9
High-Speed (3.125Gbps) Stacking Connectors
FX8C Series
■Mechanical features
●0.6mm Pitch
●Stacking Height : 5~16mm
● Number of Contacts :
60, 80, 100, 120, 140,
160, 200, 240, 280
●SMT Coplanarity
The coplanarity of the SMT solder area lead is
maintained at the high accuracy of less than 0.1mm.
●Mating Guide
The very small and guide rib is provided, and secures
±0.6mm self-alignment, considering the mating
operativity into accounts. ( fig.1 )
●Effective Mating Length : 2mm ( fig.1 )
●Mis-insertion Prevention
The boss prevents mis-insertion in the board to cause
due to the boss position and boss diameter.
●Two-piece Connection Product
In order to enhance the mating reliability for fine pitch
connector using two-pieces, the two-pieces of
connectors are combined by our unique method, and
can secure the mount position accuracy. In such a
new concept, the two-piece connected product is
prepared at every number of contacts ( The standard
mating pitch for the two-piece interconnected product
in two rows is 11mm. )
■Signal integrity features
fig.1
H:Stacking Height
0.6
2
Effective Mating Length
0.6
H+0.3
-0.2
Receptacle
Header
FX8C-**S-SV
FX8C-** / **S11-SVJ
FX8C-**S-SV5
FX8C-** / **S11-SV5J
FX8C-**P-SV
FX8C-** / **P11-SVJ
FX8C-**P-SV1
FX8C-** / **P11-SV1J
FX8C-**P-SV2
FX8C-**/**P11-SV2J
FX8C-**P-SV4
FX8C-** / **P11-SV4J
FX8C-**P-SV6
FX8C-** / **P11-SV6J
5mm
6mm
7mm
9mm
11mm
10mm
11mm
12mm
14mm
16mm
5〜16
■Stac king height variations (5mm~16mm)
●Insertion-Loss-to-Crosstalk-Ratio ( ICR )
The insertion-loss-to-crosstalk ratio (ICR) with
five-aggressor differential FEXT meets the IEEE
802.3ap specification for 3.125+Gbps with plenty
of margins.
●Differential Impedance
The differential impedance is within 100±10 ohms
at 100 ps rise time (20% to 80%).
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
10
FX8C Series●High-Speed (3.125Gbps) Stacking Connectors
*The standard packaging of the two-piece connection product is the tray packaging.
■Product Specifications
Rating Current rating 0.4A
Operating Temperature Range
-55ç to +85çNote 1.
Storage Temperature Range
-10ç to +60çNote 2.
Voltage rating
100V AC
Operating Humidity Range
-40% to 80%
Storage Humidity Range
40% to 70%
Item Specification Condition
1. Insulation Resistance 100M ohms min. 250V DC
2. Withstanding voltage No flashover or insulation breakdown. 300V AC/1 minute
3. Contact Resistance 80m ohms max. 100mA
4. Vibration No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.
Humidity (Steady state)
Contact resistance: 100m ohms max.Insulation resistance: 100M ohms min.
96 hours at temperature of 40 ± 2ç and humidity of 90% to 95%
6. Temperature Cycle
Contact resistance: 100m ohms max.Insulation resistance: 100M ohms min.
(-55ç: 30 minutes, 15 to 35ç: 2 to 3 minutes
(-85ç: 30 minutes, 15 to 35ç: 2 to 3minutes) 5 cycles
7.
Durability (Mating/un-mating)
Contact resistance: 100m ohms max. 50 cycles
8.
Resistance to Soldering heat
No deformation of components affecting performance.
Reflow: At the recommended temperature profile
Manual soldering: 360ç for 5 seconds
FX8C Series
■Ordering Information FX8C - 120 P - SV 1 (91)
qetwry
qSeries Name : FX8C
wNumber of Contacts :60, 80, 100, 120, 140
eConnector type P :Header
S :Receptacle
rContact type SV :Board vertical type
t
Product height variationBlank : Standard (Minimum low profile)
1: +1mm . . . . . . 6:+6mm
yPackaging Type
(71) : Tray packaging
(91) : Tube packaging
(92) : Embossed tape package
●Single Product
Note 1 : Includes temperature rise caused by current flow.
Note 2 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3 : Slight variations in color of the plastic compounds do not affect form ,fit or function of the connector.
Note 4 : FX8C-*P-SV(*),FX8C-*S-SV(*) is gold plated.
Note 5 : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
■Material
Part Material Finish Remarks
Insulator PPS Light brown UL94V-0
Header Contact Phosphor bronze Contact area Gold plated –––––––
Lead area
Tin plated(Note 4)
Receptacle Contact Phosphor bronze Contact area Gold plated –––––––
Lead area
Tin plated(Note 4)
FX8C - 120/120 P 11 - SV 1 J
qe
y u
wr
t
qSeries Name :FX8C
wNumber of Contacts: 60∞2, 80∞2, 100∞2,
120∞2, 140∞2
Example: 120/120 = 240 contacts
eConnector Type : P : Header
S : Receptacle
rConnector to Connector Pitch
tContact type SV : Board vertical type
y
Product Height Variation
Blank : Standard (Minimum lot profile)
1:+1mm . . . . . . 6:+6mm
uJ: two-piece connection product
●
two-piece Connection Product
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
11
FX8C Series●High-Speed (3.125Gbps) Stacking Connectors
5mm 16mm
5mm 16mm
■Signal integrity
GSGSG
signal ground
GSSG
To match 100 ohm differential impedance and to reduce crosstalk, a staggered GSGSG pin assignment is recommended for
FX8C of 5mm to 9mm height, and a staggered GSSG pin assignment is recommended for 10mm to 16mm height. (G=ground
and S=signal)
●Pin assignment
The differential impedance is 100 ± 10 ohm for FX8C of 5mm and 16mm height at 100 ps rise time (20% to 80%).
●Impedance
The propagation delay is 69 and 118 ps for FX8C of 5mm and 16mm height, respectively.
●Propagation delay
The differential insertion loss crosses 1 dB at 7 and 5 GHz for FX8C of 5mm and 16mm height, respectively.
