Electrical rotation angle 2
Torque
Life3
rotational
stop 0.4 to 2 Ncm. (0.6 to 2.7 in-oz)
> 5 Ncm. (<7 in-oz)
Mechanical rotation angle 1235° ± 5°
220° ± 20°
up to 100K cycles
Range of values 1100 Rn 5M (Decad. 1.0 - 2.0 - 2.2 - 2.5 - 4.7 - 5.0)
Tolerance 1
Max. voltage
Nominal power 50ºC (122°F) 3
200 VDC (lin) 100 VDC (no lin)
± 20%
± 30%
0.15 W (lin) 0.07 W (no lin)
100 Rn 1M
1M Rn 5M
Taper Linear ; Log; Alog. (Log. & Alog. only Rn 1K)
Residual resistance
Equivalent noise resistance
0.5% Rn (5 min.)
3% Rn (3 min.)
Operating temperature 2,3 -25ºC to +70ºC (-13ºF to + 158ºF)
3 Others: check availability.
1 Others: check availability. 2 Up to 85°C depending on application.
3 For higher specifications please visit our PTC10 series.
1 360º version available: ST10 2 333º version available: ST10
For reflow soldering capable models please see our PS10 datasheet.
Automotive / Appliance control - sensor
Piher Sensing Systems
Our product competencies and services:
Potentiometers | Position / Angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
Main features
• Carbon resistive element.
• Dust proof enclosure.
• Polyester substrate.
• Wiper positioned at initial, 50%
or fully clockwise.
Also upon request:
• Available in magazines for
automatic insertion.
• Long life model for low-cost
control potentiometer
applications.
• Self extinguishable plastic UL
94V-0.
• Cut track option (open circuit).
• Special tapers.
• Mechanical detents.
• Low torque version.
• Special switch option.
• 3% Linearity and 100K cycles
mechanical life.
Description
Mechatronics
Electromechanical
Controls
Sensors
Mechanical specifications
Electrical specifications
The PT10 potentiometer offers
control where frequent
adjustment is required. The
shaftless design allows for
employment of different
engagement mechanisms, such
as a customized shaft, a motor
control or a human interface
adjustment.
This potentiometer can also
contr ol variabl e outputs including
frequency, change in motor speed
or volume.
Typical applications include test
and measurement equipment,
consumer electronics,
appliances, small engines,
robotics, motion c ontrollers, and
medical equipment control
panels.
This datasheet shows you the
basics of the PT10 potentiometer
that is quite versatil e and easy t o
taylor. Do not hesitate to contact
Piher for advice.
10 mm carbon potentiometer
PT10
-Page 1 of 10-
10 mm carbon potentiometer
PT10
505 = 5 M
(See note 9)
positive tolerance
Code:
Piher Sensing Systems
Our product competencies and services:
Potentiometers | Position / Angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
Automotive / Appliance control - sensor
How to order Optional extras
Mechatronics
Electromechanical
Controls
Sensors
- = standard
L= Low torque
H01L
Rotors
B
G
K
L
M
R
W
X
Y
Z
(See note 1)
PT10
Series
101
Value
A
Taper
A = Lin.
B = Log.
C = Alog.
Detents
PackagingCut track
- = none
PCI = Initial
PCF = Final
Life
- = 1K cycles
E= 10K cycles
Shaft/rotor colour
RO = Red
NE = Black
VE = Green
AM = Yellow
AZ = Blue
MA = Brown
GR = Grey
NA = Orange
CR = Cream
Wiper position
- = Initial
PM = 50%
PF = Final
2020
Tolerance
0505 = ± 5%
0707 = ± 7%
1010 = ± 10%
2020 = ± 20%
3030 = ± 30%
Torque
- = none
PAI
PAM
PAF
P1I
P1F
P02
.
.
.
P16
000 = CM
S
101 = 100
504 = 500 K
inserted
shaft
Mounting
method
H01
H02
H05
H07
H10
V05
V10
V11
V13
(See note 2)
--
- - - - - - - -
inserted
knob
Standard default options
How to order examples
PT10LH01-103A2020-S
10mm potentiometer with rotor “L” (arrow shape), H01 mounting method
(horizontal adjustment), 10K value and 20% resistive tolerance.
