DIFFERENTIAL CONNECTOR FCN-260(D) Series microGiGaCNTM RoHS Compliant by May 2005 Selected by InfiniBand as the I/O Interface Standard for the 4X and 12X FEATURES * I/O Connector designed for high speed differential signal applications. * Matched Impedance (100 ohms 10%) * Low insertion loss * Low cross talk * Adopted by InfiniBand as 4x (4 channel) and 12x (12 channel) I/O Interface * Meets Bellcor 1217 SPECIFICATIONS Item MATERIALS Specifications Operating temperature range -55 C to +105 C Current rating AC 0.5A (signal) AC 1A (ground) Voltage rating AC 30V Item Insulator LCP Resin (UL94V-0) Conductor Copper Alloy Plating Contact: Gold Plating (PAGOS) Terminal: Gold coat over Pd-Ni plating Cover: Zinc Contact resistance 80 m ohms max. (signal) (with conductor resistance) 35 m ohms max.(ground Insulation resistance 1000M ohms minimum Dielectric withstanding voltage AC 500V for 1 minute Durability 250 cycles Insertion force 30 N max. (8 pair) 60 N max. (24 pair) Withdrawl force 7 N min. (8 pair) 10.5 N min. (24 pair) Specifications subject to change Materials Dimensions are in millimeters (inches) Product Specification are subject to change, please check our website (www.fcai.fujitsu.com) for the latest specifications. www.fcai.fujitsu.com 1 microGiGaCNTM FCN- 260 (D) Series The MicroGigaCN offers a cost-effective I/O solution for high-speed applications in data and telecommunications convergence (voice, data, video and storage). It utilizes a 2.5 Gbit/sec wire speed connection with four or twelve wire link widths, offering a scalable performance range of 500Mbps to 6Gbps per link to meet the needs of entry-level and high-end enterprise systems. Forward crosstalk is less than 4% at 100 pico second pulse-rise time (four-pair switching). Fujitsu Components designed the MicroGiGaCN to specifically address the emerging requirements for a high speed differential signal I/O connector. The MicroGiGaCN offers a unique solution to LVDS, InfiniBand TA, 10G Ethernet, 4x Fiber Channel, and other high speed I/O applications. InfiniBand has selected Fujitsu's connector for the 4x and 12x I/O connector interface. The performance requirements of the connector system were tested with cable to simulate the actual requirements of an OEM System manufacturer. Our test data includes the parasitic effects of the PCB, along with measurements of a completed I/O cable assembly. Electrical Performance in out testing: * * Matched Impedance: 93.6 to 109.9 ohms @ 100 ps Trise Low Cross Talk: NEXT 3.8% @ 100pc Trise (4 pairs switching, 2 connectors and 10 meters of cable) * * * Low Insertion Loss: 2.3dB @ 2.5Gb/s (1.25GHz, 1 Meter Cable Assembly) Skew within Differential Pair: 14.4ps (2 connectors and 2 meter of cable) Skew pair to pair: 21.2ps (2 connectors and 2 meter of cable) Product Specification are subject to change, please check our website (www.fcai.fujitsu.com) for the latest specifications. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 2 microGiGaCNTM FCN- 260 (D) Series Connector Internal Struture Basic Concept for Differential Transfer Basic Concept for Differential Transfer Sectional View (Connection area) 1.5 mm 0.75 mm Patent pending Virtual ground plane + + + Outer shield 1.27 mm Differential pair contact - Ground/Power contact Fujitsu Components has designed the mechanical features of the connector to provide space saving footprint that will allow for 3 4x I/O connectors to mount onto a PCI form, or 2 12x. As RFI/EMI are critical elements in high performance cable assemblies, Fujitsu Components provides the surface mount sockets with an EMI Ground Spring on the face of the connector, to insure that the metal surface of the connector makes sufficient contact with the metal face of the card bracket. The latching mechanism of the backshell offers a lanyard system for ease of un-mating the I/O plug connector/cable assembly from the SMT I/O socket. The die cast backshell offers excellent RFI/EMI characteristics. The backshell uses a ferrule and Specifications subject to change Product Specification are subject to change, please check our website (www.fcai.fujitsu.com) for the latest specifications. unique ground spring system to provide 360 degree contact of the cable shield to the backshell, which, combined with the solid interconnect of the socket to faceplate, offers low AC coupling termination. The current version of the I/O plug comes with an attached paddlecard for wire termination. Fujitsu will offer the paddlecard in either an equalized or un-equalized version (see factory for details of the equalized version). Standard product offering will be un-equalized. As there are multiple applications for the paddlecard, with industry and customer specific wire termination, Fujitsu Components offers options to customers of providing the I/O plug connector with custom paddlecards (consult factory). Dimensions are in millimeters (inches) www.fcai.fujitsu.com 3 microGiGaCNTM FCN- 260 (D) Series CABLE I/O JACK SCREW LOCK TYPE DIMENSIONS J1 9.6 (0.378) 6.75 (0.266) J2 J3 12 (0.472) G(1) 2-M2.5 Detail X 1.2 (0.47) X S(mx2-1) Y 1.5 (0.59) Signal contact 1.5 (0.59) Ground contact S(1) Solder post 10.075 (0.397) +0.10 7.6 -0.15 (0.299 +0.004 ) -0.006 Gasket S(2) X o4 Y S(mx2) G(n) 7.39 +0.3 (0.291 +0.012 ) 0 0 5.8 (0.228) max. 6.1 (0.240) (Center of dimension 9.2 (0.362) value 1.3mm (0.51in) 1.3 (0.051) S(2) G(1) Shield cover Hexagon screw Detail Scale S(1) X 5/1 G(1) G(n) S(mx2) S(mx2-1) S(1) S(2) Unit: mm (in.) CABLE I/O JACK SCREW LOCK TYPE FCN-268D0**-G/ 0 * NO MOLD PIN DIMENSIONS Detail A J4 0.5 (0.019) 0.15 (0.006) 6 (0.236) 0.15 (0.006) Detail A G(n) Edge of P.C.B. S(mx2-1) S(mx2) Recommended P.C.B. dimensions 0 0 (0.181-0.002 ) 4.6 -0.05 5.90.05(0.2320.002) 0 6.7 -0.05 0 (0.264-0.002 ) 9 (0.354) 2-o2.20.05 (P.T.H.) (2-o0.0870.002) 2.6+0.05 0 (0.102+0.002 ) 0 8.9 (0.350) J5 J4 0.05 (0.002) 6 Detail B (0.236) 0.25+0.05 0 (0.009+0.002 ) 0 G(1) S(2) S(1) [(p-1)x0.50.05] (0.0190.002) Detail B 2.6+0.05 0 (0.102+0.002 ) 0 0.25+0.05 0 (0.009+0.002 ) 0 Unit: mm (in.) Part Number m n p J1 J2 J3 J4 J5 FCN-268D008-G/0* 1-8 1-9 1-25 29.8 (1.173) 20.15 (0.793) 17.25 (0.679) 18 (0.709) 20.9 (0.823) FCN-268D024-G/0* 1-24 1-25 1-73 53.8 (2.118) 44.15 (1.738) 41.25 (1.624) 42 (1.654) 44.9 (1.768) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 4 microGiGaCNTM FCN- 260 (D) Series CABLE I/O JACK SCREW LOCK TYPE FCN-268D0**-G/ 1 * WITH ALIGNMENT PIN FCN-268D0**-G/ 2 * WITH CRUSH PIN DIMENSIONS 1.25 (0.049) 0.5 0.15 (0.019) (0.006) 0.15 (0.006) Detail C J6 4.75 (0.187) Detail D 7.65 (0.301) 4.750.05 (0.1870.002) Unit: mm (in.) 2.6+0.05 0 (0.102+0.002 ) 0 2.6+0.05 0 2.60.05 (T.H.) (0.1020.002) Crush pin 4-0.15 (0.006) 0.3050.025 (0.0120.001) G(1) S(2) S(1) 0.3050.025 (0.0120.001) o1.82+0.05 0 (0.072+0.002 ) 0 S(mx2) S(mx2-1) 0 6.7-0.05 Edge of P.C.B. 9 (0.354) Detail E 0 (0.264 -0.002 ) 2-o2.20.05 (P.T.H.) (2-o0.087) Detail F J8 J70.05 (0.002) J60.05 (0.002) 3.9 0.05 (0.154) 0 0 4.6-0.05 (0.181 -0.002 ) 0 0 5.9-0.05 (0.232 -0.002 ) G(n) (0.102+0.002 ) 0 J7 4.1 (0.161) +0.002 (0.072 0 o1.82+0.05 0 [(p-1)x0.5+1.250.05] (0.019+0.0490.002) Detail F 1.88 (0.074) Detail C Detail D 1.075 (0.042) 2-o1.8 (0.070) ) 2-o1.8 Detail D (0.070) Detail E Part Number m n p J6 J7 J8 FCN-268D008-G/1* FCN-268D008-G/2* 1-8 1-9 1-25 14.5 (0.571) 19.25 (0.758) 22.15 (0.872) FCN-268D024-G/1* FCN-268D024-G/2* 1-24 1-25 1-73 38.1 (1.516) 43.25 (1.703) 46.15 (1.817) CABLE I/O JACK SCREW LOCK TYPE FCN-268D0**-G/ * * SOLDER POST LENGTH DIMENSIONS CABLE I/O JACK SCREW LOCK TYPE FCN-268D0**-G/ 3 * WITH DIAMOND PIN DIMENSIONS Unit: mm (in.) 4.75 (0.187) 7.65 (0.301) 4.750.05 (0.1870.002) J110.05 (0.002) J100.05 (0.002) J90.05 (0.002) 1.25 (0.049) 0.15 (0.006) 0.5 (0.019) Detail G Detail J (0.102+0.002 ) 0 S(mx2) S(mx2-1) 0.3050.025 (0.0120.001) G(1) S(2) S(1) 2.6+0.05 0 0.3050.025 (0.0120.001) Edge of P.C.B. Part Number P.C.B. thickness J12 FCN-268D0**-G/*0 1.6 (0.063) 2.325 (0.092) FCN-268D0**-G/*1 2.4 (0.094) 3.125 (0.123) FCN-268D0**-G/*2 4.0 (0.157) 4.725 (0.186) Detail H (0.072+0.002 ) 0 2-o1.82+0.05 0 Detail J Unit: mm (in.) (0.102+0.002 ) 0 G(n) 0.15 (0.006) 3.9 0.05 (0.154) 0 0 4.6-0.05 (0.181 -0.002 ) 0 0 5.9-0.05 (0.232 -0.002 ) 0 0 6.7-0.05 (0.264 -0.002 ) 9 (0.354) 2.6+0.05 0 2-o2.20.05 (P.T.H.) (2-o0.087) J9 J10 1.8 (0.70) Detail G Detail H [(p-1)x0.5+1.250.05] (0.019+0.0490.002) Part Number m n p J9 J10 J11 FCN-268D008-G/3* 1-8 1-9 1-25 14.5 (0.571) 19.25 (0.758) 22.15 (0.872) FCN-268D024-G/3* 1-24 1-25 1-73 38.1 (1.516) 43.25 (1.703) 46.15 (1.817) Specifications subject to change J12 1.5 (0.059) o1.8(0.070) (Alignment pin) Dimensions are in millimeters (inches) www.fcai.fujitsu.com 5 microGiGaCNTM FCN- 260 (D) Series CABLE I/O JACK SCREW LOCK TYPE FCN-268D0**-G/ * * PANEL CUTOUT DIMENSIONS (1) J13 0.1(0.004) J14 0.1(0.004) J15 0.1(0.004) ax . R0 3 m 2- 3.4 (0.134) 4.975 (0.196) 10 2.5 max 10.30.1 (0.4060.004) 10 Panel Panel cutout Recommended thickness of panel: 10.1mm (0.0390.004) P.C.B. 1.85 (0.073) [3.9](0.154) [5.9](0.232) Recommended panel cutout position Unit: mm (in.) Part Number m n J13 J14 J15 FCN-268D008-G/** 1-8 1-9 27 (1.063) 24 (0.945) 19.7 (0.776) FCN-268D024-G/** 1-24 1-25 51 (2.008) 48 (1.890) 43.7 (1.720) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 6 microGiGaCNTM FCN- 260 (D) Series FCN-264D - VERTICAL MOUNT SOCKETS DIMENSIONS B0.05 (B0.002) 2.60.05 (0.1020.002) 0.3050.025 (0.0120.001) 6.7 (0.264) 6.45 (0.254) 0.3 (0.012) Detail V 0 (0.039 0 1-0.1 -0.004) 14 +0.1 0 +0.004 (0.551 0 ) 0 8.8-0.1 0 (0.346-0.004 ) 3.90.1(0.1540.004) 3.20.05 (0.1260.002) Recommended P.W.B. layout FCN-264D0 * *-G/ * *, -G/ * * * (Recommended P.W.B. thickness) I/O panel Detail V (contact lead)) 2-o1.8 (2-o0.070) FCN-264D0 * *-G/ 1 *, -G/ 1 * * (Alignment pin type) 1.25 (0.049) 3.2 (0.126) FCN-264D0 * *-G/ 2 *, -G/ 2 * * (Alignment pin type) 2-1.88 (0.074) B C 1.25 (0.049) {0.5x(p-1)}0.05 (0.020x(p-1))0.005) C0.05 (C0.002) 0.3 (0.012) 0.5 (0.020) TYP Terminal pitch (o0.072+0.002 ) 0 S[2] S[1] S[2m] S[2m-1] 4.7 (0.185) S[1] G [1] o1.82+0.05 0 0.3050.025 (0.0120.001) 2-o2.20.05 (2-o0.0870.002) (P.T.H.) Connector mounting area 1 (0.039) 1.5 (0.059) TYP signal contact 1.588 (0.063) TYP ground contact 13 (0.512) Z 3.9 (0.154) 10.3 (0.406) 12 (0.472) X Z S[2m-1] 1.85+0.05 0 7.175 (0.282) 3 S[2] 1 (0.039) (0.118) G[1] 0.025 (0.001) A S [2m] G[n] (0.073+0.002 ) 0 G[n] FCN-264D0 * *-G/ * *, -G/ * * * (Mold pin type) Mold pin 2-O1.8 (0.071) 4-R0 . (0.0 15 06) O1.8 (0.071) G H (F) Unit: mm (in.) PART NUMBERS Part Number Pair m n p FCN-264D008-G/** FCN-264D008-G/*** 8 1-8 1-9 1-25 17.675 14.5 17.7 22.7 19.7 (0.696) (0.571) (0.697) (0.894) (0.776) FCN-264D024-G/** FCN-264D024-G/*** 24 1-24 1-24 1-73 41.675 38.5 41.7 46.7 43.7 (1.641) (1.516) (1.642) (1.839) (1.720) Lock Plate Thickness: Solder Post Length: Specifications subject to change Part Number A B C D E F: Panel Thickness G: Lock Plate Thickness FCN-264D008-G/** FCN-264D024-G/** 1.0 0.5: FCN-260A622 FCN-260A626 FCN-264D008-G/**1 FCN-264D024-G/**1 1.2 0.3: FCN-260A632 FCN-260A636 Part Number P.W.B. Thickness H FCN-264D0**-G/*D FCN-264D0**-G/*D1 1.6 2.325 FCN-264D0**-G/*F FCN-264D0**-G/*F1 2.4 3.125 FCN-264D0**-G/*K FCN-264D0**-G/*K1 4.0 4.725 Dimensions are in millimeters (inches) www.fcai.fujitsu.com 7 microGiGaCNTM FCN- 260 (D) Series 4X / 12X RIGHT ANGLE MOUNT SOCKETS WITH LATCHES DIMENSIONS Insulator Ground contact 7.175 (0.282) S2 G1 Detail A B D G(n) (G25) S1 C 0.3 (0.182) 6.40.1 (0.2520.004) 6.15 0.3 (0.242) (0.012) Z S1 6.1 (0.240) 9.2 (0.362) Detail E Detail B 0 o1.8-0.05 0 o0.071-0.002 Detail C D B G1 0.5 (0.020) 1.5(0.059) x (n-1) + 1.250 (0.049) Ground terminal pitch 1.5(0.059) x (m-1) + 2 (0.079) Signal terminal pitch Spring Detail B Detail C 0.15 (0.006) R0 .3 ma 1.88 (0.074) x. 3.2 (0.126) E F 7.20.1 (0.2830.004) 10.30.1 (0.4060.004) Z 4.1 (0.161) 1.5(0.059) x (n-1) -0.75(0.030 Ground contact G(n) (G25) S(mx2) (S48) S(mx2-1) (S47) 1.3 (0.051) Section Z-Z (board pin) S2 6.45 (0.254) 1.5(0.059) x (m-1) Signal contact S(mx2-1) (S47) Section Y-Y 1.075(0.042) X D 3 (0.118) B 12 (0.472) S(mx2) (S48) 1.2 (0.047) A B Detail E Panel cutout Crush Pin Option Unless otherwise specified, dimensions are in millimeters (inches) and tolerances are 0.5mm (0.020 inches). Copolarity shall be less than 0.1mm (0.004 