BAS19-G, BAS20-G, BAS21-G www.vishay.com Vishay Semiconductors Small Signal Switching Diodes, High Voltage FEATURES * Silicon epitaxial planar diode 3 * Fast switching diode in case SOT-23, especially suited for automatic insertion * General purpose switching applications * High conductance 1 2 * AEC-Q101 qualified * Base P/N-G3 - green, commercial grade * Material categorization: For definitions of compliance www.vishay.com/doc?99912 MECHANICAL DATA Case: SOT-23 Weight: approx. 8.1 mg Packaging codes/options: 18/10K per 13" reel (8 mm tape), 10K/box 08/3K per 7" reel (8 mm tape), 15K/box please see PARTS TABLE PART TYPE DIFFERENTIATION ORDERING CODE TYPE MARKING INTERNAL CONSTRUCTION REMARKS BAS19-G VR = 100 V BAS19-G3-08 or BAS19-G3-18 A8G Single diode Tape and reel BAS20-G VR = 150 V BAS20-G3-08 or BAS20-G3-18 A9G Single diode Tape and reel BAS21-G VR = 200 V BAS21-G3-08 or BAS21-G3-18 AAG Single diode Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION Continuous reverse voltage Repetitive peak reverse voltage Non-repetitive peak forward current t = 1 s Non-repetitive peak forward surge current t=1s Maximum average forward rectified current (1) (av. over any 20 ms period) PART SYMBOL VALUE UNIT BAS19-G VR 100 V BAS20-G VR 150 V BAS21-G VR 200 V BAS19-G VRRM 120 V BAS20-G VRRM 200 V BAS21-G VRRM 250 V IFSM 2.5 0.5 A IF(AV) 200 mA IF 200 mA Repetitive peak forward current IFRM 625 mA Power dissipation (2) Ptot 250 mW DC forward current (2) Notes (1) Measured under pulse conditions; pulse time = t 0.3 ms p (2) Device on fiberglass substrate, see layout on next page Rev. 1.1, 15-May-13 Document Number: 83390 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS19-G, BAS20-G, BAS21-G www.vishay.com Vishay Semiconductors THERMAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT RthJA 430 K/W Tj 150 C Storage temperature range Tstg - 65 to + 150 C Operating temperature range Top - 55 to + 150 C Thermal resistance junction to ambient air (1) Junction temperature Note (1) Device on fiberglass substrate, see layout drawing below ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION Forward voltage Leakage current MAX. UNIT IF = 100 mA PART VF 1.0 V IF = 200 mA VF 1.25 TYP. V BAS19-G IR 100 nA VR = 150 V BAS20-G IR 100 nA VR = 200 V BAS21-G IR 100 nA IR 100 A IF = 10 mA rf VR = 0, f = 1 MHz CD 5 pF IF = IR = 30 mA, RL = 100 , iR = 3 mA trr 50 ns Diode capacitance Reverse recovery time MIN. VR = 100 V VR = VRmax., TJ = 150 C Dynamic forward resistance SYMBOL 5 Layout for RthJA test Thickness: Fiberglass 1.5 mm (0.059 in.) Copper leads 0.3 mm (0.012 in.) 7.5 (0.3) 3 (0.12) 1 (0.4) 2 (0.8) 1 (0.4) 12 (0.47) 15 (0.59) 2 (0.8) 0.8 (0.03) 5 (0.2) 1.5 (0.06) 5.1 (0.2) Rev. 1.1, 15-May-13 17451 Document Number: 83390 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS19-G, BAS20-G, BAS21-G www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): SOT-23 1.15 (0.045) 0 t o8 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.1 (0.004) max. 0.550 ref. (0.022 ref.) 0.9 (0.035) 3.1 (0.122) 2.8 (0.110) 0.5 (0.020) 0.45 (0.018) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) Foot print recommendation: 1 (0.039) 0.9 (0.035) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Rev. 1.1, 15-May-13 0.9 (0.035) 0.7 (0.028) 2 (0.079) 1.43 (0.056) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 1 (0.039) 0.9 (0.035) 0.95 (0.037) 0.95 (0.037) Document Number: 83390 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: BAS19-V-GS08 BAS21-V-GS08 BAS20-V-GS08 BAS19-V-GS18 BAS20-V-GS18 BAS21-V-GS18 BAS21-G3-08 BAS21-G3-18 BAS20-G3-08 BAS20-G3-18 BAS19-G3-18 BAS19-G3-08