●Insertion loss
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
12
FX8C Series●High-Speed (3.125Gbps) Stacking Connectors
The differential return loss meets the IEEE 802.3ap specification to 10 and 7 GHz for FX8C of 5mm and 16mm height,
respectively.
●Return loss
5mm 16mm
5mm 16mm
The staggered GSGSG and GSSG pin assignments resulted in low differential NEXT.
●Near-end crosstalk (NEXT)
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
13
FX8C Series●High-Speed (3.125Gbps) Stacking Connectors
The insertion-loss-to-crosstalk ratio (ICR) with multi-aggressor* differential FEXT meets the extrapolated IEEE 802.3ap
specification to 7+ GHz with plenty of margins.
●Insertion-loss-to-crosstalk ratio (ICR)
5mm 16mm
5mm 16mm
The staggered GSGSG and GSSG pin assignments resulted in low differential FEXT.
●Far-end crosstalk (FEXT)
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
14
FX8C Series●High-Speed (3.125Gbps) Stacking Connectors
(Ø0.6)
(Ø0.9) E±0.1
(0.75) (0.4)
4.45±0.3
5.1±0.3
P=0.6±0.1
A±0.3
D±0.2
(1.5)
(2.4) (2.4)
Polaritymark
B＋0.05
−0.2
C＋0.05
−0.2
(C1)
t0.2±0.03∞w0.25±0.03
6.5＋0
−0.3
P=0.6±0.1
(Ø0.9) (Ø0.6)
E±0.1 (1.5)
5.1±0.3
(0.4)(0.75)
(2.4) (2.4)
D±0.2
A±0.3
B＋0.05
−0.2
C＋0.05
−0.2
F±0.3
Polaritymark
(C1)
t0.2±0.03∞w0.25±0.03
6.5＋0
−0.3
■Header (Single Product)
[FX8C-**P-SV]
[FX8C-**P-SV1]
[FX8C-**P-SV2]
[FX8C-**P-SV4]
[FX8C-**P-SV6]
**71: Tray packaging product 91: Tube packaging product 92: Embossed tape packaging product
Note 1:
To order the tube packaging product, please determine the quantity for delivery, multiplying the tube packaging product by an integer.
Note 2: The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel
unit. Please refer to the delivery form item on page 12 for details.
Note 3: Tray packaging product is not for board placement with automatic equipment.
** 71: Tray packaging product 91: Tube packaging product 92: Embossed tape packaging product
Note 1:
To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer.
Note 2: The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be sold per reel unit.
Please refer to the packaging specification item on page 12 for details.
Note 3: The locator material is installed between leads for the FX8C-P-SV6 type.
Note 4: Tray packaging product is not for board placement with automatic equipment.
Note 5: (93) spec is with vacuum pick-up tape, embossed tape packaging product.
Note 5
Unit:mm
CL No.Part Number
578-0501-9-92
578-0503-4-92
578-0505-0-92
578-0506-2-92
578-0507-5-92
FX8C-060P-SV(92)
FX8C-080P-SV(92)
FX8C-100P-SV(92)
FX8C-120P-SV(92)
FX8C-140P-SV(92)
Number of Contacts
60
80
100
120
140
A B
24.60
30.60
36.60
42.60
48.60
23.00
29.00
35.00
41.00
47.00
C D E RoHS
Tube packaging Quantity (Pieces)
17.40
23.40
29.40
35.40
41.40
22.20
28.20
34.20
40.20
46.20
YES
21
17
14
12
10
20.70
26.70
32.70
38.70
44.70
Part Number CL No. Unit: mm
FX8C-060P-SV1
(92)
FX8C-060P-SV2
(92)
FX8C-060P-SV4
(92)
FX8C-060P-SV6
(92)
FX8C-080P-SV1
(92)
FX8C-080P-SV2
(92)
FX8C-080P-SV4
(92)
FX8C-080P-SV6
(92)
FX8C-100P-SV1
(92)
FX8C-100P-SV2
(92)
FX8C-100P-SV4
(92)
FX8C-100P-SV6
(92)
FX8C-120P-SV1
(92)
FX8C-120P-SV2
(92)
FX8C-120P-SV4
(92)
FX8C-120P-SV6
(92)
FX8C-140P-SV1
(92)
FX8C-140P-SV2
(92)
FX8C-140P-SV4
(92)
FX8C-140P-SV6
(93)
578-0521-6-
92
578-0541-3-
92
578-0581-8-
92
578-0601-3-
92
578-0523-1-
92
578-0543-9-
92
578-0583-3-
92
578-0603-9-
92
578-0525-7-
92
578-0545-4-
92
578-0585-9-
92
578-0605-4-
92
578-0526-0-
92
578-0546-7-
92
578-0586-1-
92
578-0606-7-
92
578-0527-2-
92
578-0547-0-
92
578-0587-4-
92
578-0607-0-
93
60
80
100
120
140
24.60
30.60
36.60
42.60
48.60
23.00
29.00
35.00
41.00
47.00
20.70
26.70
32.70
38.70
44.70
22.20
28.20
34.20
40.20
46.20
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
YES
21
17
14
12
10
Number of Contacts
A B C D E F RoHS
Tube packaging Quantity (Pieces)
17.40
23.40
29.40
35.40
41.40
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
15
FX8C Series●High-Speed (3.125Gbps) Stacking Connectors
(2.4)(2.4)
(Ø0.6)
(Ø0.9)
P=0.6±0.1
5.6±0.3
3.95±0.25
(0.75)
(1.8)
7＋0
−0.3
E±0.1
t0.2±0.03∞w0.25±0.03
Polaritymark(Rearside)
D±0.2
A±0.3
B＋0.2
−0
C＋0.2
−0
(C1)
(2.4)(2.4)
(Ø0.6)(Ø0.9)
P=0.6±0.1
5.6±0.3
8.95±0.25
(0.75)
(1.8)
7＋0
−0.3
E±0.1
t0.2±0.03∞w0.25±0.03
Polaritymark(Rearside)
D±0.2
A±0.3
B＋0.2
−0
C＋0.2
−0
(C1)
[FX8C-**S-SV5]
■PCB mounting pattern
■Receptacle (Single Product)
[FX8C-**S-SV]
** 71: Tray packaging product 91: Tube packaging product 92: Embossed tape packaging product
Note 1:
To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer.
