Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
● Endurance: 4000 h at 125 °C (High temperature / Long life)
● Low ESR and high ripple current (85 % over, Lower ESR than current V-TP)
● High-withstand voltage ( to 80 V.DC), Low LC (0.01 CV or 3 μA)
● Equivalent to conductive polymer type aluminum electrolytic capacitor
(There are little characteristics change by temperature and frequency)
● Vibration-proof product is available upon request. New lineup of φ6.3 product. (φ6.3, φ8, φ10)
● AEC-Q200 compliant
● RoHS compliant
Example : 25 V.DC 33 μF
Marking color : BLACK
·The dimensions of the vibration-proof products, please refer to the page ofthe mounting specification.
10.0 max.
J
63
Unit：V.DC
0.35
+0.15
-0.20
D
6.3
6.6
7.8 max.
2.6
C
5.0
5.8±0.3
5.3
6.5 max.
V
H
25
35
50
F
8.0
10.2±0.3
8.3
Within ±30% of the initial value
≦ 200 % of the initial limit
Within ±30% of the initial value
≦ 200 % of the initial limit
≦ 300 % of the initial limit
Within the initial limit
φD
Size code
I
H
A,B
L
Within ±10% of the initial value
Within the initial limit
≦ 200 % of the initial limit
Within the initial limit
W
Unit：ｍｍ
K
P
25 V.DC to 50 V.DC
05-Dec-18
Should a safety concern arise regarding this product, please be sure to contact us immediately.
D8
6.3
7.7±0.3
6.6
7.8 max.
2.6
0.65±0.1
1.8
0.35
+0.15
-0.20
G
10.0
10.2±0.3
10.3
3.5
0.90±0.2
4.6
12.0 max.
K
Capacitance change
Dissipation factor (tan δ)
5.8±0.3
0.70±0.2
0.70±0.2
E
After storage for 1000 hours at +125 °C ± 2 °C with no voltage applied and then being
(With voltage treatment)
±20 % (120 Hz / +20 ℃)
I ≦ 0.01 CV or 3 (μA) After 2 minutes (whichever is greater)
Please see the attached characteristics list
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the
+85 °C ± 2 ℃, 85 % to 90 %, 2000 h, rated voltage applied
stabilized at +20 °C,　capacitors shall meet the limits specified in endurance.
+125 °C ± 2 ℃, 3000 h, apply the rated ripple current without exceeding the rated voltage.
2.2
0.65±0.1
1.5
3.1
3.4
0.90±0.2
80
≦ 200 % of the initial limit
≦ 200 % of the initial limit
Surface Mount Type
Marking
Capacitance change
Capacitance change
Dissipation factor (tan δ)
ESR
Within ±30% of the initial value
Endurance 2
Shelf life
Damp heat (Load)
Resistance to
soldering heat
following limits.
DC leakage current
Within the initial limit
Dimensions (not to scale)
ESR
DC leakage current
Series:
ZC
Type:
V
Capacitance tolerance
Nominal cap.range
Rated voltage range
Specifications
Size code
Features
High temperature lead-free reflow
D
D8
F
G
–55 ℃ to +125 ℃
C
Category temp. range
25 V.DC to 63 V.DC
25 V.DC to 80 V.DC
Rated voltage mark
10 μF to 33 μF
10 μF to 56 μF
22 μF to 100 μF
22 μF to 220 μF
33 μF to 330 μF
DC leakage current
Dissipation factor (tan δ)
Endurance 1
+125 °C ± 2 ℃, 4000 h, apply the rated ripple current without exceeding the rated voltage.
DC leakage current
Within the initial limit
DC leakage current
Dissipation factor (tan δ)
Capacitance change
Dissipation factor (tan δ)
ESR
+0.15
0.65±0.1
1.8
0.35
-0.20
+
–
0.3 max.
