Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Long life snap-ins, 105℃
LHSSeries
・The lower temperature range of the category temperature range has been expended.
・For solar power generation
・Endurance with ripple current : 5,000 hours at 105℃
・Rated voltage range : 450 to 500V
・For inverter control, switching power supplies
・Non solvent resistant type
・RoHS2 Compliant
◆SPECIFICATIONS
Items Characteristics
Category
Temperature Range -40 to +105℃
Rated Voltage Range
450 to 500Vdc
Capacitance Tolerance
±20% (M) (at 20℃, 120Hz)
Leakage Current I≦3 CV
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 5 minutes)
Dissipation Factor
(tanδ)
Rated voltage (Vdc) 450 to 500V
(at 20℃, 120Hz)tanδ (Max.) 0.20
Low Temperature
Characteristics
(Max. Impedance Ratio)
Rated voltage (Vdc) 450 to 500V
Z(-25℃)/Z(+20℃) 8
(at 120Hz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105℃.
Capacitance change ≦±20% of the initial value
D.F. (tanδ)≦200% of the initial specified value (475, 500Vdc : ≦ 250%)
Leakage current ≦The initial specified value
Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ≦±15% of the initial value
D.F. (tanδ)≦150% of the initial specified value
Leakage current ≦The initial specified value
◆DIMENSIONS [mm]
●
Terminal Code : LI (φ30,φ35)
Vent 4.5±1
L±2.5
φD+1max.
Negative mark
Sleeve (PET : Brown)
2
-
1.2×6
5±0.5
14.2±1
4.2±0.5
●Terminal Code : VS (
φ
22 to
φ
35) : Standard
4.0
±
0.5
φD+1max.
Vent L
±
2.5
Negative mark
Sleeve (PET : Brown)
10
2
-
φ2
The standard design has no plastic disc.
PC board pin-out
(View from Solder side)
PC board pin-out
(View from Solder side)
◆PART NUMBERING SYSTEM
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 100µF:101, 330µF:331)
Dummy terminal code
Terminal code(VS, LI)
Voltage code (ex. 450V:451, 475V:4H1)
Series code
Category
E L H S V S N SM
1 3 42 6 7 8 9 10 13125 18171611 1514
Please refer to "Product code guide (snap-in type)"
Upgrade!
Downsizing
Longer life
KMS
LXS
LHS
CAT. No. E1001U
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Long life snap-ins, 105℃
LHSSeries
◆STANDARD RATINGS
WV
(Vdc)
Cap
(µF)
Case size
φD×L(mm)
tanδ
Rated ripple
current
(Arms/
105℃, 120Hz)
Part No. WV
(Vdc)
Cap
(µF)
Case size
φD×L(mm)
tanδ
Rated ripple
current
(Arms/
105℃, 120Hz)
Part No.
450
100 22×25 0.20 0.71 ELHS451VSN101MP25S
475
150 30×25 0.20 1.01 ELHS4H1VSN151MR25S
120 22×30 0.20 0.81 ELHS451VSN121MP30S 180 30×30 0.20 1.11 ELHS4H1VSN181MR30S
150 22×35 0.20 0.93 ELHS451VSN151MP35S 180 35×25 0.20 1.08 ELHS4H1VSN181MA25S
150 25.4×25 0.20 0.93 ELHS451VSN151MQ25S 220 30×35 0.20 1.26 ELHS4H1VSN221MR35S
180 22×40 0.20 1.04 ELHS451VSN181MP40S 270 30×40 0.20 1.44 ELHS4H1VSN271MR40S
180 25.4×30 0.20 1.05 ELHS451VSN181MQ30S 270 35×30 0.20 1.35 ELHS4H1VSN271MA30S
220 22×45 0.20 1.17 ELHS451VSN221MP45S 330 30×45 0.20 1.63 ELHS4H1VSN331MR45S
220 25.4×35 0.20 1.21 ELHS451VSN221MQ35S 330 35×35 0.20 1.51 ELHS4H1VSN331MA35S
220 30×25 0.20 1.15 ELHS451VSN221MR25S 390 30×50 0.20 1.80 ELHS4H1VSN391MR50S
270 22×50 0.20 1.33 ELHS451VSN271MP50S 390 35×40 0.20 1.70 ELHS4H1VSN391MA40S
270 25.4×40 0.20 1.36 ELHS451VSN271MQ40S 470 30×60 0.20 2.05 ELHS4H1VSN471MR60S
270 30×30 0.20 1.29 ELHS451VSN271MR30S 470 35×45 0.20 1.91 ELHS4H1VSN471MA45S
270 35×25 0.20 1.25 ELHS451VSN271MA25S 470 35×50 0.20 1.95 ELHS4H1VSN471MA50S
330 22×60 0.20 1.54 ELHS451VSN331MP60S 560 35×60 0.20 2.21 ELHS4H1VSN561MA60S
330 25.4×45 0.20 1.54 ELHS451VSN331MQ45S
500
120 30×25 0.20 0.90 ELHS501VSN121MR25S
330 25.4×50 0.20 1.56 ELHS451VSN331MQ50S 150 30×30 0.20 1.02 ELHS501VSN151MR30S
330 30×35 0.20 1.46 ELHS451VSN331MR35S 150 35×25 0.20 0.99 ELHS501VSN151MA25S
330 35×30 0.20 1.41 ELHS451VSN331MA30S 180 30×35 0.20 1.14 ELHS501VSN181MR35S
390 25.4×60 0.20 1.74 ELHS451VSN391MQ60S 220 30×40 0.20 1.30 ELHS501VSN221MR40S
390 30×40 0.20 1.63 ELHS451VSN391MR40S 220 35×30 0.20 1.22 ELHS501VSN221MA30S
470 30×45 0.20 1.84 ELHS451VSN471MR45S 270 30×45 0.20 1.47 ELHS501VSN271MR45S
470 30×50 0.20 1.87 ELHS451VSN471MR50S 270 35×35 0.20 1.37 ELHS501VSN271MA35S
470 35×35 0.20 1.71 ELHS451VSN471MA35S 330 30×50 0.20 1.66 ELHS501VSN331MR50S
560 35×40 0.20 1.95 ELHS451VSN561MA40S 330 35×40 0.20 1.57 ELHS501VSN331MA40S
560 35×45 0.20 1.99 ELHS451VSN561MA45S 390 30×60 0.20 1.87 ELHS501VSN391MR60S
680 30×60 0.20 2.33 ELHS451VSN681MR60S 390 35×45 0.20 1.74 ELHS501VSN391MA45S
680 35×50 0.20 2.22 ELHS451VSN681MA50S 470 35×50 0.20 1.95 ELHS501VSN471MA50S
820 35×60 0.20 2.52 ELHS451VSN821MA60S 560 35×60 0.20 2.21 ELHS501VSN561MA60S
◆RATED RIPPLE CURRENT MULTIPLIERS
・Frequency Multipliers
Frequency(Hz) 50 120 300 1k 10k 50k
450Vdc 0.77 1.00 1.16 1.30 1.41 1.43
475, 500Vdc 0.70 1.00 1.16 1.30 1.41 1.43
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
CAT. No. E1001U
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