in.) This drawing shows FCN-268D024-G/2F Unit: mm (in.) DIMENSIONS 0 S(mx2-1) (S47) Recommended P.W.B. dimensions 2.6 +0.050 5.90.05 (0.2320.002) 6.7 0 -0.05 (0.264 0 ) -0.002 S(mx2) (S48) 3.90.005 (0.1530.002) Edge of P.W.B. 0.50.05 (0.020.002) 1.5(0.059) x (n-1) + 1.250.05 (0.0490.002) Ground pitch 1.5(0.059) x (m-1) + 20.05 (0.0790.002) Signal pitch (0.102 +0.002 ) 0 o1.82 +0.05 (T.H.) (0.072 +0.002 ) 0 0.3050.025 (0.0120.001) 0.3050.025 (0.0120.001) (0.102 +0.002 ) 0 ) 2.6 0.05 (0.1020.002) (T.H.) 3.2 0.05 (0.1260.002) Detail D (0.072 +0.002 0 -0.002 1.82 +0.05 0 (T.H.) ) (0.181 0 0 4.6 -0.05 C0.05 (0.002) D0.05 (0.002) 2.6 +0.050 G (n) (G25) 2-o2.20.05 (0.0870.002) (P.T.H.) Detail D Unit: mm (in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 8 microGiGaCNTM FCN- 260 (D) Series 4X / 12X RIGHT ANGLE MOUNT SOCKETS WITH LATCHES WITH ALIGNMENT POST OR CRUSH PIN OPTION PART NUMBERS Pair P.W.B. thick ness X FCN-268D008-G/1D 8 1.6 (0.063) FCN-268D008-G/2D 8 FCN-268D008-G/1F m n 2.4 (0.094) 1-8 1-9 1.6 (0.063) 2.4 (0.094) 1-8 8 2.4 (0.094) 3.2 (0.126) FCN-268D008-G/2F 8 2.4 (0.094) FCN-268D008-G/1K 8 FCN-268D008-G/2K A E F Crush Pin B C D 24.85 (0.978) 17.675 (0.696) 17.7 (0.697) 14.5 (0.571) 22.70.1 (.894.004) 19.70.1 (.776.004) no 1-9 24.85 (0.978) 17.675 (0.696) 17.7 (0.697) 14.5 (0.571) 22.70.1 (.894.004) 19.70.1 (.776.004) yes 1-8 1-9 24.85 (0.978) 17.675 (0.696) 17.7 (0.697) 14.5 (0.571) 22.70.1 (.894.004) 19.70.1 (.776.004) no 3.2 (0.126) 1-8 1-9 24.85 (0.978) 17.675 (0.696) 17.7 (0.697) 14.5 (0.571) 22.70.1 (.894.004) 19.70.1 (.776.004) yes 4.0 (0.157) 4.8 (0.189) 1-8 1-9 24.85 (0.978) 17.675 (0.696) 17.7 (0.697) 14.5 (0.571) 22.70.1 (.894.004) 19.70.1 (.776.004) no 8 4.0 (0.157) 4.8 (0.189) 1-8 1-9 24.85 (0.978) 17.675 (0.696) 17.7 (0.697) 14.5 (0.571) 22.70.1 (.894.004) 19.70.1 (.776.004) yes FCN-268D024-G/1D 24 1.6 (0.063) 2.4 (0.094) 1-24 1-25 48.85 (1.923) 41.675 (1.641) 41.7 (1.642) 38.5 (1.516) 46.70.1 (1.839.004) 43.70.1 (1.720.004) no FCN-268D024-G/2D 24 1.6 (0.063) 2.4 (0.094) 1-24 1-25 48.85 (1.923) 41.675 (1.641) 41.7 (1.642) 38.5 (1.516) 46.70.1 (1.839.004) 43.70.1 (1.720.004) yes FCN-268D024-G/1F 24 2.4 (0.094) 3.2 (0.126) 1-24 1-25 48.85 (1.923) 41.675 (1.641) 41.7 (1.642) 38.5 (1.516) 46.70.1 (1.839.004) 43.70.1 (1.720.004) no FCN-268D024-G/2F 24 2.4 (0.094) 3.2 (0.126) 1-24 1-25 48.85 (1.923) 41.675 (1.641) 41.7 (1.642) 38.5 (1.516) 46.70.1 (1.839.004) 43.70.1 (1.720.004) yes FCN-268D024-G/1K 24 4.0 (0.157) 4.8 (0.189) 1-24 1-25 48.85 (1.923) 41.675 (1.641) 41.7 (1.642) 38.5 (1.516) 46.70.1 (1.839.004) 43.70.1 (1.720.004) no FCN-268D024-G/2K 24 4.0 (0.157) 4.8 (0.189) 1-24 1-25 48.85 (1.923) 41.675 (1.641) 41.7 (1.642) 38.5 (1.516) 46.70.1 (1.839.004) 43.70.1 (1.720.004) yes Fujitsu has developed 3 different versions of the board mount connector to meet various mounting processes: FCN-268D0xx-G/1* FCN-268D0xx-G/2* Added alignment post for robotic placement (recommended) Added crush pin feature - for manual placement (recommended) FCN-268D0xx-G/0* Original Design for optical robotic placement to the PCB Retention Clip Hand Tool Retention Clip FCN-268T-T514/H A B C Type Part No. Thickness of I/O panel FCN-260A622 1.0 (0.039) FCN-260A632 1.2 (0.047) FCN-260A626 1.0 (0.039) FCN-260A636 1.2 (0.047) 4X 12 X Specifications subject to change A B C D 6.3 (0.248) 5.8 (0.228) 0.5 (0.020) PART NUMBERS E D 23.44 (0.923) 22.45 (0.884) 20.50 (0.807) 20.45 (0.805) 47.45 (1.868) 46.45 (1.829) 44.50 (1.752) 44.45 (1.75) 0.5 (0.02) 0.3 (0.12) 0.5 (0.02) 0.3 (0.12) Dimensions are in millimeters (inches) Each connector is shipped with 1 piece of FCN-260A622 retention clip. To order connector and retention clip separately, please contact factory for part number. www.fcai.fujitsu.com 6.4 (0.252) E0.05 (0.002) 5.4 (0.213) For Assembly instructions, please see the Lock Plate Hand Tool Instruction Manual 9 microGiGaCNTM FCN- 260 (D) Series 4X / 12X RIGHT ANGLE MOUNT CONNECTOR SOCKET WITH LATCHES WITH MOUNTING EARS DIMENSIONS With positioning pin (diamond type) Balancer Gasket Insulator Ground contact C S(mx2) (S16) S2 G1 12 (0.482) 7.2 (0.283) 2M 2.5 Section X-X Section Y-Y A S1 1.5 (0.059) TYP Signal contact 1.5 (0.059) TYP Ground contact S(m2-1) (S15) E G1 0.150.01 0.0060.0004) Detail A 1.30.005 (0.0510.002) 0.150.01 (0.0060.0004) Section Z-Z (board pin) 0 O 1.8-0.05 0 (O 0.071-0.002) F S2 S1 0.05A Detail B Detail A G(n) (9) S(2xm) (S16) 1.8 (0.071) 4.1 (0.161) 6.1 (0.240) 9.2 (0.362) 1.20.005 (0.0470.002) 1.5 (0.059) G(n) (G9) S(mx2-1) (S15) 6.4 0.1 (0.2520.004) 6.15 0.3 (0.012) (0.242) 1.075 (0.042) X(2.4) [0.094] 12.525 (0.493) 9.675 (0.381) 6.92 (0.272) D B A] 3 (0.118) 0.30.05 (0.0120.002) 10.075 (0.397) Differential signal contacts 0.05A 0.5 (0.019) TYP 60 Terminal pitch 0.3 (0.012) Detail C 1.25 (0.049) Section Z-Z Detail C 3.2 (0.126) Unit: mm (in.) PART NUMBERS Partnumber Pair FCN-268D008-G/3L-R 8 FCN-268D008-G/3M-R P.W.B. thickness m n C D 1.6 2.4 (0.063) (0.094) 1-8 1-9 24.85 17.675 (0.978) (0.696) 23.025 (0.906) 20.175 (0.794) 17.7 14.5 (0.673) (0.571) 8 2.4 3.2 (0.094) (0.126) 1-8 1-9 24.85 17.675 (0.978) (0.696) 23.025 (0.906) 20.175 (0.794) 17.7 14.5 (0.673) (0.571) FCN-268D008-G/3P-R 8 4.0 4.8 (0.157) (0.189) 1-8 1-9 24.85 17.675 (0.978) (0.696) 23.025 (0.906) 20.175 (0.794) 17.7 14.5 (0.673) (0.571) FCN-268D024-G/3L-R 24 1.6 2.4 48.85 41.675 1-24 1-25 (0.063) (0.094) (1.923) (1.641) 47.025 (1.851) 44.175 (1.739) 41.7 38.5 (1.642) (1.516) FCN-268D024-G/3M-R 24 2.4 3.2 48.85 41.675 1-24 1-25 (0.094) (0.126) (1.923) (1.641) 47.025 (1.851) 44.175 (1.739) 41.7 38.5 (1.642) (1.516) FCN-268D024-G/3P-R 24 4.0 4.8 48.85 41.675 1-24 1-25 (0.157) (0.189) (1.923) (1.641) 47.025 (1.851) 44.175 (1.739) 41.7 38.5 (1.642) (1.516) Specifications subject to change X Dimensions are in millimeters (inches) A B www.fcai.fujitsu.com E F 10 microGiGaCNTM FCN- 260 (D) Series 4X / 12X RIGHT ANGLE MOUNT CONNECTOR SOCKET WITH LATCHES, WITH MOUNTING EARS RECOMMENDED FOOTPRINT DIMENSIONS J E G(n) (G9) 2- O2.20.05 (0.0880.002) 10.525 (0.414) 3.2 (0.126) K F Detail D 2- O1.82+0.05 0 (0.072+0.002 ) 0 1.575 (0.062) 0.12A (P.T.H.) Connector mounting area S(mx2) (S16) S(mx2-1) (S15) (5.55) [0.219] Nozzle vacuum area (reference) 0.3050.025 (0.0120.001) 0.3050.025 (0.0120.001) Recommended P.W.B. dimension 0.05A 0.05A H0.1 (0.894) x. ma I0.1 (0.776) G1 S2 S1 2.6++0.05 0 (0.0.102+0.002 ) 0 G0.1 (1.175) .3 R0 2-O 3 2.6++0.05 0 (0.0.102+0.002 ) 0 2.6 (0.102) A 3.90.05(0.1530.002) 5.90.05(0.2320.002) 0 6.70-0.05 (0.264-0.002 ) 9 (0.354) 4.60-0.05 0 (0.181-0.002 ) (T.H.) Edge of P.W.B. 10.3 0.1 (0.4060.004) 7.2 0.1 (0.2830.004) L 0.1A A 0.5 TYP Panel cutout t=1.00.1 (0.0390.004) 1.25 Detail D Unit: mm (in.) PART NUMBERS Partnumber Pair FCN-268D008-G/3L-R 8 FCN-268D008-G/3M-R P.W.B. thickness I J 1.6 29.85 22.7 (0.063) (1.175) (0.894) 19.7 (0.776) 25.025 (0.895) 16.075 16.65 (0.633) (0.656) 8 2.4 29.85 22.7 (0.094) (1.175) (0.894) 19.7 (0.776) 25.025 (0.895) 16.075 16.65 (0.633) (0.656) FCN-268D008-G/3P-R 8 4.0 29.85 22.7 (0.157) (1.175) (0.894) 19.7 (0.776) 25.025 (0.895) 16.075 16.65 (0.633) (0.656) FCN-268D024-G/3L-R 24 1.6 53.85 46.7 (0.063) (2.095) (1.839) 43.7 (1.720) 49.025 (1.930) 38.075 40.65 (1.499) (1.600) FCN-268D024-G/3M-R 24 2.4 53.85 46.7 (0.094) (2.095) (1.839) 43.7 (1.720) 49.025 (1.930) 38.075 40.65 (1.499) (1.600) FCN-268D024-G/3P-R 24 4.0 53.85 46.7 (0.157) (2.095) (1.839) 43.7 (1.720) 49.025 (1.930) 38.075 40.65 (1.499) (1.600) Specifications subject to change G H Dimensions are in millimeters (inches) K L www.fcai.fujitsu.com 11 microGiGaCNTM FCN- 260 (D) Series 4X / 12X SOCKETS WITH LATCHES 4X I/O CONNECTOR SOCKET DIMENSIONS 12X I/O CONNECTOR SOCKET DIMENSIONS Differential signal contacts Gasket Insulator 48.9 (1.925) 41.7 (1.642) Section X-X Lock plate 12 (0.472) S2 G1 Detail A G25 6.45 S1 (0.245) 1.5 x (m-1) (Signal contact) 1.5 x (n-1)-0.75 (0.030) (Ground contact) G9 X Y 6.45 (0.245) S1 1.5 x (m-1) (Signal contact) 1.5 x (n-1)-0.75 (0.030) (Ground contact) G9 S2 Detail A X 6.1 (0.240) 9.2 (0.362) 6.1 (0.240) 9.2 (0.362) X Detail A Spring Detail B G25 Spring Lock plate G1 S47 S15 Ground contact Section Y-Y Detail A S2 Insulator Section X-X 7.2(0.283) S48 12 (0.472) 