Note 2: The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel
unit. Please refer to the packaging specification item on page 12 for details.
Note 3: Tray packaging product is not for board placement with automatic equipment.
** 71: Tray packaging product 91: Tube packaging product 92: Embossed tape packaging product
Note 1:
To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer.
Note 2: The embossed tape package product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel unit.
Please refer to the packaging specification item on page 12 for details.
Note 3: Tray packaging product is not for board placement with automatic equipment.
Unit:mm
CL No.Part Number
578-0801-2-92
578-0803-8-92
578-0805-3-92
578-0806-6-92
578-0807-9-92
FX8C-060S-SV(92)
FX8C-080S-SV(92)
FX8C-100S-SV(92)
FX8C-120S-SV(92)
FX8C-140S-SV(92)
Number of Contacts
60
80
100
120
140
A B
24.60
30.60
36.60
42.60
48.60
23.05
29.05
35.05
41.05
47.05
C D E RoHS
Tube packaging Quantity (Pieces)
17.40
23.40
29.40
35.40
41.40
22.20
28.20
34.20
40.20
46.20
YES
21
17
14
12
10
20.80
26.80
32.80
38.80
44.80
Unit:mm
CL No.Part Number
578-0821-0-92
578-0823-5-92
578-0825-0-92
578-0826-3-92
578-0827-6-92
FX8C-060S-SV5(
92
)
FX8C-080S-SV5(
92
)
FX8C-100S-SV5(
92
)
FX8C-120S-SV5(
92
)
FX8C-140S-SV5(
92
)
Number of Contacts
60
80
100
120
140
A B
24.60
30.60
36.60
42.60
48.60
23.05
29.05
35.05
41.05
47.05
C D E RoHS
Tube packaging Quantity (Pieces)
17.40
23.40
29.40
35.40
41.40
22.20
28.20
34.20
40.20
46.20
YES
21
17
14
12
10
20.80
26.80
32.80
38.80
44.80
Ø0.7±0.05
0.6±0.03 0.35±0.03
2.4±0.03 D±0.05 2.4±0.03
4±0.05
7.4MIN
1.8±0.05
E±0.05
Polarity mark position
Ø1.1±0.05
Ø1.1±0.05
Ø0.7±0.05
0.6±0.05 0.35±0.03
D±0.05
2.4±0.03
E±0.05
2±0.05
6.9MIN
1.5±0.05
2.4±0.03
Polarity mark position
Header
[FX8C**P-SV*]Receptacle
[FX8C-**S-SV,SV5*]
·Recommended metal mask thickness : t=0.15mm
·Recommended metal mask thickness : t=0.15mm
·If the inside (the connector lower side) of the SMT land isn't treated
with insulation tape and so on,
the area is considered as the prohibited area.(FX8C-S-SV5 isn't applied.)
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
16
FX8C Series●High-Speed (3.125Gbps) Stacking Connectors
22.20
28.20
34.20
40.20
46.20
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
(16.1)
(11)
(3.35)
(4.5)
F±0.1
Polarity mark
E±0.2
B±0.3
A±0.3
C+0.05
_0.2
D+0.05
_0.2
(4.5)
F±0.1
(G)
(16.1)
(11)
Polarity mark
C+0.05
_0.2
D+0.05
_0.2
A±0.3
E±0.2
B±0.3
[FX8C-**/**P11-SV1J]
[FX8C-**/**P11-SV2J]
[FX8C-**/**P11-SV4J]
[FX8C-**/**P11-SV6J]
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
Note 3: The locator material is installed between leads for the FX8C-**/**P11-SV6J type.
Unit:mm
CL No.Part Number
578-0651-1-71
578-0653-7-71
578-0655-2-71
578-0656-5-71
578-0657-8-71
FX8C-060/060P11-SVJ(71)
FX8C-080/080P11-SVJ(71)
FX8C-100/100P11-SVJ(71)
FX8C-120/120P11-SVJ(71)
FX8C-140/140P11-SVJ(71)
Number of Contacts
60∞2
80∞2
100∞2
120∞2
140∞2
A B
31.70
37.70
43.70
49.70
55.70
24.70
30.70
36.70
42.70
48.70
C D E F RoHS
20.70
26.70
32.70
38.70
44.70
17.40
23.40
29.40
35.40
41.40
22.20
28.20
34.20
40.20
46.20
YES
23.00
29.00
35.00
41.00
47.00
Part Number CL No. Unit: mm
FX8C-
0
60/
0
60P11-SV1J(71)
FX8C-
0
60/
0
60P11-SV2J(71)
FX8C-
0
60/
0
60P11-SV4J(71)
FX8C-
0
60/
0
60P11-SV6J(71)
FX8C-
0
80/
0
80P11-SV1J(71)
FX8C-
0
80/
0
80P11-SV2J(71)
FX8C-
0
80/
0
80P11-SV4J(71)
FX8C-
0
80/
0
80P11-SV6J(71)
FX8C-100/100P11-SV1J(71)
FX8C-100/100P11-SV2J(71)
FX8C-100/100P11-SV4J(71)
FX8C-100/100P11-SV6J(71)
FX8C-120/120P11-SV1J(71)
FX8C-120/120P11-SV2J(71)
FX8C-120/120P11-SV4J(71)
FX8C-120/120P11-SV6J(71)
FX8C-140/140P11-SV1J(71)
FX8C-140/140P11-SV2J(71)
FX8C-140/140P11-SV4J(71)
FX8C-140/140P11-SV6J(71)
578-0671-9-71
578-0691-6-71
578-0731-9-71
578-0751-6-71
578-0673-4-71
578-0693-1-71
578-0733-4-71
578-0753-1-71
578-0675-0-71
578-0695-7-71
578-0735-0-71
578-0755-7-71
578-0676-2-71
578-0696-0-71
578-0736-2-71
578-0756-0-71
578-0677-5-71
578-0697-2-71
578-0737-5-71
578-0757-2-71
60∞2
80∞2
100∞2
120∞2
140∞2
31.70
37.70
43.70
49.70
55.70
.
