(R) Electrocomponents Series 219 Data Sheet SMD DIP Switch Surface Mount DIP Switch -- Auto Placeable Features Optimized Mechanical Features * Removable tape seal to withstand IR vapor phase or wave soldering temperatures, and board washing * Positive detent separate from contactor * Available low profile, medium, and extended height actuators * Gull-wing and "J" lead terminal configurations * Tube or tape and reel packaging available Optimized Contact System * Redundant, wiping contact * Contactor does not deflect during actuation Premium Materials * Gold plated beryllium copper contacts * High temperature materials (UL94V-0) * RoHS compliant Electrical and Mechanical Specifications Switch Function SPST- 2 through 10 and 12 positions Switch Contact Resistance 25 milliohms maximum initial 50 milliohms maximum at the end of life Insulation Resistance 1,000 megohms minimum between insulated terminals Dielectric Strength 500 VDC for 1 minute between adjacent switches Nonswitching Rating 100 mA or 50 VDC maximum Switch Capacitance 5 pF maximum between adjacent closed switches Operating Temperature - 55C to +85C Actuation Life 2,000 cycles switching 100 mA @ 20 VDC or 0.1 mA @ 5 VDC (dry circuit) 1-2 CTS Electrocomponents Coplanarity 0.10mm (.004") maximum Allowable Solder Time Up to 60 seconds at 260C Vibration Per MIL-STD-202F, method 204D, condition B (.06" or 15 G's between 10 HZ to 2K HZ) with no contact inconsistencies greater than 1 microsecond. Shock Per MIL-STD-202F, method 213B, condition A (50 G's) with no contact inconsistencies greater than 1 microsecond. Sealing Standard bottom seal Optional top tape seal Marking Special marking available consult CTS. Packaging Standard : Anti-static tube packaging Optional : Tape and reel packaging (c) 2008 CTS Corporation. All rights reserved. Information subject to change. 12/30/08 www.ctscorp.com CTS SERIES 219 SMT CONTACT FEATURES 1. Value of Redundant (Bifurcated) Gold Plated Contacts: Redundancy dramatically reduces the probability of contact failure while gold contact material provides the highest environmental protection, IMPROVING RELIABILITY. "A" Overall Dimension 6.55/.258 9.09/.358 11.63/.458 14.17/.558 16.71/.658 19.25/.758 21.79/.858 24.33/.958 26.87/1.058 31.95/1.258 2. Value of Wiping Contact Action: Clean contact area, IMPROVING RELIABILITY. 3. Value of Contactor Not Deflecting During Actuation: Constant contact pressure eliminates overstressing contacts, IMPROVING RELIABILITY. 4. Value of Detent Separate from Contactor: Separate detent allows optimization of nondeflecting contactor and detent designs, IMPROVING RELIABILITY. 2. Wiping contact action 1. Redundant (bifurcated) gold plated cross radial contactor 4. Detent separate from contactor 3. Contactor does not deflect during actuation Gull Wing Terminals Medium Height Actuator "J" Bend Terminals Low Profile Actuator 1.0 X45 CHAMFER (2) .039 TRAVEL 0.70 .028 DATE CODE CTS DATE CODE ON 1 2 3 4 5 10 1.50 .059 TYP. 2.54 .100 TYP. 11 12 1 0.550.08 .022.003 +0.05 3.80 -0.10 .150 +.002 -.004 2 4 3 5 10 11 12 1.50 .059 TYP. 8.00 .315 +0.13 0.25 -0.00 +.005 .010 -.000 "A" 8.00 .315 0.30 .012 +0.05 3.80 -0.10 .150 +.002 -.004 STANDOFF 0.250.10 .010.004 SOLDER COATED CTS 2.54 .100 TYP. TYP. "A" 0.30 .012 0.55 .022 3.62 .143 6.700.25 .264.010 219 6.700.25 3.62 .264.010 .143 1.0 X45 CHAMFER (2) .039 TRAVEL 0.70 .028 219 ON No. of Switch positions 2 3 4 5 6 7 8 9 10 12 1.50 .059 7.620.20 .300.008 9.910.08 .390.003 Gull Wing Surface Mount Pad Layouts 0.550.08 .022.003 STANDOFF 1.270.10 .050.004 8.51 .335 MAX TYP. 1.3 .050 "J" Bend Surface Mount Pad Layouts 2.44 .096 6.17 .243 8.60 .339 2.54 .100 TYP. 1.13 .044 Ordering Information 11.04 .435 4.57 .180 6.73 .265 TYP. DIMENSION: 219 - 12 XX: NO. OF POSITIONS E: EXTENDED HEIGHT ACTUATOR(0.60mm/.024") M: MEDIUM HEIGHT ACTUATOR(0.25mm/.010") LP: LOW PROFILE ACTUATOR(Flush) mm LP S 1.13 .044 TYP. 2.54 .100 TYP. inch T J R 8.89 .350 F BLANK: SHIP AT ON POSITION F: SHIP AT OFF POSITION BLANK : ANTI-STATIC TUBE PACKAGING R: TAPE AND REEL PACKAGING BLANK: GULL-WING TERMINAL J: "J" BEND TERMINAL BLANK: NO TOP TAPE SEAL * T : TOP TAPE SEAL * Not available on extended actuator S: BOTTOM SEAL (c) 2008 CTS Corporation. All rights reserved. Information subject to change. 2-2 CTS Electronic Components 12/30/08 www.ctscorp.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: CTS: 219-2MSTR 219-3LPSTR 219-3MSTR 219-5LPSTR 219-5MSTR 219-6LPSTR 219-6MSTR 219-7LPSTR 2197MSTR 219-8LPSTR 219-8MSTR 219-9LPSTR 219-9MSTR 219-10LPSTR 219-10MSTR 219-12LPSTR 21912MSTR 219-10LPST 219-10MST 219-12LPST 219-12MST 219-2LPST 219-2LPSTR 219-2MST 219-3LPST 219-3MST 219-4LPST 219-4MST 219-5LPST 219-5MST 219-6LPST 219-6MST 219-7LPST 219-8LPST 2198MST 219-9LPST 219-4LPSTR 219-4LPSTRF 219-7MST 219-4MSTR 219-9MST 219-6LPSTJ 219-5LPSTJ 2196MSTJ 219-8LPSTJ 219-8LPS 219-6MSTRF 219-4ES 219-3MSTJ 219-2LPSTRF 219-4LPSTJRF 219-4MSTJR 219-6LPS 219-9LPS 219-12ESF 219-9MSTJR 219-2MS 219-2LPSTF 219-8LPSTF 219-2MSTRF 219-4MSTF 219-3LPSTJ 219-8MSTJ 219-4LPSTJR 219-4MS 219-8MS 219-3LPS 219-4MSTRF 219-4LPS 219-4MSTJRF 219-4LPSTP