7-AirBorn THE CONNECTOR COMPANY D, ROW Cable to Board or PC Card WTA20PCJT .100" WTA - WTB 10 thru 70 Contacts 3} LE. 120 DIA THRU + .250 +] .050 (2 PLCS) \ /125 130 TYP Le 7 P1080 .050 | [250 #2-56 JACKSCREW 100 | [ fe # TYP oH a 1 O56 s Oo POSITION #1 AB 9 B C DE t oO L 0274.01 DIA TYP t{[2 .030.001 { re a LQ DIA TYP ot+h (2 PLCS) FACIY 407 pa se LARS =|(2 PLCS) YY .050 TYP SF ~ ] 100. TYP 075} fe 100 IN | | .100 500 .335 | .150 7] 1180 #2-56 JACKSOCKET TYP .094 - i -100 = | L075 |- .335 +}.140 -| 150 -- PLUG RECEPTACLE DIMENSIONS SIZE| A B Cc D E |SsizE}] A B Cc D E 10 | .850 [ .650 | .400 | 1.100 | 1.350 | 44 | 2550] 2.350 | 2.100 [ 2.800 | 3.050 14 | 1.050 | .850 | .600 | 1.300 | 1.550 | 50 | 2.850] 2.650 | 2.400 | 3.100 | 3.350 20 | 1.350 | 1.150 [ .g00 | 1.600 | 1.850 | 54 | 3.050 | 2.850 | 2.600 | 3.300 | 3.550 24 | 1.550 | 1.350 | 1.100 | 1.800 | 2.050 | 56 | 3.150 [ 2.950 | 2.700 | 3.400 | 3.650 26 | 1.650 | 1.450 | 1.200 | 1.900 | 2.150 | 60 | 3.350 | 3.150 | 2.900 | 3.600 | 3.850 30 | 1.850 | 1.650 | 1.400 | 2.100 | 2.350 [ 66 | 3.650 | 3.450 | 3.200 | 3.900 | 4.150 36 | 2.150 | 1.950 | 1.700 | 2.400 | 2.650 [ 70 | 3.850] 3.650 | 3.400 | 4.100 | 4.350 40 | 2.350] 2.150 [| 1.900 | 2.600 | 2.850 "W" Series Connectors AirBorn 4321 AirBorn Drive Addison, TX 75001-0519 REV A W-27 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com CTWO27(\-AirBorn THE CONNECTOR COMPANY PLUG: WTA 20 PC JT RECEPTACLE: WTB 20 SAD9 J PLUG RECEPTACLE | SERIES | WTA Plug, straight, without mounting ears WTB __ Receptacle, straight, with mounting ears WTB _ Receptacle, right angle, with mounting ears | SIZE XX Number of contacts (10, 14, 20, 24, 26, 30, 36, 40, | XX Number of contacts (10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, or 70) 44, 50, 54, 56, 60, 66, or 70) | CONTACTS e Pin or socket contacts can be used in either plug or receptacle. @ WTA connectors - jackset hardware determines the image. Must specify image with guide set hardware. See page W-17. @ WTB connectors - contacts determine the image. Right angle pin contacts are always plug image, and straight pin or sockets are receptacle image. @ When pin contacts are used, standard hardware orientation places the female hardware next to the #1 pin contact. @ When socket contacts are used, standard hardware orientation places the male hardware next to the #1 socket contact. TYPE CONTACTS/TERMINATIONS: TYPE CONTACTS/TERMINATIONS: PC Pin, straight, solder cup (.035" 1.D.) SAC Socket, straight, solder cup (.035" |.D.) PD7 Pin, straight, dip solder, .109" x .027" dia SAD7 = Socket, straight, dip solder, .109" x .027" dia PD9 Pin, straight, dip solder, .140" x .027" dia SAD9 Socket, straight, dip solder, .140" x .027" dia PD11_ Pin, straight, dip solder, .172" x .027" dia SAD11 Socket, straight, dip solder, .172" x .027" dia PD13 Pin, straight, dip solder, .203" x .027" dia SAF3 = Socket, straight, flex circuit, 050" PF3 Pin, straight, flex circuit, .050" SAF6 = Socket, straight, flex circuit, .093" PF6 Pin, straight, flex circuit, 093" SAF9 = Socket, straight, flex circuit, .140" PF8 Pin, straight, flex circuit, .125" SAP Socket, straight, pin termination, .150" (connector saver) PW34 Pin, straight, wire wrap 531" SAW24 Socket, straight, wire wrap 375" PW40 Pin, straight, wire wrap .625" SAW40. Socket, straight, wire wrap 625" SOR7 Socket, right angle, dip solder, .109 x .025" dia SOR9 = Socket, right angle, dip solder, .140" x .025" dia SOR11 Socket, right angle, dip solder, .172" x .025" dia HARDWARE @ Plug facial seal gaskets and hoods; order separately or add "Q" in part number. Example: WTA10PD9QJ. See "Gaskets" and "Hoods" under next tab for instructions. XXX XX XXXX XX JT Turning jackset, .500" J Fixed jackset JTA Turning jackset, .200" JL Fixed jackset, long JTB Hex turning jackset, .200" JTC Hex turning jackset, .500" JTL Turning jackset, long, .700" OPTIONS Option Codes: Add to the end of the part number. Example: WTA10SAD9J-D01. Call factory for additional codes. -B82 -342 -D01 -D54 -G69 REV A CTW028 Termination face sealed against conformal coating Remove mounting ears (.250" each end) Pre-tinned contact terminations (except solder cups, wire wraps and flex contacts) Combine -B82 & -D01 options Solder cups fixed in an outward orientation (otherwise contacts will rotate) AirBorn 4321 AirBorn Drive Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com "W" Series Connectors W-28