Advanced Monolithic Systems AMS3102 300mA LOW DROPOUT VOLTAGE REGULATOR FEATURES APPLICATIONS * Fixed and Adjustable Versions Available * Output Current in excess of 300mA * Very Low Quiescent Current * Reverse Battery Protection * Input-output Differential less than 0.6V * Short Circuit Protection * Internal Thermal Overload Protection * Load Dump Protection * Overvoltage Protection * Mirror Image Insertion Protection * ON/OFF Pin * External PNP Drive * Cellular Telephones * Portable Consumer Equipment * Portable (Notebook) Computers * Battery Powered Systems * Portable Instrumentation * Radio Control Systems * CD/DVD drives GENERAL DESCRIPTION The AMS3102 series consists of positive fixed and adjustable voltage regulators ideally suited for use in battery-powered systems. These devices feature very low quiescent current of 0.3mA or less when supplying 10mA loads. This unique characteristic and the extremely low input-output differential required for proper regulation (0.25V for output currents of 100mA) make the AMS3102 ideal to use for standby power systems. Internal circuitry of AMS3102 is protected from input fault conditions caused by reverse battery installation or input voltages that exceed maximum rated input voltage. During line transients, such as load dump (40V) when the input voltage to the regulator can momentarily exceed the specified maximum operating voltage, the regulator will automatically shut down to protect both internal circuits and the load. The AMS3102 series also includes internal current limiting, thermal shutdown, and is able to withstand temporary power-up with mirror-image insertion. The AMS3102 is offered in the 3-pin TO-92 package, SOT-89, 3 lead SOT-23, 5 lead SOT-23 and 8 lead SOIC packages. The device is provided with On/Off pin in SOT-23 5L and in 8 lead SOIC package. ORDERING INFORMATION OUTPUT VOLTAGE FIXED PACKAGE TYPE TO-92 AMS3102AN-X AMS3102N-X SOT-89 AMS3102AL-X (R) AMS3102L-X (R) 3L SOT-23 AMS3102AM-X AMS3102M-X ADJ. X = 2.0V, 2.5V, 3.0V, 3.3V, 3.5V, 4.0V, 5.0V. R = Reverse pin-out option Advanced Monolithic Systems, Inc. www.advanced-monolithic.com TEMP. 5L SOT-23 AMS3102AM1-X AMS3102M1-X AMS3102CM1 SO-8 AMS3102AS-X AMS3102S-X AMS3102CS Phone (925) 443-0722 RANGE IND IND IND Fax (925) 443-0723 AMS3102 ABSOLUTE MAXIMUM RATINGS (Note 1) Input Voltage Operating Overvoltage Protection Internal Power Dissipation (Note 4) Maximum Junction Temperature +125C Storage Temperature -65C to +150C Lead Temperature (Soldering 10 sec) 230C ESD 2000V 21V 24V to 40V Internally Limited ELECTRICAL CHARACTERISTICS Electrical Characteristics at VIN =VO +1V, IO =10mA, TJ=25C, C2 = 22F unless otherwise specified. PARAMETER CONDITIONS Min. AMS3102A-X Typ. Max. Min. AMS3102-X Typ. Max. Units Fixed Output Voltage Versions Output Voltage Tolerance (VIN+1V) V 21V, IO=100 mA IN -40C T 125C -1.0 +1.0 -3.0 +3.0 - 3.0 + 3.0 5.0 % % J Line Regulation (VIN+1V) V 15V 5 10 5 10 mV 9V V 21V 8 30 8 30 mV 5mA I 100 mA 30 50 30 50 mV 5mA 10 200 mA 50 70 50 70 mV IN IN Load Regulation Dropout Voltage O I = 100 mA 0.25 0.3 0.3 0.4 V I = 200 mA 0.5 0.6 0.5 0.6 V O O Quiescent Current I 10 mA, 0.3 0.5 0.3 0.5 mA I = 100 mA 3 4 3 4 mA I 200 mA (Note 5) 9 12 9 12 mA O O O Output Noise Voltage 10Hz-100kHz, COUT = 100F