Semiconductor Components Industries, LLC, 2002
January, 2002 – Rev. 2 1Publication Order Number:
MBR2515L/D
MBR2515L
SWITCHMODE
Power Rectifier
...employing the Schottky Barrier principle in a large
metal–to–silicon power diode. State–of–the–art geometry features
epitaxial construction with oxide passivation and metal overlay
contact. Ideally suited for use in low voltage, high frequency
switching power supplies, low voltage converters, OR’ing diodes, and
polarity protection devices.
•Very Low Forward Voltage (0.28 V Maximum @ 19 Amps, 70°C)
•Guardring for Stress Protection
•Highly Stable Oxide Passivated Junction
(100°C Operating Junction Temperature)
•Epoxy Meets UL94, VO at 1/8″
Mechanical Characteristics
•Case: Epoxy, Molded
•Weight: 1.9 grams (approximately)
•Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
•Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
•Shipped 50 Units Per Plastic Tube
•Marking: B2515L
MAXIMUM RATINGS
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
15 V
Average Rectified Forward Current
(Rated VR, TC = 90°C) IF(AV) 25 A
Peak Repetitive Forward Current,
per Leg (Rated VR, Square Wave,
20 kHz, TC = 90°C)
IFRM 30 A
Non–Repetitive Peak Surge Current
(Surge Applied at Rated Load
Conditions Halfwave, Single
Phase, 60 Hz)
IFSM 150 A
Peak Repetitive Reverse Surge
Current (2.0 s, 1.0 kHz) IRRM 1.0 A
Storage Temperature Range Tstg –65 to +125 °C
Operating Junction Temperature TJ–65 to +100 °C
THERMAL CHARACTERISTICS
Thermal Resistance —
Junction to Case RθJC 2.0 °C/W Device Package Shipping
ORDERING INFORMATION
MBR2515L TO–220
http://onsemi.com
TO–220AC
CASE 221B
STYLE 1
50 Units/Rail
3
4
1
SCHOTTKY BARRIER
RECTIFIER
25 AMPERES
15 VOLTS
4
13
MARKING DIAGRAM
B2515L
B2515L = Device Code
MBR2515L
http://onsemi.com
2
ELECTRICAL CHARACTERISTICS
Characteristic Symbol Value Unit
Maximum Instantaneous Forward Voltage (Note 1)
(iF = 25 Amps, TJ = 25°C)
(iF = 25 Amps, TJ = 70°C)
(iF = 19 Amps, TJ = 70°C)
vF0.45
0.42
0.38
Volts
Maximum Instantaneous Reverse Current (Note 1)
(Rated DC Voltage, TJ = 25°C)
(Rated DC Voltage, TJ = 70°C)
IR15
200
mA
1. Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤2.0%.
PACKAGE DIMENSIONS
TO–220
PLASTIC
CASE 221B–04
ISSUE D
B
R
J
D
G
L
H
QT
U
A
K
C
S
4
13
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.595 0.620 15.11 15.75
B0.380 0.405 9.65 10.29
C0.160 0.190 4.06 4.82
D0.025 0.035 0.64 0.89
F0.142 0.147 3.61 3.73
G0.190 0.210 4.83 5.33
H0.110 0.130 2.79 3.30
J0.018 0.025 0.46 0.64
K0.500 0.562 12.70 14.27
L0.045 0.060 1.14 1.52
Q0.100 0.120 2.54 3.04
R0.080 0.110 2.04 2.79
S0.045 0.055 1.14 1.39
T0.235 0.255 5.97 6.48
U0.000 0.050 0.000 1.27
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
STYLE 1:
PIN 1. CATHODE
2. N/A
3. ANODE
4. CATHODE
F
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: r14525@onsemi.com
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
MBR2515L/D
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: ONlit@hibbertco.com
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
