AEP SMB series connectors meet or exceed MIL-PRF-39012 performance requirements, offering good electrical performance to 10 GHz. Their snap-on mating makes them ideal for use in confined areas where the use of wrenches is not practical. AEP SMC series connectors offer the same low cost and small size as SMB series, but their screw-on mating provides extra mating security. Frequency range: DC-10 GHz. SMB and SMC connectors with a MIL-PRF-39012 QPL version available have the appropriate slash sheet noted. See pages 3 and 4 for a complete listing of SMB and SMC QPL connectors. AEP SLB series connectors are similar to SMB series, but have slide-on mating for use in multiple mounting or rack-and-panel applications. SLB plugs will mate with SMB jacks. Standard cables for use with these connectors are shown at the bottom of the appropriate product pages. A complete listing of cable groups is on page 145. All the items shown are available with either gold or nickel plated bodies; part numbers for each finish are shown in the product section. The index listing for each connector shows the appropriate cable assembly instruction. Assembly instructions start on page 148. Factory-built cable assemblies using these connectors are available from AEP. AEP New Haven, CT 203/776-2813 59 WV _ INTERFACE DIMENSIONS MIL-STD-348 REFERENCE PLANE REFERENCE PLANE .141 MIN BODY & INSULATOR 131 141 062 47 064 MAX .065 MIN .052 019 MIN Ga7 DIA I 146 DIA 081 DIA 4 MAX MAX 082 : 007 MAX ooo Mint IN 007 CONTACT 037 CONTACT & INSULATOR 027 002 .007 MIN INSULATOR 037 p06 FAD g te (7 005 RAD MAX | _v ,006 Ot 010 .015 GROOVE DETAIL SLB dimensions identical to above except without detent. we Go INTERFACE DIMENSIONS MIL-STD-348 REFERENCE PLANE 190-32 UNF - 2A \ Lg REFERENCE PLANE 539 min 4 AK 190-32 UNF - 28 \ MIN 123 Faq .019 133 2019 [" G27 DIA _ | + 4 082 DIA 146 DIA 081 DIA F_MIN MAX MAX 7 F > .147 DIA | H.000 MIN MIN cel 024 MIN >| be-084 MAX .134 MIN ~ CONTACT & INSULATOR .134 MAX CONTACT & INSULATOR AEP New Haven, CT 203/776-2813 60SPECIFICATIONS Materials: Body components, male contacts: Brass per ASTM B16, alloy 360, 1/2 hard Female contact: Beryllium copper per ASTM B196, condition HT. Insulators: Teflon TFE per ASTM-D-1710. Finish: Center contacts: Gold plated per MIL-G-45204. All other parts finished to meet MIL-PRF-39012 corrosion requirements. Electrical: Impedance: 50 ohms. Frequency range: SMC: DC-10 GHz. SMB, SLB: DC-4 GHz. ~ Voltage Rating: RG178: 250 VRMS, sea level. RG316: 335 VRMS, sea level. Insulation resistance: 1000 megohms min. VSWR: SMB, SLB straight connector: RG178: 1.30 + (.04xF[GHz]). RG316: 1.25 + (.04xF[GHz]) SMB, SLB right angle: RG178: 1.45 + (.06xF[GHz]) RG316: 1.35 + (.04xF[GHz]) SMC straight connector: RG178: 1.25 + (.04xF[GHz]}) RG316: 1.20 + (.04xF[GHz]) SMC right angle: RG178: 1.40 + (.06xF[GHz]) RG316: 1.30 + (.04xF[GHz]) Contact resistance: Straight, 6 millionms max initial, 8 milliohms max after environment. Right angle, 12 millionms max initial, 16 millionms max after environment. Dielectric Withstanding Voltage (sea level): RG178: 750 VRMS. RG316: 1000 VRMS. MIL-PRF-39012 Corona level @ 70,000 ft.: RG178: 185 VRMS. RG316: 250 VRMS. RF highpot @ 5MHz: RG178: 500 VRMS. RG316: 700 VRMS. RF leakage: SMB, SLB: -55 Db min, 2-3 GHz. SMC: -60 Db min, 2-3 GHz. Insertion loss: SMB, SLB @ 1.5 GHz: Straight .30 Db max. Right angle .60 Db max. SMC @ 4 GHz: Straight .25 Db max. Right angle .50 Db max. | Mechanical: Force to engage: SMB, 14 pounds max, SLB 6 pounds max. Mating torque: SMC, 35-50inch ounces. Coupling nut pulloff resistance: SMC, 35 pounds min. Contact retention (captive contact connectors): 4 pounds min. axial force. Durability: 500 mating cycles. Environmental: (per MIL-STD-202) Temperature rating: -65 C to + 165 C. Corrosion: Method 101, condition B, 5% salt solution. Vibration: Method 204, SMB, condition B. SMC, condition D. Mechanical shock: Method 213, SMB, condition B. SMC, condition C. Thermal shock: method 107, condition B. AEP New Haven, CT 203/776-2813 61Cable Attachment Methods All connectors in these series have captivated contacts which are soldered to the cable center conductor. All the cable attachment methods shown have gripping force greater than the breaking strength of the cable. 7 my ci -+ $5 AEs FE REKL_G A Yee P STS F Asso AN, 2S e2.0+ Sa See a eovvuvescecercssas. Clamp Type For Flexible Cable These connectors can be assembled without special tooling, and are field replaceable. They provide metal-to-metal clamping of the cable braid. Crimp Type For Flexible Cable Crimping the cable braid is the most reliable and repeatable method of cable assembly, and provides support for the cable during flexure. AEP crimp type connectors are assembled quickly and easily using readily-available commercial or MIL crimp tools. Solder-Clamp For Semi-Rigid Cable This method allows retrimming of the cable dielectric, if necessary, during assembly. Connectors can be repositioned relative to the cable after assembly by loosening the clamp nut. Solder-clamp connectors are field replaceable without special tools. 