24.70
30.70
36.70
42.70
48.70
23.00
29.00
35.00
41.00
47.00
17.40
23.40
29.40
35.40
41.40
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
YES
Number of Contacts
A B C D E F G H RoHS
20.70
26.70
32.70
38.70
44.70
■
Header (two-piece Connection Product)
[FX8C-**/**P11-SVJ]
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
17
FX8C Series●High-Speed (3.125Gbps) Stacking Connectors
A B C D E F RoHS
FX8C-060/060S11-SVJ(71)
FX8C-080/080S11-SVJ(71)
FX8C-100/100S11-SVJ(71)
FX8C-120/120S11-SVJ(71)
FX8C-140/140S11-SVJ(71)
578-0901-7-71
578-0903-2-71
578-0905-8-71
578-0906-0-71
578-0907-3-71
60∞2
80∞2
100∞2
120∞2
140∞2
31.70
37.70
43.70
49.70
55.70
24.60
30.60
36.60
42.60
48.60
23.05
29.05
35.05
41.05
47.05
20.80
26.80
32.80
38.80
44.80
17.40
23.40
29.40
35.40
41.40
22.20
28.20
34.20
40.20
46.20
YES
F±0.1 (4)
(11)
(16.6)
(3.4)
E±0.2
B±0.3
A±0.3
C＋0.2
−0
D＋0.2
−0
Polaritymark(Rearside)
F±0.1 (4)
(11)
(16.6)
(8.4)
E±0.2
B±0.3
A±0.3
D＋0.2
−0
C＋0.2
−0
Polaritymark(Rear side)
[FX8C-**/**S11-SV5J]
■PCB mounting pattern
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
Unit:mm
Unit:mm
Part Number CL No.
Number of Contacts
Part Number CL No.
Number of Contacts
A B C D E F RoHS
FX8C-060/060S11-SV5J(71)
FX8C-080/080S11-SV5J(71)
FX8C-100/100S11-SV5J(71)
FX8C-120/120S11-SV5J(71)
FX8C-140/140S11-SV5J(71)
578-0921-4-71
578-0923-0-71
578-0925-5-71
578-0926-8-71
578-0927-0-71
60∞2
80∞2
100∞2
120∞2
140∞2
31.70
37.70
43.70
49.70
55.70
24.60
30.60
36.60
42.60
48.60
23.05
29.05
35.05
41.05
47.05
20.80
26.80
32.80
38.80
44.80
17.40
23.40
29.40
35.40
41.40
22.20
28.20
34.20
40.20
46.20
YES
■Receptacle (two-piece Connection Product)
[FX8C-**/**S11-SVJ]
·Recommended metal mask thickness : t=0.15mm
Header
[FX8C-** / **P 11-SVJ, SV1J]Receptacle
[FX8C-** / **P 11-SVJ, SV5J]
·Recommended metal mask thickness : t=0.15mm
·If the inside (the connector lower side) of the SMT land isn't treated
with insulation tape and so on,
the area is considered as the prohibited area.(Except FX8C-**/**S11-SV5J)
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
18
FX8C Series●High-Speed (3.125Gbps) Stacking Connectors
■Detailed Figure After Joint Removal
(Single Product in two-piece Connection Product)
[FX8C-** / **P 11-SVJ]
(1.5)
(2.4)
(2.4)
(Ø0.6)
(Ø0.9)
(0.75) (0.4)
4.45±0.25
5.1±0.3
P=0.6±0.1
Polaritymark
6.5 ＋0
−0.3
t0.2±0.03∞w0.25±0.03
[FX8C-** / **P 11-SV1J]
(0.75) (0.4)
H±0.25
5.1±0.3
(1.5)
(2.4)
(2.4)
(Ø0.6)
(Ø0.9)
P=0.6±0.1
t0.2±0.03∞w0.25±0.03
Polaritymark
6.5＋0
−0.3
Header
5.6±0.3
(0.75)
3.95±0.25
(2.4)
(2.4)
(1.8)
(Ø0.9) (Ø0.6)
P=0.6±0.1
t0.2±0.03∞w0.25±0.03
7＋0
−0.3
Polaritymark(Rearside)
[FX8C-** / **S 11-SV5J]
(0.75) 8.95±0.25
5.6±0.3
(2.4)(2.4)
(1.8)
(Ø0.9) (Ø0.6)
P=0.6±0.1
t0.2±0.03∞w0.25±0.03
Polaritymark(Rearside)
7＋0
−0.3
Receptacle
[FX8C-** / **S 11-SVJ]
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
19
FX8C Series●High-Speed (3.125Gbps) Stacking Connectors
■Connector Precautions
6. Cautions
This product is made as the thin formed product in order to be miniaturized.
1. Tolerance Clearance on Mating Side
The effective contact length of the product is set to 2.0mm. Please use the product
so as to set to less than 1.2mm the clearance between the header and the receptacle in the mating process.
2. Fixation Between Mounting Boards
If this product is fixed only by mating force, Please consider the fixing method so as not to apply loads such as vibration, shock and so
on.
3. Stacking General Tolerance in Mating
Note: Please Note that the above tolerance of the stacking height doesn't include the solder paste thickness.
4. Handling Two-piece Connection Product
Both joint bar edges of the two-piece connection product are fixed by joints, while the mating process can't be performed in that state.
Before the mating process, please remove the joint bars as if pull it up. (Don't remove the joint bars before mounting on the board. )
Before removing joint bar After removing joint bar
Stack Amm A mm
+0.3
–0.2
5. Mounting Temperature Profile (Reference)
MAX 60s90±120s
Soldering Time
(220ç min.)
Pre-heating time
(150 to 200ç)
Time (Second)
(ç)
Temperature
150ç
200ç
220ç
140
180
220
0
160
200
(MAX 250ç)
240
260
HRS test conditions
Test boardGlass epoxy 161mm∞100mm∞1.6mm thick
Solder method :Reflow
Solder composition :Paste,
96.5%Sn/3%Ag/0.5%Cu
Metal mask : 0.15mm thick
Reflow cycles : 2 cycles
The temperature profile is based on the above
conditions.
