SMD Super Fast Recovery Rectifiers ES2A-HF Thru. ES2J-HF Reverse Voltage: 50 to 600 Volts Forward Current: 2 Amp RoHS Device Halogen Free SMA/DO-214AC Features 0.177(4.50) 0.157(4.00) - For surface mounted applications. - Low profile package. 0.063(1.60) 0.051(1.30) - Glass passivated chip junction. 0.106(2.70) 0.091(2.30) - Super fast reverse recovery time. 0.205(5.20) 0.185(4.70) Mechanical data 0.012(0.31) 0.006(0.15) - Case: SMA 0.087(2.20) 0.075(1.90) - Terminals: Solderable per MIL-STD-750, method 2026. 0.059(1.50) 0.035(0.90) 0.012(0.30) Typ. Circuit Diagram Dimensions in inches and (millimeter) Anode Cathode Maximum Ratings and Electrical Characteristics Ratings at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz resistive or inductive load, for capacitive load, derate by 20% Symbols ES2A -HF ES2B -HF ES2C -HF ES2D -HF ES2E -HF ES2G -HF ES2J -HF Units Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 600 V Maximum RMS voltage VRMS 35 70 105 140 210 280 420 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 600 V Maximum average forward rectified current at TC = 125C IF(AV) 2 A Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load IFSM 50 A Parameter Max. forward voltage at 2A Maximum DC reverse current at rated DC blocking voltage 1.0 VF Ta = 25C Ta =125C 1.25 1.68 V IR 5 100 A Typical junction capacitance at VR = 4V, f = 1MHz Cj 40 pF Maximum reverse recovery time (Note 1) trr 35 ns RJA 60 C/W Tj, Tstg -55 ~ +150 C Typical thermal resistance (Note 2) Operating and storage temperature range Notes: 1. Measured with IF = 0.5A, IR = 1A, Irr = 0.25A. 2. P.C.B. mounted with 1.0 x 1.0" (2.54 x 2.54 cm) copper pad areas. Company reserves the right to improve product design , functions and reliability without notice. QW-JS012 REV:A Page 1 Comchip Technology CO., LTD. SMD Super Fast Recovery Rectifiers Rating and Characteristic Curves (ES2A-HF Thru. ES2J-HF) Fig.1 - Max. Average Forward Current Rating Fig.2 - Typical Reverse Characteristics 300 3.0 Reverse Current, IR (A) Average Forward Current, (A) TJ=125C 100 2.5 2.0 1.5 1.0 TJ=75C 10 TJ=25C 1.0 0.5 Single phase half-wave 60Hz resistive or inductive load 0 0 25 50 75 100 125 0.1 150 20 40 60 80 100 Case Temperature, (C) % of PIV.Volts Fig.3 - Typical Forward Characteristic Fig.4 - Typical Junction Capacitance 300 10 TJ=25C ES2A-HF~ ES2D-HF Junction Capacitance, (pF) Instantaneous Forward Current, (A) 0 1.0 ES2E-HF/ES2G-HF 0.1 ES2J-HF 0.01 0.001 0 0.5 1.0 1.5 2.0 2.5 100 10 TJ=25C f=1MHz Vsig=50mVp-p 1 0.1 Instantaneous Forward Voltage, (V) 1 10 100 Reverse Voltage, (V) Fig.5 - Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current, (A) 60 50 40 30 20 10 0 8.3ms single half sine wave (JEDEC Method) 1 10 100 Number of Cycles Company reserves the right to improve product design , functions and reliability without notice. QW-JS012 REV:A Page 2 Comchip Technology CO., LTD. SMD Super Fast Recovery Rectifiers Reel Taping Specification d P0 T P1 E Index hole F B W C P A 12 o 0 D1 D2 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 160mm (min) Start 400mm (min) Direction of Feed DO-214AC (SMA) SYMBOL A B C d D D1 D2 (mm) 2.70 0.10 5.33 0.10 2.35 0.10 1.55 0.05 330 2.00 75.00 1.00 13.00 0.20 (inch) DO-214AC (SMA) 0.106 0.004 0.210 0.004 0.093 0.004 0.061 0.002 12.992 0.079 2.953 0.039 0.512 0.008 SYMBOL E F P P0 P1 T W W1 (mm) 1.75 0.10 5.50 0.05 4.00 0.10 4.00 0.10 2.00 0.10 0.20 0.03 12.00 0.30 14.70 + 2.00 - 1.00 0.008 0.001 0.472 0.012 0.579 + 0.079 - 0.039 (inch) 0.069 0.004 0.217 0.002 0.157 0.004 0.157 0.004 0.079 0.004 Company reserves the right to improve product design , functions and reliability without notice. QW-JS012 REV:A Page 3 Comchip Technology CO., LTD. SMD Super Fast Recovery Rectifiers Marking Code Part Number Marking Code ES2A-HF ES2A ES2B-HF ES2B ES2C-HF ES2C ES2D-HF ES2D ES2E-HF ES2E ES2G-HF ES2G ES2J-HF ES2J XXXX Product type marking code Cathode band xxxx = Product type marking code Suggested PAD Layout D DO-214AC (SMA) SIZE A (mm) (inch) A 2.40 0.094 B 1.80 0.071 C 1.80 0.071 D 6.00 0.236 C B Note: 1. The pad layout is for reference purpose only. Standard Packaging REEL PACK Case Type DO-214AC (SMA) REEL Reel Size ( pcs ) (inch) 5,000 13 Company reserves the right to improve product design , functions and reliability without notice. QW-JS012 REV:A Page 4 Comchip Technology CO., LTD.