24.9 (0.980) 17.7 (0.697) 7.2 (0.283) Y S16 X Differential signal contacts Gasket Gasket Ground contact S1 Detail B Detail B S1 G1 S2 S48 S47 Detail C Detail B G1 1.5 x (m-1) 0.03 (0.001) (Signal pitch) 1.5 x (n-1)-0.75 0.003(0.0300.001) (Ground pitch) G9 S16 S15 0.25+0.05 (0.010+0.002 ) 2.6+0.05 0 ) (0.102+0.002 0 5.20.05 (0.2050.002) 6.70-0.05 (0.26400.002 ) 15.70.05 (0.6180.002) 0.50.03 (0.0120.001) 5.90.05 (0.2320.002) 2-O2.20.05 (2-O0.0870.002) S1 S2 4.60-0.05 (0.18100.002 ) 2.6+0.05 0 (0.102+0.002 ) 0 0.25+0.05 0 (0.010+0.002 ) 0 Detail D 2.6+0.05 0 (0.102+0.002 ) 0 Section Y-Y G1 1.5 x (m-1) 0.03(0.001) (Signal pitch) 1.5 x (n-1)-0.750.03 (0.0300.001 )(Ground pitch) G1 S2 S1 Detail C 2-O2.20.05 (2-O0.0870.002) 39.70.05 (1.5630.002) G25 S48 S47 Detail D Edge of P.W.B. Recommended P.W.B. Dimension Detail D Edge of P.W.B. Detail D 0.25+0.05 (0.010+0.002 ) Recommended P.W.B. Dimension Unit: mm (in.) PART NUMBERS Part Number 5.20.05 (0.2050.002) 6.70-0.05 (0.26400.002 ) 1.5 x (m-1)-0.75 (0.030) Detail C (Ground terminal pitch) 0.50.03 (0.0120.001) 0.5 (0.393) 1.5 x (m-1) (Signal terminal pitch) 1.5 x (n-1)-0.75 (0.030) (Ground terminal pitch) 1.5 x (m-1) (Signal terminal pitch) 5.90.05 (0.2320.002) 0.5 (0.393) 4.60-0.05 (0.18100.002 ) Detail C 2.6+0.05 0 ) (0.102+0.002 0 S16 S15 Unit: mm (in.) PART NUMBER X Recommended PCB Thickness Part Number X Recommended PCB Thickness FCN-268D008-G/0D 2.4 1.6 FCN-268D024-G/0D 2.4 1.6 FCN-268D008-G/0F 3.2 2.4 FCN-268D024-G/0F 3.2 2.4 FCN-268D008-G/0K 4.8 4.0 FCN-268D024-G/0K 4.8 4.0 Fujitsu has developed 3 different versions of the board mount connector to meet various mounting processes: FCN-268D0xx-G/1* FCN-268D0xx-G/2* Added alignment post for robotic placement (recommended) Added crush pin feature - for manual placement (recommended) FCN-268D0xx-G/0* Original Design for optical robotic placement to the PCB Product Specification are subject to change, please check our website (www.fcai.fujitsu.com) for the latest specifications. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 12 microGiGaCNTM FCN- 260 (D) Series 4X / 12X PLUG CONNECTOR WITH INFINIBAND STYLE PCB DIMENSIONS Equalized (D) S4 S(mx2) (S48) Detail F (9.55) [0.376] 18.1 (0.713) Solder pad (7.05) [0.278] S4 Slot of guard for miss insertion to cover E S (mx2) (S48) S2 G(n) (G25) G1 Chip capacitor Chip resistor 3.2 (0.126) Detail F S1 {1.5 x (m-1)} S (mx2-1) (S47) Signal contact {1.5 x (n-1) -0.75} Ground contact B C S1 S3 Specifications subject to change S (mx2-1) (S47) Dimensions are in millimeters (inches) Unit: mm (in.) www.fcai.fujitsu.com 13 microGiGaCNTM FCN- 260 (D) Series 4X / 12X PLUG CONNECTOR WITH INFINIBAND STYLE PCB PART NUMBERS Non-Equalized Plug Kits Part Number Pair m n B C FCN-261R008-G/0 8 1-8 1-9 FCN-261R024-G/0 12 1-24 1-25 34.5 (1.358) 36.0 (1.417) 10.5 (0.413) 12.0 (0.472) Equalized Plug Kits Part Number Pair m n B C Equalized Pair 8 1-8 1-9 10.5 (0.413) 12.0 (0.472) 1-4 24 1-24 1-25 34.5 (1.358) 36.0 (1.417) 1-12 8 1-8 1-9 10.5 (0.413) 12.0 (0.472) 1-4 24 1-24 1-25 34.5 (1.358) 36.0 (1.417) 1-12 8 1-8 1-9 10.5 (0.413) 12.0 (0.472) 1-4 24 1-24 1-25 34.5 (1.358) 36.0 (1.417) 1-12 FCN-261R008-G/3#08 FCN-261R008-G/3#10 FCN-261R008-G/3#12 FCN-261R024-G/3#08 FCN-261R024-G/3#10 FCN-261R024-G/3#12 FCN-261R008-G/3A#08 FCN-261R008-G/3A#10 FCN-261R008-G/3#A12 FCN-261R024-G/3A#08 FCN-261R024-G/3#A10 FCN-261R024-G/3#A12 FCN-261R008-G/3B#08 FCN-261R008-G/3B#10 FCN-261R008-G/3#B12 FCN-261R024-G/3B#08 FCN-261R024-G/3#B10 FCN-261R024-G/3#B12 Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 14 microGiGaCNTM FCN- 260 (D) Series 4X / 12X PLUG CONNECTOR WITHOUT PCB RECOMMENDED PADDLE CARD OUTLINE DIMENSIONS 3.450.1 (0.1360.004) 20.1 (0.0790.004) J0.1 (37.95) [1.494] 5.50.1 Pad center (0.2170.004) 5.250.1 (0.5070.004) 30.1 (0.1200.004) 1.60.1 (0.0630.004) 1.70.1 (0.0670.039) 14.60.1 (0.5750.039) 10.1 (0.6690.039) 170.1 (0.6690.004) H0.1 (36.5) [1.437] G0.1 (38.2) [1.504] G0.5 (36) [1.417] 3.2 (0.126) 1.50.05 (0.0590.002) 0.750.05 (0.0300.002) 0.450.05 (0.0180.002) E0.5 (34.5) [1.358] 1.50.05 (0.0590.002) 0.450.05 (0.0180.002) {1.5x(m-1)} [0.059] {1.5x(n-1)-0.75} [0.059 (n-1)-0.030] B (34.5) [1.358] C(36) [1.417) Unit: mm (in.) PART NUMBERS Part Number Pair m n B C FCN-261R008-G/A 8 1-8 1-9 FCN-261R024-G/A 12 1-24 1-25 34.5 (1.358) 36.0 (1.417) 10.5 (0.413) 12.0 (0.472) RECOMMENDED DIMENSIONS FOR PCB Pair m n E F G H J Paddle card for FCN-261R008-G/A 8 1-8 1-9 10.5 12.0 14.2 12.5 13.95 (0.413) (0.742) (0.559) (0.492) (0.549) Paddle card for FCN-2624-G/A 24 1-24 1-25 34.5 36.0 38.2 36.5 37.95 (1.358) (1.417) (1.504) (1.437) (1.494) Note: the solder mask of a paddle card is recommended as following: Thickness of the solder mask: 0.15mm (0.006 in.) Aperture ratio of the solder mask: 100% Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 15 microGiGaCNTM FCN- 260 (D) Series 4X / 12X BACKSHELL KITS, WITH LATCHES CABLE I/O PLUG COVER DIMENSIONS 7.2 (0.283) (E) 8.3(0.327) D 10.3 (0.406) 8.7(0.342) 49(1.929) 71.9 (2.831) 22.9 (0.902) C B (A) Unit: mm (in.) PART NUMBERS Pairs Part Number A B C D E Applicable Cables 8 FCN-260C008-A/L0 24.9 (0.980) 17.7 (0.697) 18.1 (0.713) 14.4 (0.567) 7.2 (0.283) 9.530.4 (0.3750.016) 8 FCN-260C008-C/L0 24.9 (0.980) 17.7 (0.697) 18.1 (0.713) 14.4 (0.567) 7.2 (0.283) 8.380.4 (0.3300.016) 24 FCN-260C024-A/L0 48.9 (1.925) 41.7 (1.642) 42.1 (1.657) 21.0 (0.827) 10.5 (0.413) 15.490.51 (0.6100.20) 24 FCN-260C024-C/L0 48.9 (1.925) 41.7 (1.642) 42.1 (1.657) 21.0 (0.827) 10.5 (0.413) 13.590.51 (0.5350.20) 24 FCN-260C024-E/L0 48.9 (1.925) 41.7 (1.642) 42.1 (1.657) 21.0 (0.827) 10.5 (0.413) 11.560.51 (0.4550.20) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 16 microGiGaCNTM FCN- 260 (D) Series REFERENCE 4X CABLE MOUNT PLUG WITH BACKSHELL DIMENSIONS REFERENCE 12X CABLE MOUNT PLUG WITH BACKSHELL DIMENSIONS 18.1 (0.713) G1 S1 Color Blue Latch S48 S2 21 (0.827) Color Blue 10.3 (0.405) 8.3(0.327) 14.4 (0.567) Latch 48.9 (1.925) 41.7 (1.642) G25 S47 10.3 (0.405) 8.3(0.327) 7.2 (0.283) 10.5(0.413) 49.1 (1.933) 72.1 (2.839) 24.9 (0.980) 7.2 17.7 (0.697) (0.283) 1.5 x (n-1)-0.75 (0.030) (Ground contact) 1.5 x (m-1) (Signal contact) 23 (0.906) Color Blue 72.1 (2.839) 49.1 (1.933) Color Blue 23 (0.906) 42.1 (1.657) 1.5 x (n-1)-0.75(0.030) (Ground contact) 1.5 x (m-1) (Signal contact) Unit: mm (in.) Unit: mm (in.) PART NUMBER PART NUMBER Plug: FCN-261R008-G/0 Backshell Kit: FCN-260C008-A/L0 Plug: FCN-261R024-G/0 Backshell Kit: FCN-260C024-A/L0 Drawing reflects plug and backshell together. Backshell Kit is backshell and hardware only. Plug is not included and must be ordered separatedly. Notes: * FCN-261R0xx-G/0 is shipped with protective pastic cover over mating face of connector to protect contacts during shipping and cable assembly process. * Equalization available - please consult factory. Product Specification are subject to change, please check our website (www.fcai.fujitsu.com) for the latest specifications. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 17 microGiGaCNTM FCN- 260 (D) Series 4X LOOPBACK MODULE - 8 PAIRS FCN-261Z008 DIMENSIONS 49 (1.929) (24.9)[0.980] 7.2 (0.283) From To Pin Number Pin Number S1 S16 S2 S15 S3 S14 S4 S13 S5 S12 S6 S11 S7 S10 S8 S9 22.9 (0.902) 7.2 (0.283) 8.7 (0.346) 14.4 (0.567) 10.3 (0.406) 17.7 (0.697) Screw M2.5 S2 S16 S1 Unit: mm (in.) S15 12X LOOPBACK MODULE - 8 PAIRS FCN-261Z024 DIMENSIONS 49 (1.929) 20.9 (0.823) From To From To Pin Number Pin Number Pin Number Pin Number S1 S48 S13 S36 S2 S47 S14 S35 S3 S46 S15 S34 S4 S45 S16 S33 S5 S44 S17 S32 S6 S43 S18 S31 S7 S42 S19 S30 S8 S41 S20 S29 S9 S40 S21 S28 S10 S39 S22 S27 S11 S38 S23 S26 S12 S37 S24 S25 (48.9) [1.925] 7.2 (0.283) 9.61 (0.039) 8.3 (0.327) 10.3 (0.406) 21 (0.827) 41.7 (1.642) S2 S48 S1 S47 Specifications subject to change Unit: mm (in.) Dimensions are in millimeters (inches) www.fcai.fujitsu.com 18 microGiGaCNTM FCN- 260 (D) Series 4X / 12X BACKSHELL KIT, THUMBSCREWS DIMENSIONS 10.5 (0.413) Thumb screw Z Aligner Inner ferrule 6.7 (0.264) (key slot depth) Spring Ferrule 49 (1.929) Section Z-Z Z Screw K10.05 (0.002) (key) K20.05 (0.002) (key) 3.75 0.05 (0.1480.002)(key) 0.75 0.05 (0.0290.002)(key) 1.7 min. (key slot width) C4 10.3 (0.406) 7.7 