Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E6.pdf 01.9.27
34
7
Ceramic Trimmer Capacitors
TZ03 Series
■ Features
1. Color coded case facilitates identification of
capacitance range.
2. Sealed construction prevents the penetration of
flux and dust.
3. Available in three adjustment styles : Top / Rear /
Side.
4. Available in both tape and reel and magazine
packaging for automatic insertion.
5. +(Cross-shaped) slot enables automatic adjustment.
■ Applications
•Car audio systems •Car clocks
•Stereos •Radio cassette tape recorders
•Cordless telephones •Video games
•Compact radio equipments •Remote keyless entry systems
•Burglarproof devices
Tolerance:±0.5
in mm
6 dia.
2.5±0.2 dia.
0.5±0.2 Depth 0.5 min.
6
6.6
3.1 3.5
0.25±0.05 0.2±0.05 1.0±0.11.2±0.1
3.34.8
4
B Type
2.5±0.2 dia.
0.5±0.2 Depth 0.5 min .
6 dia.
4
6
4.83.5
1.0±0.1
0.2±0.050.25±0.05
1.0±0.1
Tolerance:±0.5
in mm
E Type
2.5±0.2 dia.
0.5±0.2 Depth 0.5 min.
6 dia.
Tolerance:±0.5
in mm
4
6
1.0±0.1
1.0±0.1
6.6
0.2±0.05
0.25±0.05
4.83.3
F Type
2.5±0.2 dia.
0.5±0.2 Depth 0.5 min.
6.0 dia.
6.0
1.2±0.1
7.8
6.4
3.0 3.4 1.0±0.1
Tolerance:±0.5
in mm
0.25±
0.05
0.2±
0.05
4.8 3.0
4.0
N Type
0.5±0.2 Depth 0.5 min.
2.5±0.2 dia.
2.5±0.3
4
6.0 dia.
6.0
4.8
1.3
6.1
Tolerance:±0.5
in mm
T Type
5
7
1.4
37.2
3.2
6
2.5
3.7
0.3
1.2
7.5
4.5
3.5
Trimmer Cap. Body
Socket
Solder
0.5±0.2 Depth 0.5 min.
2.5±0.2 dia.
Tolerance:±0.5
in mm
1.2
1.2
4
Y Type
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E6.pdf 01.9.27
35
7
Part Number Cmin.
(pF) Cmax.
(pF) TC Q Rated
Voltage Withstanding
Voltage Stator/Case Color
TZ03Z2R3p169 1.25 max. 2.3 +50/-0% NP0±200ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Black
TZ03Z050p169 1.5 max. 5.0 +50/-0% NP0±200ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue
TZ03Z070p169 2.0 max. 7.0 +50/-0% NP0±200ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue
TZ03N100p169 2.1 max. 10.0 +50/-0% N200±200ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc White
TZ03Z100p169 2.7 max. 10.0 +50/-0% NP0±200ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue
TZ03T110p169 3.0 max. 11.0 +50/-0% N450±300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc White
TZ03R200p169 4.2 max. 20.0 +50/-0% N750±300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Red
TZ03T200p169 4.2 max. 20.0 +50/-0% N450±300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Pink
TZ03R300p169 5.2 max. 30.0 +50/-0% N750±300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Green
TZ03P450p169 6.8 max. 45.0 +50/-0% N1200±500ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Yellow
TZ03P600p169 9.8 max. 60.0 +50/-0% N1200±500ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Brown
TZ03Z500p169 6.0 max. 50.0 +100/-0% NP0±300ppm/°C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Orange
TZ03R900p169 9.0 max. 90.0 +100/-0% N750±300ppm/°C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Black+Dot
TZ03R121p169 10.0 max. 120.0 +100/-0% N750±300ppm/°C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Black
Insulation Resistance : 10000M ohm min. Torque : 2.0~15.0mNm Operating Temperature Range : -25~+85°C
A blank column is filled with terminal type codes.
■ Construction
■ Mounting Holes
B Type
6.3
1.3±0.1
3 dia. 1±0.1
3 3.3
Tolerance:±0.5
in mm
E Type
1.2±0.1 dia.