62 AEP New Haven, CT 203/776-2813CABLE PLUGS STRAIGHT AND RIGHT ANGLE Straight Female Cable Plug Clamp type for flexible cable: 2002-1551-0XX (Gold plated) 2002-7551-0XX (Nickel plated) Solder-clamp for semi-rigid cable: 2002-1541-0XX (Gold plated) 2002-7541-0XX (Nickel plated) QPL version available (M3901 2/67) Straight Female Cable Plug Crimp type for flexible cable: 2002-1571-0XX (Gold plated) 2002-7571-OXX (Nickel plated) QPL version available (M39012/67) ~ 1.02 7132 HEX Right Angle - Female Cable Plug Clamp type for flexible cable: 2005-1551-0XX (Gold plated) 2005-7551-0XX (Nickel plated) Solder-clamp for semi-rigid cable: 2005-1541-O0XX (Gold plated) 2005-7541-0XX (Nickel plated) QPL version available (M3901 2/69) kw 52 I<. .391 1 468 7/32 HEX e v _; 09 Right Angle Female Cable Plug Crimp type for flexible cable: 2105-1521-OXX (Gold plated) 2105-7521-OXX (Nickel plated) QPL version available (M3901 2/69) bh 52 /<..39 1 I 500 375 Substitute the appropriate cable group for XX: 02 | RG178, RG196, M17/93, M17/169 09 | .141" semi-rigid, RG402, M17/130 03 | RG174, RG179, RG316, M17/113, 10 | .085" semi-rigid, RG405, M17/133 M17/119, M17/172, M17/173 19 | RG174DS, RG316DS, 05 | RG178DS, RG196DS M17/152, Times RD316 AEP New Haven, CT 203/776-2813 63WS 0 BULKHEAD MOUNTED CABLE PLUGS Bulkhead Mounted <_ 63 Straight Cable Plug Clamp type for flexible cable: we .515 2028-1551-0XX (Gold plated) D" FLAT 2028-7551-0XX (Nickel plated) i Solder-clamp for semi-rigid: 2028-1541-0XX (Gold plated) 2028-7541-0XX (Nickel plated) t yf \ / 7/32 HEX 3/8 HEX 11/32 HEX 9/32 - 40 NEF - 2A Bulkhead Mounted Straight Cable Plug Crimp type for flexible cable: 2028-1571-OXX (Gold plated) 2028-7571-0XX (Nickel plated) je 1.00 he 515 D FLAT r 1375 yf 7132 HEX 11/32 HEX 3/8 HEX 9/32 - 40 NEF - 2A Substitute the appropriate cable group for XX: 02 | RG178, RG196, M17/93, M17/169 09 | .141" semi-rigid, RG402, M17/130 03 | RG174, RG179, RG316, M17/113, 10 | .085" semi-rigid, RG405, M17/133 M17/119, M17/172, M17/173 19 | RG174DS, RG316DS, 05 | RG178DS, RG196DS M17/152, Times RD316 Designed for use with .093 max thick panel AEP New Haven, CT 2 76-281 64 03/776-2813CABLE JACKS 0 a OF Straight Male Cable Jack Clamp type for flexible cable: 2001-1551-0XX (Gold plated) 2001-7551-0XX (Nickel plated) Solder-clamp for semi-rigid cable: 2001-1541-OXX (Gold plated) 2001-7541-0XX (Nickel plated) QPL version available (M3901 2/68) Straight Male Cable Jack Crimp type for flexible cable: 2001-1571-0XX (Gold plated) 2001-7571-OXX (Nickel plated) QPL version available (M39012/68) _ Right Angle Male Cable Jack Clamp type for flexible cable: 2041-1551-0XX (Gold plated) 2041-7551-OXX (Nickel plated) Solder-clamp for semi-rigid cable: 2041-1541-O0XX (Gold plated) 2041-7541-0XX (Nickel plated) Right Angle Male Cable Jack Crimp type for flexible cable: 2141-1521-0XX (Gold plated) 2141-7521-OXX (Nickel plated) Substitute the appropriate cable group for XX: 02 | RG178, RG196, M17/93, M17/169 09 | .141" semi-rigid, RG402, M17/130 03 | RG174, RG179, RG316, M17/113, 10 | .085" semi-rigid, RG405, M17/133 M17/119, M17/172, M17/173 19 | RG174DS, RG316DS, 05 | RG178DS, RG196DS M17/152, Times RD316 AEP New Haven, CT 203/776-2813 650 BULKHEAD JACKS OF Straight Male < 7 | Bulkhead Cable Jack pe Clamp type for flexible cable: @ G 2003-1551-0XX (Gold plated) r | - 2003-7551-0XX (Nickel plated) | 4 Ali mn # y\4 Solder-clamp for semi-rigid cable: #10-32 UNF 7132 HEX 2003-1541-0XX (Gold plated) 1/4 HEX 2003-7541-0XX (Nickel plated) QPL version available (M3901 2/70) - 1.12 Straight Male ro Bulkhead Cable Jack te he Crimp type for flexible cable: 2003-1571-0XX (Gold plated) 2003-7571-0XX (Nickel plated) QPL version available (M3901 2/70) #10-32 UNF 1/4 HEX 71392 HEX se Bulkhead Mounted rm Right Angle Male Cable Jack Clamp type for flexible cable: - 2006-1551-0XX (Gold plated) , L 2006-7551-0XX (Nickel plated) #10-32 UNF 4 | , 114 HEX yea 470 Solder-clamp for semi-rigid cable: | 2006-1541-0XX (Gold plated) 7/32 HEX 2006-7541-0XX (Nickel plated) Lk __y : eye ae Bulkhead Mounted Right Angle Male Cable Jack DY FLAT NA Crimp type for flexible cable: EM ! 2106-1521-0XX (Gold plated) US 63 2106-7521-0XX (Nickel plated) yy rose 70 OTT TF a 1/4 HEX re Substitute the appropriate cable group for XX: 02 | RG178, RG196, M17/93, M17/169 09 | .141" semi-rigid, RG402, M17/130 03 | RG174, RG179, RG316, M17/113, 10 | .085" semi-rigid, RG405, M17/133 M17/119, M17/172, M17/173 19 | RG174DS, RG316DS, 05 | RG178DS, RG196DS M17/152, Times RD316 Designed for use with .093 max thick panel See page 143 for D flat location in relation to hex. AEP New Haven, CT 66 203/776-2813BULKHEAD JACK RECEPTACLES VA 0 Straight Male Bulkhead Jack Receptacle t 61 > 1 426 L.140 Solder pot contact e Rear mount = 062 DIA Q@ 7 2004-1511-000 (Gold plated) = _ p08 DIA 2004-7511-000 (Nickel plated) 7 S45 QPL version available (M39012/71) 4 fF #10-32 UNF 1/4 HEX Straight Male Bulkhead Jack Receptacle e Solder pot contact Front mount 2019-1511-000 (Gold plated) 2019-751 1-000 (Nickel plated) QPL version available (M3901 2/71) 062 DIA | [ .035 DIA Tt #10-32 UNF Straight Male ose +t fe 28 c Bulkhead Jack Receptacle | e Solder pot contact 2 hs * Recessed front mount , Ty DIA 2014-1511-000 (Gold plated) St - tH es 2014-7511-000 (Nickel plated) & | .035 DIA i ye 3/8-32 NEF - 2A 7116 HEX 7H16 HEX Right Angle Male . 