For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
1
HMC705LP4 / HMC705LP4E
v04.0212
6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17)
General Description
Features
Functional Diagram
Typical Applications
The HMC705LP4(E) is a low noise GaAs HBT
programmable divider in a 4x4 mm leadless surface
mount package. The divider can be programmed to
divide by any number from N = 1 to N = 17 up to
6.5 GHz. The HMC705LP4E’s high frequency
operation along with low phase noise oor is very
useful in high performance fast settling synthesizer
architectures. The HMC705LP4E may be combined
with Hittite’s Phase Frequency Detectors, VCOs
and PLL ICs to create low noise, fast settling phase
locked loops.
Ultra Low SSB Phase Noise Floor:
-153 dBc/Hz @ 100 kHz
Programmable Divider (N= 1 - 17) Operating
up to 6.5 GHz
24 Lead 4X4mm SMT Package: 16mm2
Electrical Specications, TA = +25° C, Vcc = Vcc1 = Vcc2 = +5V
The HMC705LP4(E) is ideal for:
• Satellite Communication Systems
• Point-to-Point Radios
• Military Applications
• Sonet Clock Generation
• Test Equipment
Parameter Conditions Min. Typ. Max. Units
Maximum Input Frequency Sine Wave or Square Wave Input 6.5 GHz
Minimum Input Frequency Sine Wave or Square Wave Input 0.1 GHz
Input Power Range Fin = 0.1 to 6.5 GHz* -15 010 dBm
Output Power Divide-by-2 0dBm
SSB Phase Noise Fin = 6 GHz, N = 17 -153 dBc/Hz
Total Supply Current 190 mA
* For sine wave inputs less than 400 MHz input power must be greater than or equal to -5 dBm
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
2
HMC705LP4 / HMC705LP4E
v04.0212
6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17)
Input Sensitivity Window, All States
Output Power, Divide Ratio
States 1 through 5
Input Sensitivity Window vs. Temperature,
N = 17, T = -40°C to +85°C
Output Power, Divide Ratio
States 6 through 17
Fundamental Feedthru Power, Pin = 0 dBm
-20
-10
0
10
20
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
INPUT POWER (dBm)
INPUT FREQUENCY (GHz)
N=1
-2
-1
0
1
01234567
OUTPUT POWER (dBm)
INPUT FREQUENCY (GHz)
N=2
N=1
N=3
N=4
N=5
-10
-8
-6
-4
-2
0
01234567
OUTPUT POWER (dBm)
INPUT FREQUENCY (GHz)
N=6
N=7
N=8
N=9
N=10
N=11
N=12
N=13
N=14
N=15
N=16
N=17
-20
-10
0
10
20
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
INPUT POWER (dBm)
INPUT FREQUENCY (GHz)
-65
-55
-45
-35
-25
-15
01234567
OUTPUT LEVEL (dBm)
INPUT FREQUENCY (GHz)
N=2
N=3
N=4 through 17
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
3
HMC705LP4 / HMC705LP4E
v04.0212
6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17)
SSB Phase Noise Performance
Fin = 6 GHz, N = 2; T = -40°C, +25°C, +85°C
SSB Phase Noise Performance
Fin = 6 GHz, N = 17; T = -40°C, +25°C, +85°C
SSB Phase Noise Performance
Fin = 6 GHz, N = 2; Vcc = 4.75V, 5V, 5.25V
SSB Phase Noise Performance
Fin = 6 GHz, N = 17; Vcc = 4.75V, 5V, 5.25V
2nd Harmonic, N = 1 through 5 2nd Harmonic, N = 6 through 17
-160
-150
-140
-130
-120
-110
102103104105106107
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
-60
-50
-40
-30
-20
-10
0
01234567
OUTPUT POWER (dBm)
INPUT FREQUENCY (GHz)
-60
-50
-40
-30
-20
-10
0
01234567
OUTPUT POWER (dBm)
INPUT FREQUENCY (GHz)
N=2
N=1
N=3
N=4
N=5
-160
-150
-140
-130
-120
-110
102103104105106107
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
-160
-150
-140
-130
-120
-110
102103104105106107
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
-40C
-160
-150
-140
-130
-120
-110
102103104105106107
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
-40C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
4
HMC705LP4 / HMC705LP4E
v04.0212
6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17)
3rd Harmonic, N = 1 through 5 3rd Harmonic, N = 6 through 17
4th Harmonic, N = 1 through 5 4th Harmonic, N = 6 through 17
5th Harmonic, N = 1 through 5 5th Harmonic, N = 6 through 17
-60
-50
-40
-30
-20
-10
0
01234567
OUTPUT POWER (dBm)
INPUT FREQUENCY (GHz)
N=2 N=1
N=3
N=4
N=5
-60
-50
-40
-30
-20
-10
0
01234567
OUTPUT POWER (dBm)
INPUT FREQUENCY (GHz)
N=16
N=17
N=6 through15
-60
-50
-40
-30
-20
-10
0
01234567
OUTPUT POWER (dBm)
INPUT FREQUENCY (GHz)
N=6
N=6,7,8,9,10,11,12,13,14,15,16,17
-60
-50
-40
-30
-20
-10
0
01234567
OUTPUT POWER (dBm)
INPUT FREQUENCY (GHz)
N=8 N=7
N=6 through 17
-60
-50
-40
-30
-20
-10
0
01234567
OUTPUT POWER (dBm)
INPUT FREQUENCY (GHz)
N=2
N=1
N=3
N=4
N=5
-60
-50
-40
-30
-20
-10
0
01234567
OUTPUT POWER (dBm)
INPUT FREQUENCY (GHz)
N=2
N=1
N=3
N=4
N=5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
5
HMC705LP4 / HMC705LP4E
v04.0212
6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17)
Output Voltage Waveform, Fin = 750 MHz,
N = 3, Pin = 0 dBm, T= 25 °C
Output Voltage Waveform, Fin = 500 MHz,
N = 2, Pin = 0 dBm, T= 25 °C
Output Voltage Waveform, Fin = 2500 MHz,
N = 10, Pin = 0 dBm, T= 25 °C
Note:
[1] Peak to peak amplitude does not change relative to N.
