SN54BCT240, SN74BCT240 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS004F - OCTOBER 1987 - REVISED MARCH 2003 D Operating Voltage Range of 4.5 V to 5.5 V State-of-the-Art BiCMOS Design Significantly Reduces ICCZ D 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers ESD Protection Exceeds JESD 22 - 2000-V Human-Body Model (A114-A) SN54BCT240 . . . J OR W PACKAGE SN74BCT240 . . . DB, DW, N, OR NS PACKAGE (TOP VIEW) 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 2Y4 1A1 1OE VCC 1 VCC 2OE 1Y1 2A4 1Y2 2A3 1Y3 2A2 1Y4 2A1 1A2 2Y3 1A3 2Y2 1A4 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 1Y1 2A4 1Y2 2A3 1Y3 2Y1 GND 2A1 1Y4 2A2 1OE 1A1 2Y4 1A2 2Y3 1A3 2Y2 1A4 2Y1 GND SN54BCT240 . . . FK PACKAGE (TOP VIEW) 2OE D D description/ordering information These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. Together with the 'BCT241 and 'BCT244 devices, these devices provide the choice of selected combinations of inverting and noninverting outputs, symmetrical OE (active-low output-enable) inputs, and complementary OE and OE inputs. These devices feature high fan-out and improved fan-in. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. ORDERING INFORMATION PDIP - N 0C to 70C -55C to 125C ORDERABLE PART NUMBER PACKAGE TA TOP-SIDE MARKING Tube SN74BCT240N Tube SN74BCT240DW Tape and reel SN74BCT240DWR SOP - NS Tape and reel SN74BCT240NSR BCT240 SSOP - DB Tape and reel SN74BCT240DBR BT240 CDIP - J Tube SNJ54BCT240J SNJ54BCT240J CFP - W Tube SNJ54BCT240W SNJ54BCT240W SOIC - DW SN74BCT240N BCT240 LCCC - FK Tube SNJ54BCT240FK SNJ54BCT240FK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2003, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SN54BCT240, SN74BCT240 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS004F - OCTOBER 1987 - REVISED MARCH 2003 FUNCTION TABLE (each buffer) INPUTS OUTPUT Y OE A L H L L L H H X Z logic diagram (positive logic) 1 1OE 2 18 4 16 6 14 8 12 1A1 1A2 1A3 1A4 1Y1 1Y2 1Y3 1Y4 19 2OE 11 9 13 7 15 5 17 3 2A1 2A2 2A3 2A4 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 2Y1 2Y2 2Y3 2Y4 SN54BCT240, SN74BCT240 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS004F - OCTOBER 1987 - REVISED MARCH 2003 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 7 V Voltage range applied to any output in the disabled or power-off state, VO . . . . . . . . . . . . . . . . -0.5 V to 5.5 V Voltage range applied to any output in the high state, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to VCC Input clamp current, IIK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -30 mA Current into any output in the low state: SN54BCT240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 mA SN74BCT240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 mA Package thermal impedance, JA (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70C/W DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions (see Note 3) SN54BCT240 SN74BCT240 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 UNIT VCC VIH Supply voltage VIL IIK Low-level input voltage 0.8 0.8 V Input clamp current -18 -18 mA IOH IOL High-level output current -12 -15 mA Low-level output current 48 64 mA High-level input voltage 2 2 V V TA Operating free-air temperature -55 125 0 70 C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 SN54BCT240, SN74BCT240 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS004F - OCTOBER 1987 - REVISED MARCH 2003 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK VOH SN54BCT240 TYP MAX TEST CONDITIONS VCC = 4.5 V, VCC = 4.5 V MIN II = -18 mA IOH = -3 mA SN74BCT240 TYP MAX MIN -1.2 IOH = -12 mA IOH = -15 mA 2.4 3.3 2 3.2 -1.2 2.4 V 3.3 V 2 0.38 UNIT 3.1 VOL VCC = 4 4.5 5V IOL = 48 mA IOL = 64 mA 0.55 II IIH VCC = 5.5 V, VCC = 5.5 V, VI = 7 V VI = 2.7 V 0.1 0.1 mA 20 20 A IIL IOZH VCC = 5.5 V, VCC = 5.5 V, VI = 0.5 V VO = 2.7 V -1 -1 mA 50 50 A IOZL IOS VCC = 5.5 V, VCC = 5.5 V, VO = 0.5 V VO = 0 -50 -50 A -225 mA ICCH ICCL VCC = 5.5 V, VCC = 5.5 V, Outputs open 19 31 19 31 mA Outputs open 46 71 46 71 mA ICCZ Ci VCC = 5.5 V, VCC = 5 V, Outputs open 6 9 6 9 mA VI = 2.5 V or 0.5 V VO = 2.5 V or 0.5 V 6 0.42 -100 -225 -100 Co VCC = 5 V, 11 All typical values are at VCC = 5 V. