PD - 9.1488 IRFI9634G PRELIMINARY HEXFET(R) Power MOSFET l l l l l l Advanced Process Technology Dynamic dv/dt Rating 150C Operating Temperature Fast Switching P-Channel Fully Avalanche Rated D VDSS = -250V RDS(on) = 1.0 G ID = -4.1A S Description Third Generation HEXFETs from International Rectifier provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness.Third Generation HEXFETs from International Rectifier provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The TO-220 Fullpak eliminates the need for additional insulating hardware in commercial-industrial applications. The moulding compound used provides a high isolation capability and a low thermal resistance between the tab and external heatsink. This isolation is equivalent to using a 100 micron mica barrier with standard TO-220 product. The Fullpak is mounted to a heatsink using a single clip or by a single screw fixing. TO-220 FULLPAK Absolute Maximum Ratings ID @ TC = 25C ID @ TC = 100C IDM PD @TC = 25C VGS EAS IAR EAR dv/dt TJ TSTG Parameter Max. Continuous Drain Current, VGS @ -10V Continuous Drain Current, VGS @ -10V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Mounting torque, 6-32 or M3 screw -4.1 -2.6 -16 35 0.28 20 520 -4.1 3.5 -5.0 -55 to + 150 Units A W W/C V mJ A mJ V/ns C 300 (1.6mm from case ) 10 lbf*in (1.1N*m) Thermal Resistance Parameter RJC RJA Junction-to-Case Junction-to-Ambient Typ. Max. Units --- --- 3.6 65 C/W 8/8/96 IRFI9634G Electrical Characteristics @ TJ = 25C (unless otherwise specified) RDS(on) VGS(th) gfs Parameter Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Static Drain-to-Source On-Resistance Gate Threshold Voltage Forward Transconductance Qg Qgs Qgd td(on) tr td(off) tf Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Min. -250 --- --- -2.0 2.2 --- --- --- --- --- --- --- --- --- --- --- Typ. --- -0.27 --- --- --- --- --- --- --- --- --- --- 12 23 34 21 IDSS Drain-to-Source Leakage Current LD Internal Drain Inductance --- 4.5 LS Internal Source Inductance --- 7.5 Ciss Coss Crss C Input Capacitance Output Capacitance Reverse Transfer Capacitance Drain to Sink Capacitance --- --- --- --- 680 170 40 12 V(BR)DSS V(BR)DSS/TJ IGSS Max. Units Conditions --- V VGS = 0V, ID = -250A --- V/C Reference to 25C, ID = -1mA 1.0 VGS = -10V, ID = -2.5A -4.0 V VDS = V GS, ID = -250A --- S VDS = -50V, ID = -4.1A -25 VDS = -250V, VGS = 0V A -250 VDS = -200V, VGS = 0V, T J = 150C 100 VGS = 20V nA -100 VGS = -20V 38 ID = -4.1A 8.0 nC VDS = -200V 18 VGS = -10V, See Fig. 6 and 13 --- VDD = -130V --- ID = -4.1A ns --- RG = 12 --- RD = 31, See Fig. 10 D Between lead, --- 6mm (0.25in.) nH G from package --- and center of die contact S --- VGS = 0V --- pF VDS = -25V --- = 1.0MHz, See Fig. 5 --- = 1.0MHz Source-Drain Ratings and Characteristics IS ISM VSD trr Qrr ton Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse RecoveryCharge Forward Turn-On Time Min. Typ. Max. Units Conditions D MOSFET symbol --- --- -4.1 showing the A G integral reverse --- --- -16 p-n junction diode. S --- --- -6.5 V TJ = 25C, IS = -4.1A, VGS = 0V --- 190 290 ns TJ = 25C, IF = -4.1A --- 1.5 