Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN FEATURES * Polarized aluminium electrolytic capacitors, non-solid * Axial leads, cylindrical aluminium case, insulated with a blue sleeve handbook, 4 columns * Mounting ring version (single ended) not insulated * Case 10 x 30 to 21 x 40 mm with pressure relief MBB121 * Taped versions up to 15 x 30 mm available for automatic insertion * Charge and discharge proof Fig.1 Component outlines. * Long useful life: 10000 to 15000 hours at 85 C, high reliability * High ripple current capability. handbook, columns 042/0432ASH APPLICATIONS high voltage * General industrial, power supplies, telecommunication, EDP 133 ALL-DIN (HV) 132 ALL-DIN (LV) * Coupling, decoupling, timing; smoothing, filtering and buffering in SMPS longer life 119 AHT-DIN 125 C CCB052 smaller dimensions * For use where low mounting height is important 138 AML 105 C * Vibration and shock resistant. QUICK REFERENCE DATA DESCRIPTION Case sizes (Dnom x Lnom in mm) VALUE 6.5 x 18 and 8 x 18 10 x 18 and 10 x 25 Rated capacitance range, CR 1 to 4700 F Tolerance on CR -10 to +50% 10 x 30 to 21 x 40 10 to 350 V Rated voltage range, UR -40 to +85 C Category temperature range Endurance test at 105 C 2000 hours 2000 hours - Endurance test at 85 C 6000 hours 8000 hours 8000 hours Useful life at 105 C 3000 hours 3000 hours - Useful life at 85 C 10000 hours 15000 hours 15000 hours Useful life at 40 C, 1.8 x IR applied 160000 hours 240000 hours 240000 hours Shelf life at 0 V, 85 C 500 hours Based on sectional specification IEC 384-4/CECC 30300 Detail specification UTE C031/C033 (without approval) Climatic category IEC 68 1998 Jan 29 40/085/56 396 Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN Selection chart for CR, UR and relevant nominal case sizes (Dnom x Lnom in mm) Preferred types in bold. UR (V) CR (F) 10 16 25 40 63 100 160 250 350 1.0 - - - - - 6.5 x 18 - - 6.5 x 18 2.2 - - - - - 6.5 x 18 6.5 x 18 4.7 - - - - 6.5 x 18 6.5 x 18 8 x 18 10 x 18 10 x 18 - - - - 6.5 x 18 8 x 18 10 x 18 10 x 25 12.5 x 30(1) - - - - - - - 6.5 x 18 - - - - - - 6.5 x 18 - - - - - 68 - - - - 10 x 30 100 - - 10 x 18 10 x 30 15 x 30 18 x 30(1) 150 - - 12.5 x 30 15 x 30 18 x 30 10 x 25 12.5 x 30 10 22 47 8 x 18 220 - - 330 470 - 12.5 x 30 - 8 x 18 - 10 x 18 - 12.5 x 30 10 x 25 12.5 x 30 12.5 x 30 - 10 x 18 - 10 x 25 - - 10 x 30(1) 10 x 18 10 x 25 15 x 30(1) 10 x 30 - 12.5 x 30 15 x 30(1) 10 x 30(1) 8 x 18 - 30(1) 15 x 30(1) 18 x 30(1) 18 x 40(1) 12.5 x - - - 18 x - 40(1) 21 x 40(1) 21 x 40(1) - 18 x 40(1) - - 21 x 40(1) 15 x 30 18 x 40 - - - - - - - - 15 x 30 18 x 30 18 x 40 - - - - - - - - - 15 x 30 18 x 40 21 x 40 - - - - - - - - - - 10 x 25 12.5 x 30 12.5 x 30 8 x 18 8 x 18 - 8 x 18 680 12.5 x 30 15 x 30 18 x 30 18 x 30 21 x 40 - - - - 1000 15 x 30 15 x 30 18 x 30 18 x 40 21 x 40 - - - - 1500 18 x 30 18 x 30 18 x 40 21 x 40 - - - - - 2200 18 x 30 18 x 40 21 x 40 21 x 40 - - - - - 3300 18 x 40 21 x 40 - - - - - - - 4700 21 x 40 21 x 40 - - - - - - - Note A 1. For these CV-values see data sheet "041-043 ASH ". 