min (key slot) Key (append) 2.25 0.05 (0.0890.002)(key) K30.05 (0.002)(key) K40.05 (0.002)(key) 6.75 (0.266) 9.65 (0.380) 2-M2.5 C3 C2 C1 Unit: mm (in.) PART NUMBERS Part Number Pair No. C1 C2 C3 C4 K1 K2 K3 K4 FCN-260C008-A/S3 8 29.8 20.15 17.25 14.4 9.75 6.75 5.25 8.25 (1.173) (0.793) (0.679) (0.567) (0.384) (0.266) (0.207) (0.325) FCN-260C024-A/S3 24 53.8 44.15 41.25 21.0 33.75 30.75 29.25 32.25 (2.118) (1.738) (1.624) (0.827) (1.329) (1.211) (1.152) (1.270) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 19 microGiGaCNTM FCN- 260 (D) Series ASSEMBLY TOOLS FCN-237T-T109/H Ferrule Crimp Dies Hand Press Ferrule Crimp Dies Part Number For Cover Part Number FCN-261T-T002/H FCN-260C008-A/L0 FCN-261T-T104/H FCN-260C024-A/L0 FCN-261T-T105/H FCN-260C024-C/L0 Note that additional tooling will be added to cover smaller wire bundle O.D.s. Please check with factory. Both the press and ferrule crimp tool are required for the ferrule crimp process. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 20 microGiGaCNTM FCN- 260 (D) Series INSTRUCTIONS FOR CABLE ASSEMBLY 1. Set the crimping dies onto the hand press After a set is completed 2. A ferrule and a spring are put on the cable. b. The shield braid is turnd back and cut the length of 13mm (0.512 in.) 13mm (0.512 in.) a. Strip the cable insulator and put the spring, which shall be moved at the position where it does not interfere with assembly process. Spring c. A ferrule is put on the position of 2mm from the end of the jacket d. Strip the shield pair of wires (27mm [1.063in.] from the ring edge) and then wire insulation (27.5mm [1.082 in.]). 27 .5m m 27 mm (1.08 2) (1. 06 3) Specifications subject to change 2mm (0.079 in.) e. A shield of pair wires passed through the aligner, and solder the wires onto the paddle card. Dimensions are in millimeters (inches) www.fcai.fujitsu.com 21 microGiGaCNTM FCN- 260 (D) Series 3. Ferrule crimping: To explain the process clearly, the following photos do not have a paddle card. a. Set the cable onto right side of the jig, and end of the jig, ferrule edges are made to become parallel, and surface of provisional crimp and the connector made to parallel, pre-crimp the ferrule until part A, D hit parts B, E. (The ferrule becomes an eclipse). parallel X(mm)[in.] Cable X (mm) [in.] Pair AWG 8 24 10.5 [0.413] 24 24 15.60 [0.614] Connector b. Confirm that lever is tightened hardly. If it isn't, a lever shall be pulled to the front and tightened. c. Set the cable at the table cavity at the left side. (The ferrule edge/end face shall be parallel to the jig). If a ring is not able to be inserted into the hollow, loosen with the lever, and insert the ferrule again. Then tighten with the lever. d. Crimp ferrule until parts A, D hit parts B, E. Specifications subject to change e. Hand press is returned to the original position, and loosened with the lever pulling forward. Dimensions are in millimeters (inches) f. Crimp completion. www.fcai.fujitsu.com 22 microGiGaCNTM FCN- 260 (D) Series Y (m Check Y dimension: m ] in )[ Cable Y (mm) [in.] Pair AWG 8 24 10.8 [0.425] 24 24 16.00 [0.630] 4. Turn back the jacket and cut in the ferrule edge. cut in the ferrule edge 5. Installation of cover: g. Set the cable and soldered with the paddle card into the outer cover. (#1 pin position side of the connector shall be on top) and put another cover, and set the spring, which is initially put on the cable, at the edge of the ferrule and install it inside and then fix the covers with the screws. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 23 microGiGaCNTM FCN- 260 (D) Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: www.fujitsu.com/us/services/edevices/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fujitsu.com/sg/services/micro/components/ (c) 2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America, Inc. or its affiliates do not warrant that the content of the datasheet is error free. In a continuing effort to improve our porducts, Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. February 21, 2007. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 24