2.2 C di/dt = -100A/s Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) Notes: Repetitive rating; pulse width limited by max. junction temperature. ( See fig. 11 ) Starting TJ = 25C, L = 62mH RG = 25, IAS = -4.1A. (See Figure 12) ISD -4.1A, di/dt -640A/s, VDD V(BR)DSS, TJ 150C Pulse width 300s; duty cycle 2%. IRFI9634G 100 100 VGS - 15V - 10V - 8.0V - 7.0V - 6.0V - 5.5V - 5.0V BOTTOM - 4.5V VGS - 15V - 10V - 8.0V - 7.0V - 6.0V - 5.5V - 5.0V BOTTOM - 4.5V TOP -ID , Drain-to-Source Current (A ) -ID , D rain-to-S ource C urrent (A ) TOP 10 20 s P U L S E W ID TH T c = 25 C A -4 .5V 1 1 10 10 1 100 1 10 -VD S , D rain-to-S ource V oltage (V ) Fig 2. Typical Output Characteristics, TJ = 150oC 2.5 R D S (on) , Drain-to-S ource O n Resistance (N orm alized) -I D , D rain-to -So urc e C urre nt (A ) 100 T J = 25 C 10 T J = 1 5 0 C V DS = -5 0 V 2 0 s P U L S E W ID TH 4 5 6 7 8 9 -VG S , Ga te -to-Source Volta ge (V) Fig 3. Typical Transfer Characteristics A 100 -VD S , D rain-to-S ource V oltage (V ) Fig 1. Typical Output Characteristics, TJ = 25oC 1 2 0 s P U LS E W ID TH T C = 1 50 C -4.5 V 10 A I D = -4.1 A 2.0 1.5 1.0 0.5 VG S = -1 0V 0.0 -60 -40 -20 0 20 40 60 80 100 120 T J , Junction T em perature (C ) Fig 4. Normalized On-Resistance Vs. Temperature A 140 160 IRFI9634G V GS C is s C rs s C o ss C , Capacitance (pF) 1000 = = = = 20 0V , f = 1M H z C g s + C g d , Cd s S H O R T E D C gd C d s + C gd -V G S , G ate-to-S ource V oltage (V ) 1200 C iss 800 600 C oss 400 C rss 200 0 10 16 12 8 4 FO R TE S T CIR C U IT S E E FIG U R E 1 3 0 100 -VD S , D rain-to-S ourc e V oltage (V ) 10 20 30 A 40 Q G , Total G ate C harge (nC ) Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage 100 100 O P E R A T IO N IN T H IS A R E A L IM ITE D B Y R D S (o n) -I D , D rain C urrent (A ) -IS D , R everse Drain C urrent (A ) V D S = -20 0V V D S = -12 5V V D S = -50 V 0 A 1 I D = -4 .1 A 10 T J = 1 50 C T J = 2 5 C 1 V G S = 0V 0.1 1.0 2.0 3.0 4.0 -VS D , S ourc e-to-D rain V oltage (V ) Fig 7. Typical Source-Drain Diode Forward Voltage A 5.0 10 100 s 1m s 1 10m s T C = 25 C T J = 15 0C S ing le P u lse 0.1 10 A 100 -VD S , D rain-to-S ourc e V oltage (V ) Fig 8. Maximum Safe Operating Area 1000 IRFI9634G 5.0 RD VDS VGS -ID , D rain C urrent (A m ps ) 4.0 D.U.T. RG + VDD 3.0 -10V Pulse Width 1 s Duty Factor 0.1 % 2.0 Fig 10a. Switching Time Test Circuit 1.0 td(on) tr t d(off) tf VGS 10% A 0.0 25 50 75 100 125 150 TC , C as e Tem perature (C ) 90% Fig 9. Maximum Drain Current Vs. Case Temperature VDS Fig 10b. Switching Time Waveforms Therm al R espon se (Z thJC ) 10 D = 0 .5 0 1 0 .2 0 0 .1 0 0 .0 5 0.1 PD M 0 .02 t 0 .01 t2 N o te s : 1 . D u ty f ac t or D = t S IN G L E P U L S E (T H E R M A L R E S P O N S E ) 0.01 0.00001 1 1 /t 2 2 . P e a k TJ = P D M x Z th J C + T C 0.0001 0.001 0.01 0.1 1 t 1 , R e c ta n g u la r P u lse D u ra tio n (se c ) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case A 10 IRFI9634G D .U .T RG A IA S -2 0 V tp VD D D R IV E R 0 .0 1 15V Fig 12a. Unclamped Inductive Test Circuit E A S , S ingle Pulse Avalanc he E nergy (m J) 600 