TH97/2478 5KP5.0C SERIES IATF 0060636 SGS TH07/1033 BI-DIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR D6 VBR : 5.0 - 180 Volts PPK : 5000 Watts FEATURES : 1.00 (25.4) MIN. 0.360 (9.1) 0.340 (8.6) * 5000W Peak Pulse Power * Excellent clamping capability * Low incremental surge resistance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1A above 10V * Pb / RoHS Free 0.360 (9.1) 0.340 (8.6) 1.00 (25.4) MIN. 0.052 (1.32) 0.048 (1.22) MECHANICAL DATA * Case : Void-free molded plastic body * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 2.1 grams TH09/2479 Dimensions in inches and ( millimeters ) DEVICES FOR UNIPOLAR APPLICATIONS For uni-directional without "C" Electrical characteristics apply in both directions MAXIMUM RATINGS Rating at 25 C ambient temperature unless otherwise specified. Rating Peak Pulse Power Dissipation at tp = 1ms Symbol Value Unit PPK Minimum 5000 W PD 8.0 W TJ, TSTG - 55 to + 150 C (Note 1, Fig. 4) Steady State Power Dissipation at T L = 75 C Lead Lengths 0.375", (9.5mm) (Note 2) Operating and Storage Temperature Range Notes : (1) Non-repetitive Current pulse, per Fig. 2 and derated above Ta = 25 C per Fig. 1 (2) Mounted on Copper Leaf area of 0.79 in2 (20mm 2). Page 1 of 4 Rev. 08 : October 11, 2006 TH97/2478 TH09/2479 IATF 0060636 SGS TH07/1033 ELECTRICAL CHARACTERISTICS (Rating at 25 C ambient temperature unless otherwise specified) Breakdown Voltage @ IT ( Note 1 ) IT (mA) 50 Reverse Stand off Voltage VRM (V) 5.0 Maximum Reverse Leakage @ VRM IR (A) 10000 Maximum Peak Pulse Current (Note2) IPPM (A) 520 Maximum Clamping Voltage @ IPPM VC (V) 9.60 Maximum Temperature Coefficient of VBR (%/C) 0.057 Type 5KP5.0C VBR (V) Min. Max. 6.40 7.30 5KP5.0CA 6.40 7.00 50 5.0 10000 543 9.20 0.057 5KP6.0C 6.67 8.15 50 6.0 10000 439 11.4 0.061 5KP6.0CA 6.67 7.37 50 6.0 10000 485 10.3 0.061 5KP6.5C 7.22 8.82 50 6.5 4000 407 12.3 0.065 5KP6.5CA 7.22 7.98 50 6.5 4000 447 11.2 0.065 5KP7.0C 7.78 9.51 50 7.0 2000 378 13.3 0.068 5KP7.0CA 7.78 8.60 50 7.0 2000 417 12.0 0.068 5KP7.5C 8.33 10.2 5.0 7.5 500 350 14.3 0.073 5KP7.5CA 8.33 9.21 5.0 7.5 500 388 12.9 0.073 5KP8.0C 8.89 10.9 5.0 8.0 300 333 15.0 0.075 5KP8.0CA 8.89 9.83 5.0 8.0 300 367 13.6 0.075 5KP8.5C 9.44 11.5 5.0 8.5 100 314 15.9 0.078 5KP8.5CA 9.44 10.4 5.0 8.5 100 347 14.4 0.078 5KP9.0C 10.0 12.2 5.0 9.0 40 295 16.9 0.081 5KP9.0CA 10.0 11.1 5.0 9.0 40 325 15.4 0.081 5KP10C 11.1 13.6 5.0 10 30 266 18.8 0.084 5KP10CA 11.1 12.3 5.0 10 30 294 17.0 0.084 5KP11C 12.2 14.9 5.0 11 10 249 20.1 0.086 5KP11CA 12.2 13.5 5.0 11 10 274 18.2 0.086 5KP12C 13.3 16.3 5.0 12 10 227 22.0 0.088 5KP12CA 13.3 14.7 5.0 12 10 251 19.9 0.088 5KP13C 14.4 17.6 5.0 13 10 210 23.8 0.090 5KP13CA 14.4 15.9 5.0 13 10 232 21.5 0.090 5KP14C 15.6 19.1 5.0 14 10 194 25.8 0.092 5KP14CA 15.6 17.2 5.0 14 10 215 23.2 0.092 5KP15C 16.7 20.4 5.0 15 10 188 26.9 0.094 5KP15CA 16.7 18.5 5.0 15 10 206 24.4 0.094 5KP16C 17.8 21.8 5.0 16 10 176 28.8 0.096 5KP16CA 17.8 19.7 5.0 16 10 192 26.0 0.096 5KP17C 18.9 23.1 5.0 17 10 164 30.5 0.097 5KP17CA 18.9 20.9 5.0 17 10 181 27.6 0.097 5KP18C 20.0 24.4 5.0 18 10 155 32.2 0.098 5KP18CA 20.0 22.1 5.0 18 10 172 29.2 0.098 5KP20C 22.2 27.1 5.0 20 10 139 35.8 0.099 5KP20CA 22.2 24.5 5.0 20 10 154 32.4 0.099 5KP22C 24.4 29.8 5.0 22 10 127 39.4 0.100 5KP22CA 24.4 26.9 5.0 22 10 141 35.5 0.100 