3 Bulkhead Jack Receptacle 88 e Solder pot contact 225 Front mount - + .300 175 6 : .200 2012-1511-000 (Gold plated) 2012-7511-000 (Nickel plated) 4 1/4 HEX Z 410-32 UNF me in __ .062 DIA .035 DIA Designed for use with .093 max thick panel AEP New Haven, CT oe ; 203/776-2813 See page 143 for D flat location in relation to hex. 670 BULKHEAD PLUG RECEPTACLES Straight Female Bulkhead Plug Receptacle Solder pot contact Front mount 2017-1511-000 (Gold plated) 2017-7511-000 (Nickel plated) Gg 7 5 2 Ss SS 3/8 HEX 5/16-32 NEF - 2A Straight Female Bulkhead Plug Receptacle Solder pot contact Rear mount 2048-1511-000 (Gold plated) 2048-7511-000 (Nickel plated) 1/4 HEX #10-32 UNF 2A Right Angle Female Bulkhead Plug Receptacle Solder pot contact * Front mount 2097-1511-000 (Gold plated) 2097-7511-000 (Nickel plated) Designed for use with .093 max thick panel 68 AEP New Haven, CT 203/776-2813P.C. BOARD RECEPTACLES oN 0 2009-1511-000 (Gold plated) 2009-7511-000 (Nickel plated) Straight Male Jack Receptacle QPL version available 250 (M39012/95) 450 fh SO eo 155 vey | ::5 T_T LL .040 SQ (TYP) 038 > | im 2009-1511-050 (Gold plated) 2009-7511-050 (Nickel plated) 450 m~ 250 02 m4 |_..135 i* $o. ~ REF. 00 295 > [cry] 4 cH] P_.106 DIA. +H <p FH 060 sa. _ ave) a 040 SQ. .038 DIA. (TYP) Right Angle Male Jack Receptacle A B Cc D 43 15 50 38 _ .250 2010-1511-000 (Gold plated) _| 2010-7511-000 _(Nickel plated) | A B Cc D 50 | .215 | 56 | .437 2010-1511-002 (Gold plated) 2010-7511-002 _(Nickel plated) QPL version available (M39012/96) >| B pi.155 lr arvey c | _ + et S D | qe: Br .038 DIA |. 040 Ss (TYP) Straight Female Plug Receptacle 2025-1511-000 (Gold plated) 2025-751 1-000 (Nickel plated) <= 47 ~e SQ y r+ .316 155 .200 (Typ) | i mM .038 iz Right Angle Female Plug Receptacle t+. .430 _ h<.275 _> ~ 150 4 oo a a nN 6 2042-1511-000 (Gold plated) 2042-7511-000 (Nickel plated) AEP New Haven, CT 203/776-2813 69A 0 P.C. BOARD AND PANEL RECEPTACLES | eso << Sq > Bulkhead Mounted e485 155 traight Male Jack 440 Paryey | P.C. Board Receptacle 4 4 4 ee qf 2109-1511-000 (Gold plated) 7 (>) r 2109-7511-000 (Nickel plated) a | .038 DIA I | 040 SQ 1/4 HEX (TYP) }~ 430 _} 25 3 40 so Bulkhead Mounted |_ iss vp) 20 Right Angle Male Jack L La" i P.C,. Board Receptacle _ 2110-1511-000 (Gold plated) .038 2110-7511-000 (Nickel plated) DIA #10-32 UNF 275 + 1/4 HEX 42: #10-32 UNF Straight Male 58 > Panel Receptacle pe S78 200 A so. B_ | Cdia. 7 500 .340 102 ty 2486-1511-000 _(Gold plated) Says ===> 4 2486-7511-000 (Nickel plated) = 036 DIA A sq. B C dia. aN 375 | .232 | .093 2484-1511-000 _ (Gold plated) 2484-7511-000 _ (Nickel plated) Right Angle Male Panel Receptacle A sq. B C dia. .500 .340 102 2490-1511-000 (Gold plated) 2490-7511-000 (Nickel plated) A sq. B C dia. 375 232 .093 2488-1511-000 (Gold plated) 2488-7511-000 (Nickel plated) MIN C" DIA (4 PLACES) e AEP New Haven, CT 70 203/776-2813STRIPLINE RECEPTACLES Al q 0 Straight Male Top Launch Jack Non-captive contact Dim. A Part number: .031 .063 125 2029-1211-001 2029-7211-001 2029-1211-002 2029-7211-002 2029-1211-003 2029-7211-003 (Gold plated) (Nickel plated) (Gold plated) (Nickel plated) (Gold plated) (Nickel plated) 305 243 > | f LI .062 DIA 010 on #1-72 UNF - 2B THD (7 PLACES) Right Angle Male Top Launch Jack e Removable rear contact Dim. A Part number: .031 .063 125 2092-1511-001 2092-7511-001 2092-1511-002 2092-7511-002 2092-1511-003 2092-7511-003 (Gold plated) (Nickel plated) (Gold plated) (Nickel plated) (Gold plated) (Nickel plated) 570 #1-72 UNF - 2B (8 PLACES) EQUALLY SPACED AEP New Haven, CT 203/776-2813 71ACA 0 ADAPTERS WITHIN SERIES Straight Male Jack To Jack Adapter e Connects two plugs 5213-1501-000 (Gold plated) 5213-7501-000 (Nickel plated) i on o Bulkhead Mounted Straight Male Jack To Jack Adapter e Connects two plugs e For .093 max. panel 5222-1501-000 (Gold plated) 5222-7501-000 (Nickel plated) Straight Female Plug To Plug Adapter e Connects two jacks 5216-1501-000 (Gold plated) 5216-7501-000 (Nickel plated) #5 375 (TYP) Tee Adapter (Unmatched Power Divider) Jack To Plug To Jack Connects two plugs and one jack 5215-1501-000 (Gold plated) 5215-7501-000 (Nickel plated) 72 AEP New Haven, CT 203/776-28130 ADAPTERS WITHIN SERIES on RESISTIVE TERMINATIONS Tee Adapter < 5 (Unmatched Power Divider) ve | 25 Jack To Jack To Jack e Connects three plugs 5207-1501-000 (Gold plated) 5207-7501-000 (Nickel plated) Tee Adapter - 78 (Unmatched Power Divider) Plug To Plug To Plug * Connects three jacks 5208-1501-000 (Gold plated) 5208-7501-000 (Nickel plated) Y Female Plug Resistive Termination <____.84 MAX (Dummy load) Standard resistor: 51 ohm, 1/2 watt, = a) F ~ 5% tolerance _ _ 4 fk : 2036-1511-051 (Gold plated) aS es 2036-7511-051 (Nickel plated) . . . 7/32 HEX Available with other resistances. Male Jack Resistive Termination 84 MAX (Dummy load) .280 7 Standard resistor: a 51 ohm, 1/2 watt, 5% tolerance 2037-1511-051 (Gold plated) 2037-7511-051 (Nickel plated) Available with other resistances 7132 HEX AEP New Haven, CT 203/776-2813 73= STRAIGHT AND RIGHT ANGLE po . 