Cut track No
Detents None
Packing Bulk
Non flammable No
Rotor colour White
S
haft colour Natural
(not coloured)
Wiper
send
position Initial
Torque
0.4 to 2 Ncm.
Life 1000 cycles
PT10WV05-104A1010-9-NE-S
10mm potentiometer with rotor W (factory pre-inserted shaft), V05
mounting method (vertical adjustment), 100K value,10% resistive
tolerance and black shaft.
Low Torque: 1 Ncm
No detent option available for low torque models.
(9)
If you wish to use your own custom plastic shaft/knob/actuator please contact Piher for advice about compatible materials.
(10)
(6) Magazines: not available with the H10, V05 and V13 models, nor with adjustment types X, W, Y, Z.
(7) Non flammable: housing, rotor and shaft. According to UL 94V-0
(5) Standard: 1000 cycles. Long life “E”: 10.000 cycles. Others: check availability..
Example: +7%
-5% 07 05 negative tolerance
(4) Other tolerances: check availability.
NOTES: (1) "Z" adjustment only available on "H" versions. Rotor "G" only available in purple color (shaft/rotor color code "VI").
(2) V05 terminals material: only brass.
First two digits of the value.
Code:
Example: 10 1Numb of zeros
(3) Value 000 = CM = Switch version (contact us)
SMD versions available (PS10 series).
High and low ohmic values may not allow all tolerances: check availability.
Potentiometer without shaft: only rotor Potentiometer with shaft: only shaft
(8) Colour shaft/rotor:
Endles rotation version available (ST10).
-Page 2 of 10-
(See note 3)
(See note 7)
Flammability
- = standard
I =
Non flammable
(See note 8)
Shaft/Thum.
- = none
1 = Fig. 1
2 = Fig. 2
18 = Fig. 18
(See note 6)
- = bulk
T = magazines
(See note 10)
(See note 4)
(See note 5)
10 mm carbon potentiometer
PT10
V05
V13
5
5
Piher Sensing Systems
Our product competencies and services:
Potentiometers | Position / Angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
Automotive / Appliance control - sensor
Mechatronics
Electromechanical
Controls
Sensors
Mounting methods. Dimensions
Rotors (Default delivery is at initial position. Wipers are shown positioned at 50% for the picture)
V = horizontal mounting – vertical adjustment H = vertical mounting – horizontal adjustment
5
5
A = Initial S = Wiper E = Final
AE
S
5
4.8
63.5
+0.2
+0.2
10
5
5 5
10
4
1.3+0.1
10.3
+0.1
3.5
1
+0.1
2.5
4.8
6.5 3.5
+0.2
+0.2
5
5
5
2.5
3
1.3+0.1
10.3
+0.1
3.5
1
+0.1
2.5
5
2.5
V11
5
55
4.8
10
5
5 5
10
4
1.3
10.3
63.3
5
4.8
10
5
5 5
10
4
1.3
10.3
63.3
With knob/humbwheel inserted
Z
= Adjustable from collector side (default knob is 5034).
Y
= Adjustable from terminal side (default knob is 5034).
3.5
7
6.
5
1.95
3
0.8
3.5 7
3
0.8
6.5
3.75
B
51.4º
1.7
2
W =
Adjustable from
terminal side
L
With inserted shaft.
All rotors are thru-hole.
Without shaft or knob.
