Signal lamps Page Signal lamps with integrated LED Signal lamps with integrated LED - 5 mm Signal lamps with integrated LED - 7.0 mm Signal lamps with integrated LED - 9.1 mm Signal lamps with integrated LED - 10 mm RF 15 - Signal indicator RF 19 - Signal indicator RG 85 III - Signal indicator, without lens 3-3 3-4 3-8 3 - 10 3 - 12 3 - 16 3 - 18 3 - 22 Signal lamps with integrated lamp Signal lamps with integrated filament lamp - 5 mm Signal lamps with integrated filament/neon lamp - 7 mm Signal lamps with integrated filament/neon lamp - 10 mm Signal lamps with integrated filament/neon lamp - 14 mm 3 - 25 3 - 26 3 - 28 3 - 30 3 - 36 Signal lamps with lamp socket 8 mm Series - Signal lamp Signal lamps with lamp socket - W 2 x 4.6d, 9.1 mm Signal lamps with lamp socket - T 4.6, 9.1 mm Signal lamps with lamp socket - W 2x4.6d, 11.1 mm Signal lamps with lamp socket - BA 9s (MBC/MCC), 16.2 mm Signal lamps with lamp socket - E 10 (MES), 16.2 mm LUMOTAST FK - Signal lamp LUMOTAST 25 - Signal lamp LUMOTAST 75 IP40 - Signal lamp with lamp socket T 4.5 LUMOTAST 75 IP65 - Signal lamp RAFIX 16 - Signal indicator RAFIX 16 F - Signal indicator Signal lamps with lamp socket - BA 9s (MBC/MCC), 18.2 mm Signal lamps with lamp socket - E 14, 22.3 mm RAFIX 22 QR - Signal indicator RAFIX 22 FS - Signal indicator Signal lamps with lamp socket - E 14, 30.5 mm Signal lamps with lamp socket - BA 15d, 30.5 mm 3 - 39 3 - 42 3 - 44 3 - 46 3 - 48 3 - 50 3 - 52 3 - 56 3 - 60 3 - 64 3 - 68 3 - 74 3 - 80 3 - 84 3 - 86 3 - 88 3 - 92 3 - 96 3 - 98 Panel mounting sockets Panel mounting sockets - W 2 x 4.6d Panel mounting sockets - Tubular lamp holders Panel mounting sockets - BA 15d Signal lamps 3 - 101 3 - 102 3 - 104 3 - 106 3-1 3 Signal lamps General information Standard mounting dimensions We recommend use of mounting hole diameters 16, 22 and 30 mm, as these comply with international standard recommendations and DIN standards. Signal Lamps with integral lamps/LED The soldered lamps/LED without base cannot be replaced. Signal Lamps with lamp socket An integral lamp socket allows replacement of lamps/LED of the appropriate type. Limit values The voltage specified as the limit value is the standard insulating voltage for the signal lamps. The permitted ambient temperatures are always specified in conjunction with the maximum power of the lamps used, and the signal lamp should be located outside of the space subject to increased temperature. Filament operating life Operating life specifications refer to AC voltage operation. If operated with DC voltage, these values are reduced by 40%. Color and lenses transparent = clear, grooved on inner surface for better light diffusion opaque = translucent but not clear 3 Neon lamps Neon lamps may glow on a short time after having been switched off, for example in combination with long wires. To avoid this, a parallel resistor with 1,2 M 1/4 W, can be used. Engraving and Hot Stamping Custom-made legend inserts, photographic film inserts or customer-specific inserts. Standard font DIN 30 640, thin type setting A or narrow-spaced semi-bold type E, however, with rounded ends of characters. Type size* in mm Line thickness in mm Standard colour combinations 3 0,35 transparent: 4 0,5 5 0,6 colourless and red yellow, green, blue 6 0,7 opaque: 8 0,8 10 1 black and dark grey white, red, yellow, green blue and light grey 12,5 1,2 Lens colour Legend white white white black black *The selected type size depends on text length and lens size. 3-2 Signal lamps Signal lamps with integrated LED General Data Signal lamps with integral LED, mounting hole diameter from 5 to 10 mm. The mm specification in the product name indicates the appropriate mounting hole diameter of the signal lamps. 3 Content Signal lamps with integrated LED - 5 mm Signal lamps with integrated LED - 5 mm, protruding LED Signal lamps with integrated LED - 5 mm, round protruding lens Signal lamps with integrated LED - 5 mm, round flush lens Signal lamps with integrated LED - 5 mm, triangular flush lens 3-4 3-5 3-5 3-6 3-7 Signal lamps with integrated LED - 7.0 mm Signal lamps with integrated LED - 7.0 mm, round protruding lens 3-8 3-8 Signal lamps with integrated LED - 9.1 mm Signal lamps with integrated LED - 9.1 mm, round lens Signal lamps with integrated LED - 9.1 mm, round protruding lens 3 - 10 3 - 11 3 - 11 Signal lamps with integrated LED - 10 mm Signal lamps with integrated LED - 10 mm, protruding LED Signal lamps with integrated LED - 10 mm, round lens 3 - 12 3 - 13 3 - 14 RF 15 - Signal indicator RF 15 - Signal indicator, fully illuminated, 1 LED 3 - 16 3 - 17 RF 19 - Signal indicator RF 19 - Signal indicator, 1/2 x 1-module RF 19 - Signal indicator, 1/2 x 2-module RF 19 - Signal indicator, 1 x 1-module RF 19 - Signal indicator, 1 x 2-module 3 - 18 3 - 19 3 - 19 3 - 20 3 - 20 RG 85 III - Signal indicator, without lens RG 85 III - Signal indicator, without lens 3 - 22 3 - 23 Signal lamps 3-3 integr. LED Signal lamps with integrated LED Signal lamps with integrated LED - 5 mm Pict.: red red Mounting hole Technical Data 3 integr. LED General information Form of lens Colour of lens Diameter of collar see order block see order block see order block Dimensions Length of collar Overall height Mounting depth Mounting hole see order block see order block see order block 5 mm Mechanical design Mounting Terminals Lamp socket Lamp pressing into hole solder terminals no see order block Electrical characteristics Operating voltage UB Integrated currency resistor Forward voltage UF at 25 C Reverse voltage UR at 25 C Forward current, IF at 25 C Reverse current IR at 25 C Power dissipation Ptot at 25 C Other specifications Degree of protection from front side Weight see order block see order block at 10 mA forward current 2.2 V 3V see order block 100 A max. 120 mW IP40 0.35 g Operating voltage UB: DC voltage from 5 to 28 V A suitable series resistor is installed in the unit; versions without series resistor must be fitted with an external one. External resistor: RV= (UB - UF):IF Recommended ratings of external resistors: - for 5 - 7 V = 330 7 0.25 W - for 12 - 16 V = 1.1 k7 0.25 W - for 24 - 28 V = 2.4 k7 0.5 W 3-4 Signal lamps Signal lamps with integrated LED Signal lamps with integrated LED - 5 mm, protruding LED Pict.: red Mounting hole Integrated currency resistor Operating voltage UB Forward current, IF at 25 C Lamp Colour of lens Order no. yes 24 - 28 V 8 - 12 mA LED red transparent red 1.69.508.804/0000 yes 24 - 28 V 8 - 12 mA LED green transparent green 1.69.508.810/0000 yes 24 - 28 V 8 - 12 mA LED yellow transparent yellow 1.69.508.816/0000 Technical data see page 3 - 4 Long terminal is anode. 3 Signal lamps with integrated LED - 5 mm, round protruding lens integr. LED Pict.: yellow Mounting hole Integrated currency resistor Operating voltage UB no Lamp Colour of lens Order no. LED green transparent green 1.69.508.837/1503 LED yellow transparent yellow 1.69.508.843/1402 yes according to series max. 20 mA resistor 5 - 28 V according to series max. 20 mA resistor 5 - 28 V 24 - 28 V 8 - 12 mA LED red transparent red 1.69.508.834/1301 yes 24 - 28 V 8 - 12 mA LED green transparent green 1.69.508.840/1503 yes 24 - 28 V 8 - 12 mA LED yellow transparent yellow 1.69.508.846/1402 yes 24 - 28 V 8 - 12 mA transparent red yes 24 - 28 V 8 - 12 mA LED super bright red LED super bright yellow no Forward current, IF at 25 C 1.69.508.835/1300 transparent yellow 1.69.508.847/1400 Technical data see page 3 - 4 Long terminal is anode. Signal lamps Stock items are marked by bold printed order numbers. 3-5 Signal lamps with integrated LED Signal lamps with integrated LED - 5 mm, round flush lens Pict.: green Operating voltage UB Forward current, IF at 25 C Lamp Colour of lens Order no. no max. 20 mA LED red transparent red 1.69.508.861/1301 max. 20 mA LED green transparent green 1.69.508.867/1503 max. 20 mA LED yellow transparent yellow 1.69.508.873/1402 yes according to series resistor 5 - 28 V according to series resistor 5 - 28 V according to series resistor 5 - 28 V 24 - 28 V 8 - 12 mA LED red transparent red 1.69.508.864/1301 yes 24 - 28 V 8 - 12 mA LED green transparent green 1.69.508.870/1503 yes 24 - 28 V 8 - 12 mA LED yellow transparent yellow 1.69.508.876/1402 yes 24 - 28 V 8 - 12 mA transparent red yes 24 - 28 V 8 - 12 mA LED super bright red LED super bright yellow no no 3 Mounting hole Integrated currency resistor 1.69.508.865/1300 transparent yellow 1.69.508.877/1400 Technical data see page 3 - 4 integr. LED Long terminal is anode. * Without series resistor, mounting depth = 18 mm 3-6 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with integrated LED Signal lamps with integrated LED - 5 mm, triangular flush lens Pict.: red Integrated currency resistor Operating voltage UB Forward current, IF at 25 C Lamp Colour of lens Order no. yes 24 - 28 V 8 - 12 mA LED red transparent red 1.69.508.934/1301 yes 24 - 28 V 8 - 12 mA LED green transparent green 1.69.508.940/1503 yes 24 - 28 V 8 - 12 mA LED yellow transparent yellow 1.69.508.946/1402 yes 24 - 28 V 8 - 12 mA transparent red yes 24 - 28 V 8 - 12 mA LED super bright red LED super bright yellow 1.69.508.935/1300 transparent yellow 1.69.508.947/1400 Technical data see page 3 - 4 3 Long terminal is anode. * Without series resistor, mounting depth = 18 mm integr. LED Signal lamps Stock items are marked by bold printed order numbers. 3-7 Signal lamps with integrated LED Signal lamps with integrated LED - 7.0 mm Pict.: yellow Mounting hole Technical Data General information Form of lens Colour of lens Diameter of collar 3 round protruding see order block 8.5 mm Electrical characteristics Operating voltage UB Forward voltage UF at 25 C Reverse current IR at 25 C Forward current, IF Reverse current IR at 25 C Power dissipation Ptot at 25 C Light intensity Dimensions Overall height Mounting depth Mounting hole 5 mm 27.5 mm 7.0 mm Mechanical design Mounting Terminals Lamp socket Lamp pressing into hole solder terminals no see order block Other specifications Degree of protection from front side 24 - 28 V at 20 mA forward current 2.4 V 3V max. 20 mA 100 A max. 120 mW see order block IP40 integr. LED Signal lamps with integrated LED - 7.0 mm, round protruding lens Pict.: yellow Mounting hole Operating voltage UB Forward current, IF Lamp Colour of lens Light intensity Order no. 24 - 28 V max. 20 mA LED white 400 mcd 1.69.511.101/1000 24 - 28 V max. 20 mA LED red transparent colourless transparent red 200 mcd 1.69.511.102/1300 24 - 28 V max. 20 mA LED yellow transparent yellow 200 mcd 1.69.511.103/1400 24 - 28 V max. 20 mA LED green transparent green 1000 mcd 1.69.511.104/1500 24 - 28 V max. 20 mA LED blue transparent blue 300 mcd 1.69.511.105/1600 Technical data see page 3 - 8 3-8 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with integrated LED Signal lamps with integrated LED - 9.1 mm Pict.: red transparent colourless Mounting hole Technical Data General information Form of lens Colour of lens Diameter of collar 3 Dimensions Overall height Mounting depth Mounting hole Mechanical design Mounting Terminals Lamp socket Lamp round protruding see order block 11 mm see order block 30.5 mm 9.1 mm ring nut solder terminals no see order block Electrical characteristics Operating voltage UB Forward voltage UF at 25 C Reverse voltage UR at 25 C Reverse current IR at 25 C Power dissipation Ptot at 25 C Light intensity at 20 mA Other specifications Degree of protection from front side Weight 24 - 28 V at 20 mA forward current 2.4 V 3V 100 A max. 120 mW see order block IP40 1g integr. LED Typical accessories Signal lamps with integrated LED - 9.1 mm Description Photo Fixing spanner M 9, M 10 3 - 10 Order no. Additional accessories see page 5.58.002.025/0105 5 - 21 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with integrated LED Signal lamps with integrated LED - 9.1 mm, round lens Pict.: red Mounting hole Operating voltage UB Light intensity at 20 mA Lamp Colour of lens Order no. 24 - 28 V 200 mcd LED super bright red transparent red 1.02.157.105/1300 24 - 28 V 1000 mcd LED super bright green transparent green 1.02.157.110/1500 24 - 28 V 200 mcd LED super bright yellow transparent yellow 1.02.157.115/1400 24 - 28 V 300 mcd LED super bright blue transparent blue 1.02.157.120/1600 24 - 28 V 400 mcd LED super bright white transparent colourless 1.02.157.125/1000 Technical data see page 3 - 10 3 Accessoires: Fixing spanner M 9, M 10: 5.58.002.025/0105 With integrated series resistor. Other voltages on request. integr. LED Signal lamps with integrated LED - 9.1 mm, round protruding lens Pict.: transparent colourless Mounting hole Operating voltage UB Light intensity at 20 mA Lamp Colour of lens Order no. 24 - 28 V 200 mcd LED super bright red transparent red 1.02.157.505/1300 24 - 28 V 1000 mcd LED super bright green transparent green 1.02.157.510/1500 24 - 28 V 200 mcd LED super bright yellow transparent yellow 1.02.157.515/1400 24 - 28 V 300 mcd LED super bright blue transparent blue 1.02.157.520/1600 24 - 28 V 400 mcd LED super bright white transparent colourless 1.02.157.525/1000 Technical data see page 3 - 10 Accessoires: Fixing spanner M 9, M 10: 5.58.002.025/0105 With integrated series resistor. Other voltages on request. Signal lamps Stock items are marked by bold printed order numbers. 