7_aPNA 7132 7132 HEX HEX Straight Female Cable Plug Clamp type for flexible cable: 1002-1551-0XX (Gold plated) 1002-7551-0XX (Nickel plated) Solder-clamp for semi-rigid cable: 1002-1541-0XX (Gold plated) 1002-7541-0XX (Nickel plated) QPL version available (M39012/73) 375 > 1.05 > 7/32 HEX Straight Female Cable Plug Crimp type for flexible cable: 1002-1571-OXX (Gold plated) 1002-7571-0XX (Nickel plated) QPL version available (M3901 2/73) WS ned = Right Angle Female Cable Plug Clamp type for flexible cable: 1005-1551-0XX (Gold plated) 1005-7551-0XX (Nickel plated) Solder-clamp for sem-rigid cable: 1005-1541-O0XX (Gold plated) 1005-7541-0XX (Nickel plated) QPL version available (M3901 2/75) Right Angle Female Cable Plug Crimp type for flexible cable: 1105-1521-O0XX (Gold plated) 1105-7521-OXX (Nickel plated) QPL version available (M39012/75) Substitute the appropriate cable group for XX: 02 | RG178, RG196, M17/93, M17/169 09 | .141" semi-rigid, RG402, M17/130 03 | RG174, RG179, RG316, M17/113, M17/119, M17/172, M17/173 10 | 085" semi-rigid, RG405, M17/133 19 | RG174DS, RG316DSs, 05 | RG178DS, RG196DS M17/152, Times RD316 74 AEP New Haven, CT 203/776-2813CABLE JACKS @ inn (C Straight Male Cable Jack Clamp type for flexible cable: 1001-1551-OXX (Gold plated) QPL version 1001-7551-OXX (Nickel plated) available (M3901 2/74) Solder-clamp for semi-rigid cable: 1001-1541-O0XX (Gold plated) 1001-7541-OXX (Nickel plated) Straight Male Cable Jack < 1.02 > Crimp type for flexible cable: 1001-1571-OXX (Gold plated) 1001-7571-0XX (Nickel plated) QPL version available (M39012/74) 7132 HEX Right Angle Male Cable Jack <__ 55 _> Clamp type for flexible cable: 1041-1551-0XX (Gold plated) ht 265 7 1041-7551-OXX (Nickel plated) 1041-1541-0XX (Gold plated) 3 1041-7541-0XX (Nickel plated) l" Solder-clamp for semi-rigid cable: an + | | Right Angle Male Cable Jack 55 > Crimp type for flexible cable: 2654 1141-1521-OXX (Gold plated) 1141-7521-OXX (Nickel plated) Substitute the appropriate cable group for XX: 02 | RG178, RG196, M17/93, M17/169 09 | .141" semi-rigid, RG402, M17/130 03 | RG174, RG179, RG316, M17/113, 10 .085" semi-rigid, RG405, M17/133 M17/119, M17/172, M17/173 19 RG174DS, RG316DS, 05 | RG178DS, RGi96DS | M17/152, Times RD316 AEP New Haven, CT 203/776-2813 75Q inn V )) C BULKHEAD JACKS P-.425 > A - LO a a Mest &b ue 1/4 _/, #10-32 UNF mT 7132 HEX Straight Male Bulkhead Cable Jack Clamp type for flexible cable: 1003-1551-0XX (Gold plated) 1003-7551-0XX (Nickel plated) Solder-clamp for semi-rigid cable: 1003-1541-OXX (Gold plated) 1003-7541-0XX (Nickel plated) QPL version available (M39012/76) je 1.12 ht# 425 | ue _ 375 he he UNF 7/32 HEX Straight Male Bulkhead Cable Jack Crimp type for flexible cable: 1003-1571-OXX (Gold plated) 1003-7571-0XX (Nickel plated) QPL version available (M39012/76) Bulkhead Mounted DY FLAT I 495 Right Angle Male Cable Jack = Clamp type for flexible cable: 4 + 1006-1551-0XX (Gold plated) . 1006-7551-0XX (Nickel plated) : 59 #10-32 UNF i) | Solder-clamp for semi-rigid cable: 1/4 HEX | | 470 1006-1541-0XX (Gold plated) t | 1006-7541-0XX (Nickel plated) 7132 Hex" ; go Bulkhead Mounted HOU LAT NS 425 Right Angle Male Cable Jack Li E | : . P= | E Crimp type for flexible cable: 2 Hh | T y 1106-1521-0XX (Gold plated) 5 43 63 1106-7521-OXX (Nickel plated) %, fo fiw Jif db #10-32 UNF 1/4 HEX | | 375 Substitute the appropriate cable group for XX: 02 , RG178, RG196, M17/93, M17/169 09 | 141" semi-rigid, RG402, M17/130 03 | RG174, RG179, RG316, M17/113, M17/119, M17/172, M17/173 10 _ .085" semi-rigid, RG405, M17/133 19 RG174DS, RG316DS, 05 | RG178DS, RG196DS M17/152, Times RD316 Designed for use with .093 max thick panel See page 143 for D flat location in relation to hex. 76 AEP New Haven, CT 203/776-2813RECEPTACLES Q nin BULKHEAD MOUNTED Straight Male Bulkhead Jack Receptacle e Solder pot contact e Rear mount 1004-151 1-000 (Gold plated) 1004-751 1-000 (Nickel plated) QPL version available (M39012/77) pee DIA > .035 DIA #10-32 UNF 1/4 HEX Straight Male Bulkhead Jack Receptacle e Solder pot contact Front mount wre 098 DIA in SS 1019-1511-000 (Gold plated) | i pT 1019-7511-000 (Nickel plated) 1h 4 QPL version available (M3901 2/77) .062 DIA Straight Female Bulkhead Plug Receptacle * Solder pot contact 34 | e Front mount 1017-1511-000 (Gold plated) 1017-7511-000 (Nickel plated) _ _y p 035 DIA fi % 062 DIA #10-32 UNF 1/4 HEX Right Angle Male Bulkhead Jack Receptacle <_ 55 > Solder pot contact Front mount P+_ -265 a 1012-1511-000 (Gold plated) 1012-7511-000 (Nickel plated) 1/4 HEX #10-32 UNF .035 DIA Designed for use with .093 max thick panel AEP New Haven, CT 203/776-2813 See page 143 for D flat location in relation to hex. 7/P.C. BOARD RECEPTACLES *_ .450 pt .295 m| .155 .250 j_ SQ >| re Ff oe gaa .038 DIA .040 sQ (TYP) Straight Male Jack Receptacle 1009-1511-000 (Gold plated) 1009-7511-000 (Nickel plated) .250 < SQ | .200 live) a .038 DIA Irs 7 (TYP) 1 .040 SQ Right Angle Male Jack Receptacle A B Cc D 43 | 15 | 55 | .42 1010-1511-000 (Gold plated) 1010-7511-000 (Nickel plated) A B Cc D 50 | .215 | .55 .42 1010-1511-001 (Gold plated) 1010-7511-001 (Nickel plated) .250 Straight Female }< 50 = SO Plug Receptacle < .35 155 .200 1025-1511-000 (Gold plated) Gia 40 1025-751 1-000 (Nickel plated) i Het (TYP) rc 4 = | & ot 7132 HEX .038 DIA 430 0 Right Angle Female rt 200 040 Plug Receptacle |_ (TYP) sa 7132 HEX qe ea .038 Ee. DIA ee Hh (TYP) 1042-1511-000 (Gold plated) 1042-7511-000 (Nickel plated) AEP New Haven, CT 203/776-2813P.C. BOARD AND PANEL RECEPTACLES Q ave