L VDS TO P 500 BOTTOM 400 300 200 100 0 A 25 IAS ID -4 .1 A -5.2 A -8 .2A 50 75 100 125 S tarting T J , J unc tion T em perature (C ) Fig 12c. Maximum Avalanche Energy Vs. Drain Current tp V (BR)DSS Fig 12b. Unclamped Inductive Waveforms Current Regulator Same Type as D.U.T. 50K QG 12V .3F -10V QGS .2F QGD D.U.T. +VDS VGS VG -3mA Charge Fig 13a. Basic Gate Charge Waveform IG ID Current Sampling Resistors Fig 13b. Gate Charge Test Circuit 150 IRFI9634G Peak Diode Recovery dv/dt Test Circuit + D.U.T* Circuit Layout Considerations * Low Stray Inductance * Ground Plane * Low Leakage Inductance Current Transformer + - - + * dv/dt controlled by RG * ISD controlled by Duty Factor "D" * D.U.T. - Device Under Test RG VGS * + - VDD Reverse Polarity of D.U.T for P-Channel Driver Gate Drive P.W. D= Period P.W. Period [VGS=10V ] *** D.U.T. ISD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt Re-Applied Voltage Body Diode [VDD] Forward Drop Inductor Curent Ripple 5% *** VGS = 5.0V for Logic Level and 3V Drive Devices Fig 14. For P-Channel HEXFETS [ ISD ] IRFI9634G Package Outline TO-220 Fullpak Outline Dimensions are shown in millimeters (inches) 1 0 .6 0 (.4 1 7 ) 1 0 .4 0 (.4 0 9 ) o 3 .4 0 (.1 3 3 ) 3 .1 0 (.1 2 3 ) 4 .8 0 (.1 8 9 ) 4 .6 0 (.1 8 1 ) -A 3 .7 0 (.1 4 5 ) 3 .2 0 (.1 2 6 ) 1 6 .0 0 (.6 3 0 ) 1 5 .8 0 (.6 2 2 ) 2 .8 0 (.1 1 0 ) 2 .6 0 (.1 0 2 ) L E A D A S S IG N M E N T S 1 - G A TE 2 - D R A IN 3 - S O U RC E 7 .10 (.2 8 0 ) 6 .70 (.2 6 3 ) 1 .1 5 (.0 4 5 ) M IN. N O TE S : 1 D IM E N S IO N ING & T O L E R A N C ING P E R A N S I Y 1 4 .5 M , 1 9 8 2 1 2 3 2 C O N T R O L L IN G D IM E N S ION : IN C H . 3.3 0 (.1 30 ) 3.1 0 (.1 22 ) -B - 1 3 .7 0 (.5 4 0 ) 1 3 .5 0 (.5 3 0 ) C A 3X 1 .4 0 (.0 5 5) 1 .0 5 (.0 4 2) 0 .9 0 (.0 35 ) 3 X 0 .7 0 (.0 28 ) 0 .2 5 (.0 1 0 ) 2 .5 4 (.1 0 0 ) 2X 3X M A M B 0.4 8 (.0 1 9 ) 0.4 4 (.0 1 7 ) 2 .8 5 (.1 1 2 ) 2 .6 5 (.1 0 4 ) D B M IN IM U M C R E E P A G E D IS T A NC E B E TW E E N A -B -C -D = 4.8 0 (.1 8 9 ) Part Marking Information TO-220 Fullpak E X AEMXPALMEP: LETH 10 G : ISTHIS IS AISN AIR N F1 IR0FI840 W ITW H ITH A S SAS E MSBE LMYB LY L O TLOCTO DCO E DE 9 B 1EM401 A IN TE R N A TIO N A L IN TE R N AT IO NA L R E C TIF IE R IRIRFF10 0 RE C TIF IE R I8140G LOGO 9 2 4 6 LOGO 9BE 4 01 19 M 24 5 A SASSESM B LBL YY EM L OLO T T CO D DE E CO PA RT NU M B ERA P AR T NU M B ER D A TE C O D E (YDA Y WT EW )CO D E Y(Y Y YW = YWE)A R RK WYY W == YE W EA E W W = W EEK WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 322 3331 EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, UK Tel: ++ 44 1883 732020 IR CANADA: 7321 Victoria Park Ave., Suite 201, Markham, Ontario L3R 2Z8, Tel: (905) 475 1897 IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 6172 96590 IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 11 451 0111 IR FAR EAST: K&H Bldg., 2F, 3-30-4 Nishi-Ikeburo 3-Chome, Toshima-Ki, Tokyo Japan 171 Tel: 81 3 3983 0086 IR SOUTHEAST ASIA: 315 Outram Road, #10-02 Tan Boon Liat Building, Singapore 0316 Tel: 65 221 8371 http://www.irf.com/ Data and specifications subject to change without notice. 8/96