Output Impedance 100mADC and 10mArms,100Hz=10kHz Ripple Rejection fO =120Hz Maximum Operational Input Voltage Maximum Line Transient RL = 500, VO 5.5V 500 200 55 80 21 22 35 V rms 500 200 m 80 dB 21 22 V 40 35 40 V -35 -40 -35 -40 V -35 -40 -35 -40 V T = 1ms, 100ms Reverse Polarity Input Voltage, D/C Reverse Polarity Input Voltage, Transient RL = 500, T = 1ms, 100ms Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723 AMS3102 ELECTRICAL CHARACTERISTICS Electrical Characteristics at VIN =6V, VOUT =3V IO =10mA, TJ=25C, R1 =27k, C2 = 2F unless otherwise specified. PARAMETER Min. AMS3102C Typ. Max. 1.210 1.235 1.26 V 1.20 1.235 1.270 V 20 V CONDITIONS (Note 2) Units Adjustable Version Reference Voltage IO 100 mA, -40C T 125C, R1=27k, J Measured from VOUT to Adjust Pin Output Voltage Range 2 Line Regulation VOUT + 1V V 21V .02 1.5 mV/V Load Regulation 5mA I 100 mA 0.3 1 % 5mA I 200 mA 1 2 % 0.05 0.3 0.5 0.2 0.4 0.6 V V V During Shutdown RL = 500 0.3 3 0.3 0.5 4 0.5 mA mA mA Output Noise Voltage 10Hz-100kHz 100 Output Impedance 100mADC and 10mArms,100Hz=10kHz 40 Long Term Stability T =1000hr 0.4 Ripple Rejection fO = 120Hz IN O O I 10 mA Dropout Voltage O I = 100 mA O I = 200 mA (Note 5) O Quiescent Current I = 10 mA O I = 100 mA O IO = 10mA, Reference Voltage 1.5V m %/1000hr 80 Maximum Operational Input Voltage Maximum Line Transient Vrms/V 200 dB 21 22 V 35 40 V T = 1ms, 100ms Reverse Polarity Input Voltage, D/C RL = 500, VO -0.3V -35 -40 V Reverse Polarity Input Voltage, Transient RL = 500, T = 1ms, 100ms -35 -40 V On/Off Threshold Voltage VO = 3V On 1.8 Off On/Off Threshold Current 2.5 VOFF = 2.4V 1.5 V 60 A 2.0 35 V Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. For guaranteed performance limits and associated test conditions, see the Electrical Characteristics tables. Note 2: To ensure constant junction temperature, low duty cycle pulse testing is used. Note 3: Limits appearing in boldface type apply over the entire junction temperature range for operation. Limits appearing in normal type apply for TA = TJ = 25C. Note 4: The maximum allowable power dissipation is a function of the maximum junction temperature TJ(MAX), the junction-to ambient thermal resistance J-A and the ambient temperature TA. The maximum allowable power dissipation at any ambient temperature is calculated using: P(MAX) = TJ(MAX) - TA J - A Where the value of the junction-to-ambient thermal resistance are as follows: 195C/W for the TO-92 (N) package, 110C/W for SOT-89 (L), 220C/W for 5 lead SOT-23 (M1) and 160C/W for the molded plastic SO-8 (S). Note 5: Dropout Voltage is defined as the input to output differential at which the output voltage drops 100mV below its nominal value measured at 1V differential. Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723 AMS3102 PIN CONNECTIONS TO-92 Plastic Package (N) OUTPUT SOT-89 (L) SOT-89 (L) R = Reverse pin-out INPUT GND 1 INPUT 2 GND 3 1 OUTPUT 2 3 OUTPUT GND INPUT Bottom View Top View Top View 3 Lead SOT-23 (M) 5 Lead SOT-23 (M1) 8L SOIC SO-Package (S) GND INPUT 1 5 OUTPUT OUTPUT GROUND 2 ON/OFF 3 INPUT 4 ADJ / N/C OUTPUT Top View 8 INPUT 1 GROUND 2 7 GROUND GROUND 3 ADJ 4 N/C 6 GROUND 5 ON/OFF N/C Top View Top View TYPICAL PERFORMANCE CHARACTERISTICS Dropout Voltage IO = 200mA 0.4 0.3 IO = 150mA 0.2 IO = 100mA 0.1 0 0 80 120 40 JUNCTION TEMPERATURE ( C) Advanced Monolithic Systems, Inc. Low Voltage Behavior 0.6 6.0 0.5 OUTPUT VOLTAGE (V) 0.5 INPUT OUTPUT DIFFERENTIAL (V) INPUT OUTPUT DIFFERENTIAL (V) Dropout Voltage 0.6 0.4 0.3 0.2 0.1 0 5.0 AMS3102-3.3 IO = 100mA 4.0 3.0 2.0 0 0 50 100 150 200 250 OUTPUT CURRENT (mA) www.advanced-monolithic.com 300 2.0 Phone (925) 443-0722 3.0 4.0 5.0 6.0 INPUT VOLTAGE (V) Fax (925) 443-0723 AMS3102 TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Output at Voltage Extremes Ripple Rejection Peak Output Current 600 6 85 AMS3102-3.3 3 2 1 0 500 RIPPLE REJECTION (dB) 4 -1 -20 -10 TJ= 25C 400 300 200 100 0 0 10 20 30 40 50 60 INPUT VOLTAGE (V) 0 20 10 INPUT VOLTAGE (V) 60 55 IO= 10mA 50 45 1 10 100 1k 10k 100k 1M FREQUENCY (Hz) Quiescent Current 12.5 10 7.5 5.0 2.5 0 VIN = 6V 10 QUIESCENT CURRENT (mA) 3.3V OUTPUT IO= 100 mA 15 QUIESCENT CURRENT (mA) 8 6 4 2 0 0 1 2 3 4 5 6 7 8 INPUT VOLTAGE (V) 9 10 0 Output Impedance INPUT VOLTAGE (V) IO = 10mA OUTPUT VOLTAGE (V) 1 0.1 1 10 100 1k 10k 100k FREQUENCY (Hz) 1M Advanced Monolithic Systems, Inc. 50 100 150 200 250 300 350 OUTPUT CURRENT (mA) Operation During Load Dump 70 60 50 40 30 =150 ms 20 10 0 ~ CO= 100F 5~ RL= 500 4 3 2 1 0 -100 0 100 200 300 400 TIME (ms) www.advanced-monolithic.com 20 15 IO = 200mA 10 ~ ~ ~ ~ 3 IO = 100mA 2 IO = 50mA 1 IO = 0mA 0 -40 0 40 80 120 TEMPERATURE ( C) Reference Voltage 1.30 ~ ~ 500 REFERENCE VOLTAGE (V) QUIESCENT CURRENT (A) 65 25 10 OUTPUT IMPEDANCE () C2 = 100 F ALUM 70 Quiescent Current Quiescent Current 0.01 75 30 17.5 -2.5 C2 = 100 F TANTALUM 80 RL=500m OUTPUT CURRENT (mA) OUTPUT VOLTAGE (V) 5 AMS3102C ADJUSTABLE 1.28 1.26 1.24 1.22 1.20 1.18 1.16 1.14 1.12 1.10 0 3 6 9 12 15 18 21 24 OUTPUT VOLTAGE (V) Phone (925) 443-0722 Fax (925) 443-0723 AMS3102 APPLICATION NOTES Definition of Terms Typical application circuit (adjustable output) Dropout Voltage: The input-output voltage differential at which the circuit stops to regulate against further reduction in input voltage. Measured when the output voltage has dropped 100mV from the nominal voltage obtained at 1V input, dropout voltage is dependent upon load current and junction temperature. Input Voltage: The DC voltage applied to the input terminal with respect to ground. Input-Output Differential: The voltage difference between the unregulated input voltage and the regulated output voltage for which the regulator will regulate. Line Regulation: The change in output voltage for a change in the input voltage. The line regulation is measured under conditions of low dissipation or by using low duty cycle pulse testing such that the average chip temperature is not significantly affected. Load Regulation: The change in output voltage for a change in load current at constant chip temperature. Long term stability: Output voltage stability under accelerated life-test conditions after 1000 hours with maximum rated voltage and junction temperature. Output Noise Voltage: The rms AC voltage at the output, with constant load and no input ripple, measured over a specified frequency range. Quiescent Current: That part of the positive input current that does not contribute to the positive load current. The regulator ground lead current. Ripple