General Description
The MAX5732–MAX5735 are 32-channel, 16-bit, voltage-
output, digital-to-analog converters (DACs). All devices
accept a 3V external reference input. The devices
include an internal offset DAC that allows all the outputs
to be offset and a ground-sensing function, allowing out-
put voltages to be referenced to a remote ground.
A 33MHz SPI™-/QSPI™-/MICROWIRE™- and digital
signal processor (DSP)-compatible serial interface con-
trols the MAX5732–MAX5735. Each DAC has a double-
buffered input structure that helps minimize the digital
noise feedthrough from the digital inputs to the outputs,
and allows for synchronous or asynchronous updating
of the outputs. The MAX5732–MAX5735 also provide a
DOUT that allows for read-back or daisy chaining multi-
ple devices. The devices provide separate power
inputs for the analog and digital sections and provide
separate power inputs for the output buffer amplifiers.
The MAX5732–MAX5735 include proprietary deglitch
circuits to prevent output glitches at power-up and
eliminate the need for power sequencing. The devices
provide a software-shutdown mode to allow efficient
power management. The MAX5732–MAX5735 con-
sume 50µA of supply current in shutdown.
The MAX5732–MAX5735 provide buffered outputs that
can drive 10kin parallel with 100pF. The MAX5732 has
a 0 to +5V output range; the MAX5733 has a 0 to +10V
range; the MAX5734 has a -2.5V to +7.5V range; the
MAX5735 has a -5V to +5V range. The MAX5732–
MAX5735 are available in a 56-pin, 8mm x 8mm, thin
QFN package and 64-pin TQFP package and operate
over the 0°C to +85°C temperature range.
Applications
Automatic Test Systems
Optical Router Controls
Industrial Process Controls
Arbitrary Function Generators
Avionics Equipment
Digital Offset/Gain Adjustment
Features
Guaranteed Monotonic to 16 Bits
32 Individual DACs in an 8mm x 8mm, 56-Pin,
Thin QFN Package or 64-Pin TQFP Package
Four Output Voltage Ranges
0 to +5V (MAX5732)
0 to +10V (MAX5733)
-2.5V to +7.5V (MAX5734)
-5V to +5V (MAX5735)
Buffered Voltage Outputs Capable of Driving
10k|| 100pF
Glitch-Free Power-Up
SPI-/QSPI-/MICROWIRE-/DSP-Compatible 33MHz
Serial Interface
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
________________________________________________________________ Maxim Integrated Products 1
Ordering Information
19-3148; Rev 7; 11/05
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
EVALUATION KIT
AVAILABLE
PART
OUTPUT
VOLTAGE
(V)
MAX
INL
(LSB)
PIN-
PACKAGE
PKG
CODE
MAX5732AUTN 0 to +5 ±8 56 Thin
QFN-EP* T5688-3
MAX5732BUTN 0 to +5 ±16 56 Thin
QFN-EP* T5688-3
SPI/QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
Pin Configurations continued at end of data sheet.
Note: All devices operate over the 0°C to +85°C temperature
range.
*EP = Exposed pad (internally connected to VSS).
TOP VIEW
MAX5732–MAX5735
VSS
OUT3
AGND
OUT4
OUT5
OUT6
OUT0
OUT1
OUT2
N.C.
OUT7
OUT8
OUT9
AVCC
11
10
98765432 141312
1
EXPOSED PADDLE
CS
8mm x 8mm THIN QFN-EP
DSP
SCLK
DOUT
DVDD
DIN
LDAC
DGND
GS
CLR
REF
REFGND
VSS
AVDD
20
19
18
17
16
24
23
22
21
15
26
25
28
27
29
30
31
32
333435363738
AGND
OUT23
OUT24
OUT25
OUT26
OUT27
OUT28
OUT29
OUT30
OUT31
39
VSS
4041
OUT21
OUT22
42
AVCC
46
47
48
49
50
43
44
45
51
OUT15
AVDD
REFGND
AVCC
OUT16
OUT17
OUT18
OUT19
OUT20
52
OUT14
53
54
55
OUT11
OUT12
OUT13
56
OUT10
Pin Configurations
Ordering Information continued at end of data sheet.
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—MAX5732 (0 to +5V Output Voltage Range)
(AVCC = +5.25V to +5.5V (Note 1), AVDD = +5V ±5%, DVDD = +2.7V to AVDD, VSS = AGND = DGND = REFGND = GS = 0, VREF =
+3.0V, RL= , CL= 50pF referenced to ground, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
AVCC to VSS, AGND, DGND, REFGND ..................-0.3V to +12V
VSS to AGND, DGND................................................-6V to +0.3V
AVDD, DVDD to AGND, DGND, REFGND.................-0.3V to +6V
AGND to DGND.....................................................-0.3V to +0.3V
REF to AGND, DGND,
REFGND...............-0.3V to the lower of (AVDD + 0.3V) and +6V
REFGND to AGND.................................................-0.3V to +0.3V
Digital Inputs to AGND, DGND,
REFGND..............-0.3V to the lower of (DVDD + 0.3V) and +6V
DOUT to DGND.......-0.3V to the lower of (DVDD + 0.3V) and +6V
OUT_ to VSS.........-0.3V to the lower of (AVCC + 0.3V) and +12V
GS to AGND ................................................................-1V to +1V
Maximum Current into REF...............................................±10mA
Maximum Current into Any Pin .........................................±50mA
Continuous Power Dissipation (TA= +70°C)
Thin QFN (derate 31.3mW/°C above +70°C)...................2.5W
TQFP (derate 25mW/°C above +70°C)............................2.0W
Operating Temperature Ranges
MAX573__UCB ...................................................0°C to +85°C
Junction Temperature......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
DC CHARACTERISTICS
Resolution N 16 Bits
MAX5732A ±4 ±8
Integral Nonlinearity (Note 2) INL MAX5732B ±8 ±16 LSB
Differential Nonlinearity DNL Guaranteed monotonic (Note 3) ±1 LSB
Zero-Scale Error VOS VSS = -0.5V, AVCC = +5.25V (Note 4) ±8 ±40 mV
Full-Scale Error (Note 4) ±8 ±50 mV
Gain Error ±0.1 ±0.5 %FSR
Gain Temperature Coefficient 20 ppm
FSR/°C
DC Crosstalk VSS = -0.5V, AVCC = +5V (Note 5) 50 250 µV
DYNAMIC CHARACTERISTICS
Output-Voltage Settling Time Full-scale change to ±0.5 LSB 20 µs
Voltage-Output Slew Rate 1 V/µs
Digital Feedthrough (Note 6) 5 nV-s
Digital Crosstalk (Note 7) 5 nV-s
Digital-to-Analog Glitch Impulse Major carry transition 120 nV-s
DAC-to-DAC Crosstalk (Note 8) 15 nV-s
Output Noise Spectral Density at
1kHz Full-scale code 250 nV/Hz
ANALOG OUTPUTS (OUT0 to OUT31)
Output Voltage Range VSS = -0.5V, AVCC = +5.25V (Note 1) 0 5 V
Resistive Load to Ground 10 50 k
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS—MAX5732 (0 to +5V Output Voltage Range) (continued)
(AVCC = +5.25V to +5.5V (Note 1), AVDD = +5V ±5%, DVDD = +2.7V to AVDD, VSS = AGND = DGND = REFGND = GS = 0, VREF =
+3.0V, RL= , CL= 50pF referenced to ground, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX
UNITS
Capacitive Load to Ground 50 100 pF
DC Output Impedance 0.1
Sourcing, full-scale code, output connected
to AGND 5
Short-Circuit Current Sinking, zero-scale code, output connected
