DC COMMON MODE CHOKE COIL <SMD Type:CPFC Series>
Type: CPFC74
Please refer to the sales offices on our website for a representative near you
www.sumida.com 1/2
MARK OF POLARITY
②③
①④
②③
MARK OF POLARITY
①④
◆ Product Description
・9.5×5.7mm Max.(L×W), 5.1mm Max. Height .
◆ Feature
・Ideally used in CAN BUS ,AV,OA equipment.
・RoHS Compliance
◆ Dimensions (mm)
＊ Dimension does not include solder used on coil.
◆ Land Pattern (mm) ◆ Schematics (Bottom)
or
◆ Specification (For CAN bus)
Part Name. Stamp
Impedance (Ω)
(L1,L2 Parallel)
(10～100MHz)
Insulation
Resistance
(MΩ)(Coil-Coil)
(DC80V 1min)
Withstanding
Voltage (coil-coil)
(5sec)
D.C.R. (Ω)
(1-2)at 20℃
(3-4) short
※
CPFC74NP-CB1ØM4 C10M 1000 MIN. 100 MIN. 200V DC 0.6 MAX.
CPFC74NP-CBØ8M6 C08M 800 MIN. 100 MIN. 200V DC 0.5 MAX.
※ D.C.R. is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is
measured by 1 line.
7.0±0.2
5.5±0.2
5.08 MAX. 6.4±0.2
9.5 MAX.
2.54±0.15
1.3±0.1
0.15
1.6
6.7
9.9
2.54
1.8
DC COMMON MODE CHOKE COIL <SMD Type:CPFC Series>
Type: CPFC74
Please refer to the sales offices on our website for a representative near you
www.sumida.com 2/2
◆ Specification (For Power supply)
Part Name. Stamp
Impedance (Ω)
(L1,L2 Parallel)
Insulation
Resistance
(MΩ)(Coil-Coil)
(DC100V 1min.)
Withstanding
Voltage
(Coil-Coil)
(5sec)
D.C.R. (mΩ)
(1-2)at 20℃
(3-4) Short
※2
Rated
Current
(1-2)(A)
(3-4) Short
※1
CPFC74NP-PS1ØH2A15 P15H 700 MIN.
(
100 MHz
)
10 MIN. D.C.125V 120 1.5
CPFC74NP-PSØ2H2A2Ø P20H 200 MIN.
(
20～300MHz
)
10 MIN. D.C.125V 120 2.0
CPFC74NP-PSØ3H2A25 P25H 300 MIN.
(
160 MHz
)
10 MIN. D.C.125V 120 2.5
CPFC74NP-PSØ1H2A3Ø P30H 100 MIN. 10 MIN. D.C.125V 60 3.0
※1: Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃).
※2: D.C.R is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is
measured by 1 line.