1998 Jan 29 397 Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN MECHANICAL DATA, AVAILABLE FORMS AND PACKAGING QUANTITIES 73 handbook, halfpage 1.6 O D L Od + MBC193 - 1 F Dimensions in mm. Form BR: Taped on reel, case D x L = 6.5 x 18 to 15 x 30 mm. Form BA: Taped in box (ammopack), case D x L = 6.5 x 18 to 10 x 25 mm. For dimensions see Table 1. Tape dimensions are specified in this handbook, Section "Packaging". Fig.2 Dimensional outline; Forms BA and BR. l handbook, full pagewidth L 33 1 d D CCB086 F Dimensions in mm. Form AA: Axial in box, case D x L = 10 x 30 to 21 x 40 mm For case sizes 18 x 40 mm and 21 x 40 mm, the stated L may be exceeded by 0.7 mm. For dimensions see Table 1. Fig.3 Dimensional outline; Form AA. 1998 Jan 29 398 Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based Table 1 132/133 ALL-DIN Axial; physical dimensions, mass and packaging quantities; see Figs 2 and 3 NOMINAL CASE SIZE D x L (mm) CASE CODE AXIAL: FORM AA, BA, and BR 6.5 x 18 8 x 18 10 x 18 10 x 25 10 x 30 12.5 x 30 15 x 30 18 x 30 18 x 40 21 x 40 4 5 6 7 00 01 02 03 04 05 PACKAGING QUANTITIES d (mm) l (mm) Dmax (mm) Lmax (mm) Fmin (mm) 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 - - - - 55 1 55 1 55 1 55 1 34 1 34 1 6.9 8.5 10.5 10.5 10.5 13.0 15.5 18.5 18.5 21.5 18.5 18.5 18.5 25.0 30.5 30.5 30.5 30.5 41.5 41.5 25 25 25 30 35 35 35 35 45 45 MASS (g) 1.3 1.7 2.5 3.3 4.8 7.4 11.7 12.9 19.4 24.7 FORM AA - - - - 200 200 200 200 100 100 FORM BA FORM BR 1000 500 500 500 - - - - - - 1000 500 500 500 500 400 250 - - - D handbook, full pagewidth 120 (3x) 3.6 +0.2 -0.4 D3 90 2 (3x) L 1.05 +0.03 (3x) -0.1 1.3 0 (3x) -0.05 d2 1.3 +0.1 (3x) 0 mounting holes Dimensions in mm. Form MR: case D x L = 15 x 30 to 21 x 40 mm. Case not insulated (insulation on request). Especially for applications with severe shocks and vibrations. For dimensions see Table 2. 1 +1.0 -0.5 d1 D2 CCB063 Fig.4 Mounting hole diagram and outline; Form MR; single ended with mounting ring and pins. Table 2 Single ended; physical dimensions, mass and packaging quantities; see Fig.4 NOMINAL CASE SIZE D x L (mm) CASE CODE SINGLE ENDED WITH MOUNTING RING: FORM MR 15 x 30 02 18 x 30 MASS (g) PACKAGING QUANTITIES d2 (mm) Dmax (mm) D2max (mm) D3 (mm) Lmax (mm) 0.8 1.0 +0.4 15.5 17.5 16.5 0.2 33 11.7 200 03 0.8 1.0 +0.4 18.5 19.5 18.5 0.2 33 12.9 200 18 x 40 04 0.8 1.0 +0.4 18.5 19.5 18.5 0.2 45 19.4 100 21 x 40 05 0.8 1.0 +0.4 21.5 22.5 21.5 0.2 45 24.7 100 1998 Jan 29 d1 (mm) 399 A Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN ELECTRICAL DATA Unless otherwise specified, all electrical values in Tables 3, 5, 7 and 9 apply at Tamb = 20 C, P = 86 to 106 kPa, RH = 45 to 75%. SYMBOL DESCRIPTION CR rated capacitance at 100 Hz (tolerance -10 to +50%) IR rated RMS ripple current at 100 Hz, 85 