In individual applications the actual temperature may
vary, depending on solder paste type,
volume/thickness and board size/thickness. Consult
your solder paste and equipment manufacturer for
specific recommendations.
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
20
FX8C Series●High-Speed (3.125Gbps) Stacking Connectors
■Packaging Type
■
Packaging Specification
[Tube packaging]
●Header
[FX8-**P-SV (91)]
[FX8-**P-SV1 (91)]
[FX8-**P-SV2 (91)]
[FX8-**P-SV4 (91)]
[FX8-**P-SV6 (91)]
●Receptacle
[FX8C-**S-SV (91)]
[FX8C-**S-SV5 (91)]
MADE IN JAPAN
FX8C-S-SV
(10)
550±2 (A)
Polarity mark
Polarity mark(Rear side)
MADE IN JAPAN
FX8C-P-SV
550±2
(9.5)
(A)
Polarity mark
Packaging Type
Tube packaging Packaged Product Pieces
Sales Unit
Total Tube Length
Tape Width
Product Pitch
Emboss Reel Diameter
Packaged Product Pieces
Sales Unit
21 pieces
12mm
Refer to the table on page 13 in this catalog.
Refer to the table on page 13 in this catalog.
Per reel
44mm 56mm 72mm
17 pieces 14 pieces 12-pieces 10pieces
Embossed Tape Packaging
Number of Contacts 60 contacts 80 contacts 100 contacts 120 contacts 140 contacts
*The above packaging type is , as listed for the single product only.
In addition, the packaging type of the two-piece connection product is the tray packaging.
Deliver the multiplied pieces. (Example) In case of 60 contacts,21 pieces, 42-pieces,...
550mm±2mm
P/S
Header
FX8C-**P-SV0 (91)
FX8C-**P-SV1 (91)
FX8C-**P-SV2 (91)
FX8C-**P-SV4 (91)
FX8C-**P-SV6 (91)
FX8C-**S-SV0 (91)
FX8C-**S-SV5 (91)
9
10
11
13
15
7.4
12.4
Receptacle
Part Number A
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
21
FX8C Series●High-Speed (3.125Gbps) Stacking Connectors
[Embossed Tape Package]
●Carrier Size Pattern
0.4 or 0.5
C
D
4
2
12
A
B
1.5
1.7
20.2 [26.2] [34.2] 1.75
40.4 [52.4] [68.4]
44 [56] [72]
UNREELING DIRECTION
P/S Part Number B C D E Product Pieces
Unit: mm
** : Number of Contacts
* The above figure represents the case
of the receptacle connector.
Header
Receptacle
FX8C-**P-SV0 (92)
FX8C-**P-SV1 (92)
FX8C-**P-SV2 (92)
FX8C-**P-SV4 (92)
FX8C-**P-SV6 (92)
FX8C-**S-SV0 (92)
FX8C-**S-SV5 (92)
A
5.5
5.5
5.5
5.5
5.5
6.0
6.0
7.9
7.9
7.9
7.9
7.9
8.4
8.4
5.2
6.2
7.2
9.2
11.2
4.3
9.3
1.2
1.2
1.2
1.2
1.2
1.2
1.2
Ø370
Ø370
Ø330
Ø370
Ø370
Ø330
Ø370
1000 pieces
1000 pieces
0500 pieces
0500 pieces
0500 pieces
1000 pieces
0500 pieces
Note 2
Note 1
Note 2
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
22
FX8C Series●High-Speed (3.125Gbps) Stacking Connectors
10 EMPTY COMPONENT COMPARTMENTS MIN
10 EMPTY COMPONENT COMPARTMENTS MIN
EMBOSSED CARRIER TAPE
2 44.4[56.4][72.4]
TRAILER EQUIPPED
(1000 CONNECTORS)
LEADER(400mm MIN)
TOP COVER TAPE
Ø80(Note.1)
E
Ø13
●Reel State Size Pattern (FREE)
Note 1:
E dimension for FX8C-140S-SV(92) is Ø370, core dia. is Ø100.
Note 2:
E dimension for FX8C-120P-SV2(92), FX8C-120S-SV5(92), FX8C-140S-SV5(92) is Ø380.
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
A166
0.6mm Pitch Stacking Height 3mm to 16mm Connector
FX8, FX8C Series
■Features
1. Stacking Height 3mm to 16mm available
The board to board stacking height can correspond to
3mm~16mm.
2. SMT Coplanarity
The coplanarity of the SMT solder area lead is maintained at
the high accuracy of less than 0.1mm.
3. Mating Guide
The very small and guide rib is provided, and secures ±0.6mm
self-alignment, considering the mating operativity into accounts.
4. Mis-insertion Prevention
The boss prevents mis-insertion in the board to cause due to
the boss position and boss diameter.
■Applications
Note pc, business equipments, which require miniaturization or light-weight
FX8 Series
Note that FX8 series and FX8C series are not mated with each other.
FX8C Series
●Stacking Height 5 to 16mm-FX8C Series
●Stacking Height 3,4mm-FX8 Series
3,4mm
5 to 16mm
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
A174
FX8, FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connector
*The standard packaging of the two-piece connection product is the tray packaging.
■Product Specifications
Rating Current rating 0.4A
Operating Temperature Range
-55ç to +85çNote 1.
Storage Temperature Range
-10ç to +60çNote 2.
Voltage rating
100V AC
Operating Humidity Range
-40% to 80%
Storage Humidity Range
40% to 70%
Item Specification Condition
1. Insulation Resistance 100M ohms min. 250V DC
2. Withstanding voltage No flashover or insulation breakdown. 300V AC/1 minute
3. Contact Resistance 80m ohms max. 100mA
4. Vibration No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.
Humidity (Steady state)
Contact resistance: 100m ohms max.Insulation resistance: 100M ohms min.
96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle
Contact resistance: 100m ohms max.Insulation resistance: 100M ohms min.
