contacts.
1 - Crimp, 20 AWG-24 AWG [0.5mm2-0.25mm2].
STEP 2 - CONNECTOR VARIANTS
9, 15, 25, 29, 37, 50
STEP
EXAMPLE
STEP 9 - ENVIRONMENTAL
COMPLIANCE
OPTIONS
/AA - Compliant per EU Directive
2002/95/EC (RoHS)
P
O
S
I
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
•
p
e
r
E
U
D
i
r
e
c
t
i
v
e
2
0
0
2
/
9
5
/
E
C
•
RoHS
RoHS
Compliant
*1 STEP 7 - LOCKING AND POLARIZING SYSTEMS
0 - None.
*2 V3 - Lock Tab, connector front panel mounted.
*2 V5 - Lock Tab, connector rear panel mounted.
*2 VL - Lock Lever, used with Hoods Only.
T - Fixed Female Jackscrews.
T2 - Fixed Female Jackscrews.
T6 - Fixed Male and Female Polarized Jackscrews.
E - Rotating Male Jackscrews.
E2 - Rotating Male Screw Locks.
E3 - Rotating Male with internal hex for 3/32 hex drives
E6 - Rotating Male and Female Polarized Jackscrews.
NOTE: If compliance to environmental
legislation is not required, this step will not
be used. Example: ORD9M0000Z
NOTE: Once you have made a connector selection, contact
Technical Sales if you would like to receive a drawing in DXF, PDF
format or a 3-dimensional IGES, STEP, or SOLIDWORKS file.
SK Drawing 3-dimensional model
STEP 8 - Shell Options
0 - Zinc plated, with chromate seal.
C - Cadmium plated with chromate seal.
*3S - Stainless steel, passivated.
X - Tin plated.
Z - Tin plated and dimpled (male connectors only).