to AVCC -5
mA
GROUND-SENSE ANALOG INPUT (GS)
Input Voltage Range VGS Relative to AGND
-0.5 +0.5
V
GS Gain AGS
0.995 1.000 1.005
V/V
Input Resistance -0.5V VGS +0.5V, VSS = -0.5V 35 k
REFERENCE INPUT (REF)
Input Resistance 1M
Reference Input Voltage Range VREF Referred to REFGND
2.900 3.000 3.100
V
DIGITAL INPUTS (CS, SCLK, DIN, LDAC, CLR, DSP)
DVDD = +2.7V to +3.6V
0.7 ×
DVDD
Input-Voltage High VIH
DVDD = +4.75V to +5.25V 2.4
V
Input-Voltage Low VIL 0.8 V
Input Capacitance CIN 10 pF
Input Current IIN Digital inputs = 0 or DVDD ±1 µA
POWER REQUIREMENTS (AVCC, VSS, AGND, AVDD, DVDD, DGND)
Output-Amplifier Positive Supply
Voltage AVCC (Note 1)
4.75 5.50
V
Output-Amplifier Negative Supply
Voltage VSS
-0.5
0V
Output-Amplifier Supply Voltage
Difference AVCC - VSS
5.75
V
Analog Supply Voltage AVDD
4.75 5.25
V
Digital Supply Voltage DVDD
2.70 5.25
V
VOUT0 through VOUT31 = 0 10 15 mA
Analog Supply Current AIDD Software shutdown 10 µA
VIH = DVDD, VIL = 0, fSCLK = 20MHz 2.5 3.5
Digital Supply Current DIDD VIH = +2.4V, VIL = +0.8V, fSCLK = 20MHz 5 6.5 mA
VOUT0 through VOUT31 = 0 4 10 mA
Output-Amplifier Positive Supply
Current AICC Software shutdown 20 µA
VOUT0 through VOUT31 = 0
-4 -10 mA
Output-Amplifier Negative Supply
Current ISS VSS = -0.5V Software shutdown -20 µA
Power-Supply Rejection Ratio PSRR -95 dB
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
4 _______________________________________________________________________________________
ELECTRICAL CHARACTERISTICS—MAX5733 (0 to +10V Output Voltage Range)
(AVCC = +10.5V to +11V, AVDD = 5V ±5%, DVDD = +2.7V to AVDD, VSS = AGND = DGND = REFGND = GS = 0, VREF = +3.0V,
RL= , CL= 50pF referenced to ground, TA= TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
DC CHARACTERISTICS
Resolution N 16 Bits
MAX5733A ±4 ±8
Integral Nonlinearity (Note 2) INL MAX5733B ±8 ±16 LSB
Differential Nonlinearity DNL Guaranteed monotonic (Note 3) ±1 LSB
Zero-Scale Error VOS VSS = -0.5V, AVCC = +10V (Note 4) ±8 ±40 mV
Full-Scale Error (Note 4) ±8 ±50 mV
Gain Error ±0.1 ±0.5 % FSR
Gain Temperature Coefficient 20 ppm
FSR/°C
DC Crosstalk VSS = -0.5V, AVCC = +10V (Note 5) 50 250 µV
DYNAMIC CHARACTERISTICS
Output-Voltage Settling Time Full-scale change to ±0.5 LSB 20 µs
Voltage-Output Slew Rate 1 V/µs
Digital Feedthrough (Note 6) 5 nV-s
Digital Crosstalk (Note 7) 5 nV-s
Digital-to-Analog Glitch Impulse Major carry transition 120 nV-s
DAC-to-DAC Crosstalk (Note 8) 15 nV-s
Output Noise Spectral Density at
1kHz Full-scale code 250 nV/Hz
ANALOG OUTPUTS (OUT0 to OUT31)
Output Voltage Range VSS = -0.5V, AVCC = +10.5V (Note 1) 0 10 V
Resistive Load to Ground 10 50 k
Capacitive Load to Ground 50 100 pF
DC Output Impedance 0.1
Sourcing, full scale, output connected to
AGND 5
Short-Circuit Current
Sinking, zero scale, output connected to
AVCC -5
mA
GROUND-SENSE ANALOG INPUT (GS)
Input Voltage Range VGS Relative to AGND -0.5 +0.5 V
GS Gain AGS 0.995 1.000 1.005 V/V
Input Resistance -0.5V VGS +0.5V, VSS = -0.5V 70 k
REFERENCE INPUT (REF)
Input Resistance 1M
Reference Input Voltage Range VREF Referred to REFGND 2.900 3.000 3.100 V
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
_______________________________________________________________________________________ 5
ELECTRICAL CHARACTERISTICS—MAX5733 (0 to +10V Output Voltage Range) (continued)
(AVCC = +10.5V to +11V, AVDD = 5V ±5%, DVDD = +2.7V to AVDD, VSS = AGND = DGND = REFGND = GS = 0, VREF = +3.0V,
RL= , CL= 50pF referenced to ground, TA= TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
DIGITAL INPUTS (CS, SCLK, DIN, LDAC, CLR, DSP)
DVDD = +2.7V to +3.6V 0.7 ×
DVDD
Input-Voltage High VIH
DVDD = +4.75V to +5.25V 2.4
V
Input-Voltage Low VIL 0.8 V
Input Capacitance CIN 10 pF
Input Current IIN Digital inputs = 0 or DVDD ±1 µA
POWER REQUIREMENTS (AVCC, VSS, AGND, AVDD, DVDD, DGND)
Output-Amplifier Positive Supply
Voltage AVCC (Note 1) 10 11 V
Output-Amplifier Negative Supply
Voltage VSS -0.5 0 V
Output-Amplifier Supply Voltage
Difference AVCC - VSS 11 V
Analog Supply Voltage AVDD 4.75 5.25 V
Digital Supply Voltage DVDD 2.70 5.25 V
VOUT0 through VOUT31 = 0 10 15 mA
Analog Supply Current AIDD Software shutdown 10 µA
VIH = DVDD, VIL = 0, fSCLK = 20MHz 2.5 3.5
Digital Supply Current DIDD VIH = +2.4V, VIL = +0.8V, fSCLK = 20MHz 5 6.5 mA
VOUT0 through VOUT31 = 0 4 10 mA
Output-Amplifier Positive Supply
Current AICC Software shutdown 20 µA
VOUT0 through VOUT31 = 0 -4 -10 mA
Output-Amplifier Negative Supply
Current ISS VSS = -0.5V Software shutdown -20 µA
Power-Supply Rejection Ratio PSRR -95 dB
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
6 _______________________________________________________________________________________
ELECTRICAL CHARACTERISTICS—MAX5734 (-2.5V to +7.5V Output Voltage Range)
(AVCC = +7.75V to +8.25V, AVDD = +5V ±5%, DVDD = +2.7V to AVDD, VSS = -2.75V to -3.25V, AGND = DGND = REFGND = GS = 0,
program the offset DAC to 4000hex. VREF = +3.0V, RL= , CL= 50pF referenced to ground, TA= TMIN to TMAX, unless otherwise
noted. Typical values are at TA= +25°C.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
DC CHARACTERISTICS
Resolution N 16 Bits
MAX5734A ±4 ±8
Integral Nonlinearity (Note 2) INL MAX5734B ±8 ±16 LSB
Differential Nonlinearity DNL Guaranteed monotonic (Note 3) ±1 LSB
Zero-Scale Error VOS VSS = -3.25V, AVCC = +7.75V (Note 4) ±8 ±40 mV
Full-Scale Error (Note 4) ±8 ±50 mV
Gain Error ±0.1 ±0.5 %FSR
Gain Temperature Coefficient 20 ppm
FSR/°C
DC Crosstalk VSS = -3.25V, AVCC = +7.75V (Note 4) 50 250 µV
DYNAMIC CHARACTERISTICS
Output-Voltage Settling Time Full-scale change to ±0.5 LSB 20 µs
Voltage-Output Slew Rate 1 V/µs
Digital Feedthrough (Note 6) 5 nV-s
Digital Crosstalk (Note 7) 5 nV-s
Digital-to-Analog Glitch Impulse Major carry transition 120 nV-s
DAC-to-DAC Crosstalk (Note 8) 15 nV-s
Output Noise Spectral Density at
1kHz Full-scale code 250 nV/Hz
ANALOG OUTPUTS (OUT0 to OUT31)
Output Voltage Range VSS = -2.75V, AVCC = +7.75V (Note 1) -2.5 +7.5 V
Resistive Load to Ground 10 50 k
Capacitive Load to Ground 50 100 pF
DC Output Impedance 0.1
Sourcing, full scale, output connected to
AGND 5
Short-Circuit Current
Sinking, zero scale, output connected to
AVCC -5
mA
GROUND-SENSE ANALOG INPUT (GS)
Input Voltage Range VGS Relative to AGND -0.5 +0.5 V
GS Gain AGS 0.995 1.000 1.005 V/V
Input Resistance -0.5V VGS +0.5V, VSS = -0.5V 70 k