(-55ç: 30 minutes, 15 to 35ç: 2 to 3 minutes
(-85ç: 30 minutes, 15 to 35ç: 2 to 3minutes) 5 cycles
7.
Durability (Mating/un-mating)
Contact resistance: 100m ohms max. 50 cycles
8.
Resistance to Soldering heat
No deformation of components affecting performance.
Reflow: At the recommended temperature profile
Manual soldering: 360ç for 5 seconds
FX8C Series
■Ordering Information FX8C - 120 P - SV 1 (91)
qetwry
qSeries Name : FX8C
wNumber of Contacts :60, 80, 90, 120, 140
eConnector type P :Header
S :Receptacle
rContact type SV :Board vertical type
t
Product height variationBlank : Standard (Minimum low profile)
1: +1mm . . . . . . 3:+3mm
yPackaging Type
(71) : Tray packaging
(91) : Tube packaging
(92) : Embossed tape package
●Single Product
Note 1 : Includes temperature rise caused by current flow.
Note 2 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3 : Slight variations in color of the plastic compounds do not affect form ,fit or function of the connector.
Note 4 : FX8C-*P-SV(*),FX8C-*S-SV(*) is gold plated.
Note 5 : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
■Material
Part Material Finish Remarks
Insulator PBS Light brown UL94V-0
Header Contact Phosphor bronze Contact area Gold plated –––––––
Lead area
Tin plated(Note 4)
Receptacle Contact Phosphor bronze Contact area Gold plated –––––––
Lead area
Tin plated(Note 4)
FX8C - 120/120 P 11 - SV 1 J
qe
y u
wr
t
qSeries Name :FX8C
wNumber of Contacts: 60∞2, 80∞2, 90∞2,
100∞2, 120∞2, 140∞2
Example: 120/120 = 240 contacts
eConnector Type : P : Header
S : Receptacle
rConnector to Connector Pitch
tContact type SV : Board vertical type
y
Product Height Variation
Blank : Standard (Minimum lot profile)
1:+1mm . . . . . . 3:+3mm
uJ: two-piece connection product
●
two-piece Connection Product
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
A175
FX8, FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connector
Receptacle
Header FX8C-**S-SV
FX8C-**/**S11-SVJ FX8C-**S-SV5
FX8C-**/**S11-SV5J
FX8C-**P-SV
FX8C-**/**P11-SVJ
FX8C-**P-SV1
FX8C-**/**P11-SV1J
FX8C-**P-SV2
FX8C-**/**P11-SV2J
FX8C-**P-SV4
FX8C-**/**P11-SV4J
FX8C-**P-SV6
FX8C-**/**P11-SV6J
5mm
6mm
7mm
9mm
11mm
10mm
11mm
12mm
14mm
16mm
BStacking Height Variation
5 to 16
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
A176
FX8, FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connector
■Header (Single Product)
[FX8C-**P-SV]
[FX8C-**P-SV1]
[FX8C-**P-SV2]
[FX8C-**P-SV4]
[FX8C-**P-SV6]
**71: Tray packaging product 91: Tube packaging product
92 : Embossed tape packaging product
Note
1: To order the tube packaging product, please determine the
quantity for delivery, multiplying the tube packaging product
by an integer.
Note 2: The embossed tape packaging product is prepared for 60
and 80 contacts only. In addition, the product will be
procured per reel unit. Please refer to the delivery form item
on page A182 for details.
Note 3: Tray packaging product is not for board placement with
automatic equipment.
** 71: Tray packaging product 91: Tube packaging product 92: Embossed tape packaging product
Note 1:
To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer.
Note 2: The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be sold per reel unit.
Please refer to the packaging specification item on page A182 for details.
Note 3: The locator material is installed between leads for the FX8C-P-SV6 type.
Note 4: Tray packaging product is not for board placement with automatic equipment.
Note 5: (93) spec is with vacuum pick-up tape, embossed tape packaging product.
Note 5
Unit:mm
CL No.Part Number
578-0501-9-92
578-0503-4-92
578-0505-0-92
578-0506-2-92
578-0507-5-92
FX8C-060P-SV(92)
FX8C-080P-SV(92)
FX8C-100P-SV(92)
FX8C-120P-SV(92)
FX8C-140P-SV(92)
Number of Contacts
60
80
100
120
140
A B
24.60
30.60
36.60
42.60
48.60
23.00
29.00
35.00
41.00
47.00
C D E RoHS
Tube packaging Quantity (Pieces)
17.40
23.40
29.40
35.40
41.40
22.20
28.20
34.20
40.20
46.20
YES
21
17
14
12
10
20.70
26.70
32.70
38.70
44.70
Part Number CL No. Unit: mm
FX8C-060P-SV1
(92)
FX8C-060P-SV2
(92)
FX8C-060P-SV4
(92)
FX8C-060P-SV6
(92)
FX8C-080P-SV1
(92)
FX8C-080P-SV2
(92)
FX8C-080P-SV4
(92)
FX8C-080P-SV6
(92)
FX8C-100P-SV1
(92)
FX8C-100P-SV2
(92)
FX8C-100P-SV4
(92)
FX8C-100P-SV6
(92)
FX8C-120P-SV1
(92)
FX8C-120P-SV2
(92)
FX8C-120P-SV4
(92)
FX8C-120P-SV6
(92)
FX8C-140P-SV1
(92)
FX8C-140P-SV2
(92)
FX8C-140P-SV4
(92)
FX8C-140P-SV6
(93)
578-0521-6-
92
578-0541-3-
92
578-0581-8-
92
578-0601-3-
92
578-0523-1-
92
578-0543-9-
92
578-0583-3-
92
578-0603-9-
92
578-0525-7-
92
578-0545-4-
92
578-0585-9-
92
578-0605-4-
92
578-0526-0-
92
578-0546-7-
92
578-0586-1-
92
578-0606-7-
92
578-0527-2-
92
578-0547-0-
92
578-0587-4-
92
578-0607-0-
93
60
80
100
120
140
24.60
30.60
36.60
42.60
48.60
23.00
29.00
35.00
41.00
47.00
20.70
26.70
32.70
38.70
44.70
22.20
28.20
34.20
40.20
46.20
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
YES
21
17
14
12
10
Number of Contacts
A B C D E F RoHS
Tube packaging Quantity (Pieces)
17.40
23.40
29.40
35.40
41.40
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
A177
FX8, FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connector
[FX8C-**S-SV5]
BPCB mounting pattern
■Receptacle (Single Product)
[FX8C-**S-SV]
** 71: Tray packaging product 91: Tube packaging product 92: Embossed tape packaging product
Note 1:
To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer.