3 - 11 Signal lamps with integrated LED Signal lamps with integrated LED - 10 mm Pict.: red green Panel cut-out Technical Data 3 integr. LED General information Form of lens Colour of lens Diameter of collar see order block see order block 12.5 mm Dimensions Overall height Mounting depth Mounting hole see order block 30.5 mm 10 mm Mechanical design Mounting Terminals Lamp socket Lamp pressing into hole quick connector 2.8 x 0.8 mm no see order block Electrical characteristics Operating voltage UB Integrated currency resistor Forward voltage UF at 25 C Reverse voltage UR at 25 C Forward current, IF Reverse current IR at 25 C Power dissipation Ptot at 25 C Light intensity Protecting diode Other specifications Degree of protection from front side Weight see order block see order block at 20 mA forward current 2.4 V 3V see order block 100 A max. 120 mW see order block see order block IP40 2.44 g Operating voltage UB DC voltage from 6 - 28 V A suitable series resistor is installed in the unit; the version without resistor must be fitted with an external one. A version with an additional protective diode is available to protect the LED against any voltage peaks. External resistor: RV= (UB - UF) : IF Recommended ratings of external resistors: - for 6 - 7 V = 330 7 0.25 W - for 12 - 16 V = 680 7 0.5 W - for 24 - 28 V = 1500 7 1 W 3 - 12 Signal lamps Signal lamps with integrated LED Signal lamps with integrated LED - 10 mm, protruding LED Pict.: red Panel cut-out Integrated currency resistor Protecting diode Operating voltage UB Forward current, IF Colour of lens Light intensity Order no. no yes max. 20 mA red 1000 mcd 1.69.525.051/0000 no yes max. 20 mA green 1000 mcd 1.69.525.056/0000 no yes max. 20 mA yellow 200 mcd 1.69.525.061/0000 no no max. 20 mA red 200 mcd 1.69.525.001/0000 no no max. 20 mA green 1000 mcd 1.69.525.006/0000 no no max. 20 mA yellow 200 mcd 1.69.525.011/0000 yes yes according to series resistor 6 - 28 V according to series resistor 6 - 28 V according to series resistor 6 - 28 V according to series resistor 6 - 28 V according to series resistor 6 - 28 V according to series resistor 6 - 28 V 24 - 28 V 15 - 20 mA red 200 mcd 1.69.525.054/0000 yes yes 24 - 28 V 13 - 18.5 mA green 1000 mcd 1.69.525.059/0000 yes yes 24 - 28 V 13 - 18.5 mA yellow 200 mcd 1.69.525.064/0000 yes no 24 - 28 V 15 - 20 mA red 200 mcd 1.69.525.004/0000 yes no 24 - 28 V 13 - 18.5 mA green 1000 mcd 1.69.525.009/0000 yes no 24 - 28 V 13 - 18.5 mA yellow 200 mcd 1.69.525.014/0000 Technical data see page 3 - 12 Signal lamps Stock items are marked by bold printed order numbers. 3 - 13 3 integr. LED Signal lamps with integrated LED Signal lamps with integrated LED - 10 mm, round lens Pict.: green 3 integr. LED Panel cut-out Integrated currency resistor Protecting diode Operating voltage UB Forward current, IF Colour of lens Light intensity Order no. yes yes 24 - 28 V 15 - 20 mA red 200 mcd 1.69.525.255/1300 yes yes 24 - 28 V 13 - 18.5 mA green 1000 mcd 1.69.525.260/1500 yes yes 24 - 28 V 13 - 18.5 mA yellow 200 mcd 1.69.525.265/1400 yes yes 24 - 28 V - blue 300 mcd 1.69.525.266/1600 yes yes 24 - 28 V - white 400 mcd 1.69.525.271/1000 yes no 24 - 28 V 15 - 20 mA red 200 mcd 1.69.525.205/1300 yes no 24 - 28 V 13 - 18.5 mA green 1000 mcd 1.69.525.210/1500 yes no 24 - 28 V 13 - 18.5 mA yellow 200 mcd 1.69.525.215/1400 yes no 24 - 28 V - blue 300 mcd 1.69.525.216/1600 yes no 24 - 28 V - white 400 mcd 1.69.525.221/1000 Technical data see page 3 - 12 Other voltages on request. 3 - 14 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with integrated LED RF 15 - Signal indicator Pict.: green Technical Data 3 integr. LED General information Colour of lens Recommended key grid see order block 19.05 mm Dimensions Length Width Overall height 15 mm 15 mm 9.7 mm Mechanical design Mounting Illumination LED colour LED type 3 - 16 Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Solderability / solder heat resistance Wave soldering Manual soldering -25 C +70 C acc. to IEC 60068-2 -14, -30, -33 and -78 according to E DIN IEC 600 28-2-20 260 C max. 350 C / 5 sec. max. THT soldering in PCB fully illuminated 1 LED see order block 2 mm Signal lamps Signal lamps with integrated LED RF 15 - Signal indicator, fully illuminated, 1 LED Pict.: green Overall height Illumination Colour of lens LED colour LED type Order no. 9.7 mm fully illuminated 1 LED fully illuminated 1 LED fully illuminated 1 LED fully illuminated 1 LED fully illuminated 1 LED red red 2 mm 3.14.200.051/0000 green green 2 mm 3.14.200.052/0000 yellow yellow 2 mm 3.14.200.053/0000 orange yellow 2 mm 3.14.200.054/0000 blue blue 2 mm 3.14.200.055/0000 9.7 mm 9.7 mm 9.7 mm 9.7 mm 3 Technical data see page 3 - 16 Technical data of LED see separate page at the beginning of chapter 4 PCB Keyswitches. integr. LED Signal lamps Stock items are marked by bold printed order numbers. 3 - 17 Signal lamps with integrated LED RF 19 - Signal indicator Pict.: 0.5 x 1-module 0,5 x 2-module 1 x 1-module 1 x 2-module Technical Data 3 integr. LED General information Colour of lens Recommended key grid see order block 23/x mm Dimensions Length Width Overall height see order block see order block 9.15 mm Mechanical design Mounting Illumination LED colour LED type THT soldering in PCB see order block see order block see order block 3 - 18 Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Solderability / solder heat resistance Wave soldering Manual soldering -25 C +70 C acc. to IEC 60068-2 -14, -30, -33 and -78 according to E DIN IEC 600 28-2-20 260 C max. 350 C / 5 sec. max. Signal lamps Signal lamps with integrated LED RF 19 - Signal indicator, 1/2 x 1-module Housing Lens Illuminated area 16.4 x 7.8 mm Pict.: 0.5 x 1-module Illumination Colour of lens LED colour LED type Order no. fully illuminated 1 LED fully illuminated 1 LED fully illuminated 1 LED fully illuminated 1 LED red red 2 mm 3.14.002.061/0000 green green 2 mm 3.14.002.062/0000 yellow yellow 2 mm 3.14.002.063/0000 orange yellow 2 mm 3.14.002.064/0000 Technical data see page 3 - 18 3 Technical data of LED see separate page at the beginning of chapter 4 PCB Keyswitches. RF 19 - Signal indicator, 1/2 x 2-module integr. LED Pict.: 0,5 x 2-module Illumination Colour of lens LED colour LED type Order no. fully illuminated 3 LED fully illuminated 3 LED fully illuminated 3 LED fully illuminated 3 LED red red 2 mm 3.14.002.908/0000 green green 2 mm 3.14.002.909/0000 yellow yellow 2 mm 3.14.002.910/0000 orange yellow 2 mm 3.14.002.911/0000 Technical data see page 3 - 18 Technical data of LED see separate page at the beginning of chapter 4 PCB Keyswitches. Signal lamps Stock items are marked by bold printed order numbers. 3 - 19 Signal lamps with integrated LED RF 19 - Signal indicator, 1 x 1-module Pict.: 1 x 1-module 3 Illumination Colour of lens LED colour LED type Order no. fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED red red 2 mm 3.14.002.051/0000 green green 2 mm 3.14.002.052/0000 yellow yellow 2 mm 3.14.002.053/0000 orange yellow 2 mm 3.14.002.054/0000 blue blue 2 mm 3.14.001.659/0000 Technical data see page 3 - 18 For technical data of the LED see separate page at the beginning of chapter RF short-travel keyswitches" Suitable for RK 90 system design, illuminated for 2-module keycap. integr. LED RF 19 - Signal indicator, 1 x 2-module Pict.: 1 x 2-module Illumination Colour of lens LED colour LED type Order no. fully illuminated 5 LED fully illuminated 5 LED fully illuminated 5 LED fully illuminated 5 LED red red 2 mm 3.14.002.071/0000 green green 2 mm 3.14.002.072/0000 yellow yellow 2 mm 3.14.002.073/0000 orange yellow 2 mm 3.14.002.074/0000 Technical data see page 3 - 18 For technical data of the LED see separate page at the beginning of chapter RF short-travel keyswitches" 3 - 20 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with integrated LED RG 85 III - Signal indicator, without lens Technical Data Dimensions Mounting grid min. Length Width 3 Mechanical design Version Mounting Terminals Illumination integr. LED Electrical characteristics Operating voltage for LED Input current LED 55 x 35 mm 64 mm 34 mm according to lens on U-rails or single mounting 8-pin Micro-Match(R) female connector see order block Other specifications Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Degree of protection rail mounting Degree of protection single mounting Flammability of materials -25 C +70 C -40 C +80 C acc. to IEC 60068-2 -14, -30, -33 and -78 IP40 IP65 according to UL 94 HB 2420% V depending on LED colour 20 - 30 mA Typical accessories RG 85 III - Signal indicator, without lens Description Photo Order no. Additional accessories see page Cable, 8 wires, with socket connectors on both ends, length 2 m 5.03.772.262/0000 4 - 122 RG 85 III - Lens, square, for signal indicators 5.04.903.009/0000 4 - 122 RG 85 III - Lens, round, for signal indicators 5.04.903.010/0000 4 - 121 RG 85 III - Lens, triangular, for signal indicators 5.04.903.011/0000 4 - 122 3 - 22 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with integrated LED RG 85 III - Signal indicator, without lens Illumination Order no. 5 LED white 3.99.400.100/2000 5 LED red 3.99.400.100/3000 5 LED yellow 3.99.400.100/4000 5 LED green 3.99.400.100/5000 5 LED blue 3.99.400.100/6000 5 LED white, 5 LED blue 3.99.400.100/7000 5 LED green, 5 LED red 3.99.400.100/8000 3 Technical data see page 3 - 22 Please order round, square or triangular lenses separately. integr. LED Signal lamps Stock items are marked by bold printed order numbers. 3 - 23 Signal lamps with integrated lamp General Data Signal lamps with integral filament lamp, neon lamp or neon glow lamp. For mounting hole diameters from 5 to 14 mm. The mm specification in the product name indicates the appropriate mounting hole diameter of the signal lamps. 3 Content Signal lamps with integrated filament lamp - 5 mm Signal lamps with integrated filament lamp - 5 mm, round lens 3 - 26 3 - 27 Signal lamps with integrated filament/neon lamp - 7 mm Signal lamps with integrated filament/neon lamp - 7 mm, solder terminals 3 - 28 3 - 29 Signal lamps with integrated filament/neon lamp - 10 mm Signal lamps with integrated filament/neon lamp - 10 mm, round lens 3 - 30 3 - 31 Signal lamps with integrated filament/neon lamp - 10 mm Signal lamps with integrated filament/neon lamp - 10 mm, round lens Signal lamps with integrated filament/neon lamp - 10 mm, square lens Signal lamps with integrated filament/neon lamp - 10 mm, lens in arrow shape 3 - 32 3 - 33 3 - 34 3 - 35 Signal lamps with integrated filament/neon lamp - 14 mm Signal lamps with integrated neon lamp - 14 mm, round lens, 230 V Signal lamps with integrated filament lamp - 14 mm, round lens, 28 V 3 - 36 3 - 37 3 - 37 Signal lamps 3 - 25 integr. Lamp Signal lamps with integrated lamp Signal lamps with integrated filament lamp - 5 mm Pict.: green Mounting hole Technical Data General information Form of lens Colour of lens Diameter of collar 3 see order block see order block see order block Dimensions Length of collar Width of collar Overall height Mounting depth Mounting hole see order block see order block 1 mm 18 mm 5 mm Mechanical design Mounting Terminals Lamp socket Lamp pressing into hole solder terminals no filament lamp Electrical characteristics Voltage limit max. Power limit max. Other specifications Operating life Degree of protection from front side Weight 24 V 0.45 W 10,000 h IP40 0.3 g integr. Lamp 3 - 26 Signal lamps Signal lamps with integrated lamp Signal lamps with integrated filament lamp - 5 mm, round lens Pict.: green Mounting hole Voltage limit max. Power limit max. Lamp Operating life Colour of lens Order no. 24 V 0.45 W filament lamp 10000 h 1.69.508.113/1002 24 V 0.45 W filament lamp 10000 h transparent colourless transparent red 24 V 0.45 W filament lamp 10000 h transparent yellow 1.69.508.113/1402 24 V 0.45 W filament lamp 10000 h transparent green 1.69.508.113/1502 24 V 0.45 W filament lamp 10000 h transparent blue 1.69.508.113/1601 1.69.508.113/1301 Technical data see page 3 - 26 3 integr. Lamp Signal lamps Stock items are marked by bold printed order numbers. 3 - 27 Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp - 7 mm Pict.: yellow Mounting hole Technical Data General information Form of lens Colour of lens Diameter of collar 3 integr. Lamp round see order block 8.5 Dimensions Overall height Mounting depth Mounting hole 5 mm see order block 7 mm Mechanical design Mounting Terminals Lamp socket Lamp pressing into hole see order block no see order block Electrical characteristics Voltage limit max. Power limit max. Other specifications Operating life Degree of protection from front side Weight see order block see order block see order block IP40 0.87 g Approvals VDE T85 (only version with neon lamp) 3 - 28 Signal lamps Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp - 7 mm, solder terminals Pict.: yellow Mounting hole Voltage limit max. Power limit max. Terminals Lamp Operating life Colour of lens Order no. 24 V 0.84 W filament lamp 25,000 h 0.84 W filament lamp 25,000 h 24 V 0.84 W filament lamp 25,000 h 24 V 0.84 W filament lamp 25,000 h 230 V - neon lamp - 230 V - neon lamp - 230 V - neon lamp - transparent colourless transparent red transparent yellow transparent green transparent colourless transparent red transparent yellow 1.69.511.054/1002 24 V solder terminals solder terminals solder terminals solder terminals solder terminals solder terminals solder terminals 1.69.511.054/1301 1.69.511.054/1402 1.69.511.054/1502 1.69.511.059/1002 1.69.511.059/1301 1.69.511.059/1402 3 Technical data see page 3 - 28 Other voltages on request. integr. Lamp Signal lamps Stock items are marked by bold printed order numbers. 