C 091 A Characteristics General Characteristics Standard Characteristics 2 1)+ 3 Number of contacts 4 5 05-b 9 06-a 9 9 9 7 1 3 4 2 1 2 6 07-a 9 5 4 3 1 7 5 2 6 8 3 7 07-b 9 08-a 9 9 9 A 6 5 B 9 6 D C 9 5 4 1 K H J IEC 60130-92) 4 3 2 L O N M Contact arrangement 05-a 9 3 G 04-a 9 5 2 1 A 03-a 9 4 14 B DIN EN 61076-2-106 5 12 L Contact arrangement 4 1 8 DC 4 7 M K H J 1 7 E F 3 2 3 1 6 G 2 3 2 5 Stereo E F View on termination side of male contact insert 12-a 9 14-a 9 Electrical Characteristics Rated voltage 3) IEC 60664-1 Rated voltage UL 1977 300 V (100 V ) 300 V 100 V (63 V ) (32 V ) 300 V (63 V ) 100 V (32 V ) 150 V (32 V ) 250 V Rated impulse withstand voltage 3) IEC 60664-1 1500 V (840 V) 1200 V (500 V) 60 V 1500 V (840 V) 1200 V (500 V) Pollution degree 3) IEC 60664-1 Installation category IEC 60664-1 I Insulation group IEC 60664-1 II, 400 CTI < 600 Current rating IEC 60512-5-2 UL 1977 Insulation resistance IEC 60512-3-1 > 1010 4) Contact resistance IEC 60512-2-1 <5m Climatic category IEC 60068-1 40 / 100 / 56 Temperature range IEC 60068-1 - 40 C ... + 100 C / - 40 F ... + 212 F 1 (2) 5 A / + 40 C / + 104 F please refer also to current derating curves page 59 3 A / + 40 C / + 104 F Climatic Characteristics Mechanical Characteristics IP-degree IEC 60529 Insertion and withdrawal forces IEC 60512-13-2 Mechanical operation IEC 60512-9-1 IP 40 25 N 90.oz 30 N 110.oz 35 N 125.oz 50 N 180.oz 55 N 200.oz 60 N 220.oz 50 N 180.oz Silver 500 mating cycles Gold 1000 mating cycles Materials Housing material coupling ring brass, strain relief, die cast, nickel plated Dielectric material thermoplastic silver plated / gold plated 5) Contact plating Further Characteristics Termination technique solder, crimp Wire gauge solder: 0,5 mm2 / 20 AWG crimp: 2 - 6 pol (excluding 5S): 0,09 - 1,00 mm2 / 28 - 18 AWG crimp: 5S, 7, 7S and 8-pol.: 0,09 - 0,75 mm2 / 28 - 20 AWG Flammability Locking system solder: 0,25 mm / 24 AWG crimp: 0,09-0,25 mm / 28 - 24 AWG UL 94 V0 IEC 60130-9 DIN EN 61076-2-106 metal screw coupling; tightening torque 0,7 Nm Caution: Do not connect or disconnect under load. Metal housing parts shall be securely incorporated to protected ground. 1) 2 contact version: contact loading 1+3 2) Edition 2000-05 3) values in brackets are according to DIN EN 61076-2-106 4) under operating conditions >108 5) Remark for gold plated contacts: In order to avoid brittle inter-metallic connections, gold-plated terminals have to be tin-plated in the solder area. IEC 60 664 ^ = DIN VDE 0110; IEC 60 512-x ^ = DIN EN 60 512-x; IEC 60 130-9 ^= DIN EN 60 130-9; IEC 61076-2-106 ^= DIN EN 61076-2-106 9