1.2±0.1 dia.
5
Tolerance:±0.5
in mm
Continued on the following page.
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E6.pdf 01.9.27
36
7
Continued from the preceding page.
■ Mounting Holes
F Type
1.3±0.1 dia.
1.3±0.1 dia.
5
Tolerance:±0.5
in mm
N Type
1.3±0.1
3 dia. 1±0.1
3 3.3
Tolerance:±0.5
in mm
T Type
1.0±0.1 dia.
1.0±0.1 dia.
5.0±0.2
(in mm)
Y Type
1.4±0.1 dia.
1.4±0.1 dia.
5
Tolerance:±0.5
in mm
■ Temperature Characteristics
+6
+4
+2
20
–25
85
55
–2
–4
–6
Temp. (°C)
0
0
Cap.Change (%)
Z070 (NP0±200ppm/°C)
+6
+4
+2
20
–25
8555
–2
–4
–6
Temp. (°C)
0
0
Cap.Change (%)
T110 (N450±300ppm/°C)
+6
+4
+2
20
–25
8555
–2
–4
–6
Temp. (°C)
0
0
Cap.Change (%)
R200 (N750±300ppm/°C)
+8
+6
+4
+2
20
–25
85
55
–2
–4
–6
Temp. (°C)
0
0
–8
–10
Cap.Change (%)
P600 (N1200±500ppm/°C)
Continued on the following page.
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E6.pdf 01.9.27
37
7
Continued from the preceding page.
■ Temperature Characteristics
+8
+6
+4
+2
20
–25
85
55
–2
–4
–6
Temp. (°C)
0
0
–8
–10
Cap.Change (%)
Z500 (NP0±300ppm/°C)
+8
+6
+4
+2
20
–25
8555
–2
–4
–6
Temp. (°C)
0
0
–8
–10
Cap.Change (%)
R121 (N750±300ppm/°C)
■ Frequency Characteristics
1000
100
10
1001 200 300 400 500 600 700 800 900 1000
1000
100
10
Q
Frequency(MHz)
Capacitance(pF)
Z070
1000
100
10
1001 200 300 400 500 600 700 800 900 1000
1000
100
10
Q
Frequency (MHz)
Capacitance (pF)
T110
1000
100
10
1001 200 300 400 500
1000
100
10
Q
Frequency (MHz)
Capacitance (pF)
R200
1000
100
10
1001 200 300 400 500
1000
100
10
Q
Frequency (MHz)
Capacitance (pF)
P450
Continued on the following page.
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E6.pdf 01.9.27
38
7
Continued from the preceding page.
■ Frequency Characteristics
1000
100
10
1001 200 300 400 500
1000
100
10
Q
Frequency (MHz)
Capacitance (pF)
P600
1000
100
10
1001 200 300 400 500
1000
100
10
Q
Frequency (MHz)
Capacitance (pF)
R900
■ Temperature Profile
Flow
200
250
100
0
Preheating (in air) Gradual Cooling
(in air)
Solderring
Temperature (°C)
5 sec. max.60 sec. to 120 sec.
■ Screwdriver and Screwdriver Bit
Screwdriver for Manual Adjustment
Murata Part No. : KMDR010
Please use the following recommended screwdriver.
You can order this driver with below part number.
Though you can also adjust the capacitance value by
commercial products, please use one which has the same
head size as the below driver.
(in mm) (in mm)
Screwdriver Bit for Automatic Adjustment
Murata Part No. : KMBT010
30
2.2 dia.
Bit shape ; Minus (2.2×0.4)
50
122
20
Bit shape ; Minus (2.2×0.4)
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E6.pdf 01.9.27
39
7
■ Notice (Storage and operating condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 C. and 30 to 85%RH.
3. Do not store in or near corrosive gasses.
4. Use within 6 months of deliverly.
5. Open the package just before using.
6. Prior to storing previously opened packages, the
packaging should be heat-sealed. Avoid using rubber
bands for repackage.