3 - 29 Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp - 10 mm Panel cut-out Technical Data General information Form of lens Colour of lens Diameter of collar 3 Dimensions Length of collar Width of collar Overall height Mounting depth Mounting hole Mechanical design Mounting Terminals Lamp socket Lamp see order block see order block see order block see order block see order block 1.2 mm 32 mm 10 mm Electrical characteristics Voltage limit max. Power limit max. Other specifications Operating life Degree of protection from front side Weight see order block see order block see order block IP40 2.5 g pressing into hole quick connector 2.8 x 0.8 mm no see order block integr. Lamp Approvals VDE T85 (only version with neon lamp) 3 - 30 Signal lamps Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp - 10 mm, round lens Panel cut-out Voltage limit max. Power limit max. Lamp Operating life Colour of lens Order no. 28 V 1.2 W filament lamp 10,000 h 1.69.527.003/1002 28 V 1.2 W filament lamp 10,000 h transparent colourless transparent red 28 V 1.2 W filament lamp 10,000 h transparent yellow 1.69.527.003/1402 28 V 1.2 W filament lamp 10,000 h transparent green 1.69.527.003/1502 230 V - neon lamp - 1.69.527.104/1002 230 V - neon lamp - transparent colourless transparent red 230 V -W neon lamp - transparent yellow 1.69.527.104/1402 1.69.527.003/1301 1.69.527.104/1301 3 Technical data see page 3 - 30 integr. Lamp Signal lamps Stock items are marked by bold printed order numbers. 3 - 31 Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp - 10 mm Pict.: transparent colourless Panel cut-out Technical Data General information Form of lens Colour of lens Diameter of collar 3 see order block see order block see order block Dimensions Length of collar Width of collar Overall height Mounting depth Mounting hole see order block see order block 3 mm 30 mm 10 mm Mechanical design Mounting Terminals Lamp socket Lamp pressing into hole see order block no see order block Electrical characteristics Voltage limit max. Power limit max. Other specifications Operating life Degree of protection from front side Weight see order block see order block see order block IP40 2.5 g integr. Lamp Approvals VDE 0710 (T85 for filament and T120 for neon lamp versions) 3 - 32 Signal lamps Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp - 10 mm, round lens Pict.: transparent colourless Panel cut-out Voltage limit max. Power limit max. Lamp Terminals Operating life Colour of lens Order no. 28 V 1.2 W 28 V 1.2 W 28 V 1.2 W 28 V 1.2 W 28 V 1.2 W 230 V - 230 V - neon lamp 230 V - neon lamp 230 V - neon glow lamp opaque white transparent colourless transparent red transparent yellow transparent green transparent blue transparent colourless transparent red transparent yellow transparent green 1.69.507.105/0214 1.2 W quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 10,000 h 28 V filament lamp filament lamp filament lamp filament lamp filament lamp filament lamp neon lamp 10,000 h 10,000 h 10,000 h 10,000 h 10,000 h - 1.69.507.105/1002 1.69.507.105/1301 1.69.507.105/1402 1.69.507.105/1502 1.69.507.105/1601 1.69.507.117/1002 1.69.507.117/1301 1.69.507.117/1402 1.69.507.118/1502 integr. Lamp Technical data see page 3 - 32 Other voltages and versions with connection cable on request. Signal lamps 3 Stock items are marked by bold printed order numbers. 3 - 33 Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp - 10 mm, square lens Pict.: red 3 integr. Lamp Panel cut-out Voltage limit max. Power limit max. Lamp Terminals Operating life Colour of lens Order no. 28 V 1.2 W 28 V 1.2 W 28 V 1.2 W 28 V 1.2 W 28 V 1.2 W 230 V - 230 V - neon lamp 230 V - neon lamp 230 V - neon glow lamp opaque white transparent colourless transparent red transparent yellow transparent green transparent blue transparent colourless transparent red transparent yellow transparent green 1.69.507.125/0214 1.2 W quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 10,000 h 28 V filament lamp filament lamp filament lamp filament lamp filament lamp filament lamp neon lamp 10,000 h 10,000 h 10,000 h 10,000 h 10,000 h - 1.69.507.125/1002 1.69.507.125/1301 1.69.507.125/1402 1.69.507.125/1502 1.69.507.125/1601 1.69.507.137/1002 1.69.507.137/1301 1.69.507.137/1402 1.69.507.138/1502 Technical data see page 3 - 32 Other voltages and versions with connection cable on request. 3 - 34 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp - 10 mm, lens in arrow shape Pict.: green Panel cut-out Voltage limit max. Power limit max. Lamp Terminals Operating life Colour of lens Order no. 28 V 1.2 W 28 V 1.2 W 28 V 1.2 W 28 V 1.2 W 28 V 1.2 W 230 V - 230 V - neon lamp 230 V - neon lamp 230 V - neon glow lamp opaque white transparent colourless transparent red transparent yellow transparent green transparent blue transparent colourless transparent red transparent yellow transparent green 1.69.507.145/0214 1.2 W quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 10,000 h 28 V filament lamp filament lamp filament lamp filament lamp filament lamp filament lamp neon lamp 10,000 h 10,000 h 10,000 h 10,000 h 10,000 h - 1.69.507.145/1002 1.69.507.145/1301 1.69.507.145/1402 1.69.507.145/1502 1.69.507.145/1601 1.69.507.157/1002 1.69.507.157/1301 1.69.507.157/1402 1.69.507.158/1502 integr. Lamp Technical data see page 3 - 32 Other voltages and versions with connection cable on request. Signal lamps 3 Stock items are marked by bold printed order numbers. 3 - 35 Signal lamps with integrated lamp Signal lamps with integrated filament/neon lamp - 14 mm Pict.: transparent red transparent colourless Panel cut-out Technical Data 3 integr. Lamp General information Form of lens Colour of lens see order block see order block Electrical characteristics Voltage limit max. Power limit max. Dimensions Dimensions of collar Overall height Mounting depth Mounting hole see order block 4 mm see order block 14 mm Other specifications Operating life Degree of protection from front side Weight Mechanical design Mounting Terminals Lamp socket Lamp pressing into hole see order block no see order block see order block 1.2 W see order block IP40 5g Approvals VDE T85 (only version with neon lamp) 3 - 36 Signal lamps Signal lamps with integrated lamp Signal lamps with integrated neon lamp - 14 mm, round lens, 230 V Pict.: transparent colourless Panel cut-out Voltage limit max. Power limit max. Lamp Terminals Operating life Colour of lens Order no. 230 V - neon lamp - - neon lamp 230 V - neon lamp 230 V - neon glow lamp transparent colourless transparent red transparent yellow transparent green 1.02.614.502/1002 230 V quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 - 1.02.614.502/1301 1.02.614.502/1402 1.02.614.503/1502 Technical data see page 3 - 36 3 Signal lamps with integrated filament lamp - 14 mm, round lens, 28 V Pict.: transparent red integr. Lamp Panel cut-out Voltage limit max. Power limit max. Lamp Terminals Operating life Colour of lens Order no. 28 V 1.2 W 28 V 1.2 W 28 V 1.2 W transparent colourless transparent red transparent yellow transparent green 1.69.523.003/1002 1.2 W quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 quick connector 2.8 x 0.8 10,000 h 28 V filament lamp filament lamp filament lamp filament lamp 10,000 h 10,000 h 10,000 h 1.69.523.003/1301 1.69.523.003/1402 1.69.523.003/1502 Technical data see page 3 - 36 Signal lamps Stock items are marked by bold printed order numbers. 3 - 37 Signal lamps with lamp socket General Data Signal lamps with lamp socket. The standard illumination is by a filament lamp; illumination with LED is available on request. The mm specification in the product name indicates the appropriate mounting hole diameter of the signal lamps. 3 Content 8 mm Series - Signal lamp 8 mm Series - Signal lamp, round collar 8 mm Series - Signal lamp, square collar 3 - 42 3 - 43 3 - 43 Signal lamps with lamp socket - W 2 x 4.6d, 9.1 mm Signal lamps with lamp socket - W 2 x 4.6d, 9.1 mm, round lens 3 - 44 3 - 45 Signal lamps with lamp socket - T 4.6, 9.1 mm Signal lamps with lamp socket - T 4.6, 9.1 mm, round lens 3 - 46 3 - 47 Signal lamps with lamp socket - W 2x4.6d, 11.1 mm Signal lamps with lamp socket - W 2x4.6d, 11 mm, round lens 3 - 48 3 - 49 Signal lamps with lamp socket - BA 9s (MBC/MCC), 16.2 mm Signal lamps with lamp socket - BA 9s (MBC/MCC), 16.2 mm, round lens 3 - 50 3 - 51 Signal lamps with lamp socket - E 10 (MES), 16.2 mm Signal lamps with lamp socket - E 10 (MES), 16.2 mm, round lens Signal lamps with lamp socket - E 10 (MES), 16.2 mm, round lens 3 - 52 3 - 53 3 - 54 LUMOTAST FK - Signal lamp LUMOTAST FK - Signal lamp, square collar LUMOTAST FK - Signal lamp, round collar LUMOTAST FK - Signal lamp, rectangular collar 3 - 56 3 - 57 3 - 58 3 - 58 LUMOTAST 25 - Signal lamp LUMOTAST 25 - Signal lamp, 24 V, Click" quick-assembly feature LUMOTAST 25 - Signal lamp, 24 V, ring nut fixing 3 - 60 3 - 61 3 - 62 LUMOTAST 75 IP40 - Signal lamp with lamp socket T 4.5 LUMOTAST 75 IP40 - Signal lamp with lamp socket T 4.5, round collar, protruding lens LUMOTAST 75 IP40 - Signal lamp, square collar, flush lens LUMOTAST 75 IP40 - Signal lamp, rectangular collar, flush lens LUMOTAST 75 IP40 - Signal lamp, square collar, protruding lens 3 - 64 3 - 66 3 - 66 3 - 67 3 - 67 Signal lamps 3 - 39 With Socket Signal lamps with lamp socket 3 With Socket LUMOTAST 75 IP65 - Signal lamp LUMOTAST 75 IP65 - Signal lamp, flush lens, square collar LUMOTAST 75 IP65 - Signal lamp, protruding lens, square collar LUMOTAST 75 IP65 - Signal lamp, flush lens, round collar LUMOTAST 75 IP65 - Signal lamp, protruding lens, round collar LUMOTAST 75 IP65 - Signal lamp, flush lens, rectangular collar 3 - 68 3 - 70 3 - 70 3 - 71 3 - 71 3 - 72 RAFIX 16 - Signal indicator RAFIX 16 - Signal indicator, square lens RAFIX 16 - Signal indicator, square collar, flush lens RAFIX 16 - Signal indicator, square collar, protruding lens RAFIX 16 - Signal indicator, round lens RAFIX 16 - Signal indicator, round collar, flush lens RAFIX 16 - Signal indicator, round collar, protruding lens RAFIX 16 - Signal indicator, square collar, alignable without gaps, flush lens RAFIX 16 - Signal indicator, square collar, alignable without gaps, protruding lens 3 - 74 3 - 75 3 - 76 3 - 76 3 - 77 3 - 77 3 - 78 3 - 78 3 - 79 RAFIX 16 F - Signal indicator RAFIX 16 F - Signal indicator, flush lens, square black collar RAFIX 16 F - Signal indicator, flush lens, round black collar RAFIX 16 F - Signal indicator, flush lens, round metallized collar 3 - 80 3 - 81 3 - 82 3 - 82 NEW Signal lamps with lamp socket - BA 9s (MBC/MCC), 18.2 mm Signal lamps with lamp socket - BA 9s (MBC/MCC), 18.2 mm, round lens 3 - 84 3 - 85 Signal lamps with lamp socket - E 14, 22.3 mm Signal lamps with lamp socket - E 14, IP40, 22.3 mm Signal lamps with lamp socket - E 14, 22.3 mm, screw-on lens, IP40 3 - 86 3 - 87 3 - 87 RAFIX 22 QR - Signal indicator RAFIX 22 QR - Signal indicator, flat, round collar, for legend inserts RAFIX 22 QR - Signal indicator, high, round collar NEW RAFIX 22 QR - Signal indicator, flat, square collar, for legend inserts RAFIX 22 QR - Signal indicator, high, square collar NEW 3 - 88 3 - 89 3 - 90 3 - 90 3 - 91 RAFIX 22 FS - Signal indicator RAFIX 22 FS - Signal indicator, round collar, flat RAFIX 22 FS - Signal indicator, round collar, high RAFIX 22 FS - Signal indicator, square collar, flat RAFIX 22 FS - Signal indicator, round collar, high 3 - 92 3 - 93 3 - 93 3 - 94 3 - 94 NEW NEW Signal lamps with lamp socket - E 14, 30.5 mm Signal lamps with lamp socket - E 14, IP40, 30.5 mm 3 - 96 3 - 97 Signal lamps with lamp socket - BA 15d, 30.5 mm Signal lamps with lamp socket - BA 15d, IP40, 30.5 mm 3 - 98 3 - 99 3 - 40 Signal lamps Signal lamps with lamp socket 8 mm Series - Signal lamp Mounting hole Technical Data General information Form of lens Colour of lens Form of collar 3 With Socket Electrical characteristics Voltage limit max. Power limit max. protruding lens see order block see order block Dimensions Length of collar Width of collar Diameter of collar Overall height Mounting depth Mounting hole 8.9 mm 8.9 mm see order block 9 mm 31 mm 8.1 mm Mechanical design Mounting Terminals Lamp socket Lamp ring nut solder terminals Bi-Pin T 1 filament lamp / LED Other specifications Degree of protection from front side Weight Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Soldering time max. Soldering temperature max. 24 V 0.4 W IP40 2g -25 C +55 C -40 C +80 C acc. to IEC 60068-2 -14, -30, -33 and -78 3s 350 C Typical accessories 8 mm Series - Signal lamp Description Photo Order no. Additional accessories see page Filament lamp, Bi-Pin T 1 base, 24 - 28 V 1.90.180.473/0000 5 - 5 LED Bi-Pin T 1, red, 3 V 1.90.691.026/0000 5 - 15 LED Bi-Pin T 1, green, 3 V 1.90.691.027/0000 5 - 15 LED Bi-Pin T 1, yellow, 3 V 1.90.691.028/0000 5 - 15 Fixing spanner M 8 5.58.002.027/7705 5 - 21 3 - 42 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket 8 mm Series - Signal lamp, round collar Pict.: with colourless lens Mounting hole Voltage limit max. Power limit max. Lamp socket Order no. without lens Note 24 V 0.4 W Bi-Pin T 1 1.65.120.001/0000 Please include the desired lens in your order. Technical data see page 3 - 42 Lenses: Lens, transparent colourless: 5.05.510.359/1002 Lens, transparent red: 5.05.510.359/1303 Lens, transparent yellow: 5.05.510.359/1402 Lens, transparent green: 5.05.510.359/1502 8 mm Series - Signal lamp, square collar 3 Pict.: with green lens Mounting hole Voltage limit max. Power limit max. Lamp socket Order no. without lens Note 24 V 0.4 W Bi-Pin T 1 1.65.120.011/0000 Please include the desired lens in your order. Technical data see page 3 - 42 Lenses: Lens, transparent colourless: 5.05.510.360/1002 Lens, transparent red: 5.05.510.360/1303 Lens, transparent yellow: 5.05.510.360/1402 Lens, transparent green: 5.05.510.360/1502 Signal lamps Stock items are marked by bold printed order numbers. 