Panel cutting 32,3 max. 25,2 23,2 after screwing 3,6 (1) 18,4%0,4 =p 6 et IE wn om X see table MAX! PANEL THICKNESS: 3,5mm. Only valid if no air gap between RJ 45 JACK and stop area of the HOUSING Connector pitch on panel: Axis X = 27 mm and Axis Y = 21 mm Receptacle mating side according to 600076-3-106 IEC - variant 04 Mating references A and B according to IEC 60603-? (1) Screwing x2 M2,5 screws from 0,3 N.m and 0,5 Nm screw according to DIN 912 and ISO 4762 NO AIR GAP BETWEEN RJ&5 JACK AND HOUSING D) ronal eee aN Ae a Free size fol. < : ub, RJ 45 JACK VARIANT TB X All rights reserved Created by Inspected by Standardisation Date State SONN BAGDIKIAN HASSE 2014-10-09 Final Release angled jack Department EC PD - FR Write Doc-Key / ECM-Nr SMD variant 09 5 951 1100 17.6 +/-0.4 HPP V4 C-PFT w/o clip wra.s usa HARTING Electronics GmbH led jack Type Number Rev. Page STUDER PIN variant | 09 45-551 1102 | 17.6 +/-0.4 |p.30339 espehanp "TB 09455450033 C la