Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ GA(Bi-polar)
φ10<
φd±0.05
Sleeve
14 min.
3 min.
L✽
Pressure relief
φ6.3<
✽L<16:L±1.0
L>20:L±2.0
φ5toφ8
φD±0.5
F±0.5
φD±0.5
■Features
● Endurance : 105 °C 1000 h to 2000 h
● RoHS directive compliant
Radial Lead Type
Series: GA(Bi-polar) Type: A
■Di men sions in mm (not to scale)
(mm)
Body Dia. φD5 6.3 8 10
Lead Dia. φd0.5 0.5 0.6 0.6
Lead space F 2.0 2.5 3.5 5.0
■Specifi cations
Category Temp. Range –40 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 50 V.DC
Nominal Cap. Range 0.47 µF to 330 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent
I < 0.03 CV +3 (µA) After 2 minutes
or
I < 0.03 CV or 3 (µA) After 5 minutes (Whichever is greater)
tan δPlease see the attached standard products list
Endurance
After following life test of DC working voltage at +105 °C±2 °C
when the capacitors are restored to 20 °C, the capacitors shall meet the following limits.
Duration
✽φ5 to φ8 : 1000 hours (500 hours for each polarity)
✽φ10 : 2000 hours (1000 hours for each polarity)
Capacitance change ± 20% of initial measured value
tan δ< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
[mm]
Mar. 2008
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ GA(Bi-polar)
■Standard Prod ucts (Bi-polar)
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+105 °C
)
tan δ
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (µF) (mm) (mm)
(mA r.m.s.)
(mm) (mm) (mm) (mm) (pcs) (pcs)
6.3 100 6.3 11.2 130 0.30 0.5 2.5 5.0 2.5 ECA0JEN101( ) 200 2000
330 8 11.5 250 0.30 0.6 3.5 5.0 ECA0JEN331( ) 200 1000
10 47 5 11 90 0.24 0.5 2.0 5.0 2.5 ECA1AEN470( ) 200 2000
16
10 5 11 40 0.20 0.5 2.0 5.0 2.5 ECA1CEN100( ) 200 2000
22 5 11 60 0.20 0.5 2.0 5.0 2.5 ECA1CEN220( ) 200 2000
33 5 11 80 0.20 0.5 2.0 5.0 2.5 ECA1CEN330( ) 200 2000
47 6.3 11.2 100 0.20 0.5 2.5 5.0 2.5 ECA1CEN470( ) 200 2000
25
10 5 11 45 0.15 0.5 2.0 5.0 2.5 ECA1EEN100( ) 200 2000
22 6.3 11.2 60 0.150.5 2.5 5.0 2.5 ECA1EEN220( ) 200 2000
33 6.3 11.2 90 0.150.5 2.5 5.0 2.5 ECA1EEN330( ) 200 2000
47 6.3 11.2 110 0.15 0.5 2.5 5.0 2.5 ECA1EEN470( ) 200 2000
100 8 11.5 180 0.15 0.6 3.5 5.0 ECA1EEN101( ) 200 1000
35 33 8 11.5 100 0.15 0.6 3.5 5.0 ECA1VEN330( ) 200 1000
100 10 16 230 0.15 0.6 5.0 5.0 ECA1VEN101( ) 200 500
50
0.47 5 11 10 0.15 0.5 2.0 5.0 2.5 ECA1HENR47( ) 200 2000
15 11 100.15 0.5 2.0 5.0 2.5 ECA1HEN010( ) 200 2000
2.2 5 11 18 0.15 0.5 2.0 5.0 2.5 ECA1HEN2R2( ) 200 2000
3.3 5 11 25 0.15 0.5 2.0 5.0 2.5 ECA1HEN3R3( ) 200 2000
4.7 5 11 30 0.15 0.5 2.0 5.0 2.5 ECA1HEN4R7( ) 200 2000
10 6.3 11.2 50 0.150.5 2.5 5.0 2.5 ECA1HEN100( ) 200 2000
22 8 11.5 90 0.15 0.6 3.5 5.0 ECA1HEN220( ) 200 1000
33 8 11.5 110 0.15 0.6 3.5 5.0 ECA1HEN330( ) 200 1000
47 10 12.5 140 0.15 0.6 5.0 5.0 ECA1HEN470( ) 200 500
100 10 20 250 0.15 0.6 5.0 5.0 ECA1HEN101( ) 200 500
Endurance : 105 °C φ5 to φ8=1000 h (500 h for each polarity), φ10=2000 h (1000 h for each polarity)
When requesting taped product, please put the letter "B" or "i" be tween the "( )". Lead wire pitch ✽B=5 mm, i=2.5 mm.
The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide.
Jul. 2008