REFERENCE INPUT (REF)
Input Resistance 1M
Reference Input Voltage Range VREF Referred to REFGND 2.900 3.000 3.100 V
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
_______________________________________________________________________________________ 7
ELECTRICAL CHARACTERISTICS—MAX5734 (-2.5V to +7.5V Output Voltage Range)
(continued)
(AVCC = +7.75V to +8.25V, AVDD = +5V ±5%, DVDD = +2.7V to AVDD, VSS = -2.75V to -3.25V, AGND = DGND = REFGND = GS = 0,
program the offset DAC to 4000hex. VREF = +3.0V, RL= , CL= 50pF referenced to ground, TA= TMIN to TMAX, unless otherwise
noted. Typical values are at TA= +25°C.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
DIGITAL INPUTS (CS, SCLK, DIN, LDAC, CLR, DSP)
DVDD = +2.7V to +3.6V 0.7 ×
DVDD
Input-Voltage High VIH
DVDD = +4.75V to +5.25V 2.4
V
Input-Voltage Low VIL 0.8 V
Input Capacitance CIN 10 pF
Input Current IIN Digital inputs = 0 or DVDD ±1 µA
POWER REQUIREMENTS (AVCC, VSS, AGND, AVDD, DVDD, DGND)
Output-Amplifier Positive Supply
Voltage AVCC (Note 1) 7.50 8.25 V
Output-Amplifier Negative Supply
Voltage VSS -3.25 -2.50 V
Output-Amplifier Supply Voltage
Difference AVCC - VSS 11 V
Analog Supply Voltage AVDD 4.75 5.25 V
Digital Supply Voltage DVDD 2.70 5.25 V
VOUT0 through VOUT31 = 0 10 15 mA
Analog Supply Current AIDD Software shutdown 10 µA
VIH = DVDD, VIL = 0, fSCLK = 20MHz 2.5 3.5
Digital Supply Current DIDD VIH = +2.4V, VIL = +0.8V, fSCLK = 20MHz 5 6.5 mA
VOUT0 through VOUT31 = 0 4 10 mA
Output-Amplifier Positive Supply
Current AICC Software shutdown 20 µA
VOUT0 through VOUT31 = 0 -4 -10 mA
Output-Amplifier Negative Supply
Current ISS VSS = -2.75V Software shutdown -20 µA
Power-Supply Rejection Ratio PSRR -95 dB
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
8 _______________________________________________________________________________________
ELECTRICAL CHARACTERISTICS—MAX5735 (-5V to +5V Output Voltage Range)
(AVCC = +5.25V to +5.5V, AVDD = +5V ±5%, DVDD = +2.7V to AVDD, VSS = -5.25V to -5.5V, AGND = DGND = REFGND = GS = 0,
program the offset DAC to 8000hex. VREF = +3.0V, RL= , CL= 50pF referenced to ground, TA= TMIN to TMAX, unless otherwise
noted. Typical values are at TA = +25°C.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
DC CHARACTERISTICS
Resolution N 16 Bits
MAX5735A ±4 ±8
Integral Nonlinearity (Note 2) INL MAX5735B ±8 ±16 LSB
Differential Nonlinearity DNL Guaranteed monotonic (Note 3) ±1 LSB
Zero-Scale Error VOS VSS = -5.25V, AVCC = +5.25V (Note 4) ±8 ±40 mV
Full-Scale Error (Note 4) ±8 ±50 mV
Gain Error ±0.1 ±0.5 %FSR
Gain Temperature Coefficient 20 ppm
FSR/°C
DC Crosstalk VSS = -5.75V, AVCC = +5.25V (Note 5) 50 250 µV
DYNAMIC CHARACTERISTICS
Output-Voltage Settling Time Full-scale change to ±0.5 LSB 20 µs
Voltage-Output Slew Rate 1 V/µs
Digital Feedthrough (Note 6) 5 nV-s
Digital Crosstalk (Note 7) 5 nV-s
Digital-to-Analog Glitch Impulse Major carry transition 120 nV-s
DAC-to-DAC Crosstalk (Note 8) 15 nV-s
Output Noise Spectral Density at
1kHz Full-scale code 250 nV/Hz
ANALOG OUTPUTS (OUT0 through OUT31)
Output Voltage Range VSS = -5.25V, AVCC = +5.25V (Note 1) -5 +5 V
Resistive Load to Ground 10 50 k
Capacitive Load to Ground 50 100 pF
DC Output Impedance 0.1
Sourcing, full scale, output connected to
AGND 5
Short-Circuit Current
Sinking, zero scale, output connected to
AVCC -5
mA
GROUND-SENSE ANALOG INPUT (GS)
Input Voltage Range VGS Relative to AGND -0.5 +0.5 V
GS Gain AGS 0.995 1.000 1.005 V/V
Input Resistance -0.5V VGS +0.5V, VSS = -0.5V 70 k
REFERENCE INPUT (REF)
Input Resistance 1M
Reference Input Voltage Range VREF Referred to REFGND 2.900 3.000 3.100 V
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
_______________________________________________________________________________________ 9
ELECTRICAL CHARACTERISTICS—MAX5735 (-5V to +5V Output Voltage Range) (continued)
(AVCC = +5.25V to +5.5V, AVDD = +5V ±5%, DVDD = +2.7V to AVDD, VSS = -5.25V to -5.5V, AGND = DGND = REFGND = GS = 0,
program the offset DAC to 8000hex. VREF = +3.0V, RL= , CL= 50pF referenced to ground, TA= TMIN to TMAX, unless otherwise
noted. Typical values are at TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
DIGITAL INPUTS (CS, SCLK, DIN, LDAC, CLR, DSP)
DVDD = +2.7V to +3.6V
0.7 ×
DVDD
Input-Voltage High VIH
DVDD = +4.75V to 5.25V 2.4
V
Input-Voltage Low VIL 0.8 V
Input Capacitance CIN 10 pF
Input Current IIN Digital inputs = 0 or DVDD ±1 µA
POWER REQUIREMENTS (AVCC, VSS, AGND, AVDD, DVDD, DGND)
Output-Amplifier Positive Supply
Voltage AVCC (Note 1)
4.75 5.50
V
Output-Amplifier Negative Supply
Voltage VSS
-5.50 -4.75
V
Output-Amplifier Supply Voltage
Difference AVCC - VSS 11 V
Analog Supply Voltage AVDD
4.75 5.25
V
Digital Supply Voltage DVDD
2.70 5.25
V
VOUT0 through VOUT31 = 0 10 15 mA
Analog Supply Current AIDD Software shutdown 10 µA
VIH = DVDD, VIL = 0, fSCLK = 20MHz 2.5 3.5
Digital Supply Current DIDD VIH = +2.4V, VIL = +0.8V, fSCLK = 20MHz 5 6.5 mA
VOUT0 through VOUT31 = 0 4 10 mA
Output-Amplifier Positive Supply
Current AICC Software shutdown 20 µA
VOUT0 through VOUT31 = 0
-4 -10 mA
Output-Amplifier Negative Supply
Current ISS VSS = -0.5V Software shutdown -20 µA
Power-Supply Rejection Ratio PSRR -95 dB
Note 1: AVCC should be at least 0.25V higher than the maximum output voltage required from the DAC. Full-scale output is 5V for
the MAX5732.
Note 2: Linearity guaranteed from code 2047 to full scale and from (VSS + 0.3V) to (AVCC - 0.3V).
Note 3: DNL guaranteed over all codes for (VSS + 0.3V) to (AVCC - 0.3V).
Note 4: Zero-scale error is measured at code 0. Full-scale error is measured at code FFFFhex.
Note 5: DC crosstalk is the change in the output level of one DAC at zero or full scale in response to the full-scale output change of all
other DACs.
Note 6: Digital feedthrough is a measure of the impulse injected into the analog outputs from the digital control inputs when the
device is not being written to. It is measured with a worst-case change on the digital inputs.
Note 7: Digital crosstalk is the glitch impulse transferred to the output of one DAC at midscale while a full-scale code change is written
into another DAC.
Note 8: DAC-to-DAC crosstalk is the glitch impulse that appears at the output of one converter due to both the digital change and
subsequent analog output change at another converter.