3 - 43 With Socket Signal lamps with lamp socket Signal lamps with lamp socket - W 2 x 4.6d, 9.1 mm Pict.: red Mounting hole Technical Data General information Form of lens Colour of lens Diameter of collar 3 Dimensions Overall height Mounting depth Mounting hole Mechanical design Mounting Terminals Lamp socket Lamp round see order block 11 mm Electrical characteristics Voltage limit max. Power limit max. Other specifications Degree of protection from front side Weight 7 mm 25.5 mm 9.10 mm 35 V 1.2 W IP40 1g ring nut solder/quick connect terminals 2.8 x 0.8 mm W 2 x 4.6d filament lamp Typical accessories Signal lamps with lamp socket - W 2 x 4.6d, 9.1 mm With Socket Description Photo Order no. Additional accessories see page Filament lamp, W 2 x 4.6d base, 24 - 30 V 1.90.120.005/0000 5 - 4 Filament lamp, W 2 x 4.6d base, 60 V 1.90.120.009/0000 5 - 4 Filament lamp, W 2 x 4.6d base, 48 V 1.90.120.010/0000 5 - 4 Filament lamp, W 2 x 4.6d base, 24 V 1.90.120.011/0000 5 - 4 Filament lamp, W 2 x 4.6d base, 12 V 1.90.120.012/0000 5 - 4 Fixing spanner M 9, M 10 5.58.002.025/0105 5 - 21 3 - 44 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Signal lamps with lamp socket - W 2 x 4.6d, 9.1 mm, round lens Pict.: red Mounting hole Voltage Power Lamp limit max. limit max. Colour of lens 35 V 1.2 W filament lamp 35 V 1.2 W filament lamp 35 V 1.2 W filament lamp 35 V 1.2 W filament lamp 35 V 1.2 W filament lamp transparent colourless transparent red transparent yellow transparent green transparent blue Order no. complete Order no. single parts Housing Lens 1.66.001.011/1002 1.66.001.026/0000 5.49.255.002/1002 1.66.001.011/1301 1.66.001.026/0000 5.49.255.002/1301 1.66.001.011/1402 1.66.001.026/0000 5.49.255.002/1402 1.66.001.011/1502 1.66.001.026/0000 5.49.255.002/1502 1.66.001.011/1601 1.66.001.026/0000 5.49.255.002/1601 Technical data see page 3 - 44 3 Please order luminous elements separately. With Socket Signal lamps Stock items are marked by bold printed order numbers. 3 - 45 Signal lamps with lamp socket Signal lamps with lamp socket - T 4.6, 9.1 mm Pict.: red transparent colourless Mounting hole Technical Data General information Form of lens Colour of lens Diameter of collar 3 see order block see order block 11 mm Dimensions Overall height Mounting depth Mounting hole see order block 30.5 mm 9.1 mm Mechanical design Mounting Terminals Lamp socket Lamp ring nut solder terminals T 4.6 filament lamp Electrical characteristics Voltage limit max. Power limit max. Other specifications Degree of protection from front side Weight 35 V 1W IP40 1g Typical accessories Signal lamps with lamp socket - T 4.6, 9.1 mm Description With Socket Photo Order no. Additional accessories see page Filament lamp, T 4.6 base, 12 V 1.90.100.012/0000 5 - 6 Filament lamp, T 4.6 base, 24 V 1.90.100.013/0000 5 - 6 Fixing spanner M 9, M 10 5.58.002.025/0105 5 - 21 3 - 46 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Signal lamps with lamp socket - T 4.6, 9.1 mm, round lens Pict.: red Mounting hole Lamp Voltage limit max. socket Lamp 35 V T 4.6 filament lamp 35 V T 4.6 filament lamp 35 V T 4.6 filament lamp 35 V T 4.6 filament lamp Colour of lens Order no. complete Order no. single parts Housing transparent colourless transparent red transparent yellow transparent green Lens 1.02.157.001/1002 1.02.157.021/0000 5.49.255.001/1002 1.02.157.001/1307 1.02.157.021/0000 5.49.255.001/1307 1.02.157.001/1403 1.02.157.021/0000 5.49.255.001/1403 1.02.157.001/1510 1.02.157.021/0000 5.49.255.001/1510 Technical data see page 3 - 46 Please order luminous elements separately. 3 Signal lamps with lamp socket - T 4.6, 9.1 mm, round lens Pict.: transparent colourless Lamp Voltage limit max. socket Lamp 35 V T 4.6 filament lamp 35 V T 4.6 filament lamp 35 V T 4.6 filament lamp 35 V T 4.6 filament lamp Mounting hole Colour of lens Order no. complete Housing transparent colourless transparent red transparent yellow transparent green With Socket Order no. single parts Lens 1.02.157.011/1002 1.02.157.021/0000 5.49.255.002/1002 1.02.157.011/1301 1.02.157.021/0000 5.49.255.002/1301 1.02.157.011/1402 1.02.157.021/0000 5.49.255.002/1402 1.02.157.011/1502 1.02.157.021/0000 5.49.255.002/1502 Technical data see page 3 - 46 Please order luminous elements separately. Signal lamps Stock items are marked by bold printed order numbers. 3 - 47 Signal lamps with lamp socket Signal lamps with lamp socket - W 2x4.6d, 11.1 mm Pict.: with red lens Mounting hole Technical Data General information Form of lens Colour of lens Diameter of collar 3 Dimensions Overall height Mounting depth Mounting hole Mechanical design Mounting Terminals Lamp socket Lamp round see order block 11 Electrical characteristics Voltage limit max. Power limit max. Other specifications Degree of protection from front side Weight 8.5 mm 28.5 mm 11.10 mm 35 V 1.2 W IP40 1.4 g ring nut quick connector A 2.8 x 0.5 W 2 x 4.6 d filament lamp Typical accessories Signal lamps with lamp socket - W 2x4.6d, 11.1 mm With Socket Description Photo Order no. Additional accessories see page Filament lamp, W 2 x 4.6d base, 24 - 30 V 1.90.120.005/0000 5 - 4 Filament lamp, W 2 x 4.6d base, 60 V 1.90.120.009/0000 5 - 4 Filament lamp, W 2 x 4.6d base, 48 V 1.90.120.010/0000 5 - 4 Filament lamp, W 2 x 4.6d base, 24 V 1.90.120.011/0000 5 - 4 Filament lamp, W 2 x 4.6d base, 12 V 1.90.120.012/0000 5 - 4 Protective sleeve made of Buna N (NBR), 8 x 30 5.52.011.023/0100 Fixing spanner M 11, M 13 5.58.002.026/0105 5 - 21 Please include the desired lens in your order. 3 - 48 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Signal lamps with lamp socket - W 2x4.6d, 11 mm, round lens Pict.: with red lens Mounting hole Voltage limit max. Power limit max. Lamp socket Colour of lens Order no. without lens Note 35 V 1.2 W W 2 x 4.6 d - 1.66.003.091/0000 Please include the desired lens in your order. Technical data see page 3 - 48 Lenses: Lens transparent colourless: 5.49.255.003/1002 Lens transparent red: 5.49.255.003/1301 Lens transparent yellow: 5.49.255.003/1402 Lens transparent green: 5.49.255.003/1502 Please order luminous elements separately. 3 With Socket Signal lamps Stock items are marked by bold printed order numbers. 3 - 49 Signal lamps with lamp socket Signal lamps with lamp socket - BA 9s (MBC/MCC), 16.2 mm Pict.: transparent colourless yellow Panel cut-out Technical Data General information Form of lens Colour of lens Diameter of collar 3 Dimensions Overall height Mounting depth Mounting hole Mechanical design Mounting Terminals Lamp socket Lamp see order block see order block see order block see order block 45.8 mm 16.2 mm Electrical characteristics Voltage limit max. Power limit max. Other specifications Degree of protection from front side Weight 250 V 2W see order block 10 g ring nut solder/quick connector 6.3x0.8 / 2x2.8x0.8mm BA 9 s filament lamp Approvals With Socket VDE 0710 Typical accessories Signal lamps with lamp socket - BA 9s (MBC/MCC), 16.2 mm Description Photo Order no. Additional accessories see page Protective sleeve for terminals made of Buna N (NBR) 5.52.011.027/0100 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 21 3 - 50 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Signal lamps with lamp socket - BA 9s (MBC/MCC), 16.2 mm, round lens Pict.: transparent colourless Panel cut-out Power Degree of protection Voltage limit max. limit max. from front side Colour of lens 250 V 2W IP40 250 V 2W IP40 250 V 2W IP40 250 V 2W IP40 transparent colourless transparent red transparent yellow transparent green Order no. complete Order no. single parts Housing Lens 1.63.004.001/1002 1.63.004.091/0000 5.49.205.013/1002 1.63.004.001/1301 1.63.004.091/0000 5.49.205.013/1301 1.63.004.001/1402 1.63.004.091/0000 5.49.205.013/1402 1.63.004.001/1502 1.63.004.091/0000 5.49.205.013/1502 Technical data see page 3 - 50 Accessoires: Filament lamp, BA 9s base (MBC/MCC), 12 - 15 V: 1.90.060.132/0000 Filament lamp, BA 9s base (MBC/MCC), 24 - 30 V: 1.90.060.133/0000 Filament lamp, BA 9s base (MBC/MCC), 110 - 130 V: 1.90.060.137/0000 Neon lamp BA 9s (MBC/MCC), 220 V AC: 1.90.560.102/0000 3 Technical data lamps see chapter 5 Signal lamps with lamp socket - BA 9s (MBC/MCC), 16.2 mm, round lens With Socket Pict.: yellow Panel cut-out Voltage Power Degree of protection limit max. limit max. from front side Colour of lens 250 V 2W IP65 250 V 2W IP65 250 V 2W IP65 250 V 2W IP65 transparent colourless transparent red transparent yellow transparent green Order no. complete Order no. single parts Housing Lens 1.63.004.010/1002 1.63.004.100/0000 5.49.227.007/1002 1.63.004.010/1301 1.63.004.100/0000 5.49.227.007/1301 1.63.004.010/1402 1.63.004.100/0000 5.49.227.007/1402 1.63.004.010/1502 1.63.004.100/0000 5.49.227.007/1502 Technical data see page 3 - 50 Accessoires: Filament lamp, BA 9s base (MBC/MCC), 12 - 15 V: 1.90.060.003/0000 Filament lamp, BA 9s base (MBC/MCC), 24 - 30 V: 1.90.060.014/0000 Neon lamp BA 9s (MBC/MCC), 220 V AC: 1.90.560.002/0000 Technical data lamps see chapter 5 Signal lamps Stock items are marked by bold printed order numbers. 3 - 51 Signal lamps with lamp socket Signal lamps with lamp socket - E 10 (MES), 16.2 mm Pict.: red Screw terminals, yellow Panel cut-out Technical Data General information Form of lens Colour of lens Diameter of collar 3 round see order block 20 mm Dimensions Overall height Mounting depth Mounting hole see order block see order block 16.2 mm Mechanical design Mounting Terminals Lamp socket Lamp ring nut see order block E 10 filament lamp Electrical characteristics Voltage limit max. Power limit max. Other specifications Degree of protection from front side Weight 250 V 2W IP40 11 g Approvals With Socket VDE 0710 Typical accessories Signal lamps with lamp socket - E 10 (MES), 16.2 mm Description Photo Order no. Additional accessories see page Filament lamp, E 10 (MES) base, 24 - 30 V 1.90.010.033/0000 5 - 10 Filament lamp, E 10 (MES) base, 110 - 130 V 1.90.010.037/0000 5 - 10 Protective sleeve for terminals 5.52.011.026/0100 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 21 3 - 52 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Signal lamps with lamp socket - E 10 (MES), 16.2 mm, round lens Pict.: Screw terminals, yellow screw terminals Power Terminals Voltage limit max. limit max. Colour of lens 250 V 2W 250 V 2W 250 V 2W 250 V 2W 250 V 2W transparent colourless transparent red transparent yellow transparent green transparent blue screw terminals nickel-plated screw terminals nickel-plated screw terminals nickel-plated screw terminals nickel-plated screw terminals nickel-plated Panel cut-out Order no. complete Order no. single parts Housing Lens 1.60.502.001/1002 1.60.502.099/0000 5.49.227.004/1002 1.60.502.001/1301 1.60.502.099/0000 5.49.227.004/1301 1.60.502.001/1402 1.60.502.099/0000 5.49.227.004/1402 1.60.502.001/1502 1.60.502.099/0000 5.49.227.004/1502 1.60.502.001/1601 1.60.502.099/0000 5.49.227.004/1601 Technical data see page 3 - 52 3 Signal lamps with lamp socket - E 10 (MES), 16.2 mm, round lens Pict.: red screw terminals Voltage Power Terminals limit max. limit max. Colour of lens 250 V 2W 250 V 2W 250 V 2W 250 V 2W 250 V 2W transparent colourless transparent red transparent yellow transparent green transparent blue screw terminals nickel-plated screw terminals nickel-plated screw terminals nickel-plated screw terminals nickel-plated screw terminals nickel-plated Panel cut-out Order no. complete With Socket Order no. single parts Housing Lens 1.60.502.102/1002 1.60.502.091/0000 5.49.205.013/1002 1.60.502.102/1301 1.60.502.091/0000 5.49.205.013/1301 1.60.502.102/1402 1.60.502.091/0000 5.49.205.013/1402 1.60.502.102/1502 1.60.502.091/0000 5.49.205.013/1502 1.60.502.102/1601 1.60.502.091/0000 5.49.205.013/1601 Technical data see page 3 - 52 Versions with 2.8 x 0.8 quick-connect terminals available on request. Signal lamps Stock items are marked by bold printed order numbers. 