Document No TRH-XX0S001A
Issued date 2003/09/30
Thick Film High Voltage Chip
Resistors (Standard )
Page 4/8
TA-I TECHNOLOGY CO., LTD
6. Reliability Tests:(As specified in JIS C 5202)
Test Items Reference
standard Condition of Test Test Limits
Visual examination Checked by visual examination . The marking shall be legible ,
as checked by visual
examination
Temperature Coefficient of
Resistance JIS-C5202-5.2 -55 ~ +125 ℃ Refer to paragraph 5
Dielectric Withstanding Voltage
( Voltage Proof ) JIS-C5202-5.7 500Va. c., voltage , 1 min . No abnormalities such as
flashover , burning dielectric
breakdown shall appear .
Insulation Resistance JIS-C5202-5.6 100V voltage , 1 min . ≧1GΩ
Solderability JIS-C5202-6.11 235 ±5℃ solder, 2 ±0.5 sec dwell. At least 95% of surface area
of electrode shall be covered
with new solder.
Short Time Overload JIS-C5202-5.5
1206 :
2.5 × rated voltage, 5s
2010 :
2.0 X rated voltage, 2s
DC : 3000 V Max , AC (RMS) : 2122V Max
Test Substrate : pitch 10.16 mm
±1%+0.05Ω
Resistance to Soldering Heat JIS-C5202-6.10 270 ±5℃ solder , 10 ±1 sec dwell . ±1%+0.05Ω
Rapid Change of Temperature JIS-C5202-7.4 -55℃ (30 min. ) / +125 ℃(30 min. ) 5 cycles ±1%+0.05Ω
Load Life JIS-C5202-7.10 1000 hours at rated power , 70℃ , 1.5hours
“ON “, 0.5hour “OFF” ±5%+0.1Ω
Solubility resistance JIS-C5202-6.9 Ultrasonic for 1 minute
Solvent : isopropyl alcohol Marking shall be legible.
7. Marking
7.1
±
5%(E24)
Resistance value is expressed by 3 digits, the first two digits represent the
significant figures of nominal resistance value inΩ, and the third digit
represents exponent for base of 10.
Ex. 106 =10×106=10000000Ω=10MΩ