DC COMMON MODE CHOKE COIL <SMD Type:CPFC Series>
Type: CPFC74
Please refer to the sales offices on our website for a representative near you
www.sumida.com 1/2
MARK OF POLARITY
②③
①④
②③
MARK OF POLARITY
①④
Product Description
9.5×5.7mm Max.(L×W), 5.1mm Max. Height .
Feature
Ideally used in CAN BUS ,AV,OA equipment.
RoHS Compliance
Dimensions (mm)
Dimension does not include solder used on coil.
Land Pattern (mm) Schematics (Bottom)
or
Specification (For CAN bus)
Part Name. Stamp
Impedance (Ω)
(L1,L2 Parallel)
(10100MHz)
Insulation
Resistance
(MΩ)(Coil-Coil)
(DC80V 1min)
Withstanding
Voltage (coil-coil)
(5sec)
D.C.R. (Ω)
(1-2)at 20
(3-4) short
CPFC74NP-CB1ØM4 C10M 1000 MIN. 100 MIN. 200V DC 0.6 MAX.
CPFC74NP-CBØ8M6 C08M 800 MIN. 100 MIN. 200V DC 0.5 MAX.
D.C.R. is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is
measured by 1 line.
7.0±0.2
5.5±0.2
5.08 MAX. 6.4±0.2
9.5 MAX.
2.54±0.15
1.3±0.1
0.15
1.6
6.7
9.9
2.54
1.8
DC COMMON MODE CHOKE COIL <SMD Type:CPFC Series>
Type: CPFC74
Please refer to the sales offices on our website for a representative near you
www.sumida.com 2/2
Specification (For Power supply)
Part Name. Stamp
Impedance (Ω)
(L1,L2 Parallel)
Insulation
Resistance
(MΩ)(Coil-Coil)
(DC100V 1min.)
Withstanding
Voltage
(Coil-Coil)
(5sec)
D.C.R. (mΩ)
(1-2)at 20
(3-4) Short
2
Rated
Current
(1-2)(A)
(3-4) Short
1
CPFC74NP-PS1ØH2A15 P15H 700 MIN.
(
100 MHz
)
10 MIN. D.C.125V 120 1.5
CPFC74NP-PSØ2H2A2Ø P20H 200 MIN.
(
20300MHz
)
10 MIN. D.C.125V 120 2.0
CPFC74NP-PSØ3H2A25 P25H 300 MIN.
(
160 MHz
)
10 MIN. D.C.125V 120 2.5
CPFC74NP-PSØ1H2A3Ø P30H 100 MIN. 10 MIN. D.C.125V 60 3.0
1: Rated current: The DC current at which the temperature rise is t40.(Ta20).
2: D.C.R is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is
measured by 1 line.