5KP24C 26.7 32.6 5.0 24 10 116 43.0 0.101 5KP24CA 26.7 29.5 5.0 24 10 128 38.9 0.101 5KP26C 28.9 35.3 5.0 26 10 107 46.6 0.101 5KP26CA 28.9 31.9 5.0 26 10 119 42.1 0.101 5KP27A 30.0 36.6 5.0 27 10 102 49.0 0.102 5KP27CA 30.0 33.3 5.0 27 10 112 44.6 0.102 5KP28C 31.1 38.0 5.0 28 10 99 50.1 0.102 5KP28CA 31.1 34.4 5.0 28 10 110 45.4 0.102 5KP30C 33.3 40.7 5.0 30 10 93 53.5 0.103 5KP30CA 33.3 36.8 5.0 30 10 103 48.4 0.103 Page 2 of 4 Rev. 08 : October 11, 2006 TH97/2478 TH09/2479 IATF 0060636 SGS TH07/1033 ELECTRICAL CHARACTERISTICS (Rating at 25 C ambient temperature unless otherwise specified) Breakdown Voltage @ IT ( Note 1 ) Type VBR (V) Min. Max. 36.7 44.9 36.7 40.6 40.0 48.9 40.0 44.2 44.4 54.3 44.4 49.1 47.8 58.4 47.8 52.8 50.0 61.1 50.0 55.3 53.3 65.2 53.3 58.9 56.7 69.3 56.7 62.7 60.0 73.3 60.0 66.3 64.4 78.7 64.4 71.2 66.7 81.5 66.7 73.7 71.1 96.9 71.1 78.6 77.6 95.1 77.6 86.0 83.3 102 83.3 92.1 86.7 106 86.7 95.8 94.4 115 94.4 104 100 122 100 111 111 136 111 123 122 149 122 135 133 163 133 147 167 204 167 184 178 217 178 196 189 231 189 209 200 244 200 221 IT (mA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Reverse Stand off Voltage VRM (V) 33 33 36 36 40 40 43 43 45 45 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 90 90 100 100 110 110 120 120 150 150 160 160 170 170 180 180 Maximum Reverse Leakage @ VRM IR (A) 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5KP33C 5KP33CA 5KP36C 5KP36CA 5KP40C 5KP40CA 5KP43C 5KP43CA 5KP45C 5KP45CA 5KP48C 5KP48CA 5KP51C 5KP51CA 5KP54C 5KP54CA 5KP58C 5KP58CA 5KP60C 5KP60CA 5KP64C 5KP64CA 5KP70C 5KP70CA 5KP75C 5KP75CA 5KP78C 5KP78CA 5KP85C 5KP85CA 5KP90C 5KP90CA 5KP100C 5KP100CA 5KP110C 5KP110CA 5KP120C 5KP120CA 5KP150C 5KP150CA 5KP160C 5KP160CA 5KP170C 5KP170CA 5KP180C 5KP180CA Note: (1) VBR measured after IT applied for 300 s., IT = square wave pulse or equivalent. Page 3 of 4 Maximum Peak Pulse Current (Note2) IPPM (A) 85 94 78 86 70 78 65 72 62 69 58 65 55 61 52 57 49 53 47 52 44 49 40 44 37 41 36 40 33 36 31 34 28 31 26 28 24 26 19 21 18 19 17 18 16 17 Maximum Clamping Voltage @ IPPM VC (V) 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103 94 107 97 114 103 125 113 134 121 139 126 151 137 160 146 179 162 196 177 211 194 263 242 281 258 298 274 316 290 Maximum Temperature Coefficient of VBR (%/C) 0.104 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.112 0.112 0.112 0.112 0.112 0.112 0.114 0.114 0.114 0.114 0.114 0.114 Rev. 08 : October 11, 2006 TH97/2478 TH09/2479 IATF 0060636 SGS TH07/1033 RATING AND CHARACTERISTIC CURVES ( 5KP5.0C SERIES ) FIG.2 - PULSE WAVEFORM 120 PEAK PULSE CURRENT - % IRMS PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT FIG.1 - PULSE DERATING CURVE 100 80 60 40 20 0 0 25 50 75 100 125 150 Tr = 10s 100 Peak Value IRSM Half Value - I RSM 2 50 10X1000 Waveform as defined by R.E.A. 0 175 tp 0 1.0 2.0 3.0 4.0 T, TIME(ms) Ta, AMBIENT TEMPERATURE, ( C) FIG.3 - STEADY STATE POWER DERATING FIG.4 - PULSE RATING CURVE 100 8.0 Pp,PEAK POWER (kW) PD, STEADY STATE POWER DISSIPATION (WATTS) T J=25 C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IRSM 6.0 4.0 2.0 Single Phase Half Wave 60 Hz Resistive or Inductive load 25 50 75 100 1.0 0.1 0.1s 0 0 10 125 150 175 200 1.0s 10s 100s 1.0ms 10ms tp, PULSE WIDTH TL, LEAD TEMPERATURE (C) Page 4 of 4 Rev. 08 : October 11, 2006