V/ ) (eC me orn eS OF TL-C Bulkhead Mounted Straight Male Jack P.C. Board Receptacle 1109-1511-000 (Gold plated) 1109-7511-000 (Nickel plated) .250 * sa a 640 > + .440 .155 .200 | rT (TYP) U 14 HEX .038 DIA #10-32 UNF Bulkhead Mounted Right Angle Male Jack P.C. Board Receptacle 1110-1511-000 (Gold plated) 1110-7511-000 (Nickel plated) l~___430 2 >| 1504 155 .200 (TYP) .038 DIA NT Ts 114 HEX al #10-32 UNF y Straight Male Panel Receptacle A sq. B C dia. .500 .340 .102 1486-1511-000 (Gold plated) 1486-7511-000 (Nickel plated) A sq. B C dia. 375 232 .093 1484-1511-000 (Gold plated) 1484-7511-000 _ (Nickel plated) | .036 DIA .024 DIA C DIA (4 PLACES) Right Angle Male Panel Receptacle A sq. B C dia. .500 .340 .102 1490-1511-000 (Gold plated) 1490-7511-000 (Nickel plated) A sq. B C dia. 375 .232 .093 1488-1511-000 (Gold plated) 1488-7511-000 (Nickel plated) ++ .65 .036 DI 036 DIA (4 PLACES) .024 DIA MIN AEP New Haven, CT 203/776-2813 79Q nn C STRIPLINE RECEPTACLES Straight Male 305 > DIA Top Launch Jack e Non-captive contact -243>| = Dim. A Part number E .036 DIA . 031 1029-1211-001 (Gold plated) mali 5 1029-7211-001 (Nickel plated) Fo 1 S 063 1029-1211-002 (Gold plated) fe oro 1029-7211-002 (Nickel plated) 4 125 1029-1211-003 (Gold plated) LS 1029-7211-003 (Nickel plated) ~ A D.B.C. #1-72 NF - 2B (7 PLACES) Right Angle Male Top Launch Jack e Removable rear contact .500 DIA 387 D.B.C. Dim. A Part number PX 031 1092-1511-001 (Gold plated) ( -9; 1092-7511-001 Nickel plated) 063 1092-1511-002 Gold plated) 1092-7511-002 (Nickel plated) = 125 1092-1511-003 (Gold plated) nT lan am 1092-7511-003 = (Nickel plated) i il #1-72 NF - 2B (8 PLACES) / EQUALLY SPACED AEP New Haven, CT 203/776-2813 80ADAPTERS WITHIN SERIES Q nn eC Straight Male Jack To Jack Adapter e Connects two plugs .69 _| 5813-1501-000 (Gold plated) 5813-7501-000 (Nickel plated) Bulkhead Mounted Straight Male 69 - Jack To Jack Adapter 20 * Connects two plugs e For .093 max. panel 5822-1501-000 (Gold plated) 5822-7501-000 (Nickel plated) #10-32 UNF 1/4 HEX BOTH ENDS Straight Female Plug To Plug Adapter 73 Connects two jacks 5816-1501-000 (Gold plated) G7 Ca ca 5816-7501-000 (Nickel plated) aS = pe VN NS XO 7/32 HEX 1/4 HEX (2 PLACES) (Unmatched Power Divider) Jack To Plug To Jack e Connects two plugs and one jack 5815-1501-000 (Gold plated) aul 5815-7501-000 (Nickel plated) Tee Adapter C 84 > | 7132 HEX AEP New Haven, CT 203/776-2813 84q nin 1 C ADAPTERS WITHIN SERIES RESISTIVE TERMINATIONS b 84 > Tee Adapter (Unmatched Power Divider) Jack To Jack To Jack Connects three plugs 5807-1501-000 (Gold plated) 5807-7501-000 (Nickel plated) 63 7132 HEX (3 PLACES) Tee Adapter (Unmatched Power Divider) Plug To Plug To Plug Connects three jacks 5808-1501-000 (Gold plated) 5808-7501-000 (Nickel plated) HEX HEX Female Plug Resistive Termination (Dummy load) Standard resistor: 51 ohm, 1/2 watt, 5% tolerance 1036-1511-051 (Gold plated) 1036-7511-051 (Nickel plated) Available with other resistances | 8 | r 310 | ] te ft 7/32 HEX Male Jack Resistive Termination (Dummy load) Standard resistor: 51 ohm, 1/2 watt, 5% tolerance 1037-1511-051 (Gold plated) 1037-7511-051 (Nickel plated) Available with other resistances B82 AEP New Haven, CT 203/776-2813CABLE PLUGS Straight Female Cable Plug Clamp type for flexible cable: 3002-1551-0XX (Gold plated) 3002-7551-0XX (Nickel plated) Solder-clamp for semi-rigid cable: 3002-1541-OXX (Gold plated) 3002-7541-0XX (Nickel plated) 7/132 HEX Straight Female Cable Plug Crimp type for flexible cable: 3002-1571-0XX (Gold plated) 3002-7571-0XX (Nickel plated) 1.02. __________ _ .375> 7132 HEX Right Angle Female Cable Plug Clamp type for flexible cable: 3005-1551-0XX (Gold plated) 3005-7551-0XX (Nickel plated) Solder-clamp for semi-rigid cable: 3005-1541-0XX (Gold plated) 3005-7541-0XX (Nickel plated) 7132 HEX Right Angle Female Cable Plug Crimp type for flexible cable: 3105-1521-OXX (Gold plated) 3105-7521-0XX (Nickel plated) -~<_ 1 Substitute the appropriate cable group for XX: 02. RG178, RG196, M17/93, M17/169 09.141" semi-rigid, RG402, M17/130 03 RG174, RG179, RG316, M17/113, M17/119, M17/172, M17/173 10 | .085" semi-rigid, RG405, M17/133 05 RG178DS, RG196DS 19 | RG174DS, RG316DS, | _M17/152, Times RD316 AEP New Haven, CT 203/776-2813 830 BULKHEAD MOUNTED CABLE PLUGS Bulkhead Mounted Straight Female Cable Plug Clamp type for flexible cable: 3028-1551-OXX (Gold plated) 3028-7551-0XX (Nickel plated) Solder-clamp for semi-rigid cable: 3028-1541-0XX (Gold plated) 3028-7541-OXX (Nickel plated) See page 92 for float-mount version 7/32 HEX Bulkhead Mounted l<___ 1.00 Straight Female Cable Plug 515 Crimp type for flexible cable: Dr 3028-1571-0XX (Gold plated) FLAT 3s 3028-7571-0XX (Nickel plated) # % See page 92 for float-mount version 7132 HEX 11/32 HEX 3/8 HEX 9/32-40 NEF - 2A Substitute the appropriate cable group for XX: 02. _RG178, RG196, M17/93, M17/169 09 | .141" semi-rigid, RG402, M17/130 03 RG174, RG179, RG316, M17/113, 10.085" semi-rigid, RG405, M17/133 M17/119, M17/172, M17/173 19 RG174DS, RG316DS, 05 | RG178DS, RG196DS , M17/152, Times RD316 Designed for use with .093 max thick panel AEP New Haven. CT BA 203/776-2813CABLE JACKS 0 Straight Male Cable Jack Clamp type for flexible cable: 3001-1551-OXX (Gold plated) 3001-7551-0XX (Nickel plated) Solder-clamp for semi-rigid cable: 3001-1541-0XX (Gold Plated) 3001-7541-0XX (Nickel plated) 7/132 HEX Straight Male Cable Jack + 1.02 Crimp type for flexible cable: 280 3001-1571-OXX (Gold plated) 3001-7571-0XX (Nickel plated) Right Angle Male Cable Jack < 50 5 Clamp type for flexible cable: 3041-1551-OXX (Gold plated) 3041-7551-OXX (Nickel plated) Solder-clamp for semi-rigid cable: 3041-1541-OXX (Gold plated) 3041-7541-0XX (Nickel plated) Right Angle Male Cable Jack + 50 _ Crimp type for flexible cable: 3141-1521-OXX (Gold plated) 3141-7521-OXX (Nickel plated) Substitute the appropriate cable group for XX: 02 | RG178, RG196, M17/93, M17/169 09 | .141" semi-rigid, RG402, M17/130 03 | RG174, RG179, RG316, M17/113, 10 | .085" semi-rigid, RG405, M17/133 M17/119, M17/172, M17/173 19 | RG174DS, RG316DS, 05 | RG178DS, RG196DS M17/152, Times RD316 AEP New Haven, CT 203/776-2813 B850 BULKHEAD JACKS ESS 75 4 aan | kag = 1 | #10-32 UNF 7132 1/4 HEX Straight Male Bulkhead Cable Jack Clamp type for flexible cable: 3003-1551-0XX (Gold plated) 3003-7551-0XX (Nickel plated) Solder-clamp for semi-rigid cable: 3003-1541-OXX (Gold plated) 3003-7541-0XX (Nickel plated) See page 93 for float-mount version fe $$$ $$___- 1.14 _______-______ [+ .425-___>| 875 | yy #& Le - TT fh ; 7132 HEX #10-32 UNF \_ 4/4 HEX Straight Male Bulkhead Cable Jack Crimp type for flexible cable: 3003-1571-OXX (Gold plated) 3003-7571-0XX (Nickel plated) See page 93 for float-mount version ~___ .70 _____| Dp j<-_ 578 ___>| Lat jt 420 #10-32 UNF 1/4 HEX 7132 HEX Right Angle Male Bulkhead Cable Jack Clamp type for flexible cable: 3006-1551-0XX (Gold plated) 3006-7551-0XX (Nickel plated) Solder-clamp for semi-rigid cable: 3006-1541-0XX (Goid plated) 3006-7541-OXX (Nickel plated) See page 94 for float-mount version Dp + FLAT{*__-420 | 63 1/4 HEX Jk #10-32 UNF Right Angle Male Bulkhead Cable Jack Crimp type for flexible cable: 3106-1521-0XX (Gold plated) 3106-7521-0XX (Nickel plated) See page 94 for float-mount version Substitute the appropriate cable group for XX: 02. RG178, RG196, M17/93, M17/169 03 . RG174, RG179, RG316, M17/113, M17/119, M17/172, M17/173 05 | RG178DS, RG196DS 09 | .141" semi-rigid, RG402, M17/130 10 | .085" semi-rigid, RG405, M17/133 19 ) RG174DS, RG316DS, M17/152, Times RD316 Designed for use with .093 max thick panel See page 143 for D flat location in relation to hex. 86 AEP New Haven, CT 203/776-2813BULKHEAD RECEPTACLES 0 Straight Male Bulkhead Jack Receptacle Solder pot contact e Rear mount 3004-1511-000 (Gold plated) 3004-7511-000 (Nickel plated) See page 95 for float-mount version ae ry 140 .062 DIA (7) i 035 DIA a pnc|! | PF #10-32 UNF 1/4 HEX Straight Male Bulkhead Jack Receptacle Solder pot contact Front mount 3019-1511-000 (Gold plated) 3019-7511-000 (Nickel plated) See page 95 for float-mount version .062 DIA | ; DIA +4 #10-32 UNF Straight Male Bulkhead Jack Receptacle e Solder pot contact e Recessed front mount 3014-1511-000 (Gold plated) 3014-7511-000 (Nickel plated) See page 95 for float-mount version j .46 032 >] 28 Mn 14 wae Wars ~Ft .035 DIA 3/8-32 NEF - 2A 716 HEX Lane HEX Right Angle Male Bulkhead Jack Receptacle Solder pot contact Front mount 3012-1511-000 (Gold plated) 3012-7511-000 (Nickel plated) 1/4 HEX #10-32 UNF i >|| |< 062 DIA 035 DIA Designed for use with .093 max thick panel AEP New Haven, CT See page 143 for D flat location in relation to hex. 203/776-2813 970 BULKHEAD PLUG RECEPTACLES 69 - .297 .260 | [ .062 DIA hb [ 035 DIA = =F #10-32 UNF 1/4 HEX Straight Female Bulkhead Plug Receptacle * Solder pot contact e Front mount 3017-1511-000 (Gold plated) 3017-7511-000 (Nickel plated) See page 96 for float-mount version .062 DIA i Straight Female Bulkhead Plug Receptacle e Solder pot contact Rear mount -3048-1511-000 (Gold plated) 3048-7511-000 (Nickel plated) See page 96 for float-mount version << .39 1 _> 1/4 HEX #10-32 UNF 2A imeem Right Angle Female Bulkhead Plug Receptacle e Solder pot contact e Front mount 3097-1511-000 (Gold plated) 3097-751 1-000 (Nickel plated) Designed for use with .093 max thick panel 88 AEP New Haven, CT 203/776-2813P.C. BOARD RECEPTACLES a Straight Male Jack Receptacle 3009-151 1-000 (Gold plated) 3009-7511-000 (Nickel plated) .450 ~4 295 TT 155 _4 .038 DIA .250 t~ SQ y + |.200 (TYP) Ft L oer | ono sa (TYP) Right Angle Male Jack Receptacle A B Cc D 43 15 50 38 3010-1511-000 (Gold plated) 3010-7511-000 _ (Nickel plated) A B Cc D 0 | .215 | 56 | .437 3010-1511-003 (Gold plated) 3010-7511-003 (Nickel plated) .250 j~ SQ > rT ye) a Br , | eit ol Le o40 s (TYP) Straight Female Plug Receptacle 3025-1511-000 (Gold plated) 3025-751 1-000 (Nickel plated) L See page 97 for blind-mate version a 7 - _ /} | : .038 DIA 40 SQ (TYP) Right Angle Female 430-1 250 Plug Receptacle a =| ies i SO 15 -. 