0.7
2.2
2.2
K = Cross slot
2.1
0.8
L = Screwdriver
R
1.6
2
2
G
= Hexagonal
2
M = Hexagonal X =
Adjustable from
collector side
L
(50%)
INITIAL
V10
-Page 3 of 10-
10 mm carbon potentiometer
PT10
H02
SMD versions (see PS10 datasheet)
V13
2
5
2
2
2.5 2.5
5.7
5.75
10.9
2.05
5.15
10.3
2.5 2.5
9.4
2.5
H07
2.5
H10
2.5
H01
H05
6
0.9-0.1
1.6
Detail
+0.3
-0.1
2.5
2.5
Piher Sensing Systems
Our product competencies and services:
Potentiometers | Position / Angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
Automotive / Appliance control - sensor
Mechatronics
Electromechanical
Controls
Sensors
Mounting methods. Dimensions
+0.2
2.5
12.1
2.5
4.8
2.5
+0.2
10.3
+0.1
3.5
1
+0.1
7
+0.2
2.5
5
1.3
+0.1
AE
S
A = Initial S = Wiper E = Final
+0.1
2.5
+0.2
2.5
12.1
4.8+0.2
5
10.3
3.5
1
+0.1
7+0.2
5
5
1.3+0.1
+0.2
9.3
6+0.2
9.3
3.3 7
V = horizontal mounting – vertical adjustment H = vertical mounting – horizontal adjustment
2.5
12.1
10.3
1
7
4.8
2.5
5
2.5
1.3
2.5
10.7
10.3
3.5
1
3.8
5
1.3
4.5
3.8
10.3
4.8
3.8
5
2.6
2.5
12.1
3.5
1
7
3.8
3.5 7.7
3.3
2.5
12.1
4.8
5
10.3
1
7
5
5
1.3
3.3
check availability
Crimped terminals - detail
V11, V13, H02, H10 models feature “crimped” terminals that provide greater
stability during the soldering process.
-Page 4 of 10-
10 mm carbon potentiometer
PT10
5
Piher Sensing Systems
Our product competencies and services:
Potentiometers | Position / Angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
Automotive / Appliance control - sensor
Mechatronics
Electromechanical
Controls
Sensors
Standard values - tolerances
Detents
Standard mechanical life is 500
cycles.
Long life versions are available
under request and have the
following characteristics at Tª:
- Potentiometers with 1 to 3
detents: up to 10K cycles
- Potentiometers with 4 and mor e
detents: up to 5K cycles
Please consult y our neares t Piher
supplier if unique non-
overlapping values at each detent
position or LOG/ALOG tapers are
required.
Different output voltage values
can be matched at each detent
position (see next page).
Detent torque can vary from 1.2
to 2.5 times the standard
potentiometer torque.
For V05 mounting: check
availability.
For mor e than 16 detents versions
please contact your nearest
PIHER authorised distributor.
For custom voltage outputs in any detent position see page 6.
Relative detent positions
along the total mechanic al
travel.
Unles s otherwise specified
the detents are evenly
spaced (using the end
points
as reference)
Detents detail.
(7 detents
example)
Special custom taper example.
(contact at sales@piher.net)
100% Rn
A
B
A = Linear
B = Log.
C = Alog.
Standard
C
Tapers
R 2 + 5%
P07
P06
P08 P10
P09 P16
4.8
10
10.3
39º
-Page 5 of 10-
P02P1FP1i
P05
P04
P03
PAM
PID
A
A= 26º
B= 27.5º
PFD
A
PAI
BB
Wiper
position
PAF
BB
Wiper
position
(wiper positioned at initial) (wiper positioned at final)
Resistance 100 200 220 250 470 500 1K 2K 2.2K 2.5K 4.7K 5K 10K 20K 22K 25K 47K 50K 100K 200K 220K 250K 470K 500K 1M 2M 2.5M 4.7M 5M
How to order code 101 201 221 251 471 501 102 202 222 252 472 502 103 203 223 253 473 503 104 204 224 254 474 504 105 205 255 475 505
Standard tolerance 20% 30%
10 mm carbon potentiometer
PT10
°
6
2
EA
Constant value zones can be combined with strategically located stops matching the flat areas of the output.
If you require this feature, please, send us your requirements to sales@piher.net
Piher Sensing Systems
Our product competencies and services:
Potentiometers | Position / Angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
Automotive / Appliance control - sensor
Stepped outputs Stepped outputs
Mechatronics
Electromechanical
Controls
Sensors
PIHER’s potentiometers can
feature special stepped outputs
or ‘constant voltage zones’ for
the 10mm and 15mm product
families.
