HEWLETT* PACKARD & High Speed Receptacle Photodiodes Technical Data Features Industry Standard FC Connector Low Dark Current * High Reliability Planar InGaAs PIN Photodiode * High Responsivity Applications * Instrumentation O-E Converters * Single and Multimode Fiber Communications Systems * Data Communications Receivers Description The PDT0313-FC-A uses Hewlett- Packards highly reliable top entry photodiode mounted in a high speed packaging environ- ment to exploit the wide band- width performance of the PIN. The optical interface is by means of an FC connector housing. The electrical interface is through an SMA compatible connector. The receptacle includes a standard two hole panel mounting flange. PDT0313-FC-A 5963-3561E (11/94)PDT0313-FC-A Specifications Absolute Maximum Ratings Absolute maximum limits mean that no catastrophic damage will occur if the product is subjected to these ratings for short periods, provided each limiting parameter is in isolation and all other parameters have values within the performance specification. It should not be assumed that limiting values of more than one parameter can be applied to the product at the same time. Parameter Minimum Maximum Units Reverse Voltage - 15 Vv Forward Voltage - 0.5 Vv Forward Current - 5 mA Optical Power - 5 mW Operating Temperature -20 65 iO The following are measured with a bias of +5 volt to the center conductor of the electrical connnector with 9/125 nm single mode fiber, and at 25C, unless specified. Optical Specification Parameter Minimum Maximum Units Responsivity @ 1300 nm 0.75 - A/W Responsivity @ 1550 nm 0.8 : A/W Operating Wavelength 1100 1650 nm Optical Return Loss 22 - dB Electrical Specification Parameter Minimum Maximum Units Bandwidth (-3 dB, 50 2) referred to 130 MHz 6 10 GHz Ripple - 1.5 dB Dark Current - 2 nA Patch Cord The product is supplied with a single mode patch cord, with one end coated to give >22 dB optical return loss. 501PDT0313 rE i | Schematics Product Product Part Code Marking Number PDT0313 PDT0313 105082.002 | | 19a _! @R @Q OP - -}}--~-~ id | NOTE: MICROWAVE SIGNAL OUTPUT IS FROM AN "SMA" COMPATIBLE CONNECTOR. (DIMENSIONS @P x D) 502 an c eo 4 8,92 ALL DIMENSIONS IN MILLIMETERS 1 9.48Ordering Information Please order part number PDT0313-FC-A Handling Precautions 1. The PDT0313-FC-A can be damaged by current surges of overvoltage. Power supply transient precautions should be taken. 2. Normal handling precautions for electrostatic sensitive devices should be taken. 503