200 3042-1511-000 (Gold plated) | (TYP) 3042-7511-000 (Nickel plated) See page 97 for blind-mate version 52 391 .038 DIA rey I _+| I-10 SQ TYP) T AEP New Haven, CT 203/776-2813 890 P.C. BOARD RECEPTACLES ADAPTERS ~<_ .640-_____ >} }-~<-.485 _ .440 "| 155 ge | + fot ee | 8 038 UNE OA DIA _+| | 040 SQ 1/4 HEX (TYP) Bulkhead Mounted Straight Male Jack P.C. Board Receptacle 3109-151 1-000 (Gold plated) 3109-7511-000 (Nickel plated) See page 97 for float-mount version 430 040 .250 .150 SQ i sa | | : YP .200 18 (YP) (TYP) - + + Lge DIA 578 1/4 HEX #10-32 UNF 2A [_ D FLAT Bulkhead Mounted Right Angle Male Jack P.C. Board Receptacle 3110-151 1-000 (Gold plated) 3110-7511-000 (Nickel plated) See page 97 for float-mount version __ 90 _}> r< 420 e- 235 py LA 4 ts aaa rN i ys Mo HEX #10-32 UNF - 2A Bulkhead Mounted Straight Male Jack to Jack Adapter 5252-1501-000 (Gold plated) 5252-7501-000 (Nickel plated) See page 96 for float-mount version Designed for use with .093 max thick panel 90 AEP New Haven, CT 203/776-2813FLOAT MOUNT ll J BLIND MATE AEP SLB series connectors can provide a low-cost alternative to other float mount/blind mate connector systems in applications below 4 GHz. The radial float of the panel mounted connectors, combined with the closed-entry mating end hood of the plugs, allows the mating pairs to be misaligned up to about .025 without damage occuring during mating. Since the axial float is not spring-loaded, panel-to-panel separation should be maintained within +.010. Mating force per connector is 3 pounds maximum, and unmating force is 8 ounces minimum. External actuators, such as levers or jackscrews, should be considered in applications requiring simultaneous mating of multiple connector pairs, especially when one side is P.C. board mounted. We recommend that only one side of the mating pair be float mounted. MATING DETAIL, 3025-151 1-005 AND 3003-1551-703 PC. BOARD PANEL NO NA j 3025-1511-005 3003-1551-703 Feet x a < | fe | V0 SPACER FLATWASHER -t 230 NOMINAL MATING OVERLAP e PANEL - SEPARATION .430 + .010 To determine panel separation: Add projection from panel or PC. board for each connector used and subtract mating overlap (.230). Projection for each connector is shown on product pages, and is with all axial float loaded toward panel. Axial float is .008 for all items. Lockwasher is not included with connectors for .093 panel. Radial float: When desired float is determined, drill panel to .230 diameter plus float amount. AEP New Haven, CT 203/776-2813 9 10 CABLE PLUGS SS TT Rn Oa eee s=SeS SSS FLOAT MOUNT / BLIND MATE Bulkhead Mounted Straight Female Cable Plug Float Mount/Blind Mate * Closed-entry mating end hood Dim. A Dim. B Clamp type for flexible cable: j=)? 031 500 3028-1551-5XX (Gold plated) Ss 3028-7551-5XX (Nickel plated) 062 .469 3028-1551-6XX (Gold plated) 3028-7551-6XX (Nickel plated) 093 .438 3028-1551-7XX (Gold plated) 3028-7551-7XX (Nickel plated) 9/32-40 NEF - 2A 7132 HEX 3/8 HEX 11/32 HEX Dim. A Dim. B Solder-clamp for semi-rigid cable: SPACER .031 .500 3028-1541-5XX (Gold plated) PANEL 3028-7541-5XX (Nickel plated) 062 469 3028-1541-6XX (Gold plated) 3028-7541-6XX (Nickel plated) 093 .488 3028-1541-7XX (Gold plated) 3028-7541-7XX (Nickel plated) LOCKWASHER FLAT WASHER Bulkhead Mounted Straight Female Cable Plug < 50 Float Mount/Blind Mate ne Closed-entry mating end hood + 1.05 > BY D FLAT ro Dim. A Dim. B Crimp type for flexible cable: 031.500 3028-1571-5XX (Gold plated) 3028-7571-5XX (Nickel plated) 062 .469 3028-1571-6XX (Gold plated) 3028-7571-6XX (Nickel plated) 093 .438 3028-1571-7XX (Gold plated) 3028-7571-7XX (Nickel plated) 9/32-40 NEF - 2A 7/32 HEX 3/8 HEX 11/32 HEX SPACER PANEL LOCKWASHER FLAT WASHER Substitute the appropriate cable group for XX: 02. RG178, RG196, M17/93, M17/169 09 | .141" semi-rigid, RG402, M17/130 03 . RG174, RG179, RG316, M17/113, 10 | .085" semi-rigid, RG405, M17/133 _M17/119, M17/172, M17/173 19 RG174DS, RG316DS, 05 _ RG178DS, RG196DS M17/152, Times RD316 See page 91 for float mount details AEP New Haven, CT 92 203/776-2813BULKHEAD CABLE JACKS = = = wa QSSS=>= UO FLOAT MOUNT / BLIND MATE Float Mount Straight Male - Bulkhead Cable Jack < 75 le .425 _ Dim. A Dim. B Clamp type for flexible cable: 031 365 3003-1551-5XX (Gold plated) 3003-7551-5XX (Nickel plated) 062 .334 3003-1551-6XX (Gold plated) 3003-7551-6XX (Nickel plated) 093 303 3003-1551-7XX (Gold plated) f ey AL) ti 3003-7551-7XX (Nickel plated) #10-32 UNF 2a/ A AY 1/4 HEX 7132 HEX Dim. A Dim. B Solder-clamp for semi-rigid cable: LOCKWASHER oa .031 .365 3003-1541-5XX (Gold plated) FLAT WASHER 3003-7541-5XX (Nickel plated) 062 .334 3003-1541-6XX (Gold plated) 3003-7541-6XX (Nickel plated) 093 .303 3003-1541-7XX (Gold plated) 3003-7541-7XX (Nickel plated) Float Mount Straight Male - 1.14 - Bulkhead Cable Jack 425 Dim. A Dim. B Crimp type for flexible cable: yr 031 365 3003-1571-5XX (Gold plated) "8 ao 3003-7571-5XX (Nickel plated) i ef LZ 062 .334 3003-1571-6XX (Gold plated) Ef _ | 3003-7571-6XX (Nickel plated) 4 ey 093 303 3003-1571-7XX (Gold plated) 49.39 unr on 7M A 3003-7571-7XX (Nickel plated) 1/4 HEX 7/32 HEX SPACER LOCKWASHER PANEL FLAT WASHER Substitute the appropriate cable group for XX: 02 | RG178, RG196, M17/93, M17/169 09 | .141" semi-rigid, RG402, M17/130 03 | RG174, RG179, RG316, M17/113, 10 | .085" semi-rigid, RG405, M17/133 M17/119, M17/172, M17/173 19 | RG174DS, RG316DS, 05 | RG178DS, RG196DS M17/152, Times RD316 AEP New Haven, CT See page 91 for float mount details 203/776-2813 93BULKHEAD JACK RECEPTACLES en | (a FLOAT MOUNT / BLIND MATE Float Mount < 70 > Right Angle Male le 57g Bulkhead Cable Jack ea Dim. A Dim. B Clamp type for flexible cable: i <p" | _-|- SPACER 031.360 3006-1551-5XX (Gold plated) Dv FLAT ~ 3006-7551-5XX (Nickel plated) 7 062 .329 3006-1551-6XX (Gold plated) 3006-7551-6XX (Nickel plated) 7 + 093 .298 3006-1551-7XX (Gold plated) = ; | 59 3006-7551-7XX (Nickel plated) #10-32 UNF - 2A | 1/4 HEX | 470 Dim. A Dim. B Solder-clamp for semi-rigid cable: Son waahen | 031.360 3006-1541-5XX (Gold plated) : 3006-7541-5XX (Nickel plated) PANEL 0 ee Z 062. .329 3006-1541-6XX (Gold plated) 7132 HEX 3006-7541-6XX (Nickel plated) 093 .298 3006-1541-7XX (Gold plated) 3006-7541-7XX (Nickel plated) Float Mount Right Angle Male Bulkhead Cable Jack l~ 420 | qn ; ; . . le" T- _- SPACER Dim. A Dim. B Crimp type for flexible cable: D" FLAT_ | y .031 360 3106-1521-5XX (Gold plated) o FLA 3106-7521-5XX (Nickel plated) Sate 062 329 3106-1521-6XX (Gold plated) exf ] + 3106-7521-6XX (Nickel plated) HI 63 093 .298 3106-1521-7XX (Gold plated) #10-32 UNF - 2A HEA 3106-7521-7XX (Nickel plated) 1/4 HEX LOCKWASHER FLAT WASHER PANEL Substitute the appropriate cable group for XX: 02 RG178, RG196, M17/93, M17/169 09 L .141" semi-rigid, RG402, M17/130 03. RG174, RG179, RG316, M17/113, 10 . .085" semi-rigid, RG405, M17/133 M17/119, M17/172, M17/173 19 | RG174DS, RG316DS, 05 _RG178DS, RG196DS M17/152, Times RD316 See page 91 for float mount details AEP New Haven, CT 94 203/776-2813BULKHEAD CABLE JACKS FLOAT MOUNT / BLIND MATE Float Mount Straight Male Bulkhead Jack Receptacle * Solder pot contact e Rear mount Dim. A Dim. B .031 .370 3004-1511-500 (Gold plated) 3004-7511-500 (Nickel plated) 062 .339 3004-1511-600 (Gold plated) 3004-7511-600 (Nickel plated) 093 = .308 3004-1511-700 (Gold plated) 3004-7511-700 (Nickel plated) 7 | t .140 [* DIA 7 tae 1/4 HEX LOCKWASHER Ge #10-32 UNF - 2A Sf, yy Z PANEL A gl /4 HEX 1 XC SPACER FLAT WASHER Float Mount Straight Male Bulkhead Jack Receptacle e Solder pot contact e Front mount Dim. A .031 3019-1511-500 3019-7511-500 Nickel plated) 3019-1511-600 Gold plated) (Gold plated) ( ( 3019-7511-600 (Nickel plated) ( ( .062 093 3019-1511-700 (Gold plated) 3019-7511-700 Nickel plated) we .255 > 215 062 DIA La | | ' THE \ F 035 AL DIA / A #10-32 UNF - 2A 1/4 HEX 1/4 HEX SPACER LOCKWASHER PANEL FLAT WASHER Float Mount 032 fa of? Straight Male op end Bulkhead Jack Receptacle e Solder pot contact e Recessed front mount Dim. A 031 3014-1511-500 (Gold plated) 3014-7511-500 = (Nickel plated) .062 3014-1511-600 (Gold plated) 3014-7511-600 (Nickel plated) 093 3014-1511-700 (Gold plated) ( 3014-7511-700 Nickel plated) ail 7I16 wo! SPACER PANEL TSE] \ FLAT fy DIA 3/8-32 NEF - 2A 7/16 HEX LOCKWASHER WASHER AEP New Haven, CT 203/776-2813 See page 91 for float mount details 95BULKHEAD PLUG RECEPTACLES FLOAT MOUNT / BLIND MATE Float Mount Straight Female Bulkhead Plug Receptacle e Solder pot contact e Front mount Closed-entry mating end hood 062 DIA | Dim. sity Dim. A er 031 3017-1511-500 (Gold plated) We ft 036 DIA 3017-7511-500 _ (Nickel plated) AN nose UNF - 2A 062 3017-1511-600 (Gold plated) 1/4 HEX +i HEX 3017-7511-600 (Nickel plated) SPACER LOCKWASHER 093 3017-1511-700 (Gold plated) 3017-7511-700 (Nickel plated) PANEL FLAT WASHER Float Mount Straight Female Bulkhead Plug Receptacle Solder pot contact e Rear mount Closed-entry mating end hood TT NG f 062 DIA F Dim. A Dim. B fost 031 .515 3048-1511-500 (Gold plated) iM] 4 a) i 3048-7511-500 (Nickel plated) = | 085 062 .484 3048-1511-600 (Gold plated) 5/16-32 NEF - 2A ZH: 3048-7511-600 (Nickel plated) 3/8 HEX AN 1132 HEX 093 .453 3048-1511-700 (Gold plated) LOCKWASHER SPACER 3048-7511-700 (Nickel plated) FLAT WASHER PANEL Float Mount Straight Male Jack To Jack Adapter * Connects two plugs Dim. A Dim. B Y 031 .360 5252-1501-500 (Gold plated) Es] _ 5252-7501-500 (Nickel plated) = _. = 062 .329 5252-1501-600 (Gold plated) a yh 5252-7501-600 (Nickel plated) #10-32 UNF - 2A \ 093 .298 5252-1501-700 (Gold plated) 1/4 HEX 1/4 HEX 5252-7501-700 (Nickel plated) LOCKWASHER SPACER FLAT WASHER PANEL See page 91 for float mount details AEP New Haven, CT 203/776-281 96 03/776 3P.C. BOARD RECEPTACLES yi FLOAT MOUNT / BLIND MATE Float Mount < 64 > Straight Male Jack es >| 155 P.C. Board Receptacle ae Qs 204 Dim. A Dim. B | Wace 031 .380 3109-1511-500 (Gold plated) 3109-7511-500 (Nickel .plated) + | () i 062 349 3109-1511-600 (Gold plated) lea 1 et 3109-7511-600 (Nickel plated) =| 093 318 3109-1511-700 (Gold plated) #10-32 UNF - 2A + L os so 3109-7511-700 (Nickel plated) 114 HEX cece LOCKWASHER PANEL FLAT WASHER Float Mount ix 430 050 Som! Right Angle Male Jack ss 200 P.C. Board Receptacle Pave) + Ee 7 Dim. A Dim. B | - | Co) 031 365 3110-1511-500 (Gold plated) [ he - cag a ( . a 3110-7511-500 (Nickel plated) 7 Ped Le oao 80 ervey ( 1 062 .334 3110-1511-600 (Gold plated) eee SPACER 3110-7511-600 (Nickel plated) 425 a PANEL 093 303 3110-1511-700 (Gold plated) [7 : FLAT WASHER, 3110-7511-700 (Nickel plated) 114 HEX #10-32 UNF - 2A Straight Female Plug P.C. Board Receptacle Closed-entry mating end hood 3025-1511-005 (Gold plated) 3025-7511-005 (Nickel plated) Ht.250 SQ [aves acy B+ eB $ <p on -038 _ LL 040 SQ ( TYP) Right Angle Female Plug <.250 SO} P.C. Board Receptacle nae * Closed-entry mating end hood a ah 3042-1511-006 (Gold plated) 7 Ce i 3042-7511-006 (Nickel plated) oe _+| = 040 sa TYP) AEP New Haven, CT See page 91 for float mount details 203/776-2813 97