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 0.55 V 6 pF 11 pF switching characteristics (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 5 V, CL = 50 pF, R1 = 500 , R2 = 500 , TA = 25C VCC = 4.5 V to 5.5 V, CL = 50 pF, R1 = 500 , R2 = 500 , TA = MIN to MAX 'BCT240 tPLH tPHL A Y tPZH tPZL OE Y tPHZ tPLZ OE Y SN54BCT240 SN74BCT240 MIN TYP MAX MIN MAX MIN MAX 0.5 3.3 4.8 0.5 6.4 0.5 5.6 0.4 1.8 3.5 0.4 4.5 0.4 4 1 6.4 7.9 1 9.2 1 8.8 1 7.5 9.4 1 10.8 1 10.5 1 6 6.8 1 8.5 1 8.1 1 6.7 8.1 1 10.6 1 9.5 For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. 4 POST OFFICE BOX 655303 UNIT * DALLAS, TEXAS 75265 ns ns ns SN54BCT240, SN74BCT240 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS004F - OCTOBER 1987 - REVISED MARCH 2003 PARAMETER MEASUREMENT INFORMATION 7 V (tPZL, tPLZ, O.C.) S1 Open (all others) From Output Under Test Test Point CL (see Note A) R1 From Output Under Test R1 Test Point CL (see Note A) R2 LOAD CIRCUIT FOR TOTEM-POLE OUTPUTS RL = R1 = R2 LOAD CIRCUIT FOR 3-STATE AND OPEN-COLLECTOR OUTPUTS High-Level Pulse (see Note B) 3V Timing Input (see Note B) 3V 1.5 V 1.5 V 0V 1.5 V tw 0V Data Input (see Note B) 3V th tsu Low-Level Pulse 3V 1.5 V 1.5 V 0V 1.5 V 1.5 V VOLTAGE WAVEFORMS PULSE DURATION 0V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES 3V 3V Input (see Note B) 1.5 V 1.5 V 0V tPLH In-Phase Output (see Note D) VOH 1.5 V 1.5 V VOL VOH 1.5 V 1.5 V 0V tPLZ 1.5 V Waveform 1 (see Notes C and D) 3.5 V VOL tPHZ tPLH 1.5 V 1.5 V tPZL tPHL tPHL Out-of-Phase Output (see Note D) Output Control (low-level enable) 0.3 V tPZH Waveform 2 (see Notes C and D) VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES (see Note D) VOH 1.5 V 0.3 V 0V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS NOTES: A. CL includes probe and jig capacitance. B. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, tr = tf 2.5 ns, duty cycle = 50%. C. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. D. The outputs are measured one at a time with one transition per measurement. E. When measuring propagation delay times of 3-state outputs, switch S1 is open. F. All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuit and Voltage Waveforms POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (C) Device Marking (3) (4/5) 5962-9074201M2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629074201M2A SNJ54 BCT240FK 5962-9074201MRA ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9074201MR A SNJ54BCT240J 5962-9074201MSA ACTIVE CFP W 20 1 TBD Call TI N / A for Pkg Type -55 to 125 5962-9074201MS A SNJ54BCT240W SN74BCT240DBLE OBSOLETE SSOP DB 20 TBD Call TI Call TI 0 to 70 SN74BCT240DW ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 BCT240 SN74BCT240DWE4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 BCT240 SN74BCT240DWG4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 BCT240 SN74BCT240N ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 SN74BCT240N SN74BCT240NE4 ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 SN74BCT240N SN74BCT240NSR ACTIVE SO NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 BCT240 SN74BCT240NSRE4 ACTIVE SO NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 BCT240 SN74BCT240NSRG4 ACTIVE SO NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 BCT240 SNJ54BCT240FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629074201M2A SNJ54 BCT240FK SNJ54BCT240J ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9074201MR A SNJ54BCT240J Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 25-Sep-2013 Status (1) SNJ54BCT240W ACTIVE Package Type Package Pins Package Drawing Qty CFP W 20 1 Eco Plan Lead/Ball Finish (2) TBD MSL Peak Temp Op Temp (C) Device Marking (3) Call TI N / A for Pkg Type (4/5) -55 to 125 5962-9074201MS A SNJ54BCT240W (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN54BCT240, SN74BCT240 : * Catalog: SN74BCT240 Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 * Military: SN54BCT240 NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product * Military - QML certified for Military and Defense Applications Addendum-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN74BCT240NSR Package Package Pins Type Drawing SO NS 20 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2000 330.0 24.4 Pack Materials-Page 1 8.2 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 13.0 2.5 12.0 24.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74BCT240NSR SO NS 20 2000 367.0 367.0 45.0 Pack Materials-Page 2 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2013, Texas Instruments Incorporated