Headquarter Europe MEDER electronic AG Headquarter USA MEDER electronic Inc. Friedrich-List Strasse 6 D-78234 Engen-Welschingen 766 Falmouth Rd Mashpee, MA 02649 Tel.: +49(0)7733-9487-0 Fax: +49(0)7733-9487-32 Phone: +1/ 508-539-0002 Fax: +1/ 508-539-4088 eMail: info@meder.com Internet: www.meder.com eMail: salesusa@meder.com Dimensions (mm) Reed Relay: BE24-1A74-M Part Number: 8824174200 Layout / Pitch 2,54 mm / Top View Marking MEDER-Label Type Layout ProductionCodeEN60062 /Factory Code Pins: 0,65 mm / L 3,2 0,3 mm Coil/Relay Characteristics Conditions at 20C Min. Coil Resistance Nominal Voltage Nominal Rated Power Thermal Resistance Operate Voltage Release Voltage 7061 Typ. Max. Units 7845 24 73 69 8630 VDC mW K/W VDC VDC 16,8 2 Contact Data 74 (Form A/Dry) Contact Rating Switching Voltage Switching Current Carry Current Static Contact Resistance (initial) Insulation Resistance Breakdown Voltage Operate Time, including Bounce Release Time Capacitance Any combination of the switching voltage and current must not exceed the given rated power DC / AC DC or Peak AC DC or Peak AC Measured with Nominal Voltage RH 45% 30 W 200 /250 1,0 2,5 120 V A A m VDC ms ms pF 1011 430 Measured with Nominal Voltage Measured with no coil suppression 0,5 0,2 0,2 Environmental Data Insulation Resistance Coil to Contact Dielectric Strength Coil to Contact Shock Vibration Operating Temperature Storage Temperature Soldering Temperature Cleaning Material of Case Sealing Compound Material of Pins Remarks Customer / Customer part number 1012 2,0 RH 45% 1/2 sine wave, duration 11ms from 10 - 2000 Hz 10C/min max. allowable 10C/min max. allowable 5 sec. at kV AC 50 g 20 g -20 70 C -40 105 C 260 C fully sealed Metal / Magnetic Shielding / Fe Polyurethan Cu-alloy tinned Standard Part Modifications in the sense of technical progress are reserved [VRRp-02.doc] REVISION / Rev. No.: 01 Page 1 of 1 DESIGNED BY: REVISED BY: E.Bunke E.Bunke APPROVED BY: APPROVED BY: R.Rippl R.Rippl DATE : DATE : 1999-02-22 2004-03-10