ALUMINUM ELECTROLYTIC CAPACITORS PT Miniature Sized, High Ripple Current, Long Life series High ripple current. Suited for ballast application. Compliant to the RoHS directive (2011/65/EU). CA PT Long Life Smaller PZ Specifications Item Performance Characteristics Category Temperature Range -25 to +105C Rated Voltage Range 200 to 450V Rated Capacitance Range 15 to 820F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.06CV+10 (A) Measurement frequency : 120Hz at 20C Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 200 0.12 220 0.12 250 0.12 400 0.15 420 0.20 450 0.20 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z- 25C / Z+20C 200 220 250 400 420 450 3 3 3 8 8 8 Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied for 5000 hours at 105C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan Leakage current Type numbering system (Example : 250V 220F) Radial Lead Type 1 Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 U P T 2 E 2 2 1 M HD T d Size code Capacitance tolerance (20%) D+ P0.5 MAX. Configuration Rated capacitance (220F) Rated voltage (250V) Series name Pressure relief vent L+ 15 MIN MAX. Type 4 MIN Configuration D (mm) D 10 12.5 16 18 20 22 25 P 5.0 5.0 7.5 7.5 10.0 10.0 12.5 d 0.6 0.6 0.8 0.8 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5 1.0 1.0 Pb-free leadwire Pb-free PET sleeve 10 PD 12.5 to 18 20 to 25 HD RD In case L > 25 for the 12.5 dia. unit, lead dia. d = 0.8mm. (D < 20): 1.5 (D 20): 2.0 * Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS PT series Dimensions V Cap Code 200 220 250 400 420 450 2D 2P 2E 2G W6 2W 15 150 18 180 22 220 0.21 27 270 12.5 x 25 0.24 33 330 12.5 x 31.5 39 390 12.5 x 31.5 47 470 56 560 68 680 82 100 120 150 180 220 270 820 101 121 151 181 221 271 10 x 31.5 10 x 31.5 0.22 12.5 x 31.5 0.25 0.29 12.5 x 31.5 0.27 12.5 x 35.5 0.28 0.32 12.5 x 35.5 0.31 12.5 x 40 0.32 12.5 x 40 0.37 12.5 x 40 0.42 10 x 31.5 12.5 x 25 0.35 0.41 12.5 x 31.5 0.48 12.5 x 31.5 0.53 12.5 x 35.5 0.62 12.5 x 40 12.5 x 25 0.34 12.5 x 31.5 0.36 12.5 x 31.5 12.5 x 31.5 12.5 x 35.5 12.5 x 40 0.43 0.49 0.58 16 x 31.5 0.70 0.39 0.67 12.5 x 31.5 12.5 x 35.5 12.5 x 40 16 x 31.5 0.40 0.46 0.53 0.62 16 x 35.5 0.72 18 x 31.5 0.72 16 x 31.5 0.76 16 x 35.5 0.77 16 x 40 0.83 18 x 31.5 0.81 18 x 31.5 0.77 18 x 35.5 0.83 16 x 35.5 0.88 16 x 40 0.88 18 x 40 0.95 18 x 31.5 0.87 18 x 35.5 0.88 18 x 35.5 1.01 18 x 40 1.01 18 x 40 1.13 22 x 40 1.15 470 471 22 x 40 1.20 561 821 12.5 x 31.5 0.24 12.5 x 35.5 391 820 0.20 12.5 x 31.5 0.31 331 681 12.5 x 25 0.27 390 680 0.18 12.5 x 25 330 560 12.5 x 25 0.29 10 x 31.5 10 x 31.5 22 x 50 1.50 25 x 40 1.50 25 x 50 1.60 22 x 50 1.50 25 x 40 1.50 25 x 50 1.60 22 x 40 1.05 22 x 50 1.45 25 x 40 1.45 25 x 50 1.55 16 x 31.5 16 x 31.5 0.46 0.50 16 x 35.5 0.58 18 x 31.5 0.58 16 x 40 0.66 18 x 35.5 0.67 18 x 40 0.77 22 x 40 0.15 0.17 10 x 31.5 0.85 22 x 50 1.30 25 x 40 1.30 25 x 50 1.40 0.36 16 x 31.5 0.38 16 x 31.5 0.43 16 x 35.5 0.44 16 x 35.5 0.51 16 x 40 0.49 18 x 31.5 0.51 18 x 31.5 0.48 16 x 40 0.57 18 x 31.5 0.57 18 x 35.5 0.55 18 x 35.5 0.61 18 x 40 0.65 18 x 40 0.66 22 x 40 0.77 22 x 40 0.80 22 x 50 0.92 25 x 40 0.92 25 x 50 1.10 22 x 50 0.95 25 x 40 0.95 25 x 50 1.20 Case size D x L(mm) : Rated ripple current (Arms) at 105C 120Hz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Coefficient 0.80 1.00 1.25 1.40 1.60 CAT.8100D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Nichicon: UPT2D331MHD UPT2D391MHD UPT2D471MRD UPT2D680MPD UPT2D681MRD UPT2D681MRD6 UPT2E560MHD UPT2E561MRD UPT2E680MHD UPT2E820MHD UPT2G101MHD UPT2G680MHD UPT2G820MHD UPT2P101MHD UPT2P121MHD UPT2P151MHD UPT2W150MPD UPT2W151MRD UPT2W151MRD6 UPT2W180MHD UPT2W181MRD UPT2D181MHD UPT2D221MHD UPT2D221MHD6 UPT2D271MHD UPT2D271MHD6 UPT2E271MHD UPT2E331MRD UPT2E470MPD UPT2E471MRD UPT2E471MRD6 UPT2G330MHD UPT2G331MRD UPT2G390MHD UPT2G470MHD UPT2G560MHD UPT2D101MHD UPT2D121MHD UPT2D151MHD UPT2E151MHD UPT2E181MHD UPT2E181MHD6 UPT2E221MHD UPT2E221MHD6 UPT2G181MRD UPT2G220MPD UPT2G270MHD UPT2G271MRD UPT2G271MRD6 UPT2P331MHD UPT2P391MRD UPT2P560MPD UPT2P561MRD UPT2P561MRD6 UPT2D820MHD UPT2D821MRD UPT2E101MHD UPT2E121MHD UPT2G101MHD6 UPT2G121MHD UPT2G121MHD6 UPT2G151MHD UPT2P181MHD UPT2P221MHD UPT2P221MHD6 UPT2P271MHD UPT2P271MHD6 UPT2W220MHD UPT2W270MHD UPT2W330MHD UPT2W390MHD UPT2W470MHD UPTW6220MHD UPTW6270MHD UPTW6271MRD UPTW6330MHD UPT2P680MHD UPT2P681MRD UPT2P820MHD UPT2W101MHD UPT2W121MRD UPTW6101MHD UPTW6121MHD UPTW6151MRD UPTW6180MPD UPTW6181MRD UPTW6181MRD6 UPT2W560MHD UPT2W680MHD UPT2W680MHD6 UPT2W820MHD UPTW6820MHD UPTW6820MHD6 UPTW6390MHD UPTW6470MHD UPTW6560MHD UPTW6680MHD UPTW6680MHD6 UPTW6220MHD1TO UPT2G270MHD1TO