φD±0.5
Pressure relief (φ10 and larger)
L
H
A±0.2
B±0.2
W
（I）
（P）
( )Reference size
（I）
33
EZC
Negative polarity marking (–)
Capacitance (μF)
Series identification
Rated voltage mark
Lot number
UP GRADE
K
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Endurance 1 : 125 ℃ 4000 h
Endurance 2 : 125 ℃ 3000 h
*1: Ripple current (100 kHz　/ +125 ℃)
*2: ESR (100 kHz / +20 ℃)
*3: tan δ (120 Hz / +20 ℃)
・ Please refer to the page of “Reflow profile” and “The taping dimensions”.
・ The dimensions of the vibration-proof products, please refer to the page of the mounting specification.
–
750
1100
1250
1600
1600
700
–
–
–
–
1400
1400
1050
–
EEHZC1H220P
EEHZC1H330XP
EEHZC1H680P
G
C
D
D8
F
20
120
ESR*2
(mΩ)
tan δ
*3
Rated
voltage
(V.DC)
Specification
Size
code
Capaci-
tance
(±20 %)
(μF)
5.8
5.8
7.7
Case size
(mm)
LφD
Endurance 1 Endurance 2
Ripple current *1
(mA r.m.s.)
C
D
550
900
5.0
6.3
D8
–
EEHZC1J100V
Taping
(pcs)
Vibration-proof
product
Part number
Standard
Product
EEHZC1E330R
EEHZC1E560P
EEHZC1E101XP
EEHZC1E221P
EEHZC1E331P
EEHZC1V220R
EEHZC1H101P
EEHZC1H121P
EEHZC1J100P
EEHZC1V470P
EEHZC1V680XP
EEHZC1V151P
–
EEHZC1E101XV
EEHZC1E221V
EHZC1E331V
EEHZC1V271P
EEHZC1H100R
–
EEHZC1V470V
EEHZC1V680XV
EEHZC1V151V
1000
1000
900
500
500
1000
1000
900
500
500
500
500
500
45
40
500
EEHZC1J220XV
EEHZC1J330V
EEHZC1J560V
EEHZC1K220V
EEHZC1K330V
EEHZC1K470V
500
500
EEHZC1K330P
EEHZC1K470P
EEHZC1J220XP
EEHZC1J330P
EEHZC1J470P
EEHZC1J470V
0.08
EEHZC1J680V
EEHZC1J820V
1000
900
500
–
–
900
1100
500
1000
1000
900
500
500
500
80
40
30
EEHZC1V271V
–
EEHZC1H220V
EEHZC1H330XV
EEHZC1H680V
EEHZC1H101V
EEHZC1H121V
–
–
1900
2800
900
1400
1600
2000
500
1400
1600
2000
550
80
50
30
27
20
100
–
–
1900
2900
–
60
35
27
0.12
0.10
0.10
0.10
0.10
0.10
0.10
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.14
0.14
0.14
0.14
0.14
0.12
0.12
0.12
0.12
6.3
8.0
10.0
5.0
6.3
6.3
8.0
D
D8
F
10.2
5.8
F
G
C
F
G
28
28
120
80
–
–
–
1400
D
1360
–
–
–
–
–
40
30
30
30
D8
G
1100
10.2
G
G
10.0
100
120
10.0
10.2
5.8
7.7
10.2
10.2
5.8
5.8
7.7
10.2
10.0
5.0
6.3
6.3
8.0
10.2
25
50
35
80
63
10.2
10.2
10.2
F
G
G
6.3
6.3
8.0
10.0
10.0
10.0
8.0
10.0
10.0
56
68
82
22
500Hz ≦ f＜ 1kHz
10
22
33
33
56
100
220
330
22
47
68
150
270
10
22
33
68
5.8
7.7
10.2
10.2
10.2
10.2
0.10
0.10
0.15
8.0
10.2
F
0.60
5kHz ≦ f＜ 10kHz
0.30
0.30
Rated capacitance（C）
150μF ≦ C
0.25
0.25
300Hz ≦ f＜ 500Hz
0.25
0.20
200Hz ≦ f＜ 300Hz
0.15
0.15
100Hz ≦ f＜ 200Hz
47μF ≦ C ＜ 150μF
3kHz ≦ f＜ 5kHz
0.20
Correction
factor
0.40
0.55
150μF ≦ C
47μF ≦ C ＜ 150μF
C ＜ 47μF
47
36
Frequency (f)
Correction
factor
G
33
47
1kHz ≦ f＜ 2kHz
0.30
Rated capacitance（C）
36
1360
2kHz ≦ f＜ 3kHz
EEHZC1J560P
EEHZC1J680P
EEHZC1J820P
EEHZC1K220P
C ＜ 47μF
0.85
0.85
40kHz ≦ f＜ 50kHz
0.75
0.70
10kHz ≦ f＜ 15kHz
0.45
0.80
0.85
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05-Dec-18
Size
ESR（Ω）
φ5ｘL5.8
φ6.3ｘL5.8
φ6.3ｘL7.7
φ8ｘL10.2
2
1.4
0.8
0.4
0.3
φ10ｘL10.2
Characteristics list
Min.packaging
q'ty
Frequency correction factor for ripple current
500kHz ≦ f
0.80
0.85
30kHz ≦ f＜ 40kHz
Frequency (f)
Frequency (f)
20kHz ≦ f＜ 30kHz
0.60
0.65
Correction
factor
C ＜ 47μF
Frequency (f)
Rated capacitance（C）
Rated capacitance（C）