3 - 53 Signal lamps with lamp socket Signal lamps with lamp socket - E 10 (MES), 16.2 mm, round lens Pict.: Screw terminals, yellow screw terminals Voltage Power Terminals limit max. limit max. Colour of lens 250 V 2W 250 V 2W 250 V 2W 250 V 2W 250 V 2W transparent colourless transparent red transparent yellow transparent green transparent blue screw terminals nickel-plated screw terminals nickel-plated screw terminals nickel-plated screw terminals nickel-plated screw terminals nickel-plated Panel cut-out Order no. complete Order no. single parts Housing Lens 1.60.502.002/1002 1.60.502.098/0000 5.49.227.005/1002 1.60.502.002/1301 1.60.502.098/0000 5.49.227.005/1301 1.60.502.002/1402 1.60.502.098/0000 5.49.227.005/1402 1.60.502.002/1502 1.60.502.098/0000 5.49.227.005/1502 1.60.502.002/1601 1.60.502.098/0000 5.49.227.005/1601 Technical data see page 3 - 52 3 With Socket 3 - 54 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket LUMOTAST FK - Signal lamp Pict.: with socket connector with plug-in socket for PCB Panel cut-out Technical Data General information Form of lens Colour of lens Form of collar 3 Dimensions Length of collar Width of collar Overall height Mounting depth with connector Mounting depth with plug-in socket Mounting hole Mechanical design Mounting Terminals flat lens see order block see order block see order block see order block see order block 30.7 mm 33.4 mm 16.2 mm Lamp socket Lamp Bi-Pin T 1/T 11/4 filament lamp / LED Electrical characteristics Voltage limit max. Power limit max. 24 V 0.7 W Other specifications Degree of protection from front side Weight Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance click quick connection pin connector 4-pol./ plug-in socket IP65 5g -25 C +55 C -40 C +80 C acc. to IEC 60068-2 -14, -30, -33 and -78 With Socket Typical accessories LUMOTAST FK - Signal lamp Description Photo Order no. Additional accessories see page Filament lamp, Bi-Pin T 11/4 base, 12 V 1.90.180.474/0000 5 - 5 Filament lamp, Bi-Pin T 11/4 base, 28 V 1.90.180.475/0000 5 - 5 LED Bi-Pin T 1 superbright, red, 24 V 1.90.690.351/0000 5 - 15 LED Bi-Pin T 1 superbright, green, 24 V 1.90.690.352/0000 5 - 15 LED Bi-Pin T 1 superbright, yellow, 24 V 1.90.690.353/0000 5 - 15 LED Bi-Pin T 1 superbright, blue, 24 V 1.90.690.354/0000 5 - 15 LED Bi-Pin T 1 superbright, white, 24 V 1.90.690.355/0000 5 - 15 3 - 56 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Typical accessories LUMOTAST FK - Signal lamp Description Photo Order no. Additional accessories see page LED Bi-Pin T 1, red, 3 V 1.90.691.026/0000 5 - 15 LED Bi-Pin T 1, green, 3 V 1.90.691.027/0000 5 - 15 LED Bi-Pin T 1, yellow, 3 V 1.90.691.028/0000 5 - 15 Plug-in socket for PCB 5.00.645.036/0000 5 - 23 Cable (flat ribbon cable 10 cm with socket connector and male quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 22 Disassembly tool for LUMOTAST FK 5.05.800.041/0000 5 - 22 Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 23 Socket connector, 4-pin 5.92.025.368/0000 5 - 22 3 LUMOTAST FK - Signal lamp, square collar Pict.: with red lens Panel cut-out With Socket Power limit max. Voltage limit max. Lamp socket Order no. without lens Note 0.7 W 24 V Bi-Pin T 1/T 11/4 1.65.121.906/0000 Please include the desired lens in your order. Technical data see page 3 - 56 Lenses: Lens, square, transparent colourless: 5.49.075.015/1002 Lens, square, transparent red: 5.49.075.015/1306 Lens, square, transparent yellow: 5.49.075.015/1403 Lens, square, transparent green: 5.49.075.015/1505 Lens, square, transparent blue: 5.49.075.015/1607 Do not press in lens in disassembled condition. A notch on the lamp socket identifies the cathode side. Signal lamps Stock items are marked by bold printed order numbers. 3 - 57 Signal lamps with lamp socket LUMOTAST FK - Signal lamp, round collar Pict.: with yellow lens Panel cut-out Power limit max. Voltage limit max. Lamp socket Order no. without lens Note 0.7 W 24 V Bi-Pin T 1/T 11/4 1.65.121.936/0000 Please include the desired lens in your order. Technical data see page 3 - 56 Lenses: Lens, round, transparent colourless: 5.49.075.016/1002 Lens, round, transparent red: 5.49.075.016/1306 Lens, round, transparent yellow: 5.49.075.016/1403 Lens, round, transparent green: 5.49.075.016/1505 Lens, round, transparent blue: 5.49.075.016/1607 Do not press in lens in disassembled condition. A notch on the lamp socket identifies the cathode side. 3 LUMOTAST FK - Signal lamp, rectangular collar Pict.: with blue lens With Socket Panel cut-out Power limit max. Voltage limit max. Lamp socket Order no. without lens Note 0.7 W 24 V Bi-Pin T 1/T 11/4 1.65.121.966/0000 Please include the desired lens in your order. Technical data see page 3 - 56 Lenses: Lens, rectangular, transparent colourless: 5.49.075.017/1002 Lens, rectangular, transparent red: 5.49.075.017/1306 Lens, rectangular, transparent yellow: 5.49.075.017/1403 Lens, rectangular, transparent green: 5.49.075.017/1505 Lens, rectangular, transparent blue: 5.49.075.017/1607 Do not press in lens in disassembled condition. A notch on the lamp socket identifies the cathode side. 3 - 58 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket LUMOTAST 25 - Signal lamp Pict.: with red lens with blue lens Panel cut-out Technical Data General information Form of lens Colour of lens 3 Dimensions Length of collar Width of collar Overall height Mounting depth with connector Mounting depth with plug-in socket Mounting hole Mechanical design Mounting Terminals With Socket square see order block 25 mm 25 mm 9.8 mm 30.7 mm Lamp socket Lamp see order block filament lamp / LED Electrical characteristics Voltage limit max. Power limit max. 24 V 0.7 W Other specifications Degree of protection from front side Weight Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. 33.4 mm 16.2 mm IP65 7g -25 C +70 C -40 C +80 C see order block pin connector 4-pol./ plug-in socket Typical accessories LUMOTAST 25 - Signal lamp Description Photo Order no. Additional accessories see page Filament lamp, Bi-Pin T 11/4 base, 12 V 1.90.180.474/0000 5 - 5 Filament lamp, Bi-Pin T 11/4 base, 28 V 1.90.180.475/0000 5 - 5 LED Bi-Pin T 1 superbright, red, 24 V 1.90.690.351/0000 5 - 15 LED Bi-Pin T 1 superbright, green, 24 V 1.90.690.352/0000 5 - 15 LED Bi-Pin T 1 superbright, yellow, 24 V 1.90.690.353/0000 5 - 15 LED Bi-Pin T 1 superbright, blue, 24 V 1.90.690.354/0000 5 - 15 LED Bi-Pin T 1 superbright, white, 24 V 1.90.690.355/0000 5 - 15 LED Bi-Pin T 1, red, 3 V 1.90.691.026/0000 5 - 15 3 - 60 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Typical accessories LUMOTAST 25 - Signal lamp Description Photo Order no. Additional accessories see page LED Bi-Pin T 1, green, 3 V 1.90.691.027/0000 5 - 15 LED Bi-Pin T 1, yellow, 3 V 1.90.691.028/0000 5 - 15 Plug-in socket for PCB 5.00.645.036/0000 5 - 23 Cable (flat ribbon cable 10 cm with socket connector and male quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 22 Disassembly tool for LUMOTAST 25, RAFIX 16 5.05.800.042/0000 2 - 94 Blanking cap complete with sealing disc and ring nut, square 5.05.800.049/0100 2 - 100, 5 - 26 Label holder, flush, for square collar 5.07.620.004/0000 2 - 96 Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 23 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 21 Legend insert, blank, use only for transparent lenses 5.70.635.000/2000 Legend label 23 x 16 for label holder, without legend 5.73.111.000/0000 Socket connector, 4-pin 5.92.025.368/0000 5 - 22 3 With Socket LUMOTAST 25 - Signal lamp, 24 V, Click" quick-assembly feature Pict.: with red lens Panel cut-out Voltage limit max. Power limit max. Lamp socket Order no. without lens Note 24 V 0.7 W Bi-Pin T 1/T 11/4 1.65.122.906/0000 Please include the desired lens in your order. Technical data see page 3 - 60 Lenses: Lens, square, transparent colourless: 5.49.077.014/1002 Lens, square, transparent red: 5.49.077.014/1306 Lens, square, transparent yellow: 5.49.077.014/1403 Lens, square, transparent green: 5.49.077.014/1505 Lens, square, transparent blue: 5.49.077.014/1607 Do not press in lens in disassembled condition. Note when using a LED: A notch on the lamp identifies the cathode side. Signal lamps Stock items are marked by bold printed order numbers. 3 - 61 Signal lamps with lamp socket LUMOTAST 25 - Signal lamp, 24 V, ring nut fixing Pict.: with blue lens Panel cut-out Voltage limit max. Power limit max. Lamp socket Order no. without lens Note 24 V 0.7 W Bi-Pin T 1/T 11/4 1.65.122.956/0000 Please include the desired lens in your order. Technical data see page 3 - 60 Lenses: Lens, square, transparent colourless: 5.49.077.014/1002 Lens, square, transparent red: 5.49.077.014/1306 Lens, square, transparent yellow: 5.49.077.014/1403 Lens, square, transparent green: 5.49.077.014/1505 Lens, square, transparent blue: 5.49.077.014/1607 Do not press in lens in disassembled condition. Note when using LED: A notch on the lamp socket identifies the cathode side. 3 With Socket 3 - 62 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket LUMOTAST 75 IP40 - Signal lamp with lamp socket T 4.5 Pict.: with blue lens Mounting hole Technical Data General information Form of lens Form of collar Colour of collar 3 With Socket see order block see order block see order block Dimensions Length of collar Width of collar Diameter of collar Overall height Mounting depth Mounting hole see order block see order block see order block 7.5 mm 33.5 mm 16.2 mm Mechanical design Mounting Terminals Lamp socket Lamp ring nut solder terminals T 4.5 filament lamp / LED Electrical characteristics Voltage limit max. Power limit max. Other specifications Degree of protection from front side Weight Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance 35 V 1.2 W IP40 5g -25 C +55 C -40 C +80 C acc. to IEC 60068-2 -14, -30, -33 and -78 Approvals IEC 61058 UL 508 C22.2 No. 14-M91 Typical accessories LUMOTAST 75 IP40 - Signal lamp with lamp socket T 4.5 Description Photo Order no. Additional accessories see page Filament lamp, T 4.5 base, 12 V 1.90.100.022/0000 5 - 6 Filament lamp, T 4.5 base, 24 V 1.90.100.023/0000 5 - 6 LED T 4.5 superbright, red, 24 V 1.90.690.331/0000 5 - 16 3 - 64 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Typical accessories LUMOTAST 75 IP40 - Signal lamp with lamp socket T 4.5 Description Photo Order no. Additional accessories see page LED T 4.5 superbright, green, 24 V 1.90.690.332/0000 5 - 16 LED T 4.5 superbright, yellow, 24 V 1.90.690.333/0000 5 - 16 LED T 4.5 superbright, blue, 24 V 1.90.690.334/0000 5 - 16 LED T 4.5 superbright, white, 24 V 1.90.690.335/0000 5 - 16 LED T 4.5, red, 2-3 V (use external resistor) 1.90.692.001/0000 5 - 16 LED T 4.5, green, 2-3 V (use external resistor) 1.90.692.002/0000 5 - 16 LED T 4.5, yellow, 2-3 V (use external resistor) 1.90.692.003/0000 5 - 16 Blanking cap, black, to cover spare holes, dimensions 18 x 18 mm 5.52.006.020/0103 5 - 26 Blanking cap, black, to cover spare holes, dimensions 18 x 24 mm 5.52.006.021/0100 5 - 26 Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 26 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 21 3 With Socket Signal lamps Stock items are marked by bold printed order numbers. 3 - 65 Signal lamps with lamp socket LUMOTAST 75 IP40 - Signal lamp with lamp socket T 4.5, round collar, protruding lens Pict.: with blue lens Mounting hole Voltage limit max. Power limit max. Lamp socket Colour of collar Order no. without lens 35 V 1.2 W T 4.5 black Note 1.65.111.071/0000 Please include the desired lens and diffuser in your order. Technical data see page 3 - 64 Lenses: Lens, round, transparent colourless, for filament lamp or LED: 5.49.257.011/1002 Lens, round, transparent red, for LED: 5.49.257.011/1301 Lens, round, transparent red, for filament lamp: 5.49.257.011/1303 Lens, round, transparent yellow, for filament lamp or LED: 5.49.257.011/1402 Lens, round, transparent green, for filament lamp: 5.49.257.011/1502 Lens, round, transparent green, for LED: 5.49.257.011/1503 Lens, round, transparent blue, for filament lamp: 5.49.257.011/1601 3 Accessoires: Diffuser, round, for filament lamp, without legend: 5.72.050.000/0202 Diffuser, round, for LED, without legend: 5.72.050.000/0214 LUMOTAST 75 IP40 - Signal lamp, square collar, flush lens With Socket Pict.: with yellow lens Mounting hole Voltage limit max. Power limit max. Lamp socket Colour of collar Order no. without lens 35 V 1.2 W T 4.5 black Note 1.65.111.061/0000 Please include the desired lens and diffuser in your order. Technical data see page 3 - 64 Lenses: Lens, rectangular, transparent colourless, for filament lamp or LED: 5.49.275.036/1002 Lens, rectangular, transparent red, for LED: 5.49.275.036/1301 Lens, rectangular, transparent red, for filament lamp: 5.49.275.036/1303 Lens, rectangular, transparent yellow, for filament lamp or LED: 5.49.275.036/1402 Lens, rectangular, transparent green, for filament lamp: 5.49.275.036/1502 Lens, rectangular, transparent green, for LED: 5.49.275.036/1503 Lens, rectangular, transparent blue, for filament lamp: 5.49.275.036/1601 Accessoires: Diffuser, square, for filament lamp, without legend: 5.73.013.000/0202 Diffuser, square, for LED, without legend: 5.73.013.000/0214 3 - 66 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket LUMOTAST 75 IP40 - Signal lamp, rectangular collar, flush lens Pict.: with green lens Panel cut-out Voltage limit max. Power limit max. Lamp socket Colour of collar Order no. without lens 35 V 1.2 W T 4.5 black Note 1.65.111.051/0000 Please include the desired lens and diffuser in your order. Technical data see page 3 - 64 Lenses: Lens, rectangular, transparent colourless, for filament lamp or LED: 5.49.275.032/1002 Lens, rectangular, transparent red, for LED: 5.49.275.032/1301 Lens, rectangular, transparent red, for filament lamp: 5.49.275.032/1303 Lens, rectangular, transparent yellow, for filament lamp or LED: 5.49.275.032/1402 Lens, rectangular, transparent green, for filament lamp: 5.49.275.032/1502 Lens, rectangular, transparent green, for LED: 5.49.275.032/1503 Lens, rectangular, transparent blue, for filament lamp: 5.49.275.032/1601 Accessoires: Diffuser, rectangular, for filament lamp, without legend: 5.73.012.000/0202 Diffuser, rectangular, for LED, without legend: 5.73.012.000/0214 3 LUMOTAST 75 IP40 - Signal lamp, square collar, protruding lens With Socket Pict.: with red lens Mounting hole Voltage limit max. Power limit max. Lamp socket Colour of collar Order no. without lens 35 V 1.2 W T 4.5 black Note 1.65.111.081/0000 Please include the desired lens and diffuser in your order. Technical data see page 3 - 64 Lenses: Lens, rectangular, transparent colourless, for filament lamp or LED: 5.49.275.036/1002 Lens, rectangular, transparent red, for LED: 5.49.275.036/1301 Lens, rectangular, transparent red, for filament lamp: 5.49.275.036/1303 Lens, rectangular, transparent yellow, for filament lamp or LED: 5.49.275.036/1402 Lens, rectangular, transparent green, for filament lamp: 5.49.275.036/1502 Lens, rectangular, transparent green, for LED: 5.49.275.036/1503 Lens, rectangular, transparent blue, for filament lamp: 5.49.275.036/1601 Accessoires: Diffuser, square, for filament lamp, without legend: 5.73.013.000/0202 Diffuser, square, for LED, without legend: 5.73.013.000/0214 Signal lamps Stock items are marked by bold printed order numbers. 