DC COMMON MODE CHOKE COIL <SMD Type:CPFC Series> Type: CPFC74 Product Description 9.5x5.7mm Max.(LxW), 5.1mm Max. Height . Feature Ideally used in CAN BUS ,AV,OA equipment. RoHS Compliance 1.30.1 2.540.15 Dimensions (mm) 5.50.2 0.15 7.00.2 6.40.2 9.5 MAX. 5.08 MAX. Dimension does not include solder used on coil. Land Pattern (mm) Schematics (Bottom) 1.8 1.6 2.54 or 6.7 MARK OF POLARITY MARK OF POLARITY 9.9 Specification (For CAN bus) Insulation Impedance () Resistance (L1,L2 Parallel) (M)(Coil-Coil) (10100MHz) (DC80V 1min) Withstanding Voltage (coil-coil) (5sec) D.C.R. () (1-2)at 20 (3-4) short Part Name. Stamp CPFC74NP-CB1OM4 C10M 1000 MIN. 100 MIN. 200V DC 0.6 MAX. CPFC74NP-CBO8M6 C08M 800 MIN. 100 MIN. 200V DC 0.5 MAX. D.C.R. is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is measured by 1 line. Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 DC COMMON MODE CHOKE COIL <SMD Type:CPFC Series> Type: CPFC74 Specification (For Power supply) Part Name. Impedance () Stamp (L1,L2 Parallel) CPFC74NP-PS1OH2A15 P15H CPFC74NP-PSO2H2A2O P20H CPFC74NP-PSO3H2A25 P25H CPFC74NP-PSO1H2A3O P30H 700 MIN. (100 MHz) 200 MIN. (20300MHz) 300 MIN. (160 MHz) 100 MIN. Insulation Resistance (M)(Coil-Coil) (DC100V 1min.) Withstanding Voltage (Coil-Coil) (5sec) D.C.R. (m) (1-2)at 20 (3-4) Short 2 Rated Current (1-2)(A) (3-4) Short 1 10 MIN. D.C.125V 120 1.5 10 MIN. D.C.125V 120 2.0 10 MIN. D.C.125V 120 2.5 10 MIN. D.C.125V 60 3.0 1: Rated current: The DC current at which the temperature rise is t40.(Ta20). 2: D.C.R is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is measured by 1 line. Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2