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
10 ______________________________________________________________________________________
TIMING CHARACTERISTICS—DVDD = +2.7V to +5.25V
(Figures 2 and 3, AVDD = +4.75V to +5.25V, DVDD = +2.7V to +5.25V, AGND = DGND = REFGND = GS = 0, TA= TMIN to TMAX,
unless otherwise noted. Typical values are at TA= +25°C.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Serial Clock Frequency fSCLK 0 25 MHz
SCLK Pulse-Width High tCH 10 ns
SCLK Pulse-Width Low tCL 10 ns
SCLK Fall to CS Fall Setup Time tSCS 10 ns
CS Fall to SCLK Fall Setup Time tCSS 10 ns
CS Rise to SCLK Fall tCS1 At end of cycle in SPI mode only 18 ns
SCLK Fall to CS Rise Setup Time tCS2 0ns
DIN to SCLK Fall Setup Time tDS 10 ns
DIN to SCLK Fall Hold Time tDH 2ns
SCLK Fall to DOUT Fall tSCL Load capacitance = 20pF (Note 9) 35 ns
SCLK Fall to DOUT Rise tSDH Load capacitance = 20pF (Note 9) 35 ns
CS Pulse-Width High tCSPWH 50 ns
CS Pulse-Width Low tCSPWL 20 ns
LDAC Pulse-Width Low tLDAC 20 ns
CLR Pulse-Width Low tCLR 20 ns
TIMING CHARACTERISTICS—DVDD = +4.75V to +5.25V
(Figures 2 and 3, AVDD = +4.75V to +5.25V, DVDD = +4.75V to +5.25V, AGND = DGND = REFGND = GS = 0, TA= TMIN to TMAX,
unless otherwise noted. Typical values are at TA= +25°C.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Serial Clock Frequency fSCLK 033MHz
SCLK Pulse-Width High tCH 10 ns
SCLK Pulse-Width Low tCL 10 ns
SCLK Fall to CS Fall Setup Time tSCS 6ns
CS Fall to SCLK Fall Setup Time tCSS 5ns
CS Rise to SCLK Fall tCS1 At end of cycle in SPI mode only 15 ns
SCLK Fall to CS Rise Setup Time tCS2 0ns
DIN to SCLK Fall Setup Time tDS 10 ns
DIN to SCLK Fall Hold Time tDH 2ns
SCLK Fall to DOUT Fall tSCL Load capacitance = 20pF 20 ns
SCLK Fall to DOUT Rise tSDH Load capacitance = 20pF 20 ns
CS Pulse-Width High tCSPWH 50 ns
CS Pulse-Width Low tCSPWL 20 ns
LDAC Pulse-Width Low tLDAC 20 ns
CLR Pulse-Width Low tCLR 20 ns
Note 9: The maximum clock frequency (fSCLK) is 10MHz in daisy-chain mode when DVDD < 4.75V.
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
______________________________________________________________________________________ 11
WORST-CASE DNL vs. TEMPERATURE
MAX5732 toc04
TEMPERATURE (°C)
DNL (LSB)
603510-15
0.05
0.10
0.15
0.20
0.25
0
-40 85
ZERO-SCALE ERROR
vs. TEMPERATURE
MAX5732 toc05
TEMPERATURE (°C)
ZERO-SCALE ERROR (mV)
603510-15
1
2
3
4
5
6
0
-40 85
VSS = -0.5V
FULL-SCALE ERROR
vs. TEMPERATURE
MAX5732 toc06
TEMPERATURE (°C)
FULL-SCALE ERROR (mV)
603510-15
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
0
-40 85
ANALOG SUPPLY CURRENT
vs. TEMPERATURE
MAX5732 toc07
TEMPERATURE (°C)
AVDD (mA)
603510-15
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9.0
8.0
-40 85
DIGITAL SUPPLY CURRENT
vs. TEMPERATURE
MAX5732 toc08
TEMPERATURE (°C)
DVDD (µA)
603510-15
51
52
53
54
55
56
57
58
59
60
50
-40 85
DVDD = +3V
ALL DIGITAL INPUTS
AT ZERO OR DVDD
DIGITAL SUPPLY CURRENT
vs. TEMPERATURE
MAX5732 toc09
TEMPERATURE (°C)
DVDD (µA)
603510-15
102
103
104
105
106
107
108
109
110
111
101
-40 85
DVDD = +5V
ALL DIGITAL INPUTS
AT ZERO OR DVDD
Typical Operating Characteristics
(AVCC = +10.5V ±5%, AVDD = +5V ±5%, DVDD = +5V, VSS = AGND = DGND = REFGND = GS = 0, VREF = +3.000V, RL= , CL =
50pF referenced to ground, output gain = 2.5, TA= TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C).
Typical Operating Characteristics (continued)
(AVCC = +10.5V ±5%, AVDD = +5V ±5%, DVDD = +5V, VSS = AGND = DGND = REFGND = GS = 0, VREF = +3.000V, RL= , CL =
50pF referenced to ground, output gain = 2.5, TA= TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C).
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
12 ______________________________________________________________________________________
LARGE-SIGNAL STEP RESPONSE
(LOW TO HIGH)
MAX5732 toc11
2µs/div
CS
5V/div
OUT_
5V/div
LARGE-SIGNAL STEP RESPONSE
(HIGH TO LOW)
MAX5732 toc12
2µs/div
CS
5V/div
OUT_
5V/div
NOISE VOLTAGE DENSITY
MAX5732 toc13
FREQUENCY (MHz)
NOISE (nV/Hz)
3.0 3.5 4.0 4.52.52.01.51.00.5
100
10
1000
1
0 5.0
MAJOR CARRY TRANSITION
(7FFFhex TO 8000hex)
MAX5732 toc14
1µs/div
OUT_
20mV/div
CS
5V/div
MAJOR CARRY TRANSITION
(8000hex TO 7FFFhex)
MAX5732 toc15
1µs/div
CS
5V/div
OUT_
20mV/div
DIGITAL FEEDTHROUGH
MAX5732 toc10
400ns/div
SCLK
5V/div
OUT_
10mV/div
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
______________________________________________________________________________________ 13
PIN
TQFN TQFP NAME FUNCTION
1, 42, 48 1, 48, 55 AVCC Output Amplifier Positive Supply Input. Bypass to VSS with a 0.1µF capacitor.
2 2 OUT9 DAC9 Buffered Analog Output Voltage
3 3 OUT8 DAC8 Buffered Analog Output Voltage
4 4 OUT7 DAC7 Buffered Analog Output Voltage
55, 15–18, 33,
34, 49, 64 N.C. No Connection. Internally connected. Do not make any connections to N.C.
6 6 OUT6 DAC6 Buffered Analog Output Voltage
7 7 OUT5 DAC5 Buffered Analog Output Voltage
8 8 OUT4 DAC4 Buffered Analog Output Voltage
9, 38 9, 44 AGND Analog Ground
10 10 OUT3 DAC3 Buffered Analog Output Voltage
11, 28, 39 11, 32, 45 VSS Output-Amplifier Negative-Supply Input
12 12 OUT2 DAC2 Buffered Analog Output Voltage
13 13 OUT1 DAC1 Buffered Analog Output Voltage
14 14 OUT0 DAC0 Buffered Analog Output Voltage
15 19 DSP Digital Serial-Interface Select Input. Drive low for DSP-interface mode. Drive high for SPI-
interface mode.
16 20 CS Active-Low Digital Chip-Select Input
17 21 DOUT D i g i tal S er i al D ata O utp ut. U se D OU T to d ai sy- chai n and r ead the contents of the D AC r eg i ster s.
18 22 SCLK Digital Serial Clock Input Clock
19 23 DIN Digital Serial Data Input
20 24 DVDD Digital Power Supply Input. Bypass to DGND with a 0.1µF capacitor.
21 25 DGND Digital Ground
22 26 LDAC Acti ve- Low D i g i tal - Load D AC Inp ut. D r i ve thi s asynchr onous i np ut l ow to tr ansfer the contents of
the i np ut r eg i ster to thei r r esp ecti ve D AC r eg i ster s and set al l D AC outp uts accor d i ng l y.
23 27 CLR Active-Low Digital-Clear Input. Drive this asynchronous input low to clear the contents of the
input and DAC registers and set all the DAC outputs to zero.
