MCC TM Micro Commercial Components HER151 THRU HER158 omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features * * * * * * * Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) High Surge Current Capability High Reliability Low Forward Voltage Drop Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Halogen free available upon request by adding suffix "-HF" 1.5 Amp High Efficient Rectifiers 50 to 1000 Volts Maximum Ratings * * * Operating Temperature: -55C to +125C Storage Temperature: -55C to +150C For capacitive load, derate current by 20% MCC Device Maximum Maximum Catalog Marking Recurrent RMS Number Peak Reverse Voltage Voltage HER151 HER151 50V 35V HER152 HER152 100V 70V HER153 200V 140V HER153 HER154 HER154 300V 210V HER155 HER155 400V 280V HER156 600V 420V HER156 HER157 800V 560V HER157 HER158 HER158 1000V 700V DO-15 Maximum DC Blocking Voltage 50V 100V 200V 300V 400V 600V 800V 1000V D A B Electrical Characteristics @ 25C Unless Otherwise Specified Average Forward IF(AV) 1.5 A TA = 55C Current Peak Forward Surge IFSM 50A 8.3ms, half sine Current Maximum Instantaneous Forward Voltage 1.0V IFM = 1.5A*; HER151-154 VF 1.3V HER155 TA = 25C HER156-158 1.7V Reverse Current At IR 5.0A TA = 25C Rated DC Blocking 100A TA = 100C Voltage (Maximum DC) Maximum Reverse Recovery Time 50ns IF=0.5A, IR=1.0A, Trr HER151-155 75ns Irr=0.25A HER156-158 Typical Junction Capacitance 50pF Measured at HER151-155 CJ 30pF 1.0MHz, VR=4.0V HER156-158 *Pulse Test: Pulse Width 300sec, Duty Cycle 1% Note: Cathode Mark D C DIMENSIONS DIM A B C D INCHES MIN .230 .104 .028 1.000 MAX .300 .140 .034 --- MM MIN 5.8 2.6 0.71 25.40 MAX 7.6 3.6 0.86 --- NOTE 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. Revision: B www.mccsemi.com 1 of 3 2013/01/01 MCC HER151 thru HER158 Micro Commercial Components RATINGS AND CHARACTERISTIC CURVES FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 10W NONINDUCTIVE FIG.2- MAXIMUM AVERAGE FORWARD CURRENT DERATING trr AVERAGE FORWARD CURRENT. (A) 50W NONINDUCTIVE +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) 0 -0.25A (+) -1.0A NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms 1cm 0 25 50 75 100 125 150 175 o AMBIENT TEMPERATURE. ( C) 0.001 20 40 60 80 100 120 HE R1 55 .2 .4 ER15 .6 .8 1.0 1.2 1.4 FORWARD VOLTAGE. (V) FIG.6- TYPICAL JUNCTION CAPACITANCE FIG.5- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 175 60 150 JUNCTION CAPACITANCE.(pF) 80 50 8 154 0.01 56~H 1.0 0.1 1~HER Tj=25 0C HER1 10 1.0 HER15 INSTANTANEOUS FORWARD CURRENT. (A) Tj=100 0C 100 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) PEAK FORWARD SURGE CURRENT. (A) 1.0 10 1000 0.1 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length 2.0 FIG.4- TYPICAL FORWARD CHARACTERISTICS FIG.3- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT. ( A) SET TIME BASE FOR 5/ 10ns/ cm 3.0 8.3ms Single Half Sine Wave JEDEC Method 40 30 20 125 100 HE R1 51 ~H ER R1 56 15 ~H 5 ER 15 8 HE 75 50 25 10 0 0 1 2 5 10 20 50 .1 100 .5 1 2 5 10 20 50 100 200 500 800 REVERSE VOLTAGE. (V) NUMBER OF CYCLES AT 60Hz www.mccsemi.com Revision: B 2 of 3 2013/01/01 TM MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 4Kpcs/Reel Part Number-AP Ammo Packing: 3Kpcs/Ammo Box Part Number-BP Bulk: 25Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: B 3 of 3 2013/01/01 3