SS29, SS210 www.vishay.com Vishay General Semiconductor High Voltage Surface Mount Schottky Rectifier FEATURES * Low profile package * Ideal for automated placement * Guardring for overvoltage protection * Low power losses, high efficiency * Low forward voltage drop * High surge capability * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C DO-214AA (SMB) * AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS TYPICAL APPLICATIONS IF(AV) 1.5 A VRRM 90 V, 100 V IFSM 75 A VF 0.71 V TJ max. 150 C Package DO-214AA (SMB) Diode variations Single For use in low voltage high frequency inverters, freewheeling, DC/DC converters, and polarity protection applications. MECHANICAL DATA Case: DO-214AA (SMB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified ("_X" denotes revision code e.g. A, B,.....) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 2 whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes the cathode end MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL Device marking code SS29 SS210 S9 S10 UNIT Maximum repetitive peak reverse voltage VRRM 90 100 V Maximum RMS voltage VRMS 63 70 V Maximum DC blocking voltage VDC 90 100 Maximum average forward rectified current (fig. 1) IF(AV) 1.5 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 75 A Peak repetitive reverse surge current at tp = 2 s, 1 kHz IRRM 1.0 A dV/dt 10 000 V/s TJ, TSTG -55 to +150 C Voltage rate of change (rated VR) Operating junction and storage temperature range V Revision: 23-Dec-14 Document Number: 88749 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SS29, SS210 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL SS29 SS210 IF = 0.1 A IF = 1.0 A Maximum instantaneous forward voltage (1) TA = 25 C 0.75 IF = 3.0 A IF = 1.5 A IF = 3.0 A VF V 0.95 0.71 TA = 100 C 0.85 TA = 25 C Maximum DC reverse current at rated VR (1) UNIT 0.43 IR TA = 100 C 30 A 5 mA Note (1) Pulse test: 300 s pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL Maximum thermal resistance (1) SS29 SS210 RJA 85 RJL 25 UNIT C/W Note PCB mounted with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pad areas (1) ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SS210-E3/52T 0.096 52T 750 7" diameter plastic tape and reel SS210-E3/5BT 0.096 5BT 3200 13" diameter plastic tape and reel SS210HE3/52T (1) 0.096 52T 750 7" diameter plastic tape and reel SS210HE3/5BT (1) 0.096 5BT 3200 13" diameter plastic tape and reel SS210HE3_A/H (1) 0.096 H 750 7" diameter plastic tape and reel SS210HE3_A/I (1) 0.096 I 3200 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 2.5 2.0 D = 0.8 Average Power Loss (W) Average Forward Current (A) Resistive or Inductive Load 1.5 1.0 0.5 PCB Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) Copper Pad Areas D = 0.5 2.0 D = 0.3 1.5 D = 1.0 D = 0.2 D = 0.1 1.0 T 0.5 D = tp/T tp 0 0 0 25 50 75 100 125 150 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 Lead Temperature (C) Average Forward Current (A) Fig. 1 - Forward Current Derating Curve Fig. 2 - Forward Power Loss Characteristics Revision: 23-Dec-14 Document Number: 88749 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SS29, SS210 www.vishay.com Vishay General Semiconductor 10 000 Instantaneous Reverse Current (A) Peak Forward Surge Current (A) 100 75 50 25 0 TJ = 150 C 1000 TJ = 125 C 100 10 TJ = 25 C 1 0.1 1 10 10 100 20 30 40 50 60 70 80 90 100 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Fig. 3 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 5 - Typical Reverse Leakage Characteristics 1000 TJ = 150 C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TJ = 125 C 10 TJ = 25 C 1 100 10 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 0.1 1.4 1 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 4 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Junction Capacitance 100 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AA (SMB) Cathode Band Mounting Pad Layout 0.085 (2.159) MAX. 0.155 (3.94) 0.130 (3.30) 0.086 (2.20) 0.077 (1.95) 0.086 (2.18) MIN. 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.096 (2.44) 0.084 (2.13) 0.220 REF. 0.008 (0.2) 0 (0) 0.060 (1.52) 0.030 (0.76) 0.220 (5.59) 0.205 (5.21) Revision: 23-Dec-14 Document Number: 88749 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000