24 28 GS Ground-Sense Analog Input. Offsets the DAC amplifier outputs by ±0.5V to compensate for
a remote system ground potential difference.
25, 49 29, 56 REFGN Reference Ground
26 30 REF Analog Reference Voltage Input
27, 50 31, 57 AVDD Analog Power Supply Input. Bypass to AGND with a 0.1µF capacitor.
29 35 OUT31 DAC31 Buffered Analog Output Voltage
30 36 OUT30 DAC30 Buffered Analog Output Voltage
31 37 OUT29 DAC29 Buffered Analog Output Voltage
32 38 OUT28 DAC28 Buffered Analog Output Voltage
33 39 OUT27 DAC27 Buffered Analog Output Voltage
34 40 OUT26 DAC26 Buffered Analog Output Voltage
35 41 OUT25 DAC25 Buffered Analog Output Voltage
Pin Description
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
14 ______________________________________________________________________________________
PIN
TQFN TQFP NAME FUNCTION
36 42 OUT24 DAC24 Buffered Analog Output Voltage
37 43 OUT23 DAC23 Buffered Analog Output Voltage
40 46 OUT22 DAC22 Buffered Analog Output Voltage
41 47 OUT21 DAC21 Buffered Analog Output Voltage
43 50 OUT20 DAC20 Buffered Analog Output Voltage
44 51 OUT19 DAC19 Buffered Analog Output Voltage
45 52 OUT18 DAC18 Buffered Analog Output Voltage
46 53 OUT17 DAC17 Buffered Analog Output Voltage
47 54 OUT16 DAC16 Buffered Analog Output Voltage
51 58 OUT15 DAC15 Buffered Analog Output Voltage
52 59 OUT14 DAC14 Buffered Analog Output Voltage
53 60 OUT13 DAC13 Buffered Analog Output Voltage
54 61 OUT12 DAC12 Buffered Analog Output Voltage
55 62 OUT11 DAC11 Buffered Analog Output Voltage
56 63 OUT10 DAC10 Buffered Analog Output Voltage
EP EP E xp osed P ad d l e. Inter nal l y connected to V
S S
. C onnect exter nal l y to a m etal p ad for ther m al
d i ssi p ati on.
Pin Description (continued)
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
______________________________________________________________________________________ 15
AVDD
VSS
AGND
DVDD
DGND
AVCC
INPUT
REGISTER OFFSET DAC
DSP
CS
SCLK
REF
OFFSET
DAC
REGISTER
GS
INPUT
REGISTER
DAC31
REGISTER DAC31
INPUT
REGISTER
DAC30
REGISTER DAC30 OUT30
OUT31
AVCC
AVCC
AVCC
VSS
VSS
VSS
AVCC
VSS
AVCC
VSS
INPUT
REGISTER
DAC1
REGISTER DAC1 OUT1
INPUT
REGISTER
DAC0
REGISTER DAC0 OUT0
POWER
MANAGEMENT
INPUT
REGISTER
DAC_
REGISTER DAC_
OUT_
DOUT
LDAC
CLR
DIN
DIGITAL CONTROL LOGIC
REFGND
MAX5732–MAX5735
Figure 1. Functional Diagram
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
16 ______________________________________________________________________________________
Detailed Description
The MAX5732–MAX5735 are 32-channel, 16-bit, volt-
age-output DACs (Figure 1). The devices accept a 3V
external reference input at REF. An internal offset DAC
allows all outputs to be offset (see Table 1). The devices
provide a ground-sensing function that allows the output
voltages to be referenced to a remote ground.
A 33MHz SPI-/QSPI/-MICROWIRE- and DSP-compatible
serial interface controls the MAX5732–MAX5735 (Figure 2).
Each DAC includes a double-buffered input structure to
minimize the digital noise feedthrough from the digital
inputs to the outputs, and allows for synchronous or
asynchronous updating of the outputs. The two buffers
are organized as an input register followed by a DAC
register that stores the contents of the output. Input reg-
isters update the DAC registers independently or simul-
taneously with a single software or hardware command.
The MAX5732–MAX5735 also have a DOUT that allows
for read-back or daisy chaining multiple devices.
The MAX5732–MAX5735 analog and digital sections
have separate power inputs. Separate power inputs are
also provided for the output buffer amplifiers.
Proprietary deglitch circuits prevent output glitches at
power-up and eliminate the need for power sequenc-
ing. A software-shutdown mode allows efficient power
management. The MAX5732–MAX5735 consume 50µA
of supply current in shutdown.
All DACs provide buffered outputs that can drive 10k
in parallel with 100pF. The MAX5732 has a 0 to +5V
output range; the MAX5733 has a 0 to +10V output
range; the MAX5734 has a -2.5V to +7.5V output range;
and the MAX5735 has a -5V to +5V output range.
External Reference Input (REF)
The REF voltage sets the full-scale output voltage for all
32 DACs. REF accepts a +3V ±3% input. Reference
voltages outside these limits can result in a degradation
of device performance.
REF is a buffered input. The typical input impedance is
10M, and it does not vary with code. Use a high-
accuracy, low-noise voltage reference such as the
MAX6126AASA30 (3ppm/°C temp drift and 0.02% initial
accuracy) to improve static accuracy. REF does not
accept AC signals.
Ground Sense (GS)
The MAX5732–MAX5735 include a GS that allows the
output voltages to be referenced to a remote ground.
The GS input voltage range (VGS) is -0.5V to +0.5V.
VGS is added to the output voltage with unity gain. The
resulting output voltage must be within the valid output-
voltage range set by the power supplies. See the
Output Amplifiers (OUT0–OUT31) section for the effect
of the GS inputs on the DAC outputs.
Offset DAC
The MAX5732–MAX5735 feature an offset DAC that
determines the output voltage range. While each part
number has an output voltage range associated with it,
it is the offset DAC that determines the end-point volt-
ages of the range. Table 1 shows the offset DAC code
required during power-up.
SCLK XX 1 2 3 32 X
DIN D0C0C1C2
tCL tCH
tDH
tDS
tCS2
tCS1
tCSS
tSCS
tCSPWL
tCSPWH
CS
(DSP MODE)
CS
(µC MODE)
Figure 2. Serial-interface Timing
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
______________________________________________________________________________________ 17
Note: The offset DAC of every device can be pro-
grammed with any of the four output voltage ranges.
However, the specifications in the Electrical
Characteristics table are only guaranteed (production
tested) for the offset code associated with each partic-
ular part number. For example, the MAX5734 specifica-
tions are only valid with the MAX5734 offset- DAC code
shown in Table 1.
The offset DAC is summed with GS (Figure 1). The offset
DAC can also cancel the offset of the output buffers.
Any change in the offset DAC affects all 32 DACs.
The offset DAC is also configured identically to the
other 32 DACs with an input and DAC register. Write to
the offset DAC through the serial interface by using
control bits C2, C1, and C0 = 001 followed by the data
bits D15–D0. The CLR command affects the offset DAC
as well as the other DACs.
The data format for the offset DAC codes are: control bits
C2, C1, and C0 = 011, address bits A5–A0 = 100000, 7
don’t-care bits, and 16 data bits as shown in Table 2.
Output Amplifiers (OUT0–OUT31)
All DAC outputs are internally buffered. The internal
buffers provide gain, improved load regulation, and tran-
sition glitch suppression for the DAC outputs. The output
buffers slew at 1V/µs and can drive 10kin parallel with
100pF. The output buffers are powered by AVCC and
VSS. AVCC and VSS determine the maximum output
voltage range of the device.
The input code, the voltage reference, the offset DAC
output, the voltage on GS, and the gain of the output
amplifier determine the output voltage. Calculate VOUT
as follows:
where GAIN = 5/3 for the MAX5732, or GAIN = 10/3 for
the MAX5733/MAX5734/MAX5735.
Load-DAC (LDAC) Input
The MAX5732–MAX5735 feature an active-low LDAC
logic input that allows the outputs OUT_ to update
asynchronously. Keep LDAC high during normal opera-
tion (when the device is controlled only through the ser-
ial interface). Drive LDAC low to simultaneously update
all DAC outputs with data from their respective input
registers. Figure 3 shows the LDAC timing with respect
to OUT_.