C IL1 max. leakage current after 1 minute at UR IL5 max. leakage current after 5 minutes at UR Tan max. dissipation factor at 100 Hz ESR equivalent series resistance at 100 Hz (calculated from tan max and CR) Z max. impedance at 10 kHz or 100 kHz Table 3 UR (V) 10 16 Electrical data; preferred types in bold CR 100 Hz (F) NOMINAL CASE SIZE D x L (mm) IR 100 Hz 85 C (mA) IL1 1 min (A) IL5 5 min (A) Tan 100 Hz ESR 100 Hz () Z 10 kHz () Z 100 kHz () 220 8 x 18 190 25 8.4 0.18 1.3 0.73 0.70 470 12.5 x 30 350 32 9.4 0.18 0.61 0.26 0.60 680 12.5 x 30 460 45 13.6 0.18 0.42 0.20 0.40 1000 15 x 30 640 64 20 0.18 0.28 0.12 - 1500 18 x 30 800 94 30 0.22 0.23 0.10 - 2200 18 x 30 1100 140 44 0.22 0.16 0.09 - 3300 18 x 40 1300 200 66 0.27 0.13 0.05 - 4700 21 x 40 1800 290 94 0.27 0.09 0.05 - 47 6.5 x 18 95 11 0.14 4.7 2.6 2.2 100 8 x 18 150 19 0.14 2.2 1.2 1.1 220 10 x 18 250 38 11 0.14 1.0 0.55 0.55 330 10 x 25 320 56 14.6 0.14 0.67 0.36 0.36 330 12.5 x 30 320 36 10.6 0.14 0.67 0.36 0.60 5.5 7.2 470 10 x 25 450 78 19 0.14 0.47 0.26 0.26 470 12.5 x 30 450 49 15 0.14 0.47 0.26 0.40 680 15 x 30 550 69 22 0.14 0.33 0.14 - 1000 15 x 30 780 100 32 0.14 0.22 0.12 - 1500 18 x 30 950 150 48 0.15 0.16 0.10 - 2200 15 x 40 1300 220 70 0.15 0.11 0.06 - 3300 21 x 40 1600 320 110 0.15 0.07 0.05 - 4700 21 x 40 2300 460 150 0.15 0.05 0.05 - 1998 Jan 29 400 Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN ORDERING INFORMATION Ordering example Electrolytic capacitor 132 series 100 F/40 V; -10/+50% Nominal case size: 10 x 18 mm; Form BR Catalogue number: 2222 132 27101. Table 4 Ordering information; preferred types in bold CATALOGUE NUMBER 2222 . . . UR (V) 10 16 CR 100 Hz (F) NOMINAL CASE SIZE D x L (mm) CASE CODE AXIAL . . . . . SINGLE ENDED IN BOX FORM AA TAPED ON REEL FORM BR TAPED IN BOX FORM BA MOUNTING RING FORM MR 220 8 x 18 5 - 132 24221 132 34221 - 470 12.5 x 30 01 132 14471 132 24471 - - 680 12.5 x 30 01 132 14681 132 24681 - - 1000 15 x 30 02 132 14102 132 24102 - 132 44102 1500 18 x 30 03 132 14152 - - 132 44152 2200 18 x 30 03 132 14222 - - 132 44222 3300 18 x 40 04 132 14332 - - 132 44332 4700 21 x 40 05 132 14472 - - 132 44472 47 6.5 x 18 4 - 132 25479 132 35479 - 100 8 x 18 5 - 132 25101 132 35101 - 220 10 x 18 6 - 132 25221 132 35221 - 330 10 x 25 7 - 132 90508 132 90509 - 330 12.5 x 30 01 132 15331 132 25331 - - 470 10 x 25 7 - 132 90507 132 90502 - 470 12.5 x 30 01 132 15471 132 25471 - - 680 15 x 30 02 132 15681 132 25681 - 132 45681 1000 15 x 30 02 132 15102 132 25102 - 132 45102 1500 18 x 30 03 132 15152 - - 132 45152 2200 15 x 40 04 132 15222 - - 132 45222 3300 21 x 40 05 132 15332 - - 132 45332 4700 21 x 40 05 132 15472 - - 132 45472 1998 Jan 29 401 A Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN ELECTRICAL DATA (continued) Table 5 UR (V) 25 40 Electrical data continued; preferred types in bold CR 100 Hz (F) NOMINAL CASE SIZE D x L (mm) IR 100 Hz 85 C (mA) IL1 1 min (A) IL5 5 min (A) Tan 100 Hz ESR 100 Hz () Z 10 kHz () Z 100 kHz () 22 6.5 x 18 60 0.11 8.0 4.1 2.9 220 10 x 25 340 58 15 0.11 0.8 0.40 0.40 220 12.5 x 30 340 37 11 0.11 0.8 0.40 0.60 330 12.5 x 30 410 54 16.5 0.11 0.53 0.30 0.40 470 12.5 x 30 560 75 24 0.11 0.37 0.20 - 680 18 x 30 700 106 34 0.11 0.26 0.10 - 1000 18 x 30 1000 150 50 0.11 0.17 0.10 - 8.5 5.1 1500 18 x 40 1100 230 75 0.12 0.13 0.06 - 2200 21 x 40 1850 330 110 0.13 0.09 0.05 - 47 8 x 18 120 22 0.09 3.0 1.6 1.4 100 10 x 18 210 43 12 0.09 1.4 0.75 0.75 150 10 x 25 310 63 16 0.09 0.95 0.50 0.50 150 12.5 x 30 310 40 12 0.09 0.95 0.50 0.60 220 12.5 x 30 410 57 17.5 0.09 0.65 0.34 0.40 330 15 x 30 550 83 26 0.09 0.43 0.20 - 470 15 x 30 700 120 38 0.09 0.30 0.16 - 7.8 680 18 x 30 900 170 54 0.09 0.21 0.10 - 1000 18 x 40 1200 240 80 0.09 0.14 0.08 - 1500 21 x 40 1500 360 120 0.10 0.10 0.06 - 2200 21 x 40 1900 530 180 0.10 0.07 0.05 - 1998 Jan 29 402 Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN ORDERING INFORMATION (continued) Table 6 Ordering information continued; preferred types in bold CATALOGUE NUMBER 2222 . . . UR (V) 25 40 CR 100 Hz (F) 22 NOMINAL CASE SIZE D x L (mm) 6.5 x 18 CASE CODE 4 AXIAL . . . . . SINGLE ENDED IN BOX FORM AA TAPED ON REEL FORM BR TAPED IN BOX FORM BA MOUNTING RING FORM MR - 132 26229 132 36229 - 220 10 x 25 7 - 132 90503 132 90504 - 220 12.5 x 30 01 132 16221 132 26221 - - 330 12.5 x 30 01 132 16331 132 26331 - - 470 12.5 x 30 01 132 16471 132 26471 - - 680 18 x 30 03 132 16681 - - 132 46681 1000 18 x 30 03 132 16102 - - 132 46102 1500 18 x 40 04 132 16152 - - 132 46152 2200 21 x 40 05 132 16222 - - 132 46222 47 8 x 18 5 - 132 27479 132 37479 - 100 10 x 18 6 - 132 27101 132 37101 - 150 10 x 25 7 - 132 90511 132 90512 - 150 12.5 x 30 01 132 17151 132 27151 - - 220 12.5 x 30 01 132 17221 132 27221 - - 330 15 x 30 02 132 17331 132 27331 - 132 47331 470 15 x 30 02 132 17471 132 27471 - 132 47471 680 18 x 30 03 132 17681 - - 132 47681 1000 18 x 40 04 132 17102 - - 132 47102 1500 21 x 40 05 132 17152 - - 132 47152 2200 21 x 40 05 132 17222 - - 132 47222 A 1998 Jan 29 403 Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN ELECTRICAL DATA (continued) Table 7 UR (V) 63 100 Electrical data continued; preferred types in bold CR 100 Hz (F) NOMINAL CASE SIZE D x L (mm) IR 100 Hz 85 C (mA) IL1 1 min (A) IL5 5 min (A) Tan 100 Hz ESR 100 Hz () Z 10 kHz () Z 100 kHz () 6.5 x 18 38 6.0 4.6 0.07 24 10 6.5 x 18 64 9.3 5.3 0.07 11 22 8 x 18 100 17 6.8 0.07 47 10 x 18 170 33 9.9 0.07 68 10 x 25 210 46 12.6 0.07 1.6 0.81 0.60 68 10 x 30 210 30 8.6 0.07 1.6 0.80 0.60 100 10 x 30 300 42 12.6 0.07 1.1 0.60 0.40 150 15 x 30 350 61 19 0.07 0.74 0.37 - 220 15 x 30 520 87 28 0.07 0.50 0.25 - 330 18 x 30 600 130 42 0.07 0.34 0.15 - 470 18 x 40 970 180 59 0.07 0.24 0.12 - 680 21 x 40 1000 260 86 0.07 0.16 0.08 - 1000 21 x 40 1600 380 130 0.07 0.11 0.06 - 4.7 12 5 5.5 3.3 5.1 2.5 2.1 2.4 1.2 1.2 1 6.5 x 18 