These constant voltage zones
can be combined with PIHER’s
mechanical detents to provide
exact alignment between the
electrical output (flat areas)
and the mechanical detent
position. The result is a higher
level of precision in controlling
lighting, temperature, motor or
other electronic control
systems.
In addition to established
catalogue detent
configurations, we will design
and manufacture any other
configuration on our tried-and-
tested carbon/cermet &
THM/SMD potentiometer
technology and processes.
With its precise control
capabilities, our 10mm and
15mm potentiometers series
are well suited for many
consumer applications such as
lighting (dimmers), power hand
tools, relays, timers and HVAC
systems.
100%
0º 234º
SA E
S
By combining the constant value zones with the detents, engineers
can align the same voltage values with each of the detent stops
when rotating the control both forward and backward.
This provides clear mechanical positions that are not only repeatable,
but perfectly aligned electrical outputs at each of the (detent) angles.
Piher’s detents also prevent output values from changing due to
vibration or accidental rotor movements, furthering reliable control
consistency.
Wiper position
2
3
456
7
8
9
110
when the potentiometer’s wiper position is located at detent
nº9, the output votage will be 88.9% Un ± % tolerance.
Improved repeatability
Stepped output s version example (10 step s version):
Unique, non-overlapping values at each stop (detent position)
It prevents changes in the output value due to light vibration or accidental rotor micro-movements
Fully customisable according to customer´s needs
Cost effective replacement for absolute encoders
Main advantages
Absolute encoders can easily be
replaced connecting the potentiometer to
the microprocessor’s
analogue input.
Design tip. Cost-effectiveness
E
A== = = = = ===
88.9% Un
77.7% Un
66.6% Un
55.5% Un
44.4% Un
33.3% Un
22.2% Un
11.1% Un
0% Un / 0º
100% Un
50%
2 3 4 5 6 7 8 9
110
-Page 6 of 10-
10 mm carbon potentiometer
PT10
2.6
8.1
6.75
25.5
15.2
25.5
12.5
3.7
5
10
10.4
Piher Sensing Systems
Our product competencies and services:
Potentiometers | Position / Angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
Automotive / Appliance control - sensor
Shafts
Mechatronics
Electromechanical
Controls
Sensors
4.9
15.2
Fig. 12 / Ref. 6052 Fig. 14 / Ref. 5055
4.5
3.3
Fig. 13 / Ref. 5121
8.1
6.75
For G and M rotor types, top view.
4.9 4.9 4.9
Fig. 11 / Ref. 5027Fig. 7 / Ref. 5115 Fig. 8 / Ref. 5116 Fig. 9 / Ref. 5119 Fig. 10 / Ref. 5120
4.9
3.1
2.6
8.1
8.4
35
34
-Page 7 of 10-
Fig. 2 / Ref. 5053 Fig. 3 / Ref. 5012 Fig. 6 / Ref. 5035Fig. 1 / Ref. 5016 Fig. 4 / Ref. 6053
10 mm carbon potentiometer
PT10
5
12
Mechatronics
Electromechanical
Controls
Sensors
Piher Sensing Systems
Our product competencies and services:
Potentiometers | Position / Angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
Automotive / Appliance control - sensor
By default, shafts, knobs &
thumweels are delivered
unassembled.
Mounted shafts, knobs &
thumbweels can be delivered at
specific positions (a drawing must
be provided by the customer).
If you need the shaft or knob to
be deliver ed as sembl ed from the
factory, please select the
appropriate rotor in the part
number: X, W, Y or Z.
The plastic col or c an be st ated in
the part number. Non flammable
plastic can be ordered too.
If the potentiometer is ordered
with non flamable plastic
materials (UL 94V0) then the shaft
or knob will be deliver ed with non
flamable plastic too.
If you wish to use your own plas tic
shaft/knob/actuator, please,
contact Piher for advice about
compatible materials.
Knobs/thumbwheels
For G and M rotor types, top view.
Fig. 5 / Ref. 5034
11.5
1
Fig. 17 / Ref. 5062
21 1.5
Fig. 15 / Ref. 6008
9.5
1
Fig. 16 / Ref. 5039
Fig. 18 / Ref. 6064 Upon request.