A software command can also activate the LDAC oper-
ation. To activate LDAC by software, set control bits
VGAIN V DAC code offset DAC code V
OUT REF GS
=××
()
+
216
PART NUMBER D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
MAX5732 0000000000000000
MAX5733 0000000000000000
MAX5734 0100000000000000
MAX5735 1000000000000000
Table 1. Offset DAC Codes
OUT_
±0.5 LSB
tS
tLDAC
LDAC
Figure 3.
LDAC
Timing
Note: For the MAX5732, the maximum code for the offset DAC is 16384. For the MAX5733/MAX5734/MAX5735, the maximum code
for the offset DAC is 40000.
Table 2. Serial Data Format
CONTROL
BITS
ADDRESS
BITS
DON’T-
CARE
BITS
DATA BITS
C2, C1,
AND C0 A5–A0 D15–D0
011 100000 XXXXXXX See table 1
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
18 ______________________________________________________________________________________
C2, C1, and C0 = 010, address bits A5–A0 = 111111,
and all data bits to don’t care. See Table 3 for the data
format. This operation updates all DAC outputs.
Note: The software load DAC does not affect the offset DAC.
Clear (
CLR
)
The MAX5732–MAX5735 feature an active-low CLR
logic input that sets all channels including the offset
DAC to 0V (code 0000hex). The offset DAC needs to be
reprogrammed after CLR is asserted. Driving CLR low
clears the contents of both the input and DAC registers.
The serial interface can also issue a software clear com-
mand. Setting the control bits C2, C1, and C0 = 111
(Table 4) performs the same function as driving logic-
input CLR low. Table 4 shows the clear-data format for
the software-controlled clear command. This register-
reset process cannot be interrupted. All serial input data
is ignored until the entire reset process is complete.
Serial Interface
A 3-wire SPI-/QSPI-/MICROWIRE- and DSP-compatible
serial interface controls the MAX5732–MAX5735. The
interface requires a 32-bit command word to control the
device. The command word consists of 3 control bits, 6
address bits, 7 don’t-care bits, and 16 data bits. Table 5
shows the general serial-data format. The control bits
control various write and read commands as well as the
load DAC and clear commands. Table 6 shows the con-
trol-bit functions. The address bits select the register(s)
to be written. Table 7 shows the address functions. The
data bits control the value of the DAC outputs.
Table 3. Load-DAC Data Format
CONTROL
BITS
ADDRESS
BITS
DON’T-
CARE
BITS
DATA BITS
C2, C1,
AND C0 A5–A0 D15–D0
010 111111 XXXXXXX XXXXXXXXXXXXXXXX
Table 4. Clear-Data Format
CONTROL
BITS
ADDRESS
BITS
DON’T-
CARE
BITS
DATA BITS
C2, C1,
AND C0 A5–A0 D15–D0
111 See table 7 XXXXXXX XXXXXXXXXXXXXXXX
Table 5. Serial-Data Format
CONTROL
BITS
ADDRESS
BITS
DON’T-
CARE
BITS
DATA BITS
MSB LSB
C2, C1,
and C0 A5–A0 XXXXXXX D15–D0
Table 6. Control-Bit Functions
CONTROL
BITS
C2 C1 C0
CONTROL-BIT DESCRIPTION
000
No operation (NOP); no internal registers
change state. The NOP command can be
passed to DOUT depending on the state of the
configuration register. Address bits A5–A0 and
data bits D15–D0 are ignored.
001
Loads D15–D0 into the input register(s) for the
selected address. Depending on the address
bits, this command could write to:
The configuration register (A[5:0] = 100001)
One of the i np ut r eg i ster s of the 32 D AC channel s
All 32 DAC input registers (A[5:0] = 111111)
The offset D AC i np ut r eg i ster ( A[ 5:0] = 100000)
010
Loads DAC register(s) from the input register(s).
Depending on the address bits, this command
can update one or all of the DAC registers from
the stored input register value(s). Data bits
D15–D0 are ignored.
011
Write-through; loads D15–D0 into the input and
DAC registers, depending on the address bits.
100
Read command; depending on the address bits,
one of the DAC-register values or the
configuration-register value may be read back
through DOUT. Data bits D15–D0 are ignored.
1 0 1 Reserved for internal testing; do not use.
1 1 0 Reserved for internal testing; do not use.
111
C l ear r eg i ster ( s) ; d ep end i ng on the ad d r ess b i ts,
one or al l r eg i ster s ( excep t the offset- D AC r eg i ster s)
ar e cl ear ed to zer o. D ata b i ts D 15–D 0 ar e i g nor ed .
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
______________________________________________________________________________________ 19
Table 7. Address-Bit Functions
ADDRESS BITS
A5 A4 A3 A2 A1 A0 CONTROL FUNCTION
0 0 0 0 0 0 DAC0
0 0 0 0 0 1 DAC1
0 0 0 0 1 0 DAC2
0 0 0 0 1 1 DAC3
0 0 0 1 0 0 DAC4
0 0 0 1 0 1 DAC5
0 0 0 1 1 0 DAC6
0 0 0 1 1 1 DAC7
0 0 1 0 0 0 DAC8
0 0 1 0 0 1 DAC9
0 0 1 0 1 0 DAC10
0 0 1 0 1 1 DAC11
0 0 1 1 0 0 DAC12
0 0 1 1 0 1 DAC13
0 0 1 1 1 0 DAC14
0 0 1 1 1 1 DAC15
0 1 0 0 0 0 DAC16
0 1 0 0 0 1 DAC17
0 1 0 0 1 0 DAC18
0 1 0 0 1 1 DAC19
0 1 0 1 0 0 DAC20
0 1 0 1 0 1 DAC21
0 1 0 1 1 0 DAC22
0 1 0 1 1 1 DAC23
0 1 1 0 0 0 DAC24
0 1 1 0 0 1 DAC25
0 1 1 0 1 0 DAC26
0 1 1 0 1 1 DAC27
0 1 1 1 0 0 DAC28
0 1 1 1 0 1 DAC29
0 1 1 1 1 0 DAC30
0 1 1 1 1 1 DAC31
1 0 0 0 0 0 Offset DAC
100001
C onfi g ur ati on r eg i ster ; contr ol
b i ts C 2, C 1, and C 0 = 010 and
C 2, C 1, and C 0 = 011 set the er r or
fl ag i n the confi g ur ati on r eg i ster .
D o not use these contr ol b i ts w i th
these ad d r ess b i ts.
ADDRESS BITS
A5 A4 A3 A2 A1 A0 CONTROL FUNCTION
100010C om m and r eser ved ; d o not use.
100011C om m and r eser ved ; d o not use.
100100C om m and r eser ved ; d o not use.
100101C om m and r eser ved ; d o not use.
100110C om m and r eser ved ; d o not use.
100111C om m and r eser ved ; d o not use.
101000C om m and r eser ved ; d o not use.
101001C om m and r eser ved ; d o not use.
101010C om m and r eser ved ; d o not use.
101011C om m and r eser ved ; d o not use.
101100C om m and r eser ved ; d o not use.
101101C om m and r eser ved ; d o not use.
101110C om m and r eser ved ; d o not use.
101111C om m and r eser ved ; d o not use.
110000C om m and r eser ved ; d o not use.
110001C om m and r eser ved ; d o not use.
110010C om m and r eser ved ; d o not use.
110011C om m and r eser ved ; d o not use.
110100C om m and r eser ved ; d o not use.
110101C om m and r eser ved ; d o not use.
110110C om m and r eser ved ; d o not use.
110111C om m and r eser ved ; d o not use.
111000C om m and r eser ved ; d o not use.
111001C om m and r eser ved ; d o not use.
111010C om m and r eser ved ; d o not use.
111011C om m and r eser ved ; d o not use.
111100C om m and r eser ved ; d o not use.
111101C om m and r eser ved ; d o not use.
111110C om m and r eser ved ; d o not use.
111111
All channels (DAC31–DAC0);
used for write commands only.
Read commands cannot be
used with these address bits.
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
20 ______________________________________________________________________________________
DSP Mode (
DSP
)
The MAX5732–MAX5735 provide a hardware-selectable
DSP-interface mode. DSP mode, when active, allows
chip select (CS) to go high before the entire 32-bit com-
mand word is clocked in. The active-low DSP logic input
selects microcontroller (µC)- or DSP-interface mode.
