109LBB063M2DG a SNAP-IN/ SNAP MOUNT Parts are RoHS compliant Date code when parts became RoHS: 26 ELECTRICAL SPECIFICATIONS Capacitance: 10000 uF Tolerance: -20 %, +20 % Dissipation Factor: 0.15 Max at 120 Hz and 20C WVDC: 63 Volts DC Temperature Range: -40C to +85C SVDC: 79 Volts DC Impedance: N/A Ripple Current: 3.72 A at 120 Hz and 85C Impedance Ratios:-25C/20C 2 and -A0C/20C - 6 Leakage Current: .02CV or 3000UA, whichever is less 3000 uA after 5 Minutes Load Life: 3000 hours at 65C with 100 % of rated voltage and with 100 % of rated ripple current Capacitance Change: =20% of initial measured value Dissipation Factor: =200% of maximum specified value Leakage Current: 100% of maximum specified value Frequency Multipliers: Temperature Multipliers: 50 HZ 120 HZ 400 HZ 1KHZ 10 KHZ 100 KHZ 45C 60C 70C 65C 75C 85C 105C 125C 0.9 q 7 71.15 1.25 1.25 25 (22 |2 21 ee |aat \F Oo PHYSICAL DIMENSIONS Diameter (D): 30 mm + 1 mm Lead Wire Diameter (d): 1.5 mm +/- 0.5 mm Length (L): 45 mm + 2 mm Lead Length: 4 mm +/- .5 mm Lead Spacing (5): 10 mm +/- 0.1 mm Lead Finish: Matte Tin Coating: BlackPET sleeving P.C. veuran <b> = seis yy Specifications }' 4 10.0 40:1 + = 1 ie (Ta 4 | " 4s }_ L__+ 4mm +/-Imm Case Vent Insulator Sleeve 3757 W. Touhy Ave. Lincolnwood, IL 60712 (847) 675-1760 FAX (847) 673-2850 a co Illinois Capacitor (HK) Ltd_, Tel: 65227930931, Fax: 65227930731, www.illcap.com.hk ILLINOIS CAPACITOR Copyright 2019 Illinois Capacitor. An affiliate of Cornell Dubilier, All Rights Reserved