20 4.0 4.0 0.06 95 45 6 2.2 6.5 x 18 30 5.2 4.4 0.06 43 20 5 4.7 6.5 x 18 48 7.7 4.9 0.06 20 9.6 4 10 8 x 18 73 13 6 0.06 9.5 4.5 2.8 22 10 x 18 130 25 8.4 0.06 4.3 2 1.3 47 10 x 25 220 50 13.4 0.06 2.0 1 0.90 47 10 x 30 220 32 9.4 0.06 2.0 1 0.90 68 12.5 x 30 250 45 13.5 0.06 1.4 0.80 - 100 15 x 30 380 64 20 0.06 0.95 0.50 - 150 18 x 30 400 94 30 0.06 0.64 0.35 - 220 18 x 40 660 140 44 0.06 0.43 0.20 - 330 18 x 40 700 200 66 0.06 0.29 0.15 - 470 21 x 40 1200 290 94 0.06 0.20 0.10 - 1998 Jan 29 404 Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN ORDERING INFORMATION (continued) Table 8 Ordering information continued; preferred types in bold CATALOGUE NUMBER 2222 . . . UR (V) CR 100 Hz (F) 63 4.7 NOMINAL CASE SIZE D x L (mm) CASE CODE 6.5 x 18 4 AXIAL . . . . . SINGLE ENDED IN BOX FORM AA TAPED ON REEL FORM BR TAPED IN BOX FORM BA MOUNTING RING FORM MR - 132 28478 132 38478 - 10 6.5 x 18 4 - 132 28109 132 38109 - 22 8 x 18 5 - 132 28229 132 38229 - 47 10 x 18 6 - 132 28479 132 38479 - 68 10 x 25 7 - 132 90513 132 90514 - 68 10 x 30 00 132 18689 132 28689 - - 100 10 x 30 00 132 18101 132 28101 - - 150 15 x 30 02 132 18151 132 28151 - 132 48151 220 15 x 30 02 132 18221 132 28221 - 132 48221 330 18 x 30 03 132 18331 - - 132 48331 470 18 x 40 04 132 18471 - - 132 48471 680 21 x 40 05 132 18681 - - 132 48681 1000 21 x 40 05 132 18102 - - 132 48102 1 6.5 x 18 4 - 132 29108 132 39108 - 100 2.2 6.5 x 18 4 - 132 29228 132 39228 - 4.7 6.5 x 18 4 - 132 29478 132 39478 - 10 8 x 18 5 - 132 29109 132 39109 - 22 10 x 18 6 - 132 29229 132 39229 - 47 10 x 25 7 - 132 90505 132 90506 - 47 10 x 30 00 132 19479 132 29479 - - 68 12.5 x 30 01 132 19689 132 29689 - - 100 15 x 30 02 132 19101 132 29101 - 132 49101 150 18 x 30 03 132 19151 - - 132 49151 220 18 x 40 04 132 19221 - - 132 49221 330 18 x 40 04 132 19331 - - 132 49331 470 21 x 40 05 132 19471 - - 132 49471 1998 Jan 29 405 A Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN ELECTRICAL DATA (continued) Table 9 Electrical data continued; preferred types in bold NOMINAL CASE SIZE D x L (mm) IR 100 Hz 85 C (mA) IL1 1 min (A) IL5 5 min (A) Tan 100 Hz ESR 100 Hz () Z 10 kHz () 2.2 6.5 x 18 22 50 20 0.10 72 55 30 4.7 8 x 18 37 50 20 0.10 34 26 20 10 10 x 18 61 50 20 0.10 16 12 10 22 10 x 25 120 50 20 0.10 2.2 8 x 18 25 50 20 0.10 72 50 30 4.7 10 x 18 37 50 20 0.10 34 23 16 10 10 x 25 66 50 20 0.10 16 11 9 1 UR (V) CR 100 Hz (F) 160 250 350 7.2 5.5 Z 100 kHz () 2.5 6.5 x 18 15 50 20 0.10 160 100 40 2.2 8 x 18 25 50 20 0.10 72 45 28 4.7 10 x 18 43 50 20 0.10 34 21 15 1998 Jan 29 406 Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN ORDERING INFORMATION (continued) Table 10 Ordering information continued; preferred types in bold CATALOGUE NUMBER 2222 . . . UR (V) CR 100 Hz (F) 160 2.2 NOMINAL CASE SIZE D x L (mm) CASE CODE 6.5 x 18 4 AXIAL . . . . . SINGLE ENDED IN BOX FORM AA TAPED ON REEL FORM BR TAPED IN BOX FORM BA MOUNTING RING