2- GANG Plastic Knob/ Plastic Shaft
INITIAL
CCW
P.F.
FINAL
CW
P.M.
50% +20
º
Positioning
Std. Position = CCW. Other delivery positions upon request.
-Page 8 of 10-
Numbered Thumbweel
19 1
Marking: configurable number of positions
Example of four positions marking pictured
For R rotor type only
5
5
2.5
Ø1.3
25
13
Ø6
12.75
10 mm carbon potentiometer
PT10
1
1
0
0
A
E
50 %
Mechanical rotation angle: 45º±5º
CONTACT
CONTACT
1
1
0
0
A
E
50 %
Mechanical rotation angle: 235º±5º
CONTACT
CONTACT
detent example detent example
Piher Sensing Systems
Our product competencies and services:
Potentiometers | Position / Angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
Automotive / Appliance control - sensor
Mechatronics
Electromechanical
Controls
Sensors
Switch versions
Cut track (open circuit feature)
Packaging
Switch
standard specs.
S
E
A
Power Rating:
24V / 15mA
ON position resistance:
5
Insulation Resistance:
30 M
A E A S E A E
A S E
A = Initial S = Wiper E = Final. Other configurations available upon request.
CCW on-off (A)
PCI
Cut track at the beginning
of the travel.
CW on-off (E)
PCF
Cut track at the end
of the travel
A = Initial
S = Wiper
E = Final
ESA
They can be delivered with or withouth detents/stops.
(D48, rotor shown at final position)
D48 Switch code example A80 Switch code
45º
45º
-Page 9 of 10-
7.6
18.9
540+1.5
Magazines for PT10 V
Also crimped term. V11
12
13.5
540
+1.5
Magazines for PT10 H01 and H05
Also crimped term. H02
Default packaging is bulk (boxes).
Without shaft
Model Units per box
1000 (80 x 85 x 185 mm.)
With thumbwheel
800 (80 x 85 x 185 mm.)
With shaft
400 (80 x 85 x 185 mm.)
Magazines for automatic insertion are available with 50pcs per magazine.
Note: Piher products can be adapted to meet customer’s requirements.
Due to continuous process improvement, specifications are subject to change without notice.
10 mm carbon potentiometer
PT10
Out of range values may not comply with these results.
For other tests or the full range of tests, please, contact us.
50 70
W
100
%
(%)
40
%
C
Piher Sensors & Controls SA
Polígono Industrial Municipal
Vial T2, 22,
31500 Tudela - Spain.
t. +34-948-820450
f. +34-948-824050
sales@piher.net
www.piher.net
Piher Sensing Systems
Our product competencies and services:
Potentiometers | Position / Angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
Automotive / Appliance control - sensor
Recommended
connections
Recommended connection
scheme for Piher´s position
sensors
(voltage divider)
Tests
Disclaimer
The product inf ormation in this c atal ogue is for r ef er enc e purposes. Pl ease consult f or the most up to dat e and accur ate
design information.
Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Piher”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product described herein.
Piher disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Piher’s terms and conditions of sale, including but not limited to the warranty expressed therein,
which apply to these products.
No licence, e xpress or implied, by estoppel or otherwise, t o any intellectual property rights is gr anted by this document
or by any conduct of Piher.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Piher products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Piher for any damages arising or resulting
from such use or sale. Please contact authorised Piher personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Information cont ained in and/or attached t o this catal ogue may be subject t o export c ontr ol regulations of the Eur opean
Community, USA, or other countries. Each recipient of this document is responsible to ensure that usage and/or
transfer of any information contained in this document complies with all relevant export control regulations. If you
are in any doubt about the export control restrictions that apply to this information, please contact the sender
immediately. For any Piher International Corp. Exports, Note: All products / technologies are EAR99 Classified
commodities. Exports fr om the Unit ed St at es are in accordance with the Export Administration Regulations. Div er sion
contrary to US law is prohibited.
Piher is an AmphenolTM company.
Power rating curve
For higher nominal po wer pl ease
visit our PTC-10 cermet
potentiometer.