3 - 67 Signal lamps with lamp socket LUMOTAST 75 IP65 - Signal lamp Pict.: with red lens Mounting hole Technical Data General information Form of lens Form of collar Diameter of collar 3 see order block see order block see order block Dimensions Length of collar Width of collar Overall height Mounting depth Mounting hole see order block see order block 10.5 mm 33.5 mm 16.2 mm Mechanical design Mounting Terminals Lamp socket Lamp ring nut solder terminals T 4.5 filament lamp / LED Electrical characteristics Voltage limit max. Power limit max. Other specifications Degree of protection from front side Weight Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. 35 V 1.2 W IP65 5g -25 C +55 C -40 C +80 C Approvals With Socket IEC 61058 UL 508 C22.2 No. 14-M91 Typical accessories LUMOTAST 75 IP65 - Signal lamp Description Photo Order no. Additional accessories see page Filament lamp, T 4.5 base, 12 V 1.90.100.022/0000 5 - 6 Filament lamp, T 4.5 base, 24 V 1.90.100.023/0000 5 - 6 LED T 4.5 superbright, red, 24 V 1.90.690.331/0000 5 - 16 LED T 4.5 superbright, green, 24 V 1.90.690.332/0000 5 - 16 3 - 68 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Typical accessories LUMOTAST 75 IP65 - Signal lamp Description Photo Order no. Additional accessories see page LED T 4.5 superbright, yellow, 24 V 1.90.690.333/0000 5 - 16 LED T 4.5 superbright, blue, 24 V 1.90.690.334/0000 5 - 16 LED T 4.5 superbright, white, 24 V 1.90.690.335/0000 5 - 16 LED T 4.5, red, 2-3 V (use external resistor) 1.90.692.001/0000 5 - 16 LED T 4.5, yellow, 2-3 V (use external resistor) 1.90.692.003/0000 5 - 16 Lamp extractor for lamp diameter 4 mm 1.90.900.002/0000 5 - 5, 5 - 6, 5 - 20 Lamp extractor for lamp diameter 5-6 mm 1.90.900.004/0000 5 - 16, 5 - 20 Blanking cap, black, to cover spare holes, dimensions 18 x 18 mm 5.52.006.020/0103 5 - 26 Blanking cap, black, to cover spare holes, dimensions 18 x 24 mm 5.52.006.021/0100 5 - 26 Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 26 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 21 3 With Socket Signal lamps Stock items are marked by bold printed order numbers. 3 - 69 Signal lamps with lamp socket LUMOTAST 75 IP65 - Signal lamp, flush lens, square collar Pict.: with red lens Mounting hole Voltage limit max. Power limit max. Lamp socket Form of collar Order no. without lens Note 35 V 1.2 W T 4.5 square 1.65.111.066/0000 Please include the desired lens in your order. Technical data see page 3 - 68 Lenses: Lens, square, transparent colourless, for filament lamp or LED: 5.49.277.052/1002 Lens, square, transparent red, for LED: 5.49.277.052/1301 Lens, square, transparent red, for filament lamp: 5.49.277.052/1303 Lens, square, transparent yellow, for filament lamp or LED: 5.49.277.052/1402 Lens, square, transparent green, for filament lamp: 5.49.277.052/1502 Lens, square, transparent green, for LED: 5.49.277.052/1503 Lens, square, transparent blue, for filament lamp: 5.49.277.052/1601 3 Accessoires: Legend insert, square, without legend: 5.70.629.000/2000 For assembly, press the lens as far as possible. LUMOTAST 75 IP65 - Signal lamp, protruding lens, square collar With Socket Pict.: with green lens Mounting hole Voltage limit max. Power limit max. Lamp socket Form of collar Order no. without lens Note 35 V 1.2 W T 4.5 square 1.65.111.086/0000 Please include the desired lens in your order. Technical data see page 3 - 68 Lenses: Lens, square, transparent colourless, for filament lamp or LED: 5.49.277.052/1002 Lens, square, transparent red, for LED: 5.49.277.052/1301 Lens, square, transparent red, for filament lamp: 5.49.277.052/1303 Lens, square, transparent yellow, for filament lamp or LED: 5.49.277.052/1402 Lens, square, transparent green, for filament lamp: 5.49.277.052/1502 Lens, square, transparent green, for LED: 5.49.277.052/1503 Lens, square, transparent blue, for filament lamp: 5.49.277.052/1601 Accessoires: Legend insert, square, without legend: 5.70.629.000/2000 For assembly, press the lens as far as possible. 3 - 70 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket LUMOTAST 75 IP65 - Signal lamp, flush lens, round collar Pict.: with yellow lens Mounting hole Voltage limit max. Power limit max. Lamp socket Form of collar Order no. without lens Note 35 V 1.2 W T 4.5 round 1.65.111.096/0000 Please include the desired lens in your order. Technical data see page 3 - 68 Lenses: Lens, round, transparent colourless, for filament lamp or LED: 5.49.259.013/1002 Lens, round, transparent red, for LED: 5.49.259.013/1301 Lens, round, transparent red, for filament lamp: 5.49.259.013/1303 Lens, round, transparent yellow, for filament lamp or LED: 5.49.259.013/1402 Lens, round, transparent green, for filament lamp: 5.49.259.013/1502 Lens, round, transparent green, for LED: 5.49.259.013/1503 Lens, round, transparent blue, for filament lamp: 5.49.259.013/1601 Accessoires: Legend insert, round, without legend: 5.70.059.000/2000 3 For assembly, press the lens as far as possible. LUMOTAST 75 IP65 - Signal lamp, protruding lens, round collar With Socket Pict.: with blue lens Mounting hole Voltage limit max. Power limit max. Lamp socket Form of collar Order no. without lens Note 35 V 1.2 W T 4.5 round 1.65.111.076/0000 Please include the desired lens in your order. Technical data see page 3 - 68 Lenses: Lens, round, transparent colourless, for filament lamp or LED: 5.49.259.013/1002 Lens, round, transparent red, for LED: 5.49.259.013/1301 Lens, round, transparent red, for filament lamp: 5.49.259.013/1303 Lens, round, transparent yellow, for filament lamp or LED: 5.49.259.013/1402 Lens, round, transparent green, for filament lamp: 5.49.259.013/1502 Lens, round, transparent green, for LED: 5.49.259.013/1503 Lens, round, transparent blue, for filament lamp: 5.49.259.013/1601 Accessoires: Legend insert, round, without legend: 5.70.059.000/2000 For assembly, press the lens as far as possible. Signal lamps Stock items are marked by bold printed order numbers. 3 - 71 Signal lamps with lamp socket LUMOTAST 75 IP65 - Signal lamp, flush lens, rectangular collar Pict.: with colourless lens Panel cut-out Voltage limit max. Power limit max. Lamp socket Form of collar Order no. without lens Note 35 V 1.2 W T 4.5 rectangular 1.65.111.056/0000 Please include the desired lens in your order. Technical data see page 3 - 68 Lenses: Lens, rectangular, transparent colourless, for filament lamp or LED: 5.49.277.058/1002 Lens, rectangular, transparent red, for LED: 5.49.277.058/1301 Lens, rectangular, transparent red, for filament lamp: 5.49.277.058/1303 Lens, rectangular, transparent yellow, for filament lamp or LED: 5.49.277.058/1402 Lens, rectangular, transparent green, for filament lamp: 5.49.277.058/1502 Lens, rectangular, transparent green, for LED: 5.49.277.058/1503 Lens, rectangular, transparent blue, for filament lamp: 5.49.277.058/1601 3 Accessoires: Legend insert, rectangular without legend: 5.70.630.000/2000 For assembly, press the lens as far as possible. With Socket 3 - 72 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket RAFIX 16 - Signal indicator Pict.: transparent yellow Panel cut-out Technical Data 3 General information Form of lens Colour of lens Form of collar see order block see order block see order block Dimensions Collar dimensions Overall height Mounting depth Mounting hole Key grid see order block see order block 30.5 / 44.7 mm 16.2 mm 25 x 25 mm Mechanical design Mounting ring nut Other specifications Degree of protection from front side Operation temperature min. Ambient temp. operating max. without lamp /LED Ambient temp. operating max. with lamp /LED Storage temperature min. Storage temperature max. Environmental restistance IP65 -25 C +70 C +55 C -40 C +85 C acc. to IEC 60068-2 -14, -30, -33 and -78 Approvals With Socket IEC 61058 C22.2 No. 14-M91 Typical accessories RAFIX 16 - Signal indicator Description Photo Order no. Additional accessories see page RAFIX 16 - Lamp socket W 2 x 4.6 d, quick-connect terminals 1.71.212.001/0000 2 - 91 RAFIX 16 - Lamp socket W 2 x 4.6 d, quick-connect terminals 1.71.212.011/0000 2 - 91 LED W 2 x 4.6d superbright, white, 24 V 1.90.690.365/0000 5 - 14 Disassembly tool for LUMOTAST 25, RAFIX 16 5.05.800.042/0000 2 - 94 Label holder, flush, for square collar 5.07.620.004/0000 2 - 96 3 - 74 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Typical accessories RAFIX 16 - Signal indicator Description Photo Fixing spanner for hexagon nut Order no. Additional accessories see page 5.58.002.034/0000 2 - 95 For suitable LEDs and filament lamps, refer to the chapter RAFIX 16 lamp sockets"; for additional accessories, refer to the chapter RAFIX 16 special accessories". RAFIX 16 - Signal indicator, square lens Pict.: transparent green Form of lens Panel cut-out Colour of lens Order no. complete Order no. single parts Housing Lens lens square transparent colourless 1.65.124.001/1002 1.65.124.101/0000 5.49.263.006/1002 lens square transparent red 1.65.124.001/1306 1.65.124.101/0000 5.49.263.006/1306 lens square transparent yellow 1.65.124.001/1403 1.65.124.101/0000 5.49.263.006/1403 lens square transparent green 1.65.124.001/1505 1.65.124.101/0000 5.49.263.006/1505 lens square transparent blue 1.65.124.001/1607 1.65.124.101/0000 5.49.263.006/1607 3 Technical data see page 3 - 74 With Socket Legending can only be made externally on a label holder. Signal lamps Stock items are marked by bold printed order numbers. 3 - 75 Signal lamps with lamp socket RAFIX 16 - Signal indicator, square collar, flush lens Pict.: transparent colourless Form of lens Panel cut-out Colour of lens Order no. complete Order no. single parts Housing Lens flat lens transparent colourless 1.65.124.301/1002 1.65.124.401/0000 5.49.077.011/1002 flat lens transparent red 1.65.124.301/1306 1.65.124.401/0000 5.49.077.011/1306 flat lens transparent yellow 1.65.124.301/1403 1.65.124.401/0000 5.49.077.011/1403 flat lens transparent green 1.65.124.301/1505 1.65.124.401/0000 5.49.077.011/1505 flat lens transparent blue 1.65.124.301/1607 1.65.124.401/0000 5.49.077.011/1607 Technical data see page 3 - 74 3 Accessoires: Legend insert, blank, use only for transparent lenses: 5.70.635.000/2000 RAFIX 16 - Signal indicator, square collar, protruding lens With Socket Pict.: transparent red Form of lens Panel cut-out Colour of lens Order no. complete Order no. single parts Housing Lens protruding lens transparent colourless 1.65.124.351/1002 1.65.124.451/0000 5.49.077.012/1002 protruding lens transparent red 1.65.124.351/1306 1.65.124.451/0000 5.49.077.012/1306 protruding lens transparent yellow 1.65.124.351/1403 1.65.124.451/0000 5.49.077.012/1403 protruding lens transparent green 1.65.124.351/1505 1.65.124.451/0000 5.49.077.012/1505 protruding lens transparent blue 1.65.124.351/1607 1.65.124.451/0000 5.49.077.012/1607 Technical data see page 3 - 74 Accessoires: Legend insert, blank, use only for transparent lenses: 5.70.635.000/2000 3 - 76 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket RAFIX 16 - Signal indicator, round lens Pict.: transparent yellow Form of lens Panel cut-out Colour of lens Order no. complete Order no. single parts Housing Lens lens round transparent colourless 1.65.124.021/1002 1.65.124.101/0000 5.49.263.007/1002 lens round transparent red 1.65.124.021/1306 1.65.124.101/0000 5.49.263.007/1306 lens round transparent yellow 1.65.124.021/1403 1.65.124.101/0000 5.49.263.007/1403 lens round transparent green 1.65.124.021/1505 1.65.124.101/0000 5.49.263.007/1505 Technical data see page 3 - 74 Legending can only be made externally on a label holder. 3 RAFIX 16 - Signal indicator, round collar, flush lens Pict.: transparent yellow Form of lens Panel cut-out Colour of lens Order no. complete With Socket Order no. single parts Housing Lens flat lens transparent colourless 1.65.124.321/1002 1.65.124.421/0000 5.49.259.017/1002 flat lens transparent red 1.65.124.321/1306 1.65.124.421/0000 5.49.259.017/1306 flat lens transparent yellow 1.65.124.321/1403 1.65.124.421/0000 5.49.259.017/1403 flat lens transparent green 1.65.124.321/1505 1.65.124.421/0000 5.49.259.017/1505 flat lens transparent blue 1.65.124.321/1607 1.65.124.421/0000 5.49.259.017/1607 Technical data see page 3 - 74 Accessoires: Legend insert, blank, use only for transparent lenses: 5.70.637.000/2000 Signal lamps Stock items are marked by bold printed order numbers. 