Drive DSP low for DSP-interface mode. Drive DSP high
for µC-interface mode. Figure 2 illustrates serial timing
for both µC- and DSP-interface modes.
Configuration Register
The configuration register controls the advanced fea-
tures of the MAX5732–MAX5735. Write to the configura-
tion register by setting the control bits C2, C1, and C0
= 001 and address bits A5–A0 = 100001. Table 8
shows the configuration-register data format for the
D15–D0 data bits. Table 9 shows the commands con-
trolled by the configuration register.
Table 9. Configuration-Register Commands
DATA BIT NAME DESCRIPTION
D15 ERRF
Error flag; ERRF goes logic-high when an invalid command is attempted. ERRF is cleared each
time the configuration register is read back to DOUT. Clear-register commands C2, C1, and C0 =
111 resets ERRF. Conditions that trigger ERRF include:
Attempted read of address bits A5–A0 = 111111 (all 32 DACs)
Access to reserved addresses
Access to the configuration register (address bits A5–A0 = 100001 when used with control bits
C2, C1, and C0 = 010 and 011)
Default is logic-low (no error flags); ERRF is read only.
D14 SING
Single device; SING determines the manner in which data is output to DOUT. A logic-high sets the
device to operate in stand-alone mode or in parallel; only the 16 data bits are output to DOUT. A
logic-low sets the device to operate in a daisy chain of devices. In this case, the entire 32-bit
command word is output to DOUT.
Default is logic-low (daisy-chain mode); SING is read/write.
D13 GLT
Glitch-suppression enable; the MAX5732–MAX5735 feature glitch-suppression circuitry on the
analog outputs that minimizes the output glitch during a major carry transition. A logic-low disables
the internal glitch-suppression circuitry, which improves settling time. A logic-high enables glitch-
suppression, suppressing up to 120nV-s glitch impulse on the DAC outputs.
Default is logic-low (glitch suppression disabled); GLT is read/write.
D12 DT
Digital output enable; a logic-low enables DOUT. A logic-high disables DOUT. Disabling DOUT
reduces power consumption and digital noise feedthrough to the DAC outputs from the DOUT
output buffer.
Default is logic-low (DOUT enabled); DT is read/write.
D11 SHDN
Shutdown; a logic-high shuts down all 32 DACs. The logic interface remains active, and the data is
retained in the input and DAC registers. Read/write operations can be performed while the device
is disabled; however, no changes can occur at the device outputs. A logic-low powers up all 32
DACs if the device was previously in shutdown. Upon waking up, the DAC outputs return to the last
stored value in the DAC registers. Default is logic-low (normal operation); SHDN is read/write.
D10–D0 X Don’t care.
Table 8. Configuration-Register Data Format
16 DATA BITS
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
ERRF SING GLT DT SHDN XXXXXXXXXXX
X = Don’t care.
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
______________________________________________________________________________________ 21
SING
When SING = 0 (default power-up mode), the device is
in daisy-chain mode. DOUT follows DIN after 32 clock
cycles. For the read command, DOUT provides the
read data in the next cycle following CS rising edge.
The 16 data bits of the previous command word are
clocked out on the last 16 clock cycles of the current
command word.
When SING = 1, the device is in stand-alone mode. To
reduce the time it takes to read data out, the read data is
provided at DOUT as the 16 data bits of the current com-
mand are clocked in. The device acts on an incoming
command word independent of the rising edge of CS.
Daisy Chain Operation
Any number of the MAX5732–MAX5735 devices can be
daisy chained by connecting the DOUT of one device
to the DIN of another device in a chain. All devices
must be in SING = 0 mode. Connecting the CS inputs
of all devices together eliminates the need to issue
NOP commands to devices early in the chain (see
Figure 4). The maximum clock frequency (fSCLK) is
10MHz when DVDD < +4.75V.
Data Readback
The contents of the MAX5732–MAX5735 DAC and con-
figuration registers can be read on DOUT by issuing a
read-data command. Setting control bits C2, C1, and
C0 = 100, puts the device in read-data mode. The
address bits select the register to be read. The con-
tents of the register (16 data bits) are clocked out at
DOUT. The output-data format depends on the status of
DSP and SING. Table 10 shows the manner in which
data is written to DOUT. Note that when the device is in
DSP mode (DSP = 0), only the 16-bit data of the selected
register is written to DOUT.
Table 10. Read-Data Modes with SING and DSP Controls
DSP SING CONFIGURATION
DESCRIPTION READ DATA AT DOUT
0 0 Stand alone
DOUT provides the 16 data bits from the previous command word. Data
appears at DOUT on the last 16 clock edges of the current command word.
See Figure 7.
0 1 Stand alone D OU T p r ovi d es the 16 d ata b i ts fr om the cur r ent com m and w or d . D ata ap p ear s at
D OU T on the l ast 16 cl ock ed g es of the cur r ent com m and w or d . S ee Fi g ur e 7.
1 0 Daisy chain
Data on DOUT follows the current command word after 32 clock cycles. For
read commands, the read data from the previous command word appears at
DOUT on the last 16 clock edges of the current command word. See Figure 4.
11
Multiple DOUTs connected
in parallel (not daisy
chained)
DOUT provides the 16 data bits from the current command word. Data appears
at DOUT on the last 16 clock edges of the current command word. For read
commands, the read data from the current command word appears at DOUT
on the last 16 clock edges of the current command word. See Figures 8 and 9.
CONTROLLER
DEVICE
DIN(0)
DOUT(0)
1
SCLK
CS
DSP
MAX573_
DIN(1)
DOUT(1)
SCLK
CS
DSP
MAX573_
DIN(2)
DOUT(2)
SCLK
CS
DSP
MAX573_
Figure 4. Daisy-Chain Configuration
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
22 ______________________________________________________________________________________
W WD2 W WD1 WWD0 R XX R XX R XX X XX X XX X XXDIN(0)
CS
DOUT(0) WD1WWD2WXXRXXRWD0W R RD0 X XX X XX
DOUT(1) W WD2 W WD1 W WD0 R XX R RD1 R RD0 X XX
DOUT(2) W WD2 W WD1 W WD0 R RD2 R RD1 R RD0
W WD2 R XX WWD0 R XX W WD1 R XX X XX X XX X XXDIN(0)
CS
DOUT(0) XXRWD2W WD1WXXRWD0W R RD0 X XX X XX
DOUT(1) W WD2 R RD1 W WD0 R XX W WD1 R RD0 X XX
DOUT(2) W WD2 R RD1 W WD0 R RD2 W WD1 R RD0
Figure 5. Example 1 of a Daisy-Chain Data Sequence
W/WD0 = 32-bit word with a write command; WD0 writes data for device 0. The 0 refers to the position in the daisy chain (0 is closest
to the bus master). Devices 1 and 2 are devices further down the chain.
R/RD2 = 32-bit word with a read command; RD2 reads data from device 2.
X = Don’t care (for X in the data or command position).
Figure 6. Example 2 of a Daisy-Chain Data Sequence
W/WD0 = 32-bit word with a write command; WD0 writes data for device 0. The 0 refers to the position in the daisy chain (0 is closest
to the bus master). Devices 1 and 2 are devices further down the chain.
R/RD2 = 32-bit word with a read command; RD2 reads data from device 2.
X = Don’t care (for X in the data or command position).
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
______________________________________________________________________________________ 23
Read-Data Format
The MAX5732–MAX5735 support daisy-chain connec-
tions of multiple devices. The default (power-up) config-
uration for the MAX5732–MAX5735 assumes that the
device may be part of a daisy chain of devices. DOUT
follows DIN after 32 clock cycles. For a read command,
DOUT provides read data (instead of the data value
shifted in) in the next cycle following a CS rising edge.
Figures 5 and 6 show examples of daisy-chain
data sequences.
Shutdown Mode
The MAX5732–MAX5735 feature a software-controlled
low-power shutdown mode. When bit 11 of the configu-
ration register is a logic high, the analog section of the
device is disabled, and the outputs go high impedance.
In shutdown, supply current is reduced to 50µA. Data
stored in the DAC and input registers is retained, and
the device outputs return to their previous values when
the device is brought out of shutdown. The serial inter-
face remains active while the device is in shutdown.