Rejection: The ratio of the peak-to -peak input ripple voltage to the peak-to-peak output ripple voltage at specified frequency. Temperature Stability of VO: The percentage change in output voltage for a thermal variation from room temperature to either temperature extreme. V IN 100k OUT VOUT OFF ON/OFF 10F AMS3102 ADJUSTABLE R1 28k + ADJ ON GND C1 22F R2 Minimum Load In circuits using the fixed output voltage versions, minimum load is not required. For circuits using the adjustable device, the value of R1 and R2 should be chosen such, that a current of approximately 40A flows through the network. The reference voltage (1.235V) is measured between the adjust pin and VOUT. The output voltage can be set by the two resistors R1 and R2 using the following equation: R1 + R2 VO = VREF R1 The value of R1 is recommended to be between 25k to 30 k, and the value of R2 will set the output voltage. External capacitor The AMS3102 series require an output capacitor of 2.2F or greater to ensure device stability. Without the capacitor the device may oscillate. Most type of tantalum or electrolytic capacitor can be used in the applications. A critical characteristic of the capacitors is an ESR value of 5 or less and a resonant frequency above 500kHz. The value of this capacitor can be increased without limits. For higher loads, the value of the capacitor should be increased, specially when the output voltage is set for 2.5V or less. The AMS3102 lowest fixed output voltage value is 2.0V. Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723 AMS3102 PACKAGE DIMENSIONS inches (millimeters) unless otherwise noted. 3L TO-92 PLASTIC PACKAGE (N) 0.1800.005 (4.5720.127) 0.0600.005 (1.5240.127) DIA 0.0600.010 (1.5240.254) 0.90 (2.286) NOM 0.1800.005 (4.5720.127) 0.1400.010 (3.5560.127) 5 NOM 0.500 (12.70) MIN 0.050 (1.270) MAX UNCONTROLLED LEAD DIMENSIONS 0.0150.002 (0.3810.051) 0.0160.003 (0.4060.076) 0.0500.005 (1.2700.127) 10 NOM N (TO-92 ) AMS DRW# 042391 5 LEAD SOT-23 PLASTIC PACKAGE (M1) 0.110-0.120 (2.794-3.048) 0.102-0.118 (2.60-3.00) 0.059-0.070 (1.50-1.75) 0.014-0.020 (0.350-0.50) 0.037 (0.95) TYP 0.018-0.024 (0.457-0.610) 10 NOM 0.036-0.051 (0.090-1.30) 0.0035-0.0080 (0.090-0.20) 0.003 (0.150) MAX Advanced Monolithic Systems, Inc. 0.075 (1.90) TYP www.advanced-monolithic.com 10 NOM 0.018-0.024 (0.457-0.610) (SOT-23-5 ) AMS DRW# 051001 Phone (925) 443-0722 Fax (925) 443-0723 AMS3102 PACKAGE DIMENSIONS inches (millimeters) unless otherwise noted (Continued). SOT-89 PLASTIC PACKAGE (L) 0.173-0.181 (4.40-4.60) 0.055-0.063 (1.40-1.60) 0.014-0.017 (0.35-0.44) 0.064-0.072 (1.62-1.83) 0.155-0.167 (3.94-4.25) 0.084-0.090 (2.13-2.29) 0.090-0.102 (2.29-2.60) 0.035-0.047 (0.89-1.20) 0.059 (1.50) BSC 0.014-0.019 (0.36-0.48) 0.017-0.022 (0.44-0.56) L (SOT-89 ) AMS DRW# 042392 0.118 (3.00) BSC 8 LEAD SOIC PLASTIC PACKAGE (S) 0.189-0.197* (4.801-5.004) 8 7 6 5 0.228-0.244 (5.791-6.197) 0.150-0.157** (3.810-3.988) 1 2 3 4 0.010-0.020 x 45 (0.254-0.508) 0.053-0.069 (1.346-1.752) 0.004-0.010 (0.101-0.254) 0.014-0.019 (0.355-0.483) 0.008-0.010 (0.203-0.254) 0.050 (1.270) TYP 0-8 TYP 0.016-0.050 (0.406-1.270) S (SO-8 ) AMS DRW# 042293 *DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE **DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723