3 - 77 Signal lamps with lamp socket RAFIX 16 - Signal indicator, round collar, protruding lens Pict.: transparent yellow Form of lens Panel cut-out Colour of lens Order no. complete Order no. single parts Housing Lens protruding lens transparent colourless 1.65.124.371/1002 1.65.124.471/0000 5.49.259.018/1002 protruding lens transparent red 1.65.124.371/1306 1.65.124.471/0000 5.49.259.018/1306 protruding lens transparent yellow 1.65.124.371/1403 1.65.124.471/0000 5.49.259.018/1403 protruding lens transparent green 1.65.124.371/1505 1.65.124.471/0000 5.49.259.018/1505 protruding lens transparent blue 1.65.124.371/1607 1.65.124.471/0000 5.49.259.018/1607 Technical data see page 3 - 74 3 Accessoires: Legend insert, blank, use only for transparent lenses: 5.70.637.000/2000 RAFIX 16 - Signal indicator, square collar, alignable without gaps, flush lens With Socket Pict.: transparent green Form of lens Panel cut-out Colour of lens Order no. complete Order no. single parts Housing Lens flat lens transparent colourless 1.65.124.551/1002 1.65.124.651/0000 5.49.077.011/1002 flat lens transparent red 1.65.124.551/1306 1.65.124.651/0000 5.49.077.011/1306 flat lens transparent yellow 1.65.124.551/1403 1.65.124.651/0000 5.49.077.011/1403 flat lens transparent green 1.65.124.551/1505 1.65.124.651/0000 5.49.077.011/1505 flat lens transparent blue 1.65.124.551/1607 1.65.124.651/0000 5.49.077.011/1607 Technical data see page 3 - 74 Accessoires: Legend insert, blank, use only for transparent lenses: 5.70.635.000/2000 3 - 78 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket RAFIX 16 - Signal indicator, square collar, alignable without gaps, protruding lens Pict.: transparent red Form of lens Panel cut-out Colour of lens Order no. complete Order no. single parts Housing Lens protruding lens transparent colourless 1.65.124.501/1002 1.65.124.661/0000 5.49.077.012/1002 protruding lens transparent red 1.65.124.501/1306 1.65.124.661/0000 5.49.077.012/1306 protruding lens transparent yellow 1.65.124.501/1403 1.65.124.661/0000 5.49.077.012/1403 protruding lens transparent green 1.65.124.501/1505 1.65.124.661/0000 5.49.077.012/1505 protruding lens transparent blue 1.65.124.501/1607 1.65.124.661/0000 5.49.077.012/1607 Technical data see page 3 - 74 3 Accessoires: Legend insert, blank, use only for transparent lenses: 5.70.635.000/2000 With Socket Signal lamps Stock items are marked by bold printed order numbers. 3 - 79 Signal lamps with lamp socket RAFIX 16 F - Signal indicator Technical Data General information Form of lens Colour of lens Form of collar Colour of collar 3 Dimensions Collar dimensions Overall height Mounting depth with contact block Key grid Mounting hole Mechanical design Mounting Contact function Illumination With Socket see order block see order block see order block see order block see order block see order block 50 mm see order block see order block Other specifications Operating life (operations) Degree of protection from front side Operation temperature min. Ambient temp. operating max. without lamp /LED Ambient temp. operating max. with lamp /LED Storage temperature min. Storage temperature max. Environmental restistance IP65 -25 C +55 C -40 C +85 C acc. to IEC 60068-2 -14, -30, -33 and -78 ring nut yes Approvals IEC 61058 Typical accessories RAFIX 16 F - Signal indicator Description Photo Order no. Additional accessories see page RAFIX 16 - Lamp socket W 2 x 4.6 d, quick-connect terminals 1.71.212.001/0000 2 - 91 RAFIX 16 - Lamp socket W 2 x 4.6 d, quick-connect terminals 1.71.212.011/0000 2 - 91 LED W 2 x 4.6d superbright, white, 24 V 1.90.690.365/0000 5 - 14 3 - 80 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Typical accessories RAFIX 16 F - Signal indicator Description Photo Order no. Additional accessories see page Disassembly tool for LUMOTAST 25, RAFIX 16 5.05.800.042/0000 2 - 94 Fixing spanner for hexagon nut 5.58.002.034/0000 2 - 95 Legend insert, blank, use only for transparent lenses 5.70.635.000/2000 For additional accessories, refer to the chapter RAFIX 16 special accessories". RAFIX 16 F - Signal indicator, flush lens, square black collar M16x1 24,90 0,5 ... 3,50 1,70 26,20 3 Panel cut-out Colour of collar Form of lens Overall height Colour of lens Order no. complete Order no. single parts black flat lens 1.7 mm transparent colourless 1.65.126.301/1000 1.65.126.401/0000 5.49.077.011/1002 black flat lens 1.7 mm transparent red 1.65.126.301/1300 1.65.126.401/0000 5.49.077.011/1306 black flat lens 1.7 mm transparent yellow 1.65.126.301/1400 1.65.126.401/0000 5.49.077.011/1403 black flat lens 1.7 mm transparent green 1.65.126.301/1500 1.65.126.401/0000 5.49.077.011/1505 black flat lens 1.7 mm transparent blue 1.65.126.301/1600 1.65.126.401/0000 5.49.077.011/1607 Housing Lens Technical data see page 3 - 80 Accessoires: Legend insert, blank, use only for transparent lenses: 5.70.635.000/2000 Signal lamps Stock items are marked by bold printed order numbers. 3 - 81 With Socket Signal lamps with lamp socket RAFIX 16 F - Signal indicator, flush lens, round black collar 0.5 ... 3.5 28.00 M16 x1 24.30 1.90 Panel cut-out to IEC 60947-5-1 Colour of collar Form of lens Overall height Colour of lens Order no. complete Order no. single parts black flat lens 1.9 mm transparent colourless 1.65.126.001/1000 1.65.126.101/0000 5.49.259.017/1002 black flat lens 1.9 mm transparent red 1.65.126.001/1300 1.65.126.101/0000 5.49.259.017/1306 black flat lens 1.9 mm transparent yellow 1.65.126.001/1400 1.65.126.101/0000 5.49.259.017/1403 black flat lens 1.9 mm transparent green 1.65.126.001/1500 1.65.126.101/0000 5.49.259.017/1505 black flat lens 1.9 mm transparent blue 1.65.126.001/1600 1.65.126.101/0000 5.49.259.017/1607 Housing Lens Technical data see page 3 - 80 3 RAFIX 16 F - Signal indicator, flush lens, round metallized collar 0.5 ... 3.5 NEW 28.00 M16 x1 24.30 With Socket 1.90 Panel cut-out to IEC 60947-5-1 Colour of collar Form of lens Overall height Colour of lens Order no. complete Order no. single parts metallic flat lens 1.9 mm transparent colourless 1.65.126.011/1000 - - metallic flat lens 1.9 mm transparent red 1.65.126.011/1300 - - metallic flat lens 1.9 mm transparent yellow 1.65.126.011/1400 - - metallic flat lens 1.9 mm transparent green 1.65.126.011/1500 - - metallic flat lens 1.9 mm transparent blue 1.65.126.011/1600 - - Housing Lens Technical data see page 3 - 80 3 - 82 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Signal lamps with lamp socket - BA 9s (MBC/MCC), 18.2 mm Pict.: green Mounting hole Technical Data General information Form of lens Colour of lens Diameter of collar 3 Dimensions Overall height Mounting depth Mounting hole Mechanical design Mounting Terminals Lamp socket Lamp round see order block 22 mm Electrical characteristics Voltage limit max. Power limit max. Other specifications Degree of protection from front side Weight 14 mm 47 mm 18.2 mm 250 V 2W IP65 22 g ring nut solder/quick connector 6.3x0.8 / 2x 2.8x0.8mm BA 9 s filament lamp Approvals With Socket VDE 0710 Typical accessories Signal lamps with lamp socket - BA 9s (MBC/MCC), 18.2 mm Description Photo Order no. Additional accessories see page Filament lamp, BA 9s base (MBC/MCC), 12 - 15 V 1.90.060.132/0000 5 - 7 Filament lamp, BA 9s base (MBC/MCC), 24 - 30 V 1.90.060.133/0000 5 - 7 Filament lamp, BA 9s base (MBC/MCC), 110 - 130 V 1.90.060.137/0000 5 - 7 3 - 84 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Typical accessories Signal lamps with lamp socket - BA 9s (MBC/MCC), 18.2 mm Description Photo Protective sleeve for terminals made of Buna N (NBR) Order no. Additional accessories see page 5.52.011.027/0100 Signal lamps with lamp socket - BA 9s (MBC/MCC), 18.2 mm, round lens Pict.: green Mounting hole Voltage Power Lamp limit max. limit max. Colour of lens 250 V 2W filament lamp 250 V 2W filament lamp 250 V 2W filament lamp 250 V 2W filament lamp transparent colourless transparent red transparent yellow transparent green Order no. complete Order no. single parts Housing Lens 1.63.018.001/1002 1.63.018.091/0000 5.49.205.018/1002 1.63.018.001/1301 1.63.018.091/0000 5.49.205.018/1301 1.63.018.001/1402 1.63.018.091/0000 5.49.205.018/1402 3 1.63.018.001/1502 1.63.018.091/0000 5.49.205.018/1502 Technical data see page 3 - 84 Please order luminous elements separately. When ordering as single parts, please add 1 x sealing ring 5.30.120.009/0100 for each signal lamp to your order. With Socket Signal lamps Stock items are marked by bold printed order numbers. 3 - 85 Signal lamps with lamp socket Signal lamps with lamp socket - E 14, 22.3 mm Pict.: red Panel cut-out Technical Data General information Form of lens Colour of lens Diameter of collar 3 round see order block 28 mm Electrical characteristics Voltage limit max. Power limit max. Other specifications Degree of protection from front side Weight Dimensions Overall height Mounting depth Mounting hole 14 mm 46 mm 22.3 mm Mechanical design Mounting Terminals Lamp socket Lamp ring nut see order block E 14 filament lamp 250 V 2W see order block 21 g Approvals With Socket VDE T 85 Typical accessories Signal lamps with lamp socket - E 14, 22.3 mm Description Photo Order no. Additional accessories see page Filament lamp, E 14 base, 24 - 30 V 1.90.020.033/0000 5 - 10 Sealing ring for IP65 5.30.075.010/0100 5 - 24 Protection against contact to VBG 4 5.50.240.063/0209 5 - 25 Protective sleeve for terminals made of Buna N (NBR) 5.52.011.029/0100 3 - 86 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Typical accessories Signal lamps with lamp socket - E 14, 22.3 mm Description Photo Fixing spanner M 20, M 22, for ring nut Order no. Additional accessories see page 5.58.002.018/0105 5 - 21 Signal lamps with lamp socket - E 14, IP40, 22.3 mm Pict.: red Panel cut-out Voltage Degree of pro- Terminals limit max. tection from front side Colour of lens 250 V IP40 250 V IP40 250 V IP40 250 V IP40 transparent colourless transparent red transparent yellow transparent green screw terminals brass nickel-plated screw terminals brass nickel-plated screw terminals brass nickel-plated screw terminals brass nickel-plated Order no. complete Order no. single parts Housing Lens 1.61.012.011/1002 1.61.012.099/0000 5.00.350.726/1002 1.61.012.011/1301 1.61.012.099/0000 5.00.350.726/1301 1.61.012.011/1402 1.61.012.099/0000 5.00.350.726/1402 1.61.012.011/1502 1.61.012.099/0000 5.00.350.726/1502 3 Technical data see page 3 - 86 Signal lamps with lamp socket - E 14, 22.3 mm, screw-on lens, IP40 With Socket Pict.: yellow Panel cut-out Voltage Degree of pro- Terminals limit max. tection from front side Colour of lens 250 V IP40 250 V IP40 250 V IP40 250 V IP40 transparent colourless transparent red transparent yellow transparent green screw terminals brass nickel-plated screw terminals brass nickel-plated screw terminals brass nickel-plated screw terminals brass nickel-plated Order no. complete Order no. single parts Housing Lens 1.61.012.061/1002 1.61.012.099/0000 5.49.229.006/1002 1.61.012.061/1301 1.61.012.099/0000 5.49.229.006/1301 1.61.012.061/1402 1.61.012.099/0000 5.49.229.006/1402 1.61.012.061/1502 1.61.012.099/0000 5.49.229.006/1502 Technical data see page 3 - 86 Signal lamps Stock items are marked by bold printed order numbers. 3 - 87 Signal lamps with lamp socket RAFIX 22 QR - Signal indicator Pict.: yellow Panel cut-out to IEC 60947-5-1 Technical Data 3 General information Form of lens Colour of lens Legend insert accomodation Form of collar see order block see order block see order block see order block Dimensions Dimensions of collar Overall height Mounting depth Mounting hole Mounting grid see order block see order block 56.4 mm O 22.3 mm 50 x 30 mm Mechanical design Mounting Illuminability ring nut yes Electrical characteristics Protection class - Other specifications Degree of protection from front side Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance IP65 -25 C +70 C -40 C +80 C acc. to IEC 60068-2 -14, -30, -33 and -78 Approvals With Socket IEC 61058 UL 508,C22.2 No. 14-M91 2004 Steel Vessel Rules Rules for the Classification of Steel Ships Classification of Ships....Rules Marine, offshore and industrial use German Lloyds type approval Typical accessories RAFIX 22 QR - Signal indicator Bezeichnung Foto Bestell-Nr. Seitenverweise/ Weiteres Zubehor RAFIX 22 QR contact block AS-I, standard, white LED 1.20.129.121/0000 2 - 157 RAFIX 22 QR - Lamp socket assembly, screw terminals, with coupling 1.71.213.001/0000 2 - 162 RAFIX 22 QR - Lamp socket assembly, screw terminals, with coupling, diode and series resistor 130 V 1.71.213.004/0000 2 - 162 3 - 88 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Typical accessories RAFIX 22 QR - Signal indicator Bezeichnung Foto Bestell-Nr. Seitenverweise/ Weiteres Zubehor RAFIX 22 QR - Lamp socket assembly, spring-type terminals, with coupling 1.71.214.001/0000 2 - 162 Fixing spanner for ring nut and front ring 5.05.800.062/0000 5 - 21 Legend insert without legend, use only in combination with transparent lenses 5.70.803.000/2000 RAFIX 22 QR - Signal indicator, flat, round collar, for legend inserts Pict.: yellow Panel cut-out to IEC 60947-5-1 3 Colour of lens Form of collar Order no. transparent colourless round 1.74.505.501/1000 transparent red round 1.74.505.501/1300 transparent yellow round 1.74.505.501/1400 transparent green round 1.74.505.501/1500 transparent blue round 1.74.505.501/1600 With Socket Technical data see page 3 - 88 Accessoires: Legend insert without legend, use only in combination with transparent lenses.: 5.70.803.000/2000 Signal lamps Stock items are marked by bold printed order numbers. 