150μF ≦ C
100kHz ≦ f＜ 500kHz
0.85
0.80
47μF ≦ C ＜ 150μF
0.45
0.40
After endurance ESR (100 kHz, –40 °C)
0.45
0.50
0.60
0.65
0.70
0.75
0.90
50kHz ≦ f＜ 100kHz
0.80
0.75
15kHz ≦ f＜ 20kHz
0.50
1.05
Correction
factor
0.90
C ＜ 47μF
1.00
1.00
1.00
150μF ≦ C
47μF ≦ C ＜ 150μF
1.00
1.00
NEW
■ If you want to use our products described in this online catalog for applications requiring
special qualities or reliability, or for applications where the failure or malfunction of the
products may directly jeopardize human life or potentially cause personal injury
(e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion
equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety
equipment), it is necessary to verify whether the specifications of our products fit to such
applications. Please ensure that you will ask and check with our inquiry desk as to whether
the specifications of our products fit to such applications use before you use our products.
■ The quality and performance of our products as described in this online catalog only apply
to our products when used in isolation. Therefore, please ensure you evaluate and verify
our products under the specific circumstances in which our products are assembled in your
own products and in which our products will actually be used.
■ If you use our products in equipment that requires a high degree of reliability, regardless
of the application, it is recommended that you set up protection circuits and redundancy
circuits in order to ensure safety of your equipment.
■ The products and product specifications described in this online catalog are subject to
change for improvement without prior notice. Therefore, please be sure to request and
confirm the latest product specifications which explain the specifications of our products in
detail, before you finalize the design of your applications, purchase, or use our products.
■ The technical information in this online catalog provides examples of our products'
typical operations and application circuits. We do not guarantee the non-infringement of
third party's intellectual property rights and we do not grant any license, right, or interest
in our intellectual property.
■ If any of our products, product specifications and/or technical information in this online
catalog is to be exported or provided to non-residents, the laws and regulations of the
exporting country, especially with regard to security and export control, shall be observed.
■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies
depending on the part number or series of our products.
■ When you use the inventory of our products for which it is unclear whether those products
are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the
website inquiry form and contact us.
We do not take any responsibility for the use of our products outside the scope of the
specifications, descriptions, guidelines and precautions described in this online catalog.
Guidelines and precautions regarding the
described in this online catalog.
<Regarding the Certificate of Compliance with
01-Apr-19
technical information and use of our products
the EU RoHS Directive/REACH Regulations>