[2] Pulse duty cycle changes relative to N.
-500
-400
-300
-200
-100
0
100
200
32 33 34 35 36 37 38
AMPLITUDE (mV)
TIME (ns)
-200
-100
0
100
200
300
400
26 27 28 29 30 31 32 33
AMPLITUDE (mV)
TIME (ns)
-300
-200
-100
0
100
200
300
25 26 27 28 29 30 31
AMPLITUDE (mV)
TIME (ns)
Output Voltage Waveform, Fin = 4250 MHz,
N = 17, Pin = 0 dBm, T= 25 °C
-500
-400
-300
-200
-100
0
100
25 26 27 28 29 30
AMPLITUDE (mV)
TIME (ns)
NOutput Duty Cycle (%)
1Input
250
3 - 17 [ 1 - (2/N) ] x 100
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
6
HMC705LP4 / HMC705LP4E
v04.0212
6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17)
Absolute Maximum Ratings
RF Input (Vcc= +5V) +13 dBm
Supply Voltage (Vcc) +5.5V
Logic Inputs -0.5V to (0.5V + Vcc)
Junction Temperature (Tc) 135 °C
Continuous Pdiss (T = 85 °C)
(derate 49 mW/° C above 85 °C) 2.4 W
Thermal Resistance
(Junction to ground paddle) 20.5 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
Typical Supply Current vs. Vcc
Vcc (V) Icc (mA)
4.75 180
5.00 190
5.25 210
Note: HMC705LP4E will work over full voltage range above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC705LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H705
XXXX
HMC705LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H705
XXXX
[1] Max peak reow temperature of 235 °C
[2] Max peak reow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
PCB LAND PATTERN.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
7
HMC705LP4 / HMC705LP4E
v04.0212
6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17)
Pin Description
Pin Number Function Description Interface Schematic
1 - 6, 8, 18 N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
7, 20 - 24
DIV1, S0
N0 - N2
BYP
PFD INVERT function
CMOS compatible input control bit
Logic “LOW” = NORMAL
Logic “HIGH” = INVERT
9, 19 Vcc1, Vcc2 Supply Voltage
10, 13, 14,
17 GND These pins and package bottom
must be connected to RF DC ground.
11 NFIN (These pins are AC coupled and must be DC Blocked externally.)
Frequency Input
Frequency Input Complement
12 FIN
15 NFout Frequency, output complement
16 Fout Frequency output
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
8
HMC705LP4 / HMC705LP4E
v04.0212
6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17)
HMC705LP4(E) Programming Truth Table
Division
Ratio N S0 N0 N1 N2 DIV 1 BYP
1000001
2000010
3100010
4010000
5110000
6001000
7101000
8011000
9111000
10 000100
11 100100
12 010100
13 110100
14 001100
15 101100
16 011100
17 111100
0 = Logic Low
1 = Logic High
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
9
HMC705LP4 / HMC705LP4E
v04.0212
6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17)
Evaluation PCB Circuit
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
10
HMC705LP4 / HMC705LP4E
v04.0212
6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17)
Evaluation PCB
List of Materials for
Evaluation PCB 116993 [1]
Item Description
J1 - J4 PCB Mount SMA Connector
J5 14 Position Header
J6 4 Position Header
R1 10K Ohm Resistor Network, Bissel SMD
C1, C2 1000 pF Capacitor, 0402 Pkg.
C3 - C5 100 pF Capacitor, 0402 Pkg.
C6 - C8 1000 pF Capacitor, 0603 Pkg.
C9 4.7 F Tantalum Capacitor, Case A
U1 HMC705LP4(E) Programmable Divider
PCB [2] 116991 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the application should use
RF circuit design techniques. Signal lines should have
50 Ohm impedance while the package ground leads
and backside ground paddle should be connected
directly to the ground plane similar to that shown. A
sufficient number of via holes should be used to con-
nect the top and bottom ground planes. The evalua-
tion circuit board shown is available from Hittite upon
request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
11
HMC705LP4 / HMC705LP4E
v04.0212
6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17)
Typical PLL Application Circuit using HMC705LP4(E)
PLL application shown for Divide-by-10. Contact HMC to discuss your specic application.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
12
HMC705LP4 / HMC705LP4E
v04.0212
6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17)
CMOS/TTL Input Characteristics
Maximum Input Logic “0” Voltage (VIL MAXIMUM) = 1.1V @ 1 µA.
Minimum Input Logic “1” Voltage (VIH MINIMUM) = 1.8V @ 50 µA.
Input IV characteristics for the logic inputs (S0, N0 - N2, DIVI, BYP) are shown below:
-0.1
0
0.1
0.2
0.3
0.4
012345
Input Current (mA)
Input Voltage (V)
VIL MAX VIH MIN
Typical Application Showing Spurious Performance
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D