8Pcatalog 08.11.17 1:55 PM 1 (R) RoHS RoHS Compliant TP7 & 9 Series Part Numbering System Example: TP96G00N 20S B103 A104 M7-5mm Shaft-6mm dia TP 9 6 G 00 N 20 S POT #1 POT #2 B 103 A 104 (R) TP7 & TP9 Series Potentiometers & Coded Switches Potentiometers Style TP = Horizontal RH =Vertical Resistance Code First & Second Digit = Value Third Digit = Multiplier Example: 103 = 10,000 Size 7 = 7mm 9 = 9mm Resistance Taper A = Audio (CW Log) B = Linear C = CCW Log Type 6 = 300 Deg Rotation 0 = Non Element, Encoder or Switch Encoders & Coded Switches For channel select Shaft Ending SK = Slotted & Knurled S = Screw Driver Slot F = Flatted Structure N = Single Unit Single Shaft G = Dual Unit Single Shaft D = Dual Unit Dual Shaft F = Triple Unit Dual Shaft Q = Quad Unit Single Shaft T = Triple Unit Single Shaft Combinations* 00 = No Combination 01 = Center Detent 17 = High Torque 97 = Sealed with Shaft O ring 975 = Stainless Steel Shaft of combinations are available. * Hundreds Contact Tocos for combinations options For volume control Shaft Length in mm Including Bushing Switch Type Blank No Switch N = Rotary Switch A = Momentary Push On NA = Rotary + Mom Push On E20 = Rotary Encoder 1) 2) 3) 4) 5) 6) 7) Choose the potentiometers structure. Select a combination, if none use 00. Select switch type, if none leave blank. Select shaft length,including the bushing. Standards are 15 & 20mm. Select shaft ending. Select taper and ohmic value. Determine bushing and shaft sizes. (Other combinations are available) ISO9000, ISO14000 Certified Tokyo Cosmos Electric Co., Ltd. SELECTION GUIDE 2-268 Sobudai, Zama Kanagawa 228-8510 Japan TEL 81-46-253-2116 FAX 81-46-253-3640 Web: www.tocos-j.co.jp E-mail: int@tocos-j.co.jp AMERICA, INC. 1177 East Tower Road, Schaumburg, IL 60173 TEL 847-884-6664 FAX 847-884-6665 Web: www.tocos.com E-mail: sales@tocos.com Taiwan Tocos Electric Co., Ltd. No.66-9F, Sec. 1, Chengde Rd., Datong District, Taipei City 10355, Taiwan, R.O.C. TEL +886-2-2555-1811 FAX +886-2-2550-5927 Web: www.tocos.com.tw E-mail: sales@tocos.com.tw Rev.11-16-2008 Tokyo Cosmos Electric Co., Ltd. 8Pcatalog 08.11.17 1:55 PM 3 (R) World's smallest potentiometers !! Major Applications For Volume & Encoders / Switches Potentiometers 1. For Volume + power On-off switches TP76N00N TP96N00N 2. For Volume + squelch + power On-off switches TP76D00N TP96D00N Rotary switch See Page 3 for dwg. Compact & light design optimize customers' space saving requirements TP76D00N Industry-proven robustness Encoders Flexibility to custom design(Shaft & Bushing) 1. For random frequency adjustment TP70N00E20 TP90N00E20 2. For random frequency adjustment + frequency band selector TP70N00AE20 TP90N00AE20 Features 1 Compactness: Robustness: Stainless shafts are optionally available: 1.5 times stronger than brass & aluminum shaft compared to conventional TOCOS shafts. Stainless shafts are ideal for hand-held 2-way radio to avoid accidental drop risks. Variations of switches : Either rotary or push-momentary types can be optionally installed. Multifunction: On-off switch function and band selector function can be combined into one unit. Sealed with O ring in between shaft and bushing (Option): Waterproof meets with IP67 A seal rubber is installed in between a bushing and shaft to prevent water intrusion. High torque models are optionally available Both vertical mount and horizontal types are available. Temp. range: Good in use in wide temp. range Standard: -20 to +70Also optionally available with -30 Push momentary switch See Page 4 for dwg. TP70N00AE20 Coded Switches Vertical types 1. For Pro-use: Channel selector preset to assign frequencies, a particular channel is assigned and fixed when other parties are already known. TP70GF (Dual units with 1 shaft, 16 channels) O ring Waterproof (Option) See Page 5 for dwg. 2 8Pcatalog 08.11.17 1:56 PM 5 RoHS Potentiometers Compliant TP7 Series (7mm) TP76N00N TP9 Series (9mm) TP76D00N TP96N00N Compliant TP7 Series (7mm) TP70N00E20 TP70N00AE20 TP9 Series (9mm) TP90N00E20 TP90N00AE20 Outline Dimensions Outline Dimensions Outline Dimensions Outline Dimensions Outline Dimensions Outline Dimensions Outline Dimensions Outline Dimensions Mounting Hole Dimensions Mounting Hole Dimensions Mounting Hole Dimensions Mounting Hole Dimensions Mounting Hole Dimensions Mounting Hole Dimensions Mounting Hole Dimensions Mounting Hole Dimensions Mechanical Electrical Specifications * Nominal total resistance 1,2,5,10,20,50,100,200,500(k ) * Total rotational angle 300 (Mechanical) * Resistance tolerance * Resistance taper * End resistance * Power rating * Noise * Insulation resistance * Dielectric strength * Max. operating voltage * Derating curve 20% A* B*C 50 max. 0.05W 100mV max. 100M min. at DC250V 1 minute at AC300V DC10V, AC50V * Rotational torque 2 to 24.5mN * m at +20 (20 to 250gf * cm) 49.1mN * m at -20 (500gf * cm max.) * Shaft wobble and bend Radial direction 0.5x Shaft length / 30mm max. Thrust direction 0.5mm max. * Detent position Center, 11 , etc. * Detent torque 2.9-29.4mN * m (30 to 300gf * cm) * Shaft stopper strength TP7 inner shaft of the dual shaft type 0.3N * m (3kgf * cm) min. TP7 others 0.4N * m (4kgf * cm) min. Rated power ratio (%) 100 80 60 TP9 * Shaft push- pull strength * Nut tightening strength 40 (33) 20 0 20 40 60 (70) 80 Environment * Soldering heat resistance 3505 at 3 sec * Operating temperature range * Rotational life * Sealability (Optional) -20 to 70 15,000 cycles without load After mounting a pot on the product. There shall be no leak on shaft & bushing at 9.8kpa (0.1kgf /cm2) by a hydraulic pressure for 30minutes. 0.5N * m (5kgf * cm) min. 98.1 N (10kgf) min. 0.98N * m (10kgf * cm) min. 100 Ambient temperature () 3 TP96D00N RoHS Encoders DC 5V 1mA 2.5mA 10ms max.(15r.p.m) * Contact resistance TP7 10 max. TP9 200 max. * Output signal S.P.S.T.: DC16V-3A; 50max. S.P.S.T.:DC12V-0.5A; 0.5mm Stroke 10,000 cycles without load Initial 50m max. After 10,000 cycles-200m max. * Phase difference Td=T/4T/6 T T=Cycle Td Td A signal Between A-common B signal Between B-common Td ON OFF ON OFF Clock wise Clock wise ON A signal Between A-common B signal Between B-common OFF ON OFF Counter clock wise A signal Between A-common ON B signal Between B-common 50%5% (185.4) * Step angle * Rotational Life 183 50,000 cycles * Rotational torque 2 to 24.5mN * m (0 to +70) (20 to 250gf * cm) (500gf * cm max.) OFF * Please refer to Page 3 for other specifications. Detent point * Resolution * Detent point * Duty ratio 49.1mN max. (0 to -20) OFF ON Switch Specifications * Rotary switch, N: * Momentary push, A: * Switch life * Switch contact resistance: * Voltage rating * Current rating * Max. Operating Current * Chattering 10 pulses 20 detents A-common: ON or OFF B-common: Non provisions 4 8Pcatalog 08.11.17 1:56 PM 7 RoHS Coded Switches Compliant 8CH/16CH 2CH3CH4CH TP70GF series TP70NF series Dual shaft type TP70F & TP70D series 23CH 34CH 23CH (9.35) A B 0.8 C 30.5 5 0.8 A-B B-C B-D B-F 816CH M6 or M7 P0.75 M6 or M7 P0.75 120.5 100.5 20.1 50.3 50.5 0.60.1 6-0.80.1 0 HOLES 9-0.80.1 0 HOLES ON OFF 3.8 3CH CODE A-B B-C 1 2 3 2CH CODE A-C or B-C 1 2 6-0.80.1 0 HOLES 4 D E F A B C 2 3.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 7.70.3 4 0.60.1 A-B B-C B-D B-F A B C 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 6-0.80.1 0 HOLES 4 M6 or M7 P0.75 4 70.5 50.3 C F 30.5 A B D E 20.1 0.8 A-B B-C B-D B-F 16CH CODE20step 300type 16CH CODE22.5step Endless type 5.50.3 0.8 5 (9.35) 7.70.3 3.850.3 M6 or M7 P0.75 1 2 3 4 5 6 7 8 5.50.3 ON OFF 3.850.3 8CH CODE 2 4.2 3.8 4.5 3.8 4CH CODE A-B B-C 1 2 3 4 Electrical characteristics Items Contact resistance Dielectric strength Spec. 2CH 3CH 4CH 8CH ON:1max. OFF:1Mmin. No dielectric strength Insulation resistance 100M min. Conditions 16CH Detent position AC300V at 1 minute Between terminal-Case Between terminal-Shaft DC250V at 1 minute Between terminal-Case Between terminal-Shaft Bushing Option TP7-M7 TP7-M6 TP9-M6(For single shaft only) TP9-M7 TP9-M9 Mechanical characteristics Items Operating force Step angle Rotational angle Terminal strength Strength Shaft stopper strength Shaft wobble and bend Spec. Conditions 9.8-58.8mNm(100-600gfcm) 303 22.53 203 22.53 305605905 157.553005 Endless No damage to case and terminal fall-off. Static load of 4.9N(0.5kgf) Bent terminals shall be acceptable shall be applied to the tip of the terminals for 15secs. No abnormality in electrical in vertical direction(1 time/terminal) characteristics after testing to be seen Shaft pull:98.1N min.(10kgf min.) Static load Shaft push:98.1N min.(10kgf min.) Nut tightening:0.98Nm min.(10kgfcm min.) 0.39Nm min.(4kgfcm min.) Radial:0.5xShaft length/30mm max.(Single shaft,Dual outer shaft) Radial:0.7xShaft length/30mm max.(Dual inner shaft) Thrust:0.5mm max. 2.5N(250gf) applied to tip of the shaft Single shaft Shaft Diameter and Style 3.5mm dia.-F 3.5mm dia.-S 4.75mm dia.-F 4.75mm dia.-S Dual shaft 6mm dia.-F 6mm dia.-S 6mm dia.-SK Dual shaft-F Dual shaft-S Dual shaft-SK Durability characteristics Items Life(Without load) 5 Spec. 5,000 cycles *Please refer to Page 3 for other specifications Conditions Contact resistance(ON):10max. Contact resistance(OFF):1M min. 6