LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Inverter-use screw terminal, 85C
CAT. No. E1001D
@High ripple capability
@For train systems and high power consumed inverter circuits
@Endurance with ripple current : 85C 20000 hours
?SPECIFICATIONS
(at 20C, 120Hz)
(at 20C after 5 minutes)
(at 20C, 120Hz)
(at 120Hz)
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
Insulation Resistance
Insulation
Withstanding Voltage
Endurance
Shelf Life
Items
-
25 to +85C
350 to 450Vdc
P20% (M)
I=0.02CV or 5mA, whichever is smaller.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
0.25 max.
Capacitance change C(
-
25C)/C(+20C)]0.7
When measured between the terminals shorted each other and the mounting clamp on the insulating sleeve covering the case by using
an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100MO.
When a voltage of 2000Vac is applied for 1 minute between the terminals shorted each other and the mounting clamp on the insulating
sleeve covering the case, there shall not be electrical damage.
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied 20000 hours at 85C.
Capacitance change [P30% of the initial value
D.F. (tanE)[300% of the initial specified value
Leakage current [The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 500 hours at 85C
without voltage applied.
Capacitance change [P20% of the initial value
D.F. (tanE)[300% of the initial specified value
Leakage current [The initial specified value
Characteristics
?PART NUMBERING SYSTEM
RWL 400 LGSN 10000 M C F19
Case code
Type of mounting clamp, if required
Capacitance tolerance (P20%)
Nominal capacitance in MF
Screw terminal type
Rated voltage in volts
Series name
F63.5 : G=6
F76 & F89 : G=5
?DIMENSIONS (Terminal Type=LGSN) [mm]
@B T ype of Mounting Clamp
* The screw and the mounting clamp are separately supplied and not attached to the product.
L+4max. GP1
Sleeve
FD+1.8max.
FP1
6
AP1
WP1
4.5
BP1
30°P5°
360°
3
45°P5°
8
J
KP1
EP1
4.5
@C Type of Mounting Clamp
fD
63.5
76
A
90
104.5
B
76
90
W
80
93.5
F
28.0
31.5
fD
63.5
76
89
E
38.1
44.5
50.8
K
43.5
50.0
56.5
F
28.0
31.5
31.5
J
14.0
14.0
16.0
<Screw specifications>
Plus hexagon-headed screw:
M5B0.8B10
Maximum screw tightening torque:
3.23Nm
longer life
RWL
RWF
(1/2)
ALUMINUM ELECTROLYTIC CAPACITORS
SMQ-Series(Snap-in)
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Inverter-use screw terminal, 85C
CAT. No. E1001D
mF
SV
Vdc 350
400 400
450 450
500
63.5 76 89 63.5 76 89 63.5 76 89
2,200
2,700
3,300
3,900
4,700
5,600
6,800
8,200
10,000
12,000
63.5B115
11.1
63.5B130
12.8
63.5B155
15.2
63.5B170
17.3
63.5B190
20.0
76B115
14.7
76B130
16.9
76B155
20.2
76B170
23.1
89B155
26.6
89B190
32.0
63.5B115
10.1
63.5B130
11.7
63.5B155
13.8
63.5B170
15.8
63.5B190
18.2
76B115
14.7
76B130
15.5
76B155
18.3
76B170
21.0
89B155
24.1
89B190
29.1
63.5B115
9.1
63.5B130
10.6
63.5B155
12.7
63.5B170
14.4
76B115
11.2
76B130
13.0
76B155
16.7
76B190
20.1
89B170
23.0
89B155
19.9
89B190
26.4
fD
Upper : Case size FDBL (mm)
Lower : Rated ripple current (Arms) at 85C, 120Hz
?STANDARD RATINGS
?RATED RIPPLE CURRENT MULTIPLIERS
@Frequency Multipliers
Frequency (Hz)
Coefficient
50
0.8 120
1.0 300
1.1 1k
1.3 3k
1.4
fD (mm) L (mm)
63.5
76
89
115
D11
E11
-
155
D15
E15
F15
190
D19
E19
F19
130
D13
E13
-
170
D17
E17
F17
?CASE CODE
Note : The endurance of capacitors is shorted with internal heating produced by ripple currents at the rate of halving the lifetime with every 5 to
10C rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for RWL series capacitors,
using them at operating voltage less than their rated voltage can extend their lifetime. For the details, please contact a representative of
Nippon Chemi-Con.
(2/2)
ALUMINUM ELECTROLYTIC CAPACITORS
SMQ-Series(Snap-in)