3 - 89 Signal lamps with lamp socket NEW RAFIX 22 QR - Signal indicator, high, round collar Panel cut-out to IEC 60947-5-1 Colour of lens Form of collar Order no. transparent colourless round 1.74.505.511/1000 transparent red round 1.74.505.511/1300 transparent yellow round 1.74.505.511/1400 transparent green round 1.74.505.511/1500 transparent blue round 1.74.505.511/1600 Technical data see page 3 - 88 3 Legend insert on request RAFIX 22 QR - Signal indicator, flat, square collar, for legend inserts With Socket Pict.: red Panel cut-out to IEC 60947-5-1 Colour of lens Form of collar Order no. transparent colourless square 1.74.505.551/1000 transparent red square 1.74.505.551/1300 transparent yellow square 1.74.505.551/1400 transparent green square 1.74.505.551/1500 transparent blue square 1.74.505.551/1600 Technical data see page 3 - 88 Accessoires: Legend insert without legend, use only in combination with transparent lenses.: 5.70.803.000/2000 3 - 90 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket NEW RAFIX 22 QR - Signal indicator, high, square collar Panel cut-out to IEC 60947-5-1 Colour of lens Form of collar Order no. transparent colourless square 1.74.505.561/1000 transparent colourless square 1.74.505.561/1600 transparent red square 1.74.505.561/1300 transparent yellow square 1.74.505.561/1400 transparent green square 1.74.505.561/1500 Technical data see page 3 - 88 3 Legend insert on request With Socket Signal lamps Stock items are marked by bold printed order numbers. 3 - 91 Signal lamps with lamp socket RAFIX 22 FS - Signal indicator Pict.: yellow red Panel cut-out to IEC 60947-5-1 Technical Data General information Form of lens Colour of lens Form of collar 3 see order block see order block see order block Dimensions Length of collar Overall height Mounting depth Mounting hole Key grid see order block see order block see order block 22.3 mm 30 x 30 mm Mechanical design Mounting Illuminability ring nut yes Mechanical characteristics Robustness min. Other specifications Degree of protection from front side Ambient temp. operating min. Ambient temp. operating max. Approvals Storage temperature min. Storage temperature max. Environmental restistance Salt spray 100 N IP65 -25 C +70 C see order block -40 C +80 C acc. to IEC 60068-2 -14, -30, -33 and -78 IEC 600 68-2-11 Approvals With Socket IEC 60947-5-x, 60904, 60073 UL 508,C22.2 No. 14-M91 Typical accessories RAFIX 22 FS - Signal indicator Description Photo Order no. Additional accessories see page 3 mm LED superbright red 1.90.690.269/0000 2 - 237, 5 - 17 Fixing spanner for ring nut and front ring 5.05.800.062/0000 5 - 21 LED base for signal indicators, height 5 mm 5.30.109.020/0756 2 - 236 RAFIX 22 FS - Socket for LED-Clip, quick-connect terminals 5.55.104.419/0700 2 - 235 3 - 92 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket RAFIX 22 FS - Signal indicator, round collar, flat 1...3mm O 29.80 M 22.00 x1 Pict.: yellow 8.75 9.70 Panel cut-out to IEC 60947-5-1 Form of collar Colour of lens Order no. round transparent colourless 1.74.506.001/1000 round transparent red 1.74.506.001/1300 round transparent yellow 1.74.506.001/1400 round transparent green 1.74.506.001/1500 round transparent blue 1.74.506.001/1600 Technical data see page 3 - 92 3 Legending on request RAFIX 22 FS - Signal indicator, round collar, high NEW Pict.: red With Socket Panel cut-out to IEC 60947-5-1 Form of collar Colour of lens Order no. round transparent colourless 1.74.506.011/1000 round transparent red 1.74.506.011/1300 round transparent yellow 1.74.506.011/1400 round transparent green 1.74.506.011/1500 round transparent blue 1.74.506.011/1600 Technical data see page 3 - 92 Legending on request Signal lamps Stock items are marked by bold printed order numbers. 3 - 93 Signal lamps with lamp socket RAFIX 22 FS - Signal indicator, square collar, flat 1...3mm 29.80 M 22.00 x1 8.75 9.70 Pict.: red Panel cut-out to IEC 60947-5-1 Form of collar Colour of lens Order no. square transparent colourless 1.74.506.051/1000 square transparent red 1.74.506.051/1300 square transparent yellow 1.74.506.051/1400 square transparent green 1.74.506.051/1500 square transparent blue 1.74.506.051/1600 Technical data see page 3 - 92 3 Legending on request RAFIX 22 FS - Signal indicator, round collar, high NEW With Socket Pict.: yellow Panel cut-out to IEC 60947-5-1 Form of collar Colour of lens Order no. square transparent colourless 1.74.506.061/1000 square transparent red 1.74.506.061/1300 square transparent yellow 1.74.506.061/1400 square transparent green 1.74.506.061/1500 square transparent blue 1.74.506.061/1600 Technical data see page 3 - 92 Legending on request 3 - 94 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Signal lamps with lamp socket - E 14, 30.5 mm Pict.: with lens form 1, red with lens form 2, yellow with lens form 3, grun Technical Data General information Form of lens Colour of lens Diameter of collar 3 Dimensions Overall height Mounting depth Mounting hole Mechanical design Mounting Terminals Lamp socket Lamp round see order block 36 mm see order block 58 mm 30,5+0,5 mm Electrical characteristics Voltage limit max. Power limit max. Other specifications Degree of protection from front side Weight 250 V 5W see order block 40 g ring nut quick connector for 2 x 2.8 x 0.8 mm E 14 filament lamp Typical accessories Signal lamps with lamp socket - E 14, 30.5 mm With Socket Description Photo Order no. Additional accessories see page Filament lamp, E 14 base, 24 - 30 V 1.90.020.033/0000 5 - 10 Filament lamp, E 14 base, 24 V 1.90.020.053/0000 5 - 11 Filament lamp, E 14 base, 220 - 260 V 1.90.020.061/0000 5 - 11 Filament lamp, E 14 base, 24 - 30 V 1.90.020.105/0000 5 - 11 Filament lamp, E 14 base, 220 - 260 V 1.90.020.115/0000 5 - 11 Protection against contact to VBG 5 5.50.240.065/0200 5 - 25 Protective sleeve for terminals 5.52.011.031/0100 Fixing spanner M 25, M 30 5.58.002.020/0105 5 - 21 The filament lamps 1.90.020.105/0000 and 1.20.090.115/0000 can only be used in combination with the lens form 2. Because of their height, they support the best illumination of this lens shape. 3 - 96 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Signal lamps with lamp socket - E 14, IP40, 30.5 mm Pict.: with lens form 1 lens form 2 lens form 3 Voltage limit max. Power limit max. Degree of protection from front side Order no. without lens Note 250 V 5W IP40 1.61.021.099/0000 Please include the desired lens in your order. Technical data see page 3 - 96 Lenses: Screw-on lens, form 3, transparent colourless: 5.00.350.013/1002 Screw-on lens, form 3, transparent red: 5.00.350.013/1301 Screw-on lens, form 3, transparent yellow: 5.00.350.013/1402 Screw-on lens, form 3, transparent green: 5.00.350.013/1502 Screw-on lens, form 1, transparent colourless: 5.49.233.005/1002 Screw-on lens, form 1, transparent red: 5.49.233.005/1301 Screw-on lens, form 1, transparent yellow: 5.49.233.005/1402 Screw-on lens, form 1, transparent green: 5.49.233.005/1502 Screw-on lens, form 2, transparent colourless: 5.49.233.008/1002 Screw-on lens, form 2, transparent red: 5.49.233.008/1301 Screw-on lens, form 2, transparent yellow: 5.49.233.008/1402 Screw-on lens, form 2, transparent green: 5.49.233.008/1502 3 Single-wire screw terminal with clamp: 2 x 0.75 to 2.5 mm2, stranded core with wire end sleeve: 2 x 0.75 to 1.5 mm2, quick-connect terminal suitable for 2 x 2.8 x 0.8 tin-plated for soldering. With Socket Signal lamps Stock items are marked by bold printed order numbers. 3 - 97 Signal lamps with lamp socket Signal lamps with lamp socket - BA 15d, 30.5 mm Pict.: with lens form 1, red with lens form 2, yellow with lens form 3, grun Technical Data General information Form of lens Colour of lens Diameter of collar 3 Dimensions Overall height Mounting depth Mounting hole Mechanical design Mounting Terminals Lamp socket Lamp round see order block 36 mm see order block 58 mm 30,5+0,5 mm Electrical characteristics Voltage limit max. Power limit max. Other specifications Degree of protection from front side Weight 250 V 5W see order block 40 g ring nut quick connector for 2 x 2.8 x 0.8 mm BA 15 d filament lamp Typical accessories Signal lamps with lamp socket - BA 15d, 30.5 mm With Socket Description Photo Order no. Additional accessories see page Filament lamp, BA 15d base, 12 - 15 V 1.90.070.003/0000 5 - 8 Filament lamp, BA 15d base, 24 - 30 V 1.90.070.004/0000 5 - 8 Filament lamp, BA 15d base, 24 V 1.90.070.053/0000 5 - 9 Filament lamp, BA 15d base, 220 - 260 V 1.90.070.061/0000 5 - 9 Filament lamp, BA 15d base, 24 - 30 V 1.90.070.105/0000 5 - 9 Protection against contact to VBG 5 5.50.240.065/0200 5 - 25 Protective sleeve for terminals 5.52.011.031/0100 Fixing spanner M 25, M 30 5.58.002.020/0105 5 - 21 The filament lamps 1.90.070.105/0000 can only be used in combination with the lens form 2. Because of their height, they support the best illumination of this lens shape. 3 - 98 Stock items are marked by bold printed order numbers. Signal lamps Signal lamps with lamp socket Signal lamps with lamp socket - BA 15d, IP40, 30.5 mm Pict.: with lens form 1 lens form 2 lens form 3 Voltage limit max. Power limit max. Degree of protection from front side Colour of lens Order no. without lens Note 250 V 5W IP40 - 1.63.521.099/0000 Please include the desired lens in your order. Technical data see page 3 - 98 Lenses: Screw-on lens, form 3, transparent colourless: 5.00.350.013/1002 Screw-on lens, form 3, transparent red: 5.00.350.013/1301 Screw-on lens, form 3, transparent yellow: 5.00.350.013/1402 Screw-on lens, form 3, transparent green: 5.00.350.013/1502 Screw-on lens, form 1, transparent colourless: 5.49.233.005/1002 Screw-on lens, form 1, transparent red: 5.49.233.005/1301 Screw-on lens, form 1, transparent yellow: 5.49.233.005/1402 Screw-on lens, form 1, transparent green: 5.49.233.005/1502 Screw-on lens, form 2, transparent colourless: 5.49.233.008/1002 Screw-on lens, form 2, transparent red: 5.49.233.008/1301 Screw-on lens, form 2, transparent yellow: 5.49.233.008/1402 Screw-on lens, form 2, transparent green: 5.49.233.008/1502 3 Single-wire screw terminal with clamp: 2 x 0.75 to 2.5 mm2, stranded core with wire end sleeve: 2 x 0.75 to 1.5 mm2, quick-connect terminal suitable for 6.8 x 0.8 mm / 2 x 2.8 x 0.8 mm, tin-plated for soldering. With Socket Signal lamps Stock items are marked by bold printed order numbers. 3 - 99 Panel mounting sockets General Data Sockets to accommodate filament lamps and LEDs with bases. 3 Content Panel mounting sockets - W 2 x 4.6d Panel mounting sockets - W 2 x 4.6d 3 - 102 3 - 103 Panel mounting sockets - Tubular lamp holders Panel mounting sockets - Tubular lamp holders 3 - 104 3 - 104 Panel mounting sockets - BA 15d Panel mounting sockets - BA 15d 3 - 106 3 - 106 Socket Signal lamps 3 - 101 Panel mounting sockets Panel mounting sockets - W 2 x 4.6d Technical Data Mechanical design Mounting Terminals Lamp socket 3 see order block see order block W 2 x 4.6d Electrical characteristics Limit values 35 V/1.5 W Other specifications Weight 1g Typical accessories Panel mounting sockets - W 2 x 4.6d Description Photo Order no. Additional accessories see page Filament lamp, W 2 x 4.6d base, 24 - 30 V 1.90.120.005/0000 5 - 4 Filament lamp, W 2 x 4.6d base, 60 V 1.90.120.009/0000 5 - 4 Filament lamp, W 2 x 4.6d base, 48 V 1.90.120.010/0000 5 - 4 Filament lamp, W 2 x 4.6d base, 24 V 1.90.120.011/0000 5 - 4 LED W 2 x 4.6d superbright, red, 24 V 1.90.690.361/0000 5 - 14 LED W 2 x 4.6d superbright, green, 24 V 1.90.690.362/0000 5 - 14 LED W 2 x 4.6d superbright, yellow, 24 V 1.90.690.363/0000 5 - 14 LED W 2 x 4.6d superbright, blue, 24 V 1.90.690.364/0000 5 - 14 LED W 2 x 4.6d superbright, white, 24 V 1.90.690.365/0000 5 - 14 Socket 3 - 102 Stock items are marked by bold printed order numbers. Signal lamps Panel mounting sockets Panel mounting sockets - W 2 x 4.6d Lamp socket Limit values Terminals Mounting Order no. W 2 x 4.6d 35 V/1.5 W 2 spring contacts 90 turn 1.72.401.021/0000 Technical data see page 3 - 102 3 Socket Signal lamps Stock items are marked by bold printed order numbers. 3 - 103 Panel mounting sockets Panel mounting sockets - Tubular lamp holders Technical Data Mechanical design Mounting Terminals Lamp socket Insulation group 3 cut-out in housing screw terminals S 8.5 according to VDE 0110 b/DIN 57110 b Electrical characteristics Limit values 2 A / 35 V Other specifications Weight 11 g Typical accessories Panel mounting sockets - Tubular lamp holders Description Photo Order no. Additional accessories see page Filament lamp, S 8.5 base, 24 V, shape L 1.90.111.003/0000 5 - 12 Filament lamp, S 8.5 base, 24 V, shape K 1.90.111.103/0000 5 - 12 Panel mounting sockets - Tubular lamp holders Socket Lamp socket Limit values Terminals Mounting Order no. S 8.5 2 A/35 V screw terminals cut-out in housing 1.02.570.021/0000 3 - 104 Stock items are marked by bold printed order numbers. Signal lamps Panel mounting sockets Panel mounting sockets - BA 15d Technical Data Mechanical design Mounting Terminals Lamp socket 3 see order block see order block BA 15 d Electrical characteristics Limit values see order block Other specifications Weight see order block Approvals VDE T 135, max. 4 W/2A Panel mounting sockets - BA 15d Socket Lamp socket Limit values Terminals Mounting Order no. BA 15 d 250 V/4 W quick connector cut-out in housing 1.02.582.002/0000 3 - 106 Stock items are marked by bold printed order numbers. Signal lamps