FORM MR - 133 21228 133 31228 - 8 x 18 5 - 133 21478 133 31478 - 10 10 x 18 6 - 133 21109 133 31109 - 22 10 x 25 7 - 133 90502 133 90503 - 4.7 2.2 8 x 18 5 - 133 23228 133 33228 - 4.7 10 x 18 6 - 133 23478 133 33478 - 10 10 x 25 7 - 133 23109 133 33109 - 1 250 350 6.5 x 18 4 - 133 25108 133 35108 - 2.2 8 x 18 5 - 133 25228 133 35228 - 4.7 10 x 18 6 - 133 25478 133 35478 - MARKING The capacitors are marked (where possible) with the following information: * Rated capacitance (in F) * Tolerance on rated capacitance, code letter in accordance with "IEC 62" * Rated voltage (in V) * Upper category temperature (85 C) * Group number (132 or 133) * Name of manufacturer (PHILIPS) * Date code, in accordance with "IEC 62" * Code indicating factory of origin A * Band to identify the negative terminal. 1998 Jan 29 407 Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN ELECTRICAL DATA (continued) Additional electrical data PARAMETER VALUE CONDITIONS AXIAL SINGLE ENDED Voltage Surge voltage for short periods Us 1.15 x UR Us 1.1 x UR Urev 1 V UR = 10 to 250 V UR = 350 V Reverse voltage Current Leakage current after 1 minute: case D x L = 6.5 x 18 to 10 x 25 mm: UR = 10 to 100 V UR = 160 to 350 V case D x L = 10 x 30 to 21 x 40 mm: UR = 10 to 100 V after 5 minutes: case D x L = 6.5 x 18 to 10 x 25 mm: UR = 10 to 100 V UR = 160 to 350 V case D x L = 10 x 30 to 21 x 40 mm: UR = 10 to 100 V IL1 0.01CR x UR + 3 A IL1 50 A IL1 0.006CR x UR + 3 A IL5 0.002CR x UR + 4 A IL5 20 A IL5 0.002CR x UR + 4 A Inductance Equivalent series inductance (ESL) 1998 Jan 29 case D x L mm: 6.5 x 18 8 x 18 10 x 18 10 x 25 10 x 30 12.5 x 30 15 x 30 18 x 30 18 x 40 21 x 40 typ. 15 nH typ. 35 nH typ. 69 nH typ. 38 nH typ. 38 nH typ. 46 nH typ. 48 nH typ. 50 nH typ. 54 nH typ. 59 nH 408 - - - - - - typ. 39 nH typ. 39 nH typ. 39 nH typ. 39 nH Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN Capacitance (C) MGB234 handbook, 4 columns 1.10 1 C C0 3 1.05 2 1.00 0.95 2 3 0.90 1 0.85 Curve 1: 10 V. Curve 2: 63 V. Curve 3: 100 V. C0 = capacitance at 20 C, 100 Hz. 40 0 40 80 T amb ( oC) Fig.5 Typical multiplier of capacitance as a function of ambient temperature. MGB235 1.05 handbook, 4 columns C C0 1.00 2 0.95 A 0.90 3 0.85 1 0.80 Curve 1: 10 V. Curve 2: 63 V. Curve 3: 100 V. C0 = capacitance at 20 C, 100 Hz. 0.75 10 102 103 104 f (Hz) Fig.6 Typical multiplier of capacitance as a function of frequency. 1998 Jan 29 409 Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN Dissipation factor (tan ) MGB236 10 handbook, 4 columns tan 1 10 1 1 2 Curve 1: 16 V. Curve 2: 100 V. Case D x L = 6.5 x 18 to 10 x 25 mm. f = 100 Hz. 10 2 60 40 20 0 20 40 60 80 100 T amb ( oC) Fig.7 Typical tan as a function of ambient temperature. MGB237 10 handbook, 4 columns 1 tan 1 2 10 1 Curve 1: 16 V. Curve 2: 100 V. Case D x L = 6.5 x 18 to 10 x 25 mm. Tamb = 20 C. 10 2 10 10 2 104 f (Hz) Fig.8 Typical tan as a function of frequency. 