Note 2: The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel
unit. Please refer to the packaging specification item on page A182 for details.
Note 3: Tray packaging product is not for board placement with automatic equipment.
** 71: Tray packaging product 91: Tube packaging product 92: Embossed tape packaging product
Note 1:
To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer.
Note 2: The embossed tape package product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel unit.
Please refer to the packaging specification item on page A182 for details.
Note 3: Tray packaging product is not for board placement with automatic equipment.
Unit:mm
CL No.Part Number
578-0801-2-92
578-0803-8-92
578-0805-3-92
578-0806-6-92
578-0807-9-92
FX8C-060S-SV(92)
FX8C-080S-SV(92)
FX8C-100S-SV(92)
FX8C-120S-SV(92)
FX8C-140S-SV(92)
Number of Contacts
60
80
100
120
140
A B
24.60
30.60
36.60
42.60
48.60
23.05
29.05
35.05
41.05
47.05
C D E RoHS
Tube packaging Quantity (Pieces)
17.40
23.40
29.40
35.40
41.40
22.20
28.20
34.20
40.20
46.20
YES
21
17
14
12
10
20.80
26.80
32.80
38.80
44.80
Unit:mm
CL No.Part Number
578-0821-0-92
578-0823-5-92
578-0825-0-92
578-0826-3-92
578-0827-6-92
FX8C-060S-SV5(
92
)
FX8C-080S-SV5(
92
)
FX8C-100S-SV5(
92
)
FX8C-120S-SV5(
92
)
FX8C-140S-SV5(
92
)
Number of Contacts
60
80
100
120
140
A B
24.60
30.60
36.60
42.60
48.60
23.05
29.05
35.05
41.05
47.05
C D E RoHS
Tube packaging Quantity (Pieces)
17.40
23.40
29.40
35.40
41.40
22.20
28.20
34.20
40.20
46.20
YES
21
17
14
12
10
20.80
26.80
32.80
38.80
44.80
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
A178
FX8, FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connector
22.20
28.20
34.20
40.20
46.20
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
[FX8C-**/**P11-SV1J]
[FX8C-**/**P11-SV2J]
[FX8C-**/**P11-SV4J]
[FX8C-**/**P11-SV6J]
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
Note 3: The locator material is installed between leads for the FX8C-**/**P11-SV6J type.
Unit:mm
CL No.Part Number
578-0651-1-71
578-0653-7-71
578-0655-2-71
578-0656-5-71
578-0657-8-71
FX8C-060/060P11-SVJ(71)
FX8C-080/080P11-SVJ(71)
FX8C-100/100P11-SVJ(71)
FX8C-120/120P11-SVJ(71)
FX8C-140/140P11-SVJ(71)
Number of Contacts
60∞2
80∞2
100∞2
120∞2
140∞2
A B
31.70
37.70
43.70
49.70
55.70
24.70
30.70
36.70
42.70
48.70
C D E F RoHS
20.70
26.70
32.70
38.70
44.70
17.40
23.40
29.40
35.40
41.40
22.20
28.20
34.20
40.20
46.20
YES
23.00
29.00
35.00
41.00
47.00
Part Number CL No. Unit: mm
FX8C-
0
60/
0
60P11-SV1J(71)
FX8C-
0
60/
0
60P11-SV2J(71)
FX8C-
0
60/
0
60P11-SV4J(71)
FX8C-
0
60/
0
60P11-SV6J(71)
FX8C-
0
80/
0
80P11-SV1J(71)
FX8C-
0
80/
0
80P11-SV2J(71)
FX8C-
0
80/
0
80P11-SV4J(71)
FX8C-
0
80/
0
80P11-SV6J(71)
FX8C-100/100P11-SV1J(71)
FX8C-100/100P11-SV2J(71)
FX8C-100/100P11-SV4J(71)
FX8C-100/100P11-SV6J(71)
FX8C-120/120P11-SV1J(71)
FX8C-120/120P11-SV2J(71)
FX8C-120/120P11-SV4J(71)
FX8C-120/120P11-SV6J(71)
FX8C-140/140P11-SV1J(71)
FX8C-140/140P11-SV2J(71)
FX8C-140/140P11-SV4J(71)
FX8C-140/140P11-SV6J(71)
578-0671-9-71
578-0691-6-71
578-0731-9-71
578-0751-6-71
578-0673-4-71
578-0693-1-71
578-0733-4-71
578-0753-1-71
578-0675-0-71
578-0695-7-71
578-0735-0-71
578-0755-7-71
578-0676-2-71
578-0696-0-71
578-0736-2-71
578-0756-0-71
578-0677-5-71
578-0697-2-71
578-0737-5-71
578-0757-2-71
60∞2
80∞2
100∞2
120∞2
140∞2
31.70
37.70
43.70
49.70
55.70
.
24.70
30.70
36.70
42.70
48.70
23.00
29.00
35.00
41.00
47.00
17.40
23.40
29.40
35.40
41.40
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
YES
Number of Contacts
A B C D E F G H RoHS
20.70
26.70
32.70
38.70
44.70
■
Header (two-pieces Connection Product)
[FX8C-**/**P11-SVJ]
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
A179
FX8, FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connector
A B C D E F RoHS
FX8C-060/060S11-SVJ(71)
FX8C-080/080S11-SVJ(71)
FX8C-100/100S11-SVJ(71)
FX8C-120/120S11-SVJ(71)
FX8C-140/140S11-SVJ(71)
578-0901-7-71
578-0903-2-71
578-0905-8-71
578-0906-0-71
578-0907-3-71
60∞2
80∞2
100∞2
120∞2
140∞2
31.70
37.70
43.70
49.70
55.70
24.60
30.60
36.60
42.60
48.60
23.05
29.05
35.05
41.05
47.05
20.80
26.80
32.80
38.80
44.80
17.40
23.40
29.40
35.40
41.40
22.20
28.20
34.20
40.20
46.20
YES
[FX8C-**/**S11-SV5J]
BPCB mounting pattern
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
Unit:mm
Unit:mm
Part Number CL No.