Power-Up State
The MAX5732–MAX5735 monitor the four power supplies
and maintain the output buffers in a known state until suffi-
cient voltage is available to ensure that no output glitches
occur. Once the minimum voltage threshold has been
passed, the device outputs come up in the clear state (all
outputs = 0). For proper power sequencing, VSS must be
applied first. Power sequencing is not necessary if VSS is
connected to AGND.
CONTROLLER
DEVICE
DIN
DOUT
1 OR 0
SCLK
CS
MAX573_
DSP
Figure 7. Stand-Alone Configuration
CONTROLLER
DEVICE
DIN
DOUT
1 OR 0
1 OR 0
1 OR 0
SCLK
CS
MAX573_
DIN
DOUT
SCLK
CS
MAX573_
DIN
DOUT
SCLK
CS
MAX573_
DSP
DSP
DSP
Figure 8. Example of a Parallel Configuration with Read-Back
C1C2 C0 A5 A4 A3 A2 A1 A0 Sp Sp Sp Sp Sp Sp Sp D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
DIN(0)
SCLK
CS (µC)
CS (DSP)
DOUT(0)
OR
Figure 9. Read Data Timing When Not Daisy Chained
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
24 ______________________________________________________________________________________
Applications Information
MEMS Micromirror Control
The MAX5732/MAX5733 are the highest resolution 32-
channel DACs available in the smallest footprint, mak-
ing the devices ideal for optical MEMS mirror control
(Figure 10). A high-resolution DAC forms the core ana-
log block for controlling the X and Y position of the mir-
ror. As the density of the optical cross-connects
increases, the number of DAC channels also increases.
By offering the highest resolution and the greatest den-
sity, the MAX5732/MAX5733 improve performance and
reduce the board footprint.
Automatic Test Equipment (ATE)
Applications
The MAX5734 includes many features suited for ATE
applications. The device is the most compact level-set-
ting solution available for high-density pin electronics
boards. The MAX5734 provides a -2.5V to +7.5V output
voltage range (required by most ATE applications).
The offset DAC simultaneously adjusts the voltage
range of all 32 DACs, allowing optimization to the appli-
cation. The remote-sense feature allows the pin elec-
tronic voltages to be referenced to the ground potential
at the DUT site.
The B grade linearity error of ±2.44mV (max) is more than
sufficient for most ATE applications. The A grade device
cuts this error to ±1.22mV (max) for higher accuracy.
The pipelined register architecture allows all 32 DACs
to be updated simultaneously. This is valuable during
test setups, as all values in the tester can be set and
then updated in unison with a single command. This
feature can be accessed through the serial port or the
LDAC input.
The low output noise of the MAX5734 allows direct con-
nection to the pin electronics, eliminating the cost and
PC board area of external filtering.
Modern pin electronics integrated circuits (PEICs) are
typically fabricated on high-speed processes with low
breakdown voltages. Some devices require external
ADC
MAX5732
MAX5733
DAC0
HVDRV0
HVDRV31
DAC31
14 TO 16 BITS
VOLTAGE
REFERENCE
VOLTAGE
REFERENCE
DSP
CONTROL
ALGORITHM
POSITION OR
OPTICAL
FEEDBACK
PGA OR
FIXED GAIN AMPS
MEMS MIRRORS WITH
X AND Y CONTROL
THIN-FILM FILTER OR
PLANAR LIGHT WAVE
SEPARATORS
WITH OPTICAL
LENSES
MEMS
MIRRORS WITH
X AND Y
CONTROL
DWDM
PIPE
OPTICAL LENSES
AND COLLIMATORS
14 TO 16 BITS
DWDM
PIPE
Figure 10. MEMS Mirror Control
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
______________________________________________________________________________________ 25
protection on their reference inputs to satisfy absolute
maximum ratings. The MAX5734 features outputs that
are almost rail-to-rail. This allows the AVCC and VSS
supplies to be set to voltages within the absolute maxi-
mum ratings of the PEIC. This guarantees that the PEIC
is protected in all situations.
Additional protection is provided by the MAX5734
glitch-free power-up into the clear state with all DAC
outputs set to approximately 0V. Either the serial port or
the CLR input can assert the clear function.
Power Supplies, Bypassing,
Decoupling, and Layout
Grounding and power-supply decoupling strongly influ-
ence device performance. Digital signals can couple
through the reference input, power supplies, and ground
connection. Proper grounding and layout can reduce
digital feedthrough and crosstalk. Bypass all power sup-
plies with an additional 0.1µF and 1µF on each pin, as
close to the device as possible. Refer to the MAX5732–
MAX5735 evaluation kit for a suggested layout.
The MAX5732–MAX5735 have four separate power
supplies. AVDD powers the internal analog circuitry
(except for the output buffers) and DVDD powers the
digital section of the device. AVCC and VSS power the
output buffers.
The MAX5732–MAX5735 feature an exposed paddle on
the backside of the package for improved power dissi-
pation. The exposed paddle is electrically connected to
VSS, and should be soldered to a large copper plane
that shares the same potential. For more information on
the exposed paddle QFN package, refer to the following
website: http://pdfserv.maxim-ic.com/arpdf/AppNotes/
4hfan081.pdf
5859606162 5455565763
38
39
40
41
42
43
44
45
46
47
VSS
DSP
OUT10
TQFP
TOP VIEW
OUT11
OUT12
OUT13
OUT14
OUT15
AVDD
REFGND
AVCC
OUT16
5253 49
5051
OUT17
OUT18
OUT19
OUT20
N.C.
N.C.
DOUT
CS
DIN
SCLK
DGND
DVDD
CLR
LDAC
REFGND
GS
AVDD
REF
VSS
OUT21
OUT22
VSS
AGND
OUT23
OUT24
OUT25
OUT26
OUT27
OUT28
33
34
35
36
37 OUT29
OUT30
OUT31
N.C.
N.C.
OUT3
AGND
OUT4
OUT5
OUT6
N.C.
N.C.
OUT0
OUT1
OUT2
N.C.
OUT7
OUT8
OUT9
48 AVCC
AVCC
64
N.C.
N.C.
2322212019 2726252418 2928 32313017
11
10
9
8
7
6
5
4
3
2
16
15
14
13
12
1
MAX5732–MAX5735
Pin Configurations (continued) Chip Information
TRANSISTOR COUNT: 152,000
PROCESS: BiCMOS
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
26 ______________________________________________________________________________________
Note: All devices operate over the 0°C to +85°C temperature
range.
*EP = Exposed pad (internally connected to VSS).
**Future product—contact factory for availability.
Ordering Information (continued)
PART
OUTPUT
VOLTAGE
(V)
MAX
INL
(LSB)
PIN-
PACKAGE
PKG
CODE
MAX5732AUCB** 0 to +5 ±8 64 TQFP C64-8
MAX5732BUCB** 0 to +5 ±16 64 TQFP C64-8
MAX5733AUTN 0 to +10 ±8 56 Thin
QFN-EP* T5688-3
MAX5733BUTN 0 to +10 ±16 56 Thin
QFN-EP* T5688-3
MAX5733AUCB** 0 to +10 ±8 64 TQFP C64-8
MAX5733BUCB** 0 to +10 ±16 64 TQFP C64-8
MAX5734AUTN -2.5 to
+7.5 ±8 56 Thin
QFN-EP* T5688-3
MAX5734BUTN -2.5 to
+7.5 ±16 56 Thin
QFN-EP* T5688-3
MAX5734AUCB** -2.5 to
+7.5 ±8 64 TQFP C64-8
MAX5734BUCB** -2.5 to
+7.5 ±16 64 TQFP C64-8
MAX5735AUTN -5 to +5 ±8 56 Thin
QFN-EP* T5688-3
MAX5735BUTN -5 to +5 ±16 56 Thin
QFN-EP* T5688-3
MAX5735AUCB** -5 to +5 ±8 64 TQFP C64-8
MAX5735BUCB** -5 to +5 ±16 64 TQFP C64-8
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
______________________________________________________________________________________ 27
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
56L THIN QFN.EPS
PACKAGE OUTLINE
21-0135
2
1
E
56L THIN QFN, 8x8x0.8mm
PACKAGE OUTLINE
21-0135
2
2
E
56L THIN QFN, 8x8x0.8mm
MAX5732–MAX5735
32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
28 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2005 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products, Inc.
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
64L, 10x10x1.4 TQFP.EPS