1998 Jan 29 103 410 Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN Impedance (Z) MBC408 10 2 handbook, 4 columns Z () 10 1 1 2 3 4 10 1 Curve 1: 4.7 F, 100 V. Curve 2: 47 F, 16 V. Curve 3: 150 F, 16 V. Curve 4: 220 F, 16 V. Curve 5: 470 F, 16 V. Case D x L = 6.5 x 18 to 10 x 25 mm. f = 10 kHz. 5 10 2 60 40 20 0 20 40 60 80 100 T amb ( oC) Fig.9 Typical impedance as a function of ambient temperature. MBC407 10 3 handbook, 4 columns Z () 1 10 2 A 2 10 3 4 1 Curve 1: 4.7 F, 100 V. Curve 2: 47 F, 16 V. Curve 3: 150 F, 16 V. Curve 4: 220 F, 16 V. Curve 5: 470 F, 16 V. Case D x L = 6.5 x 18 to 10 x 25 mm. Tamb = 20 C. 10 1 2 10 5 10 3 104 Fig.10 Typical impedance as a function of frequency. 1998 Jan 29 411 105 f (Hz) 10 6 Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN RIPPLE CURRENT AND USEFUL LIFE Table 11 Multiplier of ripple current (IR/IRO) as a function of frequency; IRO = ripple current at 85 C, 100 Hz IR MULTIPLIER FREQUENCY (Hz) UR = 10 to 16 V UR = 25 to 63 V UR = 100 to 350 V 50 0.95 0.9 0.85 100 1.0 1.0 1.0 300 1.07 1.12 1.2 1000 1.12 1.2 1.3 3000 1.15 1.25 1.35 1.2 1.3 1.4 10000 MBC243 3.3 handbook, full pagewidth IA 3.2 IR 3.1 3.0 2.8 2.6 2.4 lifetime multiplier 2.2 0 1. 5 1. 2.0 0 2. 0 3. 1.8 4. 0 1.6 0 6. 15 20 (1) 30 50 70 1.2 1.0 0.8 0.5 0.0 10 1.4 40 50 60 70 80 90 100 T amb ( oC) IA = actual ripple current at 100 Hz. IR = rated ripple current at 100 Hz, 85 C. (1) Useful life at 85 C and IR applied; case D x L = 6.5 x 18 and 8 x 18 mm: 10000 hours case D x L = 10 x 18 to 21 x 40 mm: 15000 hours. Fig.11 Multiplier of useful life as a function of ambient temperature and ripple current load. 1998 Jan 29 412 Philips Components Product specification Aluminium electrolytic capacitors Axial Long Life, DIN-based 132/133 ALL-DIN SPECIFIC TESTS AND REQUIREMENTS General tests and requirements are specified in this handbook, Section "Tests and Requirements" . Table 12 Test procedures and requirements TEST NAME OF TEST Endurance REFERENCE IEC 384-4/ CECC 30300, subclause 4.13 PROCEDURE (quick reference) Tamb = 85 C; UR applied; case D x L = 6.5 x 18 and 8 x 18 mm: 6000 hours; case D x L = 10 x 18 to 21 x 40 mm: 8000 hours REQUIREMENTS UR = 10 to 160 V; C/C: 15% UR = 250 to 350 V; C/C: 10% tan 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit Useful life CECC 30301, subclause 1.8.1 Tamb = 85 C; UR and IR applied; case D x L = 6.5 x 18 and 8 x 18 mm: 10000 hours; case D x L = 10 x 18 to 21 x 40 mm: 15000 hours UR = 10 to 160 V; C/C: 45% UR = 250 to 350 V; C/C: 30% tan 3 x spec. limit Z 3 x spec. limit IL5 spec. limit no short or open circuit total failure percentage: 1% Shelf life (storage at high temperature) IEC 384-4/ CECC 30300, subclause 4.17 Tamb = 85 C; no voltage applied; 500 hours after test: UR to be applied for 30 minutes, 24 to 48 hours before measurement C/C, tan , Z: for requirements see `Endurance test' above IL5 2 x spec. limit A 1998 Jan 29 413