Number of Contacts
Part Number CL No.
Number of Contacts
A B C D E F RoHS
FX8C-060/060S11-SV5J(71)
FX8C-080/080S11-SV5J(71)
FX8C-100/100S11-SV5J(71)
FX8C-120/120S11-SV5J(71)
FX8C-140/140S11-SV5J(71)
578-0921-4-71
578-0923-0-71
578-0925-5-71
578-0926-8-71
578-0927-0-71
60∞2
80∞2
100∞2
120∞2
140∞2
31.70
37.70
43.70
49.70
55.70
24.60
30.60
36.60
42.60
48.60
23.05
29.05
35.05
41.05
47.05
20.80
26.80
32.80
38.80
44.80
17.40
23.40
29.40
35.40
41.40
22.20
28.20
34.20
40.20
46.20
YES
■Receptacle (two-piece Connection Product)
[FX8C-**/**S11-SVJ]
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
A180
FX8, FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connector
BDetailed Figure After Joint Removal
(Single Product in two-piece Connection Product)
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
A181
FX8, FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connector
BConnector Precautions
6. Cautions
This product is made as the thin formed product in order to be miniaturized.
1. Tolerance Clearance on Mating Side
The effective contact length of the product is set to 2.0mm. Please use the product
so as to set to less than 12mm the clearance between the header and the receptacle in the mating process.
2. Fixation Between Mounting Boards
If this product is fixed only by mating force, Please consider the fixing method so as not to apply loads such as vibration, shock and so
on.
3. Stacking General Tolerance in Mating
Note: Please Note that the above tolerance of the stacking height doesn't include the solder paste thickness.
4. Handling Two-piece Connection Product
Both joint bar edges of the two-piece connection product are fixed by joints, while the mating process can't be performed in that state.
Before the mating process, please remove the joint bars as if pull it up. (Don't remove the joint bars before mounting on the board. )
Before removing joint bar After removing joint bar
Stack Amm A mm
+0.3
–0.2
5. Mounting Temperature Profile (Reference)
MAX 60s90±120s
Soldering Time
(220ç min.)
Pre-heating time
(150 to 200ç)
Time (Second)
(ç)
Temperature
150ç
200ç
220ç
140
180
220
0
160
200
(MAX 250ç)
240
260
HRS test conditions
Test boardGlass epoxy 161mm∞100mm∞1.6mm thick
Solder method :Reflow
Solder composition :Paste,
96.5%Sn/3%Ag/0.5%Cu
Metal mask : 0.15mm thick
Reflow cycles : 2 cycles
The temperature profile is based on the above
conditions.
In individual applications the actual temperature may
vary, depending on solder paste type,
volume/thickness and board size/thickness. Consult
your solder paste and equipment manufacturer for
specific recommendations.
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
A182
FX8, FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connector
BPackaging Type
B
Packaging Specification
[Tube packaging]
●Header
[FX8-**P-SV (91)]
[FX8-**P-SV1 (91)]
[FX8-**P-SV2 (91)]
[FX8-**P-SV4 (91)]
[FX8-**P-SV6 (91)]
●Receptacle
[FX8C-**S-SV (91)]
[FX8C-**S-SV5 (91)]
Packaging Type
Tube packaging Packaged Product Pieces
Sales Unit
Total Tube Length
Tape Width
Product Pitch
Emboss Reel Diameter
Packaged Product Pieces
Sales Unit
21 pieces
12mm
Refer to the table on page A183 in this catalog.
Refer to the table on page A183 in this catalog.
Per reel
44mm 56mm 72mm
17 pieces 14 pieces 12-pieces 10pieces
Embossed Tape Packaging
Number of Contacts 60 contacts 80 contacts 100 contacts 120 contacts 140 contacts
*The above packaging type is , as listed for the single product only.
In addition, the packaging type of the two-piece connection product is the tray packaging.
Deliver the multiplied pieces. (Example) In case of 20 contacts,21 pieces, 4two-pieces,...
550mm±2mm
P/S
Header
FX8C-**P-SV0 (91)
FX8C-**P-SV1 (91)
FX8C-**P-SV2 (91)
FX8C-**P-SV4 (91)
FX8C-**P-SV6 (91)
FX8C-**S-SV0 (91)
FX8C-**S-SV5 (91)
9
10
11
13
15
7.4
12.4
Receptacle
Part Number A
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
A183
FX8, FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connector
[Embossed Tape Package]
●Carrier Size Pattern
P/S Part Number B C D E Product Pieces
Unit: mm
** : Number of Contacts
Header
Receptacle
FX8C-**P-SV0 (92)
FX8C-**P-SV1 (92)
FX8C-**P-SV2 (92)
FX8C-**P-SV4 (92)
FX8C-**P-SV6 (92)
FX8C-**S-SV0 (92)
FX8C-**S-SV5 (92)
A
5.5
5.5
5.5
5.5
5.5
6.0
6.0
7.9
7.9
7.9
7.9
7.9
8.4
8.4
5.2
6.2
7.2
9.2
11.2
4.3
9.3
1.2
1.2
1.2
1.2
1.2
1.2
1.2
Ø370
Ø370
Ø330
Ø370
Ø370
Ø330
Ø370
1000 pieces
1000 pieces
0500 pieces
0500 pieces
0500 pieces
1000 pieces
0500 pieces
Note 2
Note 1
Note 2
●Reel State Size Pattern (FREE)
Note 1:
E dimension for FX8C-140S-SV(92) is Ø370, core dia. is Ø100.
Note 2:
E dimension for FX8C-120P-SV2(92), FX8C-120S-SV5(92), FX8C-140S-SV5(92) is Ø380.
(Note 1)
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.