7. Do not store under direct sunlight.
8. Do not use the trimmer capacitor under the
conditions listed below.
•Corrosive gasses atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxie gas, etc.)
•In liquid (Ex. water, oil, medical liquid, organic
solvent, etc.)
•Dusty / dirty atmosphere
•Direct sunlight
•Static voltage nor electric/magnetic fields
•Direct sea breeze
•Other variations of the above
■ Notice (Soldering)
1. Soldering
(1)TZ03 series can be soldered by flow soldering
method and soldering iron. Do not use reflow
soldering method.
(2)Standard soldering condition
(a)Flow soldering : Refer to the standard
temperature profile.
(b)Soldering iron :
>Temperature of tip 260+-10 C.
>Soldering time 3 sec. max.
>Diameter 3mm max.
>Wattage of iron 30W max.
Before using other soldering conditions than those
listed above, please consult with Murata factory
representative prior to using. If the soldering
conditions are not suitable, e.g., excessive time
and/or excessive temperature, the trimmer capacitor
may deviate from the specified characteristics.
(3)The dimension of mounting hole should be used
Murata's standard mounting hole at flow soldering.
The amount of solder is critical. Insufficient
amounts of solder can lead to insufficient
soldering strength on PCB. Excessive amounts of
solder may cause the bridging between the terminals
or the contact failure due to flux wicking up.
(4)When using soldering iron, the string solder shall
be applied to the lower part of the terminal only
and do not apply flux except the terminals.
Excessive amounts of solder and/or applying solder
to the upper part of the terminal may cause fixed
rotor or the contact failure due to flux invasion
into the movable part and/or the contact point.
The soldering iron should not come in contact with
the plastic case of the trimmer capacitor.
If such contact does occur, the trimmer capacitor
may be damaged.
(5)Our recommendable chlorine content of string solder
is 0.5wt% max.
(6)Do not use water-soluble flux (for water cleaning).
To prevent the deterioration of trimmer capacitor
characteristics, apply flux only to terminals.
2. Mounting
(1)Do not apply excessive force (preferable 5.0N
(Ref.; 500gf)max.), when the trimmer capacitor is
mounted on the PCB.
(2)Use the suitable PCB holes which are the same pitch
as the terminal of the trimmer capacitor. If it
would not fit with the terminal, the excessive
stress would be applied to the terminal and the
trimmer capacitor may deviate from the specified
characteristics.
(3)Do not apply bending stress more than 10.0N
(Ref.; 1kgf) after the trimmer capacitor has been
mounted on the PCB.
(4)Mount trimmer capacitor in contact with PCB.
(5)In case of bending the terminals, do not apply
excessive force to the body of the product and
prevent the terminal fixing part from damaging.
3. Cleaning [with cover film type]
(1)Isopropyl alcohol and Ethyl alcohol are available
material for cleaning. Water group material like
Pinealpha, Cleanthru can not be used. For other
materials, please consult with Murata factory
representative prior to using.
(2)The total cleaning time by dipping, vapor and
ultra-sonic method shall be less than 2 minutes.
For ultra-sonic cleaning, the available condition
is as follows.
>Cleaning time : 30 sec. max.
>Power : 20W/liter max.
>Frequency : 20 - 60kHz
>Temperature : Ambient temperature
Due to the ultra-sonic cleaning equipment peculiar
self resonance point and the cleaning compatibility
usually depends on the jig construction and/or the
cleaning condition such as the depth of immersion,
please check the cleaning equipment to determine
the suitable conditions.
If the trimmer capacitor is cleaned by other
conditions, the trimmer capacitor may deviate from
the specified characteristics.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E6.pdf 01.9.27
40
7
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot.
(1) Recommended screwdriver for manual adjustment
MURATA : KMDR010
(2) Recommended screwdriver bit
for automatic adjustment
MURATA : KMBT010
2. When adjusting with a screwdriver, do not apply
excessive force(preferable 1.0N(Ref;100gf) max.) to
minimize capacitance drift. If excessive force
applied to the screwdriver slot, it may cause
deformation of the products.
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
