IRANSYS . TIPP115, TIPP116, TIPP117 TRON! j } 1 man 7 PNP SILICON POWER DARLINGTONS 20 W Pulsed Power Dissipation LP PACKAGE (TOP VIEW) 100 V Capability 2 A Continuous Collector Current 4 A Peak Collector Current absolute maximum ratings at 25C case temperature (unless otherwise noted) RATING SYMBOL VALUE UNIT TIPP115 -60 Collector-base voltage (Ip = 0) TIPP116 Vecso -80 Vv TIPP117 -100 TIPP115 -60 Collector-emitter voltage (lp = 0) TIPP116 VcEo -80 Vv TIPP117 -100 Emitter-base voltage VEBo 5 Vv Continuous collector current lo -2 A Peak collector current (see Note 1) lom -4 A Continuous base current lB -50 mA Continuous device dissipation at (or below) 25C case temperature (see Note 2) Prot 0.8 WwW Pulsed power dissipation (see Note 3) Py 20 WwW Operating junction temperature range Tj -55 to +150 C Storage temperature range Tstg -55 to +150 C Lead temperature 3.2 mm from case for 10 seconds TL 260 C NOTES: 1. This value applies for t, < 0.3 ms, duty cycle < 10%. 2. Derate linearly to 150C case temperature at the rate of 0.32 W/C. 3. Voge = 20 V, Ilo = 1A, Pw = 10 ms, duty cycle < 2%.TIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS electrical characteristics at 25C case temperature PARAMETER TEST CONDITIONS MIN TYP | MAX | UNIT TIPP115 -60 Collector-emitter ViBrRycEO breakdown voltage fe = -10mA lB =0 TIPP116 -80 V (see Note 4) TIPP117 -100 Vop = -30V Veg = 0 TIPP115 -2 Collector-emitter CE BE IcEO cut-off current Voce = -40V Vee =0 TIPP116 -2 mA Voce = -50 V Vee = 0 TIPP1 17 -2 VoE= -60 V lp =O TIPP115 -1 Collector-base IcBo cut-off current Vee = -80V lp =0 TIPP116 -1 mA Voge = -100 V Ip =O TIPP117 -1 Emitter cut-off lEBo current Ves = -V lo =0 -2 mA Forward current Vecpe= 4V Ic=-1A 1000 Nee . _ _ (see Notes 4 and 5) transfer ratio Vecpe= 4V Ic=-2A 500 Collector-emitter VocE(sat) saturation voltage lIp= -8mA Ic=-2A (see Notes 4 and 5) -2.5 Vv Vee soemnitter Voe= -4V Ip=-2A (see Notes 4 and 5) 28] Vv BE voltage CE ce Parallel diode Vec le= 4A lp =O (see Notes 4 and 5) -3.5 Vv forward voltage NOTES: 4. These parameters must be measured using pulse techniques, t, = 300 us, duty cycle < 2%. 5. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts.TIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS MECHANICAL DATA LP0OO3 (TO-92) 3-pin cylindical plastic package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. LP0O3 Falls Within JEDEC LP003 (TO-92) TO-226AA Dimensions 5,21 ' 4,44 4,19 3,43 MIN. k 317 \ 2,67 2,67 L 203 2,03 aa a 5,34 Seating Plane 4,32 ty 1,27 (see Note A) 12,7 MIN. 0,56 0,40 0,41 0,35 ALL LINEAR DIMENSIONS IN MILLIMETERS NOTE A: Lead dimensions are not controlled in this area.TIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS MECHANICAL DATA LP0O3 (TO-92) 3-pin cylindical plastic package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. LPOO3 (TO-92) - Formed Leads Version LP0O3 Falls Within JEDEC 521 TO-226AA Dimensions 4,44 3,43 MIN. 4,19 < 3,17 2,67 2,67 2,03 2,03 i A 5,34 4,32 i 4,00 MAX. 0,56 0,40 0,41 0,35 2,90 2,40 g ALL LINEAR DIMENSIONS IN MILLIMETERSTIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS MECHANICAL DATA LPR tape dimension s LP Package (TO-92) Tape (Formed Lead Version) 5,21 444. > \ 3,43 MIN. , 4,19 + <_ 2,67 2,67 | 203. i 303 " aA 5,34 4,32 v 4,00 MAX. 0,56 0,41 0,40 0,35 > \ 32,00 | ij 050 23,00 27,68 T 2,50 MIN. 17,66 1650 & ttt 15,50 4490 i Uv J | 8,50 v i 5,50 19,00 f 17,50 2,90 240 7 @ 430 J lef 2.90 3,70 2,40 6,75 595.) t 13,00 73.40 ALL LINEAR DIMENSIONS IN MILLIMETERS