VWO 35 IRMS = 3x 35 A VRRM = 800-1200 V AC Controller Modules Preliminary data VRSM VRRM VDSM VDRM V V 900 1300 800 1200 H Type VWO 35-08ho7 VWO 35-12ho7 A I J B C L M E F N G Symbol Conditions IRMS TC = 85C, (per phase) 35 A ITAVM TC = 85C; (180 sine ; per thyristor) 16 A ITSM TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 200 210 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 180 190 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 200 150 A2s A2 s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 160 150 A2s A2 s I2t (di/dt)cr (dv/dt)cr Maximum Ratings TVJ = TVJM repetitive, IT = 20 A f = 50 Hz, tP = 200 s VD = 2/3 VDRM IG = 0.15 A non repetitive, IT = ITAVM diG/dt = 0.15 A/s TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) VRGM PGM TVJ = TVJM IT = ITAVM tp = 30 s tp = 300 s PGAVM TVJ TVJM Tstg VISOL 50/60 Hz, RMS IISOL 1 mA t = 1 min t=1s Md Mounting torque (M4) Weight typ. 100 A/s Features * Thyristor controller for AC (circuit W3C acc. to IEC) for mains frequency * Soldering connections for PCB mounting * Isolation voltage 3000 V~ * Planar passivated chips Applications * Switching and control of three phase AC circuits * Softstart AC motor controller * Solid state switches * Light and temperature control Advantages 500 A/s 500 V/s 10 V 5 2.5 0.5 W W W -40...+125 125 -40...+125 C C C 2500 3000 V~ V~ * Easy to mount with two screws * Space and weight savings * Improved temperature and power cycling G 1.5 - 2 Nm 18 g IXYS reserves the right to change limits, test conditions and dimensions. (c) 2006 IXYS All rights reserved 0610 Data according to IEC 60747 refer to a single thyristor/diode unless otherwise stated. 1-2 VWO 35 Symbol Conditions Characteristic Values ID, IR TVJ = TVJM; VR = VRRM; VD = VDRM < 5 mA VT IT < 1.6 V VT0 rT For power-loss calculations only VGT VD = 6 V IGT VD = 6 V VGD IGD = 20 A; TVJ = 25C < < < < 1.5 2.5 25 50 V V mA mA TVJ = TVJM; VD = 2/3 VDRM < < 0.2 3 V mA IL TVJ = 25C; tP = 10 s IG = 0.1 A; diG/dt = 0.1 A/s < 75 mA IH TVJ = 25C; VD = 6 V; RGK = < 50 mA tgd TVJ = 25C; VD = 1/2 VDRM IG = 0.1 A; diG/dt = 0.1 A/s < 2 s RthJC per thyristor; DC per module per thyristor; DC per module 1.3 0.22 1.8 0.3 K/W K/W K/W K/W Creeping distance on surface Creepage distance in air Max. allowable acceleration 11.2 mm 5.0 mm 50 m/s2 RthJK dS dA a TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C 0.85 V 27 m Dimensions in mm (1 mm = 0.0394") IXYS reserves the right to change limits, test conditions and dimensions. (c) 2006 IXYS All rights reserved 0610 G 2-2