Contact
Mechatronics
Electromechanical
Controls
Sensors
rev150518
Pb
A
c
c
o
r
d
i
n
g
t
o
E
L
V
(
2
0
0
0
/
5
3
/
E
C
)
/
R
o
H
S
3
(
2
0
1
5
/
8
6
3
/
E
U
)
Online product configurator
-Page 10 of 10-
Typical variations
Electrical life
Mechanical life (cycles)
Temperature coefficient
Thermal cycling
Damp heat
Vibration (for each plane x,y,z)
±5 %
±3 % (Rn < 1 M )
±300 ppm (Rn <100 K )
±2.5 %
±5 %
±2 % RAD
RL
RL 100 x R
VCC
C
1000 h. @ 50ºC; 0.15 W
1000 @ 10 CPM ...15 CPM
–25ºC; +70ºC
16 h. @ 85ºC; 2h. @ -25ºC
500 h. @ 40ºC @ 95% HR
2 h. @ 10 Hz. ... 55 Hz.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Piher:
PT10WH01-505A2020 01 CR PT10LH01-472A2020 PT10LV10-502A2020 PT10MH2.5-68KA PT10TH01-
103A20205CM 5116 (CREAM) PT10YV10252A2020 PT10MH01-204A2020 PT10LV05-103A2020E
PT10YV10502A2020 PT10MV10-503A2020 PT10MH01254A2020 PT10LH01-00039 PT10YV10-473A2020
PT10LH01-205A3030 PT10MH01-253A2020 PT10MH01-101A2020 PT10LH01-201A2020 PT10MV10-255A3030
PT10MV10-252A2020 PT10WH2.5-10K-A9 PT10MH01-202A2020 PT10MH01-205A3030 PT10LH01-474A2020
PT10LH01-255A3030 PT10LH01-252A2020 PT10MH01-102A2020 PT10MH01-505A3030 PT10MH01-105A2020
PT10MV10-204A2020 PT10LV20KC PT10MV10-104A2020 PT10LH01-204A2020 PT10MV10-251A2020
PT10MV10-201A2020 PT10XH01505A303001NE PT10LV 220A PT10LV10-251A2020 PT10LV10-201A2020
5116NEI (BLACK) PT10XV103A2020-9NE PT10MV10-501A2020 PT10YV11 254A2020 PT10LH01-223A2020
PT10LH01-254A2020 PT10WH01-253A2020-1CRPM PT10MH01-504A2020 PT10MH01-505A3050 JPEPL5012NE
PT10MH01-223A2020 PT10MH01-203A2020 PT10MV10-101A2020 PT10MH01-501A2020 PT10LV10-00258-
PT10LV10-502A2020 PT10LV10-473A2020 PT10MV10-103A2020 PT10YV11 253A2020 PT10LH01-00037-
PT10LH01-503A2020 PT10MH01-201A2020 5115CR PT10MH01-251A2020 PT10WH01505A303001NE
PT10WH01-504A2020-1CRPM PT10MH01205A3030 PT10WH01-505A3050 01 CR PT10LV10K PT10MV10-
203A2020 PT10MV10-223A2020 PT10MV10-202A2020 PT10MV10-505A3030 PT10MV10-502A2020 PT10MV10-
205A3030 PT10MH01-252A2020 PT10MH01-255A3030 PT10WH01-505A3030 01 CR PT10YV11 502A2020
PT10MH01-503A2020 PT10LH01-503A2020 PT10MV10-253A2020 PT10MV10-102A2020 PT10MV10-105A2020
PT10MH01-103A2020 5034CR PT10MV10-151A2020 PT10YV10-105A2020-5NE PT10YV10-105A2020-5CR
PT10MV10-504A2020 PT10MV10-224A2020 PT10MV10-254A2020 PT10YV10103A2020 PT10LV05-202A2020E
PT10MH01-151A2020 PT10LH01-251A2020 PT10YV10203A2020 PT10WH2.5-5KA-1 PT10MH01-224A2020
PT10LH01-103B2020